Bugs in a Powerbook? (the little live creature bugs!!)

All of a sudden out of nowhere, in my BRAND NEW apartment, bugs have been appearing. And we all know where bugs migrate too, that's right, my glowing powerbook screen (even though I have all the lights on in the room). Now I try and get these buggers, but they're so fast that the run down to the space between the hinge of the display and the main body of the computer before I can try and get them without destroying my display while squishing away. So naturally I quick like pick up my powerbook and try and get them from down wherever I think they are, but they're always just magically gone. This has been going on for about once a day for a week.
Now this really isn't really a problem with Apple here, but they seem to keep disappearing in an area where there are air vents for the laptop. Do you think they're going in there? Wouldn't the heat scare 'em away? Are they getting fried once they get in? Is that why my fans are always on no matter what!? (Yes, I have the always running powerbook fans problem. I've given up. I just say it's a Tiger "bug" (hehe) because that's when it became a problem.) There doesn't seem to be anything I can do about this other then look for a hole in my wall or something, but I thought it was kinda a funny story, and I also do honestly worry about potential damage if they are going into Hades underworld that is my constantly 65C powerbook to be burnt to death. I haven't smelt any roosting bugs yet... but....

Fortunately, I don't have a cockroach problem, but instead some little winged creatures that are small enough to get inside that spot I'm talking about. So if they are indeed going in there, according to the article, they could build up over time and cause me problems after all.
I wonder what I can do about it....
1) I could take a can of compressed air and just blow 'em around in there
But then wouldn't they all just end up at the front and that wouldn't really fix anything...
2) Maybe I could like, take a vacuum and try that...
But I don't have a vacuum (wood flooring), and wouldn't that be like dangerous for electrical shocks and stuff?
I'll be in Tokyo in a few weeks and I've gotta go to the Apple store anyways to point out how their solution to my iPod problems is just resetting it is no longer acceptable since it needs to be done about once a week, so I'll ask them what they think. I'm sure any normal person would at least chuckle, so they'll probably sit there stone faced. Meh.

Similar Messages

It's the little things that bug me...

This is really a bit of a rant; though if someone can help to fix any of my problems that'd be great.
1. The way that all available midi notes in the entire song seem to appear on the Midi editor window (forget what it's called in Logic) if you double click on it (this must just be me, right??)
2. The way the scrolling works - if I have a loop of say four bars, Logic doesn't seem to be clever enough to realise it'd be nice if it didn't move the entire arrange page back and forward - that is; a loop which is small enough to fit on the screen doesn't automatically do that. And the follow song button seems to do nothing at times
3. The limiters - they don't work! I suffer awful PDC with the adaptive limiter on individual tracks, and neither of the limiters do what they're supposed to - ie. limit the signal!
4. When I solo one track, I always seem to get at least one other track through!
5. The CST reset toggle... it doesn't happen much, but when you do accidentally catch it you know about it... "undo", please!
So, I'm hoping these are easily fixed (well, probably not the limiter bit...) let me know your thoughts...
And this rant/mild whistleblowing isn't in place of a "feedback form" - I hope we can fix at least one of the problems!
Thanks,
Mickey.

1. The way that all available midi notes in the
entire song seem to appear on the Midi editor window
(forget what it's called in Logic) if you double
click on it (this must just be me, right??)
If you mean the Matrix Editor, you're describing what dbl-clilcking in a blank area of that editor is supposed to do. But probably like you, it's rare that I ever want to see that display. From time to time I'll accidentally call up this display when I think I'm dbl-clicking on a note (to see it in an Event Editor window) but I accidentally click on a blank space in the Matrix Editor instead.
I think this function, so rarely needed, should be modified so that it's invoked by having to hold down a modifier key+dbl click instead. But if you see the all-notes display and you didn't mean to see it, it's pilot error.
2. The way the scrolling works - if I have a loop of
say four bars, Logic doesn't seem to be clever enough
to realise it'd be nice if it didn't move the entire
arrange page back and forward - that is; a loop which
is small enough to fit on the screen doesn't
automatically do that. And the follow song button
seems to do nothing at times
True 'nuf. I'd recommend having the Catch function on a key command (mine's "A") and be able to turn it on and off as you see fit. Turning Catch off will solve this problem, but I agree that the problem you described is annoying.
3. The limiters - they don't work! I suffer awful PDC
with the adaptive limiter on individual tracks, and
neither of the limiters do what they're supposed to -
ie. limit the signal!
What's PDC?
4. When I solo one track, I always seem to get at
least one other track through!
I run into this too. Logic is buggy when it comes to certain Soloing operations. My advice would be to set up a key command for "deselect all tracks" or "deselect all objects" (it's one of those two). Hit this before you solo anything.
5. The CST reset toggle... it doesn't happen much,
but when you do accidentally catch it you know about
it... "undo", please!
CST?
And this rant/mild whistleblowing isn't in place of a
"feedback form" - I hope we can fix at least one of
the problems!
Since Apple is so secretive and un-communicative as a software manufacturer, and doesn't bother to acknowledge known and unknown issues with Logic, IMO the best thing you could do is post your problems here (as well as the feedback thing). This way other users will either be able to help you out, or, from your experience they'll learn something more about their system.
Anyway, that's my lil' rant on top of your rant.

