Bugs in the REGULAR EXPRESSIONS ORACLE10g

Hi....
In the next URL http://otn.oracle.com/oramag/webcolumns/2003/techarticles/rischert_regexp_pt1.html
Have a next title Writing More Complex Patterns , and the code is :
SELECT REGEXP_INSTR('Joe Smith, 10045 Berry Lane, San Joseph, CA 91234-1234',
' [[:digit:]]{5}(-[[:digit:]]{4})?$')
AS starts_at
FROM dual
I see this code in the Table 7 in the URL
http://otn.oracle.com/oramag/webcolumns/2003/techarticles/rischert_regexp_pt2.html#t7
But , the explanation of the code have a error in the pocket number 11 ..
Say :
[:digit] POSIX [:digit] class
[ Start of character list[/b]
] End of character list
{4} Repeat exactly four ocurrences of the character list
it would be to say :
[:digit] POSIX [:digit] class
] End of character list
{4} Repeat exactly four ocurrences of the character list
it has more than enough the line 11
Regards
Hector Gabriel Ulloa Ligarius
PD : Sorry my english

Thanks for pointing this out...the error has been corrected.

Similar Messages

Re: [iPlanet-JATO] Re: Use Of models in utility classes - Pease don't forget about the regular expression potential

Namburi,
When you said you used the Reg Exp tool, did you use it only as
preconfigured by the iMT migrate application wizard?
Because the default configuration of the regular expression tool will only
target the files in your ND project directories. If you wish to target
classes outside of the normal directory scope, you have to either modify the
"Source Directory" property OR create another instance of the regular
expression tool. See the "Tool" menu in the iMT to create additional tool
instances which can each be configured to target different sets of files
using different sets of rules.
Usually, I utilize 3 different sets of rules files on a given migration:
spider2jato.xml
these are the generic conversion rules (but includes the optimized rules for
ViewBean and Model based code, i.e. these rules do not utilize the
RequestManager since it is not needed for code running inside the ViewBean
or Model classes)
I run these rules against all files.
See the file download section of this forum for periodic updates to these
rules.
nonProjectFileRules.xml
these include rules that add the necessary
RequestManager.getRequestContext(). etc prefixes to many of the common
calls.
I run these rules against user module and any other classes that do not are
not ModuleServlet, ContainerView, or Model classes.
appXRules.xml
these rules include application specific changes that I discover while
working on the project. A common thing here is changing import statements
(since the migration tool moves ND project code into different jato
packaging structure, you sometime need to adjust imports in non-project
classes that previously imported ND project specific packages)
So you see, you are not limited to one set of rules at all. Just be careful
to keep track of your backups (the regexp tool provides several options in
its Expert Properties related to back up strategies).
----- Original Message -----
From: <vnamboori@y...>
Sent: Wednesday, August 08, 2001 6:08 AM
Subject: [iPlanet-JATO] Re: Use Of models in utility classes - Pease don't
forget about the regular expression potential
Thanks Matt, Mike, Todd
This is a great input for our migration. Though we used the existing
Regular Expression Mapping tool, we did not change this to meet our
own needs as mentioned by Mike.
We would certainly incorporate this to ease our migration.
Namburi
--- In iPlanet-JATO@y..., "Todd Fast" <toddwork@c...> wrote:
All--
Great response. By the way, the Regular Expression Tool uses thePerl5 RE
syntax as implemented by Apache OROMatcher. If you're doing lotsof these
sorts of migration changes manually, you should definitely buy theO'Reilly
book "Mastering Regular Expressions" and generate some rules toautomate the
conversion. Although they are definitely confusing at first,regular
expressions are fairly easy to understand with some documentation,and are
superbly effective at tackling this kind of migration task.
Todd
----- Original Message -----
From: "Mike Frisino" <Michael.Frisino@S...>
Sent: Tuesday, August 07, 2001 5:20 PM
Subject: Re: [iPlanet-JATO] Use Of models in utility classes -Pease don't
forget about the regular expression potential
Also, (and Matt's document may mention this)
Please bear in mind that this statement is not totally correct:
Since the migration tool does not do much of conversion for
these
utilities we have to do manually.Remember, the iMT is a SUITE of tools. There is the extractiontool, and
the translation tool, and the regular expression tool, and severalother
smaller tools (like the jar and compilation tools). It is correctto state
that the extraction and translation tools only significantlyconvert the
primary ND project objects (the pages, the data objects, and theproject
classes). The extraction and translation tools do minimumtranslation of the
User Module objects (i.e. they repackage the user module classes inthe new
jato module packages). It is correct that for all other utilityclasses
which are not formally part of the ND project, the extraction and
translation tools do not perform any migration.
However, the regular expression tool can "migrate" any arbitrary
file
(utility classes etc) to the degree that the regular expressionrules
correlate to the code present in the arbitrary file. So first andforemost,
if you have alot of spider code in your non-project classes youshould
consider using the regular expression tool and if warranted adding
additional rules to reduce the amount of manual adjustments thatneed to be
made. I can stress this enough. We can even help you write theregular
expression rules if you simply identify the code pattern you wish to
convert. Just because there is not already a regular expressionrule to
match your need does not mean it can't be written. We have notnearly
exhausted the possibilities.
For example if you say, we need to convert
CSpider.getDataObject("X");
To
RequestManager.getRequestContext().getModelManager().getModel(XModel.class);
Maybe we or somebody else in the list can help write that regularexpression if it has not already been written. For instance in thelast
updated spider2jato.xml file there is already aCSpider.getCommonPage("X")
rule:

