Bugs installing a CS4 on a MBPro ?

I have problems installing a CS4 Design Standard on a MacBook Pro 15'.
OSX 10.6.2
Processor 2.8 Ghz
Memory 8GB
Have installed previous versions on previous macs without any problems.
Any bugs known at this time ?
The installation program goes through all steps, confirming that the CS has been correctly installed ... and only Acrobat is installed. Nothing else.
Would be grateful for any help.
Thanks

If I recall correctly, the limitations of installing Photoshop related to USB flash drives (ie external).
The SSD in the laptop will be an internal drive like any other and should not present a problem.

Similar Messages

  • UPGRADE RAM TO INSTALL ADOBE CS4?

    I need to install Adobe CS4 on my Power Mac from 2003. The memory card inside is only 512MB. Can I install a 2GB memory card, or will this computer not support 2GB?
    Would an external USB RAM drive be helpful/possible?
    Want to be up and running ASAP, but keep hitting road blocks. Any advice would be appreciated. Thanks.

    Be sure to research CS4 carefully. I'm seeing info on the web saying the min processor for CS4 is a G5, not a G4. You may need to find a copy of CS3. I'm still running CS2 on my G4 MDD and haven't encountered any limitations on my modest needs.
    If you end up with CD3, note this: the installer for Adobe CS3 had a known minor bug where the installer would balk if seeing more than 1.5G RAM (3 x 512MB modules in a 2003 G4). This did not affect the program once the software was installed, so the workabout was to remove one module to have 1.5 G RAM during installation and then return the module you pulled to its original slot once the instll was complete.

  • I need to install photoshop cs4 extended from a disk to a new computer because my old computer had a hard drive crash. There is no serial number on the back of the case.  How can I obtain a usable serial number?

    I have to install Photoshop CS4 extended on a new computer from a disk because my old computer had a hard drive crash.  There is no serial number on the back of the case.  How can I obtain a usable serial number?

    Find your serial number quickly
    You can activate software without following up and registering it... at least that was the case in the past.  The serial number is normally located on the disc case or a box inside the main box.  If you did not purchase the disc from Adobe then it is possible you would have dealt with a redemption code, in which case it would have been up to you to keep a record of the serial number, especially if you did not follow up and register the software.

  • I am trying to install my CS4 Suite onto new PC with Windows 8.  It installed Photoshop but nothing else.  It is asking me to "Install with 'setup.exe'"  Which i dont think is on there.  Is there a way around this?  Thanks in advance.

    I am trying to install my CS4 Suite onto new PC with Windows 8.  It installed Photoshop but nothing else.  It is asking me to "Install with 'setup.exe'"  Which i dont think is on there.  Is there a way around this?  Thanks in advance.

    Run the cleaner tool and reinstall with sufficient user privileges and security stuff turned off. Your install went wrong because you didn't consider this.
    Mylenium

  • Error Installing Dreamweaver CS4 on Windows 7: Installer Database is Corrupt

    Error Message: The Installer Database is Corrupt. Please contact Adobe Customer Service.
    I bought a new laptop and would like to install Dreamweaver CS4 on it. It is already running fine on my desktop, being installed back in 1/2011. Both PCs are Windows 7 but the new laptop is Windows 7 Professional.  I have downloaded the two install files ADBEDRWVCS4_LS1.7z and ADBEDRWVCS4_LS1.exe multiple ways and to multiple locatons on the laptop. I've run the .exe file multiple ways and extracted to several locations besides the default (c:\users\userid\Desktop\Adobe CS4). After the extract completes and it tries to run setup I get the same message "The Installer Database is corrupt. Please Contact Adobe Customer Service" (which I did and they just gave me another download link I had already tried).
    I even copied the folder with the extracted files done on my desktop (where the install had succeeded). And still got the same message when I ran setup.exe on the laptop. I tried running it with a "run as administrator" command prompt, double-clicking in Windows Explorer, start > run and the same thing happens. At least it doesn't appear that it has actually installed anything yet.
    I did notice that my new PC has a program called "7-zip 9.20" installed which I do not remember installing and its install date is prior to my purchase of the PC so I'm guessing it came with it (HP Pavilion 15t running Windows 7 Professional 64-bit). The Windows 7 Desktop does not have this program installed. It is available from C|net where it has a good rating. Perhaps setup.exe does further extracting and the 7-zip program is the culprit? This is a long shot.
    I searched for others with this problem and found lots of issues installing Dw CS4, but none quite like this.

    Awesome! That worked! Actually I searched three folders (Program Files, Program Files (x86) & Program Data) for caps.db and found:
    c:\Program Files\Adobe\Adobe Premier Elements\caps.db (dated 9/2/2011)
    c:\Program Files (x86)\Common Files\Adobe\Backup\caps.db
    I ignored the first one since it might be needed by the Premier Elements 10 I installed yesterday and changed the name of the other one from caps.db to barb.fix.
    I changed the install folder from c:\Program Files\Adobe to c:\Program Files (x86) just in case CS4 is a 32-bit application which I had done before when installing on my Windows7 Desktop. Now that the install has completed I see that I have caps.db files dated 5/5/2014 in
    c:\Program Files (x86)\Common Files\Adobe\caps\caps.db
    c:\Program Files (x86)\Common Files\Adobe\backup\caps.db (barb.fix is still there but is only 26kb vs 3291 kb for the new caps.db)
    Thank-you so much! Now wish me luck when I try to open it for the first time!