Can I connect an external video camera to a mac book pro for viewing live video so I don't have to use the little screen on the camera?

Can I connect an external video camera to a mac book pro for viewing live video so I don't have to use the little screen on the camera?

Shadow30 wrote:
Can I connect an external video camera to a mac book pro for viewing live video so I don't have to use the little screen on the camera?
• Only if your video camera supports it. Depending on how your camera works, you may need to add preview software to your Mac to use this feature.
• Alternatively, your camera may also be able to record directly into your Mac while you are monitoring the Mac's display.
• If you are using a consumer camcorder that supports HDMI monitoring, a small HDTV might be an simpler solution than your Mac. For an example of how this is done, see http://youtu.be/GVpSkZD6qE4.
• The retailer who sold you your video camera may have other suggestions.
• If you need more professional results, an external preview monitor will offer more capability on compatible cameras.
Message was edited by: EZ Jim
Mac OSX 10.9.4

What happened to the little bug icon on the safari 5.1.3 toolbar?

What happened to the little bug icon on the safari 5.1.3 toolbar?

Hi ...
If you mean this: (but reporter icon), appaerenlty it's been removed from View > Customize Toolbar window.
edited by: cs

The little light keeps flickering on my powerbook!

Recently I noticed that the little light on the button that opens my powerbook keeps flickering while I'm using the computer. What gives?

Steven,
It's ok to be nervous, however resetting the PMU is simple. Shut down your PB. Unplug the AC adaptor, remove the battery and hold the power button down for 5 seconds. Reinsert the battery, plug the AC adaptor back and and restart the PB. You'll have to reset the time/date after this procedure. From there just use the PB as you would normally and monitor it to see if this issue reoccurs. If it does then consider taking a trip to the Apple store.
Jrsy
P.S. Just a reminder-always back up your important files.

Protective cap supplied on powerbook power supply (the little clear one)

Hi
I have managed to loose the little clear plastic cap that goes on the power supply when it is not plugged in to the powerbook.
As I want to keep everything clean and dirk free, I am after a new one.
Any ideas where (in the UK) I can get a replacement?

Cheers for the help, sorry about the time delay in the thanks, but have been kept away from the net with the day job..

The little 'down' arrow that used to live next to the forward and back arrows in the upper left of the navigation bar, is missing. It was handy to use to go back in big jumps without having to go back one step at a time. Can you please restore it?

When searching through a website, covering many pages of information, sometimes you just want to jump back to a page.
Using the little dow arrow was a handy way to see where you have been and to jump multiple steps/pages backwards without continuing to click back, back, back, until finally reaching where you were. I really use it a lot and am hoping you will either restore it or provide me with a new way to do the same thing.
Thank you!
Maggie

The arrow to open the tab history of the Back and Forward buttons has been removed in Firefox 4 and later.
Use one of these methods to open the tab history list:
* Right click on the Back or Forward button
* Hold down the left mouse button on the enabled Back or Forward button until the list opens
You can look at this extension:
* Backward Forward History Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