<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpider[.\s]*getPage[\s]*\(\"([^"]*)\"]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpider[.\s]*getPage[\s]*\(\"([^"]*)\"]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[getViewBean($1ViewBean.class]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
Following this example a getDataObject to getModel would look
like this:
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpider[.\s]*getDataObject[\s]*\(\"([^"]*)\"]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpider[.\s]*getDataObject[\s]*\(\"([^"]*)\"]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[getModel($1Model.class]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
In fact, one migration developer already wrote that rule andsubmitted it
for inclusion in the basic set. I will post another upgrade to thebasic
regular expression rule set, look for a "file uploaded" posting.Also,
please consider contributing any additional generic rules that youhave
written for inclusion in the basic set.
Please not, that in some cases (Utility classes in particular)
the rule
application may be more effective as TWO sequention rules ratherthan one
monolithic rule. Again using the example above, it will convert
CSpider.getDataObject("Foo");
To
getModel(FooModel.class);
Now that is the most effective conversion for that code if that
code is in
a page or data object class file. But if that code is in a Utilityclass you
really want:
>
RequestManager.getRequestContext().getModelManager().getModel(FooModel.class
So to go from
getModel(FooModel.class);
To
RequestManager.getRequestContext().getModelManager().getModel(FooModel.class
You would apply a second rule AND you would ONLY run this rule
against
your utility classes so that you would not otherwise affect yourViewBean
and Model classes which are completely fine with the simplegetModel call.
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[getModel$]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[getModel\(]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[RequestManager.getRequestContext().getModelManager().getModel(]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
A similer rule can be applied to getSession and other CSpider APIcalls.
For instance here is the rule for converting getSession calls toleverage
the RequestManager.
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[getSession\($\.]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[getSession\.]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[RequestManager.getSession().]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
----- Original Message -----
From: "Matthew Stevens" <matthew.stevens@e...>
Sent: Tuesday, August 07, 2001 12:56 PM
Subject: RE: [iPlanet-JATO] Use Of models in utility classes
Namburi,
I will post a document to the group site this evening which has
the
details
on various tactics of migrating these type of utilities.
Essentially,
you
either need to convert these utilities to Models themselves or
keep the
utilities as is and simply use the
RequestManager.getRequestContext.getModelManager().getModel()
to statically access Models.
For CSpSelect.executeImmediate() I have an example of customhelper
method
as a replacement whicch uses JDBC results instead of
CSpDBResult.
matt
-----Original Message-----
From: vnamboori@y... [mailto:<a href="/group/SunONE-JATO/post?protectID=081071113213093190112061186248100208071048">vnamboori@y...</a>]
Sent: Tuesday, August 07, 2001 3:24 PM
Subject: [iPlanet-JATO] Use Of models in utility classes
Hi All,
In the present ND project we have lots of utility classes.
These
classes in diffrent directory. Not part of nd pages.
In these classes we access the dataobjects and do themanipulations.
So we access dataobjects directly like
CSpider.getDataObject("do....");
and then execute it.
Since the migration tool does not do much of conversion forthese
utilities we have to do manually.
My question is Can we access the the models in the postmigration
sameway or do we need requestContext?
We have lots of utility classes which are DataObjectintensive. Can
someone suggest a better way to migrate this kind of code.
Thanks
Namburi
[email protected]
[email protected]
[Non-text portions of this message have been removed]
[email protected]
[email protected]