  • Problem installing dw cs4 on mac osx 10.5.7

    Hi,
    I am encountering a weird problem when trying to install dw cs4 on my macbook which runs osx 10.5.7. My user account has admin privilliges, yet when running the setup / installation file either from the disk or by downloading the trial - 2 dreamweaver icons appear in my dock, bounce up and down for a few seconds then disappear.
    Are there any known issues installing dw cs4 on 10.5.7?
    I have done an OS update to ensure im running the latest version.
    I tried installing DW on another laptop running 10.4.11 which worked seamlessly.
    Thanks in advance for any help you can give

    Dragging Adobe files to the Trash on a Mac is the surest way to installation nightmare. Adobe products need to be properly uninstalled using the Adobe installer. You will need to clean up your system using the CS4 Clean script from http://www.adobe.com/support/contact/cs4clean.html.

  • How to install PS CS4 64bit in a Dual Boot system

    Hi,
    I have just created a dual boot system.
    Dell XPS 600 3 gig of ram (soon to be 6 gig
    Windows XP Pro 32 bit
    Windows Vista Home Premium 64 bit
    The windows OS can not see above 2 gig (and that is a long story but believe me I have had it confirmed - even though a 32 bit system should be able to see up to 3.5 gig). That is why I created the dual boot (into Vista 64) OS.
    The Vista 64 bit OS CAN see the current 3 gig (soon to be 6 gig).
    Each has its own partition and I dual boot via a 3rd party BootIt NG
    Question:
    1. What is the proper way (if I even can do it) install PS CS4 on to the Vista 64 bit (in another partition) to take advantage of PS CS4 64?
    2. Do I have to delete the XP 32 bit version and reactivate?
    3. I do not use Bridge (or do I have to in order to get the 64 bit)? I have seen some threads here about using Bridge so I was wondering about that.
    4. I also have IL CS4, ID CS4 and plan to do the same. Is that possible?
    5. I know there is an issue with plugins so I will address that matter as it comes up. Hopefully, though the downloaded brushes will work ok in both the 32 and 64 bit envrionments.
    Thanks in advance,
    Bob

    Thanks for the responses. Perhaps more of an explanation as to what I have done is in order.
    I purchased this Dell XPS 600 XP Pro system some time ago. It was a "boomer" (powerful) system in its' day.
    I subsequently increased the Ram to 2gb. I also have a internal 160gb 10K (rpm) Raptor and and another internal WD 250bg (7500 rpm) HD. I drive 3 monitors with a Nvidia 6800 and a Nvidia Dual port 7800 Gt.
    So, all in all, the system is still (by today's standards) fairly robust.
    BUT, with PS CS4, I tried to up the Ram from my installed Windows XP Pro 2gb system to 3 gb (given that every spec in the world says a 32bit system can see a max of 3 to 3.5 gb).
    On my system. Wrong. It (the Windows XP My Computer Properties system would not see over 2 gb (even though BIOS said there was 3gb!) Additionally, BIOS said my board was capable of 64 bit processing.
    After hours with DELL tech support (what a waste), I just concluded I should make a Dual boot with Vista Home Premium 64 bit.
    I did, and Vista 64 does see the current 3gb in the system. I should add, I am going to make it an 8gb system and my memory will arrive from crucial.com tomorrow.
    So Bob, to address your comment. I started (2 years ago?) with Windows XP Pro 32 bit. I have a ton of applications (32 bitters) on the C drive now. But I want the extra addressing (AKA speed potential) capability of a 64bit system. In short, that is the reason for the Dual Boot.
    I just cannot burn the 32 bit bridge due to the number of 32 bit apps on it, but I can now utilize a 64 bit architecture for PS CS4, (and as I now am reading ID, and IL CS4 flavors)
    Hope I cleared things up.
    And as always, thanks
    Bob

  • How do i re-install my CS4, with no discs?

    How do i re-install my CS4, with no discs?
    I have InDesign CS from 2003.  At some point I upgraded to Adobe CS4, but I did that online, and never had a disc.
    I had to clear my Mac, and reinstall my Mac when it crashed.  I uninstalled my Adobe CS4, and I am now realizing I don't have a way to reinstall.
    1.  My Mac won't support the install system on my old InDesign CS disc.
    2.  I don't have discs for the CS4.
    How do I get my CS4 back?
    Joe

    Hi josephcarlsonjc
    Download CS4 Trial from below link : http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
    Follow the instructions carefully to initiate your download...

  • I have CS4 on a PC. I have bought a new MAC. How do I install my CS4 on the MAC- it seems this is a windows license.

    I have CS4 on a PC. I have bought a new MAC. How do I install my CS4 on the MAC- it seems this is a windows license.