Ask the Experts Live Chat - Home Hub 4

Hello,
Stephanie and I are pleased to announce our next live discussion with some of our BT experts! It's about one of our latest new products, the Hub 4. This will be a great chance to get our Hub 4 experts onto the community to tell you a bit more about that and answer any questions you may have.
We have added the Chat transcript below for any of you guys who missed this event.
7:02
JacquiBT:
Hello everyone.
Thank for you joining our ‘Ask the Experts’ Live chat. I would like to introduce Dave, Sam and Emma who are our hub 4 experts and will be answering your questions tonight. I would like to invite you to ask your questions now.
7:03
[Comment From imjolly imjolly : ]
why are there no adsl stats available on the HH4
7:04
[Comment From DS DS : ]
evening all. Are the antennae omni directional?
7:05
Sean Donnelly:
Thanks for the question, Emma will respond
to that question Imjolly
7:05
JacquiBT:
Thanks DS, Dave will respond to your question now
7:05
Dave:
Hi DS, yes they are
7:05
[Comment From Steve Steve : ]
Are there any plans for new firmware on the hub 4 to bring new features?
7:06
JacquiBT:
Thanks Steve, Dave is answering that question for you
7:07
Dave:
Hi Steve - yes there are. There will be more information available about this - and any new features - before each firmware drop.
7:07
[Comment From Steve Steve : ]
why can you not opt out of BT WIFI on the home hub 4?
7:07
Dave:
Hi Steve - you should have no problem doing this through the Hub Manager
7:09
JacquiBT:
Some great questions coming through, the experts are typing up responses now
7:09
[Comment From DS DS : ]
Personal testing - Why is the 2.4GHz range less than the HH3 when at a distance from the hub, but better close up than the HH3?
7:10
JacquiBT:
Thanks DS, Dave is answering this now for you
7:10
[Comment From George George : ]
Will the 'Home Network' page show a HH4 instead of the Current image of the HH3?
7:11
JacquiBT:
Thanks George, Sam will answer that for you
7:11
Sam:
Hi George, the HH4 image will be displayed in place of the HH3 in the next firmware release
7:12
Dave:
Thanks again DS - you shouldn't find that, but this can depend on a lot of different factors in the home. I've found mine to be a bit better actually! But it should be pretty much the same for most customers.
7:12
Sean Donnelly:
Did you know the Hub 4 has Smart Setup?
Easy set up in just a few minutes. No CD or computer needed, it's all online and works on any device. Set up your Hub 4 router and access all your free extras like BT Cloud and BT Family Protection in just a few clicks.
7:12
[Comment From DS DS : ]
Is it possible for BT to allow us to move the BTWifi SSID's to another channel, leaving our own SSID on a less congested channel?
7:12
Dave:
Hi imjolly, sorry for the delay, Emma asked me to reply on her behalf. We have made the stats in the Hub manager simpler for customers to understand, we were reacting to feedback that it was too general for the wide range of customers and tech understandings.
7:12
JacquiBT:
Hi DS, Sam is replying to you now
7:14
[Comment From JamesS JamesS : ]
What speeds can I achieve over wifi, assuming I'm connected to 5ghz? Thanks.
7:14
Sean Donnelly:
Did you know the hub offers Easy Wireless?
Connect wirelessly by selecting your BT Home Hub connection on any compatible device and just push a button on the Hub and you're connected. It's that simple. No passwords needed.
7:14
JacquiBT:
Hi JamesS. Dave will reply to your question
7:14
Emma:
Hi imjolly, we have made the stats in the Hub manager simpler for customers to understand, we were reacting to feedback that it was too general for the wide range of customers and tech understandings.
7:15
Sam:
Hi DS, moving BT Wifi SSID's to another channel is not possible on the HH4. However, we are looking closely at the wi-fi SSID's the hub broadcasts to see whether we can improve this experience.
7:15
Dave:
Hi James, 5GHz maximum data transfer rate of 300Mb/s; this will tend to translate as an optimal actual speeds of up to 100 Mb/s - depending on lots of factors in your home
7:15
[Comment From George George : ]
Why did you remove the built in plastic wireless info tab with a card?
7:15
JacquiBT:
Hi George, Dave is going to reply to that question
7:16
Dave:
Hi George - this was part of the design process, we've tried to make it even easier for customers to find their wireless information. Now it's not integrated it's a little bit more accessible.
7:16
[Comment From thebennyboy thebennyboy : ]
I currently have the HH3 and would like to know what noticable difference it will make having a HH4 over a HH3? We use the ethernet ports and the wireless.
7:17
JacquiBT:
Hi Bennyboy. Emma is going to reply to that question.