Namburi,
When you said you used the Reg Exp tool, did you use it only as
preconfigured by the iMT migrate application wizard?
Because the default configuration of the regular expression tool will only
target the files in your ND project directories. If you wish to target
classes outside of the normal directory scope, you have to either modify the
"Source Directory" property OR create another instance of the regular
expression tool. See the "Tool" menu in the iMT to create additional tool
instances which can each be configured to target different sets of files
using different sets of rules.
Usually, I utilize 3 different sets of rules files on a given migration:
spider2jato.xml
these are the generic conversion rules (but includes the optimized rules for
ViewBean and Model based code, i.e. these rules do not utilize the
RequestManager since it is not needed for code running inside the ViewBean
or Model classes)
I run these rules against all files.
See the file download section of this forum for periodic updates to these
rules.
nonProjectFileRules.xml
these include rules that add the necessary
RequestManager.getRequestContext(). etc prefixes to many of the common
calls.
I run these rules against user module and any other classes that do not are
not ModuleServlet, ContainerView, or Model classes.
appXRules.xml
these rules include application specific changes that I discover while
working on the project. A common thing here is changing import statements
(since the migration tool moves ND project code into different jato
packaging structure, you sometime need to adjust imports in non-project
classes that previously imported ND project specific packages)
So you see, you are not limited to one set of rules at all. Just be careful
to keep track of your backups (the regexp tool provides several options in
its Expert Properties related to back up strategies).
----- Original Message -----
From: <vnamboori@y...>
Sent: Wednesday, August 08, 2001 6:08 AM
Subject: [iPlanet-JATO] Re: Use Of models in utility classes - Pease don't
forget about the regular expression potential
Thanks Matt, Mike, Todd
This is a great input for our migration. Though we used the existing
Regular Expression Mapping tool, we did not change this to meet our
own needs as mentioned by Mike.
We would certainly incorporate this to ease our migration.
Namburi
--- In iPlanet-JATO@y..., "Todd Fast" <toddwork@c...> wrote:
All--
Great response. By the way, the Regular Expression Tool uses thePerl5 RE
syntax as implemented by Apache OROMatcher. If you're doing lotsof these
sorts of migration changes manually, you should definitely buy theO'Reilly
book "Mastering Regular Expressions" and generate some rules toautomate the
conversion. Although they are definitely confusing at first,regular
expressions are fairly easy to understand with some documentation,and are
superbly effective at tackling this kind of migration task.
Todd
----- Original Message -----
From: "Mike Frisino" <Michael.Frisino@S...>
Sent: Tuesday, August 07, 2001 5:20 PM
Subject: Re: [iPlanet-JATO] Use Of models in utility classes -Pease don't
forget about the regular expression potential
Also, (and Matt's document may mention this)
Please bear in mind that this statement is not totally correct:
Since the migration tool does not do much of conversion for
these
utilities we have to do manually.Remember, the iMT is a SUITE of tools. There is the extractiontool, and
the translation tool, and the regular expression tool, and severalother
smaller tools (like the jar and compilation tools). It is correctto state
that the extraction and translation tools only significantlyconvert the
primary ND project objects (the pages, the data objects, and theproject
classes). The extraction and translation tools do minimumtranslation of the
User Module objects (i.e. they repackage the user module classes inthe new
jato module packages). It is correct that for all other utilityclasses
which are not formally part of the ND project, the extraction and
translation tools do not perform any migration.
However, the regular expression tool can "migrate" any arbitrary
file
(utility classes etc) to the degree that the regular expressionrules
correlate to the code present in the arbitrary file. So first andforemost,
if you have alot of spider code in your non-project classes youshould
consider using the regular expression tool and if warranted adding
additional rules to reduce the amount of manual adjustments thatneed to be
made. I can stress this enough. We can even help you write theregular
expression rules if you simply identify the code pattern you wish to
convert. Just because there is not already a regular expressionrule to
match your need does not mean it can't be written. We have notnearly
exhausted the possibilities.
For example if you say, we need to convert
CSpider.getDataObject("X");
To
RequestManager.getRequestContext().getModelManager().getModel(XModel.class);
Maybe we or somebody else in the list can help write that regularexpression if it has not already been written. For instance in thelast
updated spider2jato.xml file there is already aCSpider.getCommonPage("X")
rule:

<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpider[.\s]*getPage[\s]*\(\"([^"]*)\"]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpider[.\s]*getPage[\s]*\(\"([^"]*)\"]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[getViewBean($1ViewBean.class]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
Following this example a getDataObject to getModel would look
like this:
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpider[.\s]*getDataObject[\s]*\(\"([^"]*)\"]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpider[.\s]*getDataObject[\s]*\(\"([^"]*)\"]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[getModel($1Model.class]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
In fact, one migration developer already wrote that rule andsubmitted it
for inclusion in the basic set. I will post another upgrade to thebasic
regular expression rule set, look for a "file uploaded" posting.Also,
please consider contributing any additional generic rules that youhave
written for inclusion in the basic set.
Please not, that in some cases (Utility classes in particular)
the rule
application may be more effective as TWO sequention rules ratherthan one
monolithic rule. Again using the example above, it will convert
CSpider.getDataObject("Foo");
To
getModel(FooModel.class);
Now that is the most effective conversion for that code if that
code is in
a page or data object class file. But if that code is in a Utilityclass you
really want:
>
RequestManager.getRequestContext().getModelManager().getModel(FooModel.class
So to go from
getModel(FooModel.class);
To
RequestManager.getRequestContext().getModelManager().getModel(FooModel.class
You would apply a second rule AND you would ONLY run this rule
against
your utility classes so that you would not otherwise affect yourViewBean
and Model classes which are completely fine with the simplegetModel call.
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[getModel$]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[getModel\(]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[RequestManager.getRequestContext().getModelManager().getModel(]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
A similer rule can be applied to getSession and other CSpider APIcalls.
For instance here is the rule for converting getSession calls toleverage
the RequestManager.
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[getSession\($\.]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[getSession\.]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[RequestManager.getSession().]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
----- Original Message -----
From: "Matthew Stevens" <matthew.stevens@e...>
Sent: Tuesday, August 07, 2001 12:56 PM
Subject: RE: [iPlanet-JATO] Use Of models in utility classes
Namburi,
I will post a document to the group site this evening which has
the
details
on various tactics of migrating these type of utilities.
Essentially,
you
either need to convert these utilities to Models themselves or
keep the
utilities as is and simply use the
RequestManager.getRequestContext.getModelManager().getModel()
to statically access Models.
For CSpSelect.executeImmediate() I have an example of customhelper
method
as a replacement whicch uses JDBC results instead of
CSpDBResult.
matt
-----Original Message-----
From: vnamboori@y... [mailto:<a href="/group/SunONE-JATO/post?protectID=081071113213093190112061186248100208071048">vnamboori@y...</a>]
Sent: Tuesday, August 07, 2001 3:24 PM
Subject: [iPlanet-JATO] Use Of models in utility classes
Hi All,
In the present ND project we have lots of utility classes.
These
classes in diffrent directory. Not part of nd pages.
In these classes we access the dataobjects and do themanipulations.
So we access dataobjects directly like
CSpider.getDataObject("do....");
and then execute it.
Since the migration tool does not do much of conversion forthese
utilities we have to do manually.
My question is Can we access the the models in the postmigration
sameway or do we need requestContext?
We have lots of utility classes which are DataObjectintensive. Can
someone suggest a better way to migrate this kind of code.
Thanks
Namburi
[email protected]
[email protected]
[Non-text portions of this message have been removed]
[email protected]
[email protected]