    The license is only good for Windows and is too old to qualify for a platform swap.  The only option you might have is to install Windows emulation software on the Mac and install CS4 thru that.

  • I have Creative Suite 3 Master Collection. Am trying to install Photoshop CS4 upgrade. It will not accept any of the serial numbers from my Creative Suite 3 Master Collection. The upgrade is for Photoshop CS 4 only

      Need help installing Photoshop CS4 upgrade. I have Adobe Creative Suite 3 Master Collection installed on my computer. When trying to install Photoshop CS 4 upgrade. I am ask for serial number of Photoshop CW, CS2, & CS3 I put in the serial number from my Creative Suite 3 Master Collection. None of which are accepted. What do I need to do to accomplish upgrade?

    When you purchase a Creative Suite collection, you can't run an upgrade on an individual product within the Suite. You have to upgrade the entire collection.
    You could purchase a copy of Photoshop CS6, or a subscription to Photoshop which can be as little as $9.99 with the Photography plan to the Creative Suite.
    Adobe no longer sells upgrades to CS3 or CS4.

  • I bought Adobe Suite 4 on disc and I have a serial number but my new laptop doesn't have a CD drive. How do I install Photoshop CS4?

    I bought Adobe Suite 4 on disc and I have a serial number but my new laptop doesn't have a CD drive. How do I install Photoshop CS4?

    Download from Download CS4 products
    Install then enter your serial number.

  • Installing Photoshop CS4 from original Disk onto my new Macbook Pro.  Serial number accepted but now asks for the serial number of a previous version e.g. CS3 which I no longer keep.  How do I resolve ?

    Installing Photoshop CS4 from original Disk onto my new Macbook Pro.  Serial number accepted but now asks for the serial number of a previous version e.g. CS3 which I no longer keep.  How do I resolve ?

    Tina Hadley did you migrate/transfer your applications over to your new Macintosh?  If so this could cause problems with your serial number being recognized.  Please run the available uninstallers located in Applications/Utilities/Adobe Installers folder.  Once this is done you will also want to run the CC Cleaner Tool.  Details on the use of the CC Cleaner Tool can be found at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

  • Trouble installing Photoshop CS4 on MacBook OS X 10.7.5

    I am having trouble installing Photoshop CS4 on my MacBook OS X 10.7.5. I have downloaded the software and when I go to install it gets hung up on the 'preparing to install' screen.

    your installation logs will need to be checked: http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

  • Help with install photoshop cs4 extended in win7 64bit !

    im using windows 7 ultimate 64bit, i tried to install photoshop cs4 extended but when it's done with error. So any idea about this issue ?

    I'm not a mod but I have the Links.
    CS4 Clean Script.

  • Problem installing Adobe CS4

    Hi,
    I am trying to install Adobe CS4 however when i press on the setup, the setups starts to inspect the system to check if it meets the minimum requirements. When this is ready, I get a larger window (as if setup is going to begin) and soon after a smaller window which remains blank white.
    I wouldnt be able to close the setup, complete it or whatsoever. The only option is to force quit the setup. Any help on what can i do to install it?
    (the blank window opening could be due to the fact that i have 1GB RAM and it is recommended to have 2GB)

    Here's the requirements.
    * PowerPC® G5 or multicore Intel® processor
    * Mac OS X v10.4.11–10.5.4
    * 512MB of RAM (1GB recommended)
    * 2GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on flash-based storage devices)
    * 1,024x768 display (1,280x800 recommended) with 16-bit video card
    * Some GPU-accelerated features require graphics support for Shader Model 3.0 and OpenGL 2.0
    * DVD-ROM drive
    * QuickTime 7.2 software required for multimedia features
    Your RAM is OK. However, you need to update your OS to 10.4.11.
    Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
     Cheers, Tom

Maybe you are looking for

  • How to give planners read only access to Planning cube for ad-hoc analysis?

    Hi Everyone, I am trying to issue smartview reports to the planners. Most of the reports are coming off Essbase (reporting) application. However, we have to generate one report from planning server because of the text fields. Currently, on planning s

  • Where does system preferences store old profile pictures?

    I can still set it as my profile pictures, but i deleted it in the photobooth folder. its still got to be on there somewhere. Where is it?

  • SOAP over JMS in OSB

    Hello! I've successfully created the following: (1) A Soap over JMS Endpoint using OSB. (2) A standalone Java Client to the above endpoint (using the weblogic.wsee.tools.anttasks.ClientGenTask tool). My first question is, am I limited to using the Cl

  • Albumart working on powermac g5 not on iphone

    Hi some of the albums i sync from itunes to my iphone dont have working albumart, in itunes on the computer the cowerflow view shows the albumart but in cowerflow view on the iphone some albumart is missing. the difference that i have noticed is that

  • Property parentCategory is null in ProductCatalog

    I was configuring the SitemapGeneratorService for generate a xml sitemap and was setted a ProductIndirectTemplate as below: $class=atg.repository.seo.IndirectUrlTemplate urlTemplateFormat=/p/{item.parentCategory.displayName}/{item.parentCategory.id}/