7:17
[Comment From Paul Paul : ]
How much faster is the processor in the home hub 4, compared to previous versions? how will this effect my online experience?
7:18
JacquiBT:
Hi Paul. Sam will answer that for you
7:18
Sam:
Hi Paul, the processor is a staggering 3x faster compared to the HH3
7:19
[Comment From Guest Guest : ]
Although opted out of BT wifi the hub still shows as being active
7:19
JacquiBT:
Hi Guest, could we ask that you post this on the community so the moderators can pick this up
7:19
Sean Donnelly:
Did you know that the hub 4 offers Dual band frequency which makes for a more reliable wireless connection?
Smart dual-band technology reduces wireless interference and drop out’s giving you a reliable connection for all your devices.
7:20
[Comment From Guest Guest : ]
When you opt out of BT WIFI it appears to only opt out on the 2.4ghz channel and not the 5ghz channel. Are you looking into this?
7:20
JacquiBT:
Hi Guest. Dave will reply to your question
7:21
Dave:
Hi - thanks for this feedback, we'll definitely look in to it for you
7:21
Sean Donnelly:
Excellent questions coming through folks
7:21
Sean Donnelly:
Our experts are typing answers so please keep them coming
7:22
[Comment From Josh Josh : ]
Is it a known issue that the HomeHub 4 has problems identify the Xbox 360 as a media center extender when connected through a wired connection?
7:23
JacquiBT:
Hi Josh. Sam is replying to your question
7:23
[Comment From Winston Winston : ]
How much power does the home hub 4 use?
7:24
JacquiBT:
Hi Winston. Dave will respond to your question
7:24
Sam:
Hi Josh, we are aware of this issue. This is a problem with the Xbox rather than the HH4 but something we are reviewing together.
7:24
Emma:
Hi the bennyboy, the main advantages of the hub 4 are the faster processor (3 x faster) and 5 GHz wifi. There is no interference with 5GHz so you get better performance and as the range isn't as wide you dont have to share the bandwidth with neighbours etc. the hub still has 2.4 GHz so you still have the range you have withhub 3 too!
7:24
Dave:
Hi Winston, I am afraid there's no simple answer as it really depends on what features are in use. But the Hub 4 meets the latest Broadband Equipment Energy Code of Conduct targets for energy consumption.
7:25
[Comment From Mel Mel : ]
Why did you ignore your existing customers loyalty by charging them for a new hub, don't they pay enough already in their monthly fees?
7:25
JacquiBT:
Hi Mel, Dave will reply to your question
7:25
[Comment From Winston Winston : ]
How long did it take you to design and develop the home hub 4?
7:26
JacquiBT:
Hi Winston, Emma will reply to your question
7:27
[Comment From George George : ]
Will we get manual power save back?
7:27
JacquiBT:
Hi Gerorge. Sam will answer your question
7:28
[Comment From Jade Jade : ]
Does the home hub 4 support ip6 through a future upgrade?
7:28
Emma:
Hi Winston, It was about 2 years when we first started the project with the first ideas and concepts
7:29
JacquiBT:
Hi Jade. Emma will reply to your question.
7:29
Emma:
Hi Jade, thats something we are working on so yes something for the future
7:30
Sam:
Hi George. With regards to the manual power save feature, we have looked to make this automatic for all of our customers. However, you are able to change the brightness of the lights as an additional step.
7:30
Dave:
Hi Mel - we've made a lot of changes for our existing customers since the launch of the Hub 3 a couple of years ago. Our customer offer for the Hub 4 only £35 - a really big discount compared to the full price of £109! We've also created a range of recontracting deals that contain a Hub 4 for only the cost of delivery. If you're out of contract or in the last 3 months, you could take advantage of those offers as well. We really want all of our customers to be able to take advantage of these options!
7:31
Sean Donnelly:
Did you know the Hub 4 has a faster processor? Inside the BT Home Hub 4 router is our latest Broadband processor – the brains of your Hub. It allows you to pass information between connected devices quicker than ever. So if you are transferring files from one computer to another or watching a film streamed from another device, the BT Home Hub 4 won't slow you down.
7:31
[Comment From thebennyboy thebennyboy : ]
Our house has very thick stone walls and the wireless is weak in certain rooms. We have a few devices in our house that support 5Ghz Wi-Fi. Does the HH4 also work ok with home plugs that use your power cables to provide network connectivity?
7:32
JacquiBT:
Hi thebennyboy. Sam will respond to your question
7:32
[Comment From Calvin Calvin : ]
What future developments are in the works for home hub 4?
7:33