Wat should be the regular expression for string MT940_UB_*.txt to be used in SFTP sender channel in PI 7.31 ??

Hi All,
What should be the regular expression for string MT940_UB_*.txt and MT940_MB_*.txt to be used as filename inSFTP sender channel in PI 7.31 ??
If any one has any idea on this please let me know.
Thanks
Neha

Hi All,
None of the file names suggested is working.
I have tried using - MT940_MB_*\.txt , MT940_MB_*.*txt , MT940*.txt
None of them is able to pick this filename - MT940_MB_20142204060823_1.txt
Currently I am using generic regular expression which picks all .txt files. - ([^\s]+(\.(txt))$)
Let me know ur suggestion on this.
Thanks
Neha Verma

The Regular Expressions and GUID.

Hello gurus, I hope you can help me!
I am needing to select GUIDS from a table and for this, I need the Regular Expression. My
Perl is not good and not good Regular Expression. My database is Oralce 11.2.0.2.0 and
the Operating System of the Machine is Linux (Oracle Version 6). If you require the further information,
I will watch closely. Thank you. Jehangir.

>
Hi Jehangir and welcome to the forums.
I am needing to select GUIDS from a table and for this,Well, the first thing you should do is read the forum FAQ and also the post by BluShadow
at the top of the posts on the forum home page. You should have provided code (DDL
and DML) showing your particular problem, but since this is your first time, I'll be gentle ;)
We have done this - sometimes clients have GUIDs as PKs and we need to send data to
their systems, but it isn't as simple as it may first appear.
GUIDs can come in three formats.
The Oracle one - SELECT Sys_GUID() from DUAL which is just a string of 32 Hexadecimal characters.
Then the string with hyphens and then the string with hypens and {} at beginning and end (see
sample data).
with datax as
SELECT '79A864CCD8E44CD8B0A2765DF9EF337B' as guid FROM DUAL UNION ALL
SELECT '79A864CFD8E44CD7B0A2765DF9EF337B' FROM DUAL UNION ALL
SELECT '8gdfsgsgfdg' FROM DUAL UNION ALL -- dummy for testing
SELECT '21EC2020-3AEA-1069-A2DD-08002B30309D' FROM DUAL UNION ALL
SELECT '21EC5550-3AEA-1069-A2FF-08002B30309D' FROM DUAL UNION All
SELECT '{21CC2020-3AFA-1A69-A2DD-08002B30309D}' FROM DUAL
-- first one is the Oracle format
select * from datax where regexp_like(guid, '[0-9a-fA-F]{32}'); -- Oracle select sys_guid();
-- second one is with hyphens
select * from datax where regexp_like(guid, '[0-9a-fA-F]{8}\-[0-9a-fA-F]{4}\-[0-9a-fA-F]{4}\-[0-9a-fA-F]{4}\-[0-9a-fA-F]{12}');
-- third one is with hyphens and curly brackets.
select * from datax where regexp_like(guid, '^\{[0-9a-fA-F]{8}\-[0-9a-fA-F]{4}\-[0-9a-fA-F]{4}\-[0-9a-fA-F]{4}\-[0-9a-fA-F]{12}\}$');
-- This converts both of the last two formats back into Oracle format, which is what
-- we use. Notice, that I haven't used regualar expressions to do this. Regexes are
-- computationally expensive, and you should use Oracle's string furnctions if possible
SELECT REPLACE(REPLACE(REPLACE(GUID, '{', ''), '}', ''), '-', '') FROM Datax;HTH,
Paul...
Jehangir.