DS wrote:
Not many of my Q's are showing either. Could be busy I guess......
yeah I can tell, I know your quesitons are pretty good but if you notice that JacquiBT is deliberately choosing the questions she wants to go through. The whole chat is based around the fact that they have added 5ghz. I am appauled as I was hoping to at least ask one question.

Good evening every one! recently, i noticed that my macbook pro make a weird sound when i open the screen, it's like there is something keeping the screen from moving correctly.the little noise comes exactly from the left side of the axis.please advice me

Good evening ! recently, i noticed that my macbook pro make a weird sound when i open the screen, it's like there is something keeping the screen from moving correctly.the little noise comes exactly from the left side of the axis.please advice me what to do
(i live in morocco and i need to know where i should take ma macbook to get it fixed and if the warranty take this problem in charge)
thank you in advance
macbook pro mid2012 i7 (here is my e-mail adress : [email protected])

You should take it to an Apple store or an AASP (Authorized Apple Service Provider) Carefully inspect the hinge joint and make sure there is no debris that you can see, you can try carefully sliding some sticky tape thru the joint to clear any loose stuff out. But this sounds like there might be more going on here, and the hinge is something that you do not want to fool with.

TS4209 Wi-Fi 1.0 patch will not install on a 10.7.4 Mac OSX even though the Wi-Fi loss bug is still there

Hello all,
The Wi-Fi 1.0 patch will not install on a 10.7.4 Mac OSX even though the Wi-Fi loss bug is still there, every now and then (the iMac does not detect any wi-fi network).
Are there any other solutions regarding this issue ?
kind regards

I figured out the problem.
This is going to sound a little crazy, but I've spent a lot of time on this one.
There's some kind of incompatibility with Lion and Seagate ST31000340AS drives. I was trying to install Lion on these drives and it would consistently fail. I've also tried to use these drives in a RAID volume. No go. I tried three different drives of this model. All of them failed.
I tried to install Lion on a Seagate ST31000528AS and it worked first time and sings beautifully.

The little google search bar thats usually on the right side of my window is now gone after updating. how do i get it back?

i just updated my software and when i re-opened safari, the little google search bar thats usually on the right hand side of the window is now gone. how do i get it back?

Sorry. That is Safari 6's "new look".
Now they are copying Chrome and other browsers that combine them so that they don't take up so much space on your iPhone oops, I meant your screen.
Tabs are as big as a house as well, but that just seems to be a bug.

How do I get the little web browser hand to appear over my b

Hopefully this is an easy answer....
I have just uploaded my new website and noticed that when you
place the cursor over my image buttons that have "onClick - Open
Browser" behavior tags on them, the little web browser hand doesn't
show up. You know, the one that tells you something is a link? I'm
afraid people won't know that the images are buttons unless the
hand shows up. Any idea on how to make the hand appear? Any advice
would be great. Please keep in mind that I'm only a intermediate
level web designer. Here's my website:
http://vintagebycrystal.com/Pages/Holidays/Fourth%20of%20July/Main.html
Thanks!
-Crystal

Oh, heck. Sorry about that.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"E Michael Brandt" <[email protected]> wrote
in message
news:[email protected]...
> Jackeltree wrote:
>> Hmmm...I've downloaded the Divahtml web tools. But I
have no idea what
>> to do next. The help is not helpful and their
website is confusing...
>
> Jackeltree - I would love to hear from you off-group to
see how I can
> improve my site so it is clearer to you.
>
> I also need to point out that divaFreeTools will not
actually help the
> problem you have! Murray was referring to the Tool that
converts "#"
> links to the image url for you, but that is only if
there IS a link to
> start with. Since you applied the DW Open Browser Window
behavior to the
> IMAGE instead of to an <A> tag around the image,
there is NO link, hence
> the Tool can not help you.
>
> To get the hand cursor, you must move your onclick event
to an <a> tag. In
> DW versions EXCEPT CS3, you can simply select each image
in Design View,
> then click on the OpenBrWindow behavior in the Behavior
window, and then
> in the dropdown there, change the event from "onclick"
to "onclick <A>" or
> "(onclick)" depending on which DW you have.
>
> DWCS3 has a bug, so this will not work. You'll have to
remove the
> behavior by clicking the minus (-) icon in the behavior
window, then add a
> link to the image (the link itself can be "#" at this
point) using the
> Property Inspector, then select the <a> tag (on
the Tag Selector bar) that
> has been added for you and in the Behaviors Window add
the OpenBrWindow
> behavior to it.
>
> Then you can run my divaFreeTools script to convert the
link from "#" to
> the url to the fullsize image, which is a better link to
use.
>
> (<plug> An alternative is not to use the DW Open
Browser Window, which had
> to be added to each image one at a time, but instead,
after removing those
> behaviors from your images, create a link - using the
Property Inspector -
> to the fullsize image itself (rather than a link to "#"
or to
> "javascript:;". And then add my divaPOPgold (which does
cost a few $) to
> your page once. It will handle all the popup windows
automatically for
> you. </plug>)
>
> And again, please do contact me so I can improve the
help for
> divaFreeTools on my site. Contact me at michael at the
divahtml.com
> address.
>
> --
>
>
> E. Michael Brandt
>
> www.divahtml.com
>
www.divahtml.com/products/scripts_dreamweaver_extensions.php
> Standards-compliant scripts and Dreamweaver Extensions
>
> www.valleywebdesigns.com/vwd_Vdw.asp
> JustSo PictureWindow
> JustSo PhotoAlbum, et alia
>
> --

What is the little square?

I have a new installation of LV on a Dell Precision 370 Workstation configured as follows: 2.8 Ghz p4, 1 g ram, 2 SATA HD, PCI express NVidia dual head video card, dual LCD displays, and a PCI-6071E DAS card. Whenever LV is running, a little square, about 2/3s the size of the minimize button floats on the number 1 display. It can not be moved, does not respond to double clicks, however, it can be grabbed and an outline dragged. The outline vanishes when released. It does not seem to interfere with any applications, including LV. The center of the square momentarily changes to a blueish shade of color when DAQ Assistant property box is clicked OK, whether modified or not. The only time it disappears is with another application running on top of it or LV is shut down.
I was having a problem with the DAQ Assistant locking the system; installing the 7.1.1 Update seems to have cured the locking problem, but not the little square.
Has anybody seen this? I can email an image of the little creature, should anybody need to see it.
Thanks for looking into this,
Alan Garwood
Wyle Laboratories

Look to me like a front panel with size 0,0.
Could you poll VI-server and ask for open VI's and their size? I have no idea how these pop-up but maybe the getting started window is hijacked?
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

I can't get rid of the little number 1 on the app store icon.

The app store icon has the little number 1 on it referring to an iMovie update which unfortunately I can't download because I don't have the latest OS. Why doesn't the little number disappear after I try to update and get told I don't have the right OS? Is there some other way to get rid of it, or will I live with it for the rest of the life of my MacBook Pro?

Sometimes hiding the app helps. Go to the Mac App Store, sign into your account and check the Purchased pane. Click the X next to the Button for the app in question and the app will be hidden in your account purchases history. The update flag may not disappear immediately, but it will usually eventually.

TS3276 Apple Mail cannot find replies or forwarded emails -- the little arrows on the left of the list of emails: "Mail was unable to find your reply to the message '[subject of message]'. You may have deleted the message." I did not delete the message.

Apple Mail cannot find replies or forwarded emails -- the little arrows on the left of the list of emails: "Mail was unable to find your reply to the message '[subject of message]'. You may have deleted the message." I did not delete the message. Bug in the program, or am I missing something?

Of course they're in my Sent folder. Then why can't Apple Mail find them?

Bugs in a Powerbook? (the little live creature bugs!!)

Similar Messages

Maybe you are looking for