The Regular Expression anchors, "^" and "$" do not work for me in Dreamweaver

I am using the Find and Replace feature of Dreamweaver 8 and especially the "Use Regular Expressions" setting. But I have never been able to make the Regular Expression anchors "^" and "$" work at all. This are supposed to fix a match at the beginning or ending of a line or input. But if I search even something as elementary as "^ ", or " $", it can't seem to find them.
Am I missing something? Can somebody give me an example of this working?
Any and all tips or clues would be appreciated.

Welcome to Apple Discussions and Mac Computing
Definitely an E-bay issue. The coding on the page is not Safari-friendly. Firefox, as you discovered, in this instance is the better choice.

ALC-FUT-001-007: Syntax error in the regular expression *. from File Utilities - Find in ES2

Has anyone encountered the above error when trying to use the Foundation - File Utilities service Find?
This is occuring in ES2, and I have tried using an asterisk, as well as the exact file name I know exists.
I have tried literals in the Process Properties, as well as passing it in via string variables.
Any help is appreciated.
Thanks
Mark

Thanks for your response.
Here is what we have learned:
We should not put the regular expression value in single quotes - eliminates the error.
The problem is, the Find operation always returns an empty list no matter what criteria we enter - even C:\ with criteria = *.*
ES 2 is running on a Windows 2003 machine.
Thanks Again
Mark

How to get the meaning of the regular expression?

Hello All,
I want to know how to get the meaning of the regular expression?
The requirement is i need to get the regular expression for some of the attributes and if the value is not matching with that regular expression then i need to give the popup saying the limitation of the attribute. but i need to give the pop up with the user understanding format.
Like "please give a to z or 1 to 9" like that.
So is there any way Java will help me to get the meaning of the regular expression?
Thank You!
Arun S

I'm not aware of any such tool or library.
Also, it would be a terrible "explanation", because regular expressions (similar to other programming languages) have their own "style" of defining what to enter and that usually doesn't translate well into natural language.
For example the regex "[a-z][a-z0-9]*\s+[a-z0-9]+" could be translated as "a to z, followed by zero or more characters from a to z or 0 to 9 followed by any amount of whitespace followed by one or more characters from a to z or 0 to 9".
Or you could simply say "Please enter two alphanumeric words, the first one must not start with a number".
My suggestion: store/configure the human-readable description together with the regex. Don't try to automate it.

How to write the regular expression for Square brackets?

Hi,
I want regular expression for the [] Square brackets.
I have tried to insert in the below code but the expression not validate the [] square brackets.
If anyone knows please help me how to write the regular expression for [] Square brackets.
private static final Pattern DESC_PATTERN = Pattern.compile("({1}[a-zA-Z])" +"([a-zA-Z0-9\\s.,_():}{/&#-]+)$");Thanks
Raghav

Since square brackets are meta characters in regex they need to be escaped when they need to be used as regular characters so prefix them with \\ (the escape character).

Regarding The regular expression

Hi all:
there is an error in the following statement , the error messge while activating the system says
The regular expression '|' is invalid character at position 1., could u pls tell me how exactly correct the following statements.
REPLACE ALL OCCURRENCES of REGEX '|' in s_name1 with ''.
REPLACE ALL OCCURRENCES of REGEX '?' in s_name1 with ''.
REPLACE ALL OCCURRENCES of REGEX '*' in s_name1 with ''.
Thank u vrey much for any reply

hi ,
I agree with thomas , u dont have to specify REGEX ...
For Ex :
data : g_str2(100) type c value '12:30:40'.
REPLACE ALL OCCURRENCES OF ':' IN G_STR2 WITH SPACE.
Result : g_str2 = 12 30 40.
All occurances of g_str2 will be replaced by space.
Cheers !
Soumya Ranjan

Getting the regular expression from the given text

Hi
I need to develope an application which can convert the given text into the regular expression. I need that when i enter any text in textarea that should be translated into regular expression in another panel. but i could not find the method or technique which can do so. plz help me to resolve this issue.
Thanks Imran khan.

well, there are an infinite number of regular expressions for an arbitrary piece of text, so you will have to qualify in your mind what the purpose of the regular expression is.
For instance, it is trivial to create a regex for a string just by copying the input text, and inserting \ before any special characters. But this pattern would probably be quite silly.

Dilimit the regular expression

How could I delimit the regular expression with the pound sign (#) and then use a single quote within the expression.
Can someone give some explamples.
As the regular expressions are enclosed within quotes, and I have a single quote in string also how would i be able to specify it by dilimiting the regular expression with a # sign.
Thanks
Edited by: LostWorld on Sep 15, 2010 5:40 AM

Hi,
Not sure I understand the issue you're facing, but I think using q quoting might help:
SQL> with t as (
2 select 'abcd ''1234''' str from dual)
3 -- end of sample data
4 select str, regexp_substr(str, q'#'1234'#') str from t;
STR STR
abcd '1234' '1234'The # symbol now encloses the string in the example above.
You can refer to the docs for more infor, in the link below:
http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/sql_elements003.htm

What is the regular expression for the end of a story?

Forgive me if this is wrong forum for asking this, but I'm trying to use the Find command using GREP and I need to know the regular expression for the end of a story. (Or, the last character of a story.) Thanks in advance.

I'd try search for .\z (that's a dot in front) which ought to find the very last character in the story, and replace with $0 and your additional text.
You know you can use a keyboard shortcut to move your cursor to the end of any story, right? Ctrl + End on Windows, Cmd + End, I think, on Mac. Unless you want to do this to every single story in the document, I would think you might be just as well off to put your text on the clipboard, put the cursor in the story and hit the key combo followed by Ctrl/Cmd + V to paste.

The regular expression.

Hello all, I have need to learn the regular expression for teh Oracle database. Can
anyones tell to me where I find the informations - good sites that give the secrets ;)
I have already look but would like some advices. Nóra

Nóra wrote:
Hello all, I have need to learn the regular expression for teh Oracle database. Can
anyones tell to me where I find the informations - good sites that give the secrets ;)
I have already look but would like some advices. NóraHi Nóra,
I have been looking at this recently myself and I have a few
sites bookmarked. Enjoy the intricacies of regexen - with any
luck, you won't even have to learn any PL/SQL ;)
Good introdution
http://www.zytrax.com/tech/web/regex.htm
Simple summary of Oracle's regular expressions
http://www.regular-expressions.info/oracle.html
Not forgetting the Wiki (contains table with vi
equivalents - for those of us who use a real editor ;)
http://en.wikipedia.org/wiki/Regular_expression
This site should be one of your main ports of call for any Oracle issues.
Good forums also - better software than Oracle themselves.
http://www.orafaq.com/node/2404
Morgan's Library - used to be psoug.org - don't know what happened - anyone?
Daniel posts here from time to time
http://www.morganslibrary.org/reference/regexp.html
And,not forgetting the Oracle docco.
http://docs.oracle.com/cd/B19306_01/appdev.102/b14251/adfns_regexp.htm
http://docs.oracle.com/cd/B12037_01/appdev.101/b10795/adfns_re.htm
Also look on OTN for a .pdf for introduction.HTH,
Paul...

[CC] Search&Replace: Bug only with Regular Expressions

Can you confirm the following behaviour/bug?
Steps to reproduce:
1 Create a new document in DW CC
2 Enter that text in the source code view:
<p>€</p>
3 Open Search&Replace
Field Search in: Current document
Field Search: Text
Field Search (3rd Field): €
Start Search
Result: As expected the "€" is found.
4 [x] Regular Expressions
Start Search
Result: "€" isn't found
Can you reproduce that?
Do you regard that as a bug like me?
If not, why please?
Do you think it is technically impossible for the developers to solve the task?
Do you think the developers forgot to gray out "text" in the choice box and allow regular expressions only in source code?
Thanks.

Nice that you like the nick
Sure, I know that I can file a feature wish.
But my main interest in this forum is to know, what other users think about certain features, why they think so, which they miss, which they regard as a bug, ...
When I remember it right, you told me some time ago, that you don't use RegEx.
Than I understand, that everything around that feature is not important for you.
What I like to understand is, why you think the behaviour is logically.
For me it is the opposite.
You get a result with "Scope: Text", "[ ]RegEx".
And you get no result with "Scope: Text", "[x]RegEx".
Incredible strange.
I would appreciate, if you could explain more detailed your view.

What's wrong with the regular expression?

Hi all,
For the life of me I can not figure out what is wrong with this regular expression
.*\bA specific phrase\.\b.*
This is just an example the actual phrase can be an specific phrase. My problem comes when the specific phrase ends in a period. I've escaped the period but it still gives me an error. The only time I don't get an error is when I take off the end boundry character which will not suffice as a solution. I need to be able to capture all the text before and after said phrase. If the phrase doesn't have a period it would look like this...
.*\bA specific phrase\b.*
which works fine. So what is it about the \.\b combination that is not matching?
I've been banging my head on this for a while and I'm getting nowhere.
The application highlights text that comes from a server. The user builds custom highlights that have some options. Highlight entire line, match partial word, and ignore case. The code that builds my pattern is here
String strHighlight = _strHighlight;
        strHighlight = strHighlight.replaceAll("\\*", "\\\\*");
        strHighlight = strHighlight.replaceAll("\\.", "\\\\.");
        String strPattern = strHighlight;
        if(_bEntireParagraph)
            if(_bPartialWord)
                strPattern = ".*" + strHighlight + ".*";
            else
                strPattern = ".*\\b" + strHighlight + "\\b.*";
        else
            if(_bPartialWord)
                strPattern = strHighlight;
            else
                strPattern = "\\b" + strHighlight + "\\b";
        if(_bIgnoreCase)
            _patHighlight = Pattern.compile(strPattern, Pattern.CASE_INSENSITIVE);
        else
            _patHighlight = Pattern.compile(strPattern);So for example I matching the phrase: The dog ate the cat. And that phrase came over in the following text: Look there's a dog. The dog ate the cat. "Oh my!"
And my user has the entire line and ignore case options selected then my regex woud look like this: .*\bThe dog ate the cat\b.*
That should get highlighted, but for some reason it doesn't. Correct me if I'm wrong but doesn't the regex read as follows:
any characters
word boundry
The dog ate the cat[period]
word boundry
any characters until newline.
Any help will be much appreciated

A word boundary (in the context of regexes) is a position that is either followed by a word character and not preceded by one (start of word) or preceded by a word character and not followed by one (end of word). A word character is defined as a letter, a digit, or an underscore. Since a period is not a word character, the only way the position following it could be a word boundary is if the next character is a letter, digit or underscore. But a sentence-ending period is always followed by whitespace, if anything, so it makes no sense to look for a word boundary there. I think, instead of \b, you should use negative lookarounds, like so: strPattern = ".*(?<!\\w)" + strHighlight + "(?!\\w).*";

Bugs in the REGULAR EXPRESSIONS ORACLE10g

Similar Messages

Maybe you are looking for