Bugs/Issues/Fetaure-request lists?
Does Linksys/Belkin/Cisco maintain a publicly viewable list of acknowledged bugs with their routers (e.g. EA4500)?
Is there a way for a customer to submit a feature-request/recommendation?
I haven't seen a site where Linksys keeps a list of anything. One of the reasons why I keep on visiting the community forum is to know what others have experienced with their Linksys device. If you would like to submit a feature-request/recommendation, check out this link and send your feedback over to them. Or you may also consider their tech support hotline.
http://linksys.custhelp.com/app/feedback
Similar Messages
-
Access request List issue after migration
I have migrated site sharePoint 2013 from metalogix tool.
Migration is from SharePoint 2013 to SharPoint 2013
I am getting one strange error while approving "Permission request" send by the users. I have matched columns of Access Request list(Hidden) from original site to New site , columns are matching, and also I have checked every column
on migrated site, ther are opening without error, so why I am getting this error , there are no logs for this.
One thing is diffrent is that on migrated site I am not gettign any data from Permission column check below, however On original site I am gettign data for this Permission column , what can be an issus ?
Please mark answer , if you think answer is helpful or correct.Hello WillAdams92,
It seems you are experiencing permissions issues. You can repair permissions using Disk Utility, which comes with all Macs. The following article provides more information about the feature:
About Disk Utility's Repair Disk Permissions feature - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D -
BUGS and FEATURES REQUESTED. Please add to it.
I've been using the z10 for the past couple weeks and wanted to start a thread of comprehensive Bugs and Features Requested.
I've labeled Bugs by letters (A,B,C...) and Features Requested by numbers (1, 2, 3...) so that others can add sequentially.
BUGS
(Not listed in any particular order)
(A.) Contact App adds current date as birthday. When I edit my contact, the current date gets listed as the birthday in local contact.
(B.) Duplicate telephone numbers listed. Telephone numbers show up twice in my Contacts (e.g.., if I have the contact's cell saved in (000) 123-4567 format and the person has the number listed in Facebook, I get a duplicate entry of +10001234567).
(C.) Telephone numbers and emails are not actionable in Web pages. In webpages, I can't click on telephone number to call (e.g., I look up a phone number for a restaurant). I should be able to easily call or copy into the Phone App or E-mail App.
(D.) Auto capitulation for words on the word substitution list is wrong. For example, when the word substitution contains more than one word. I have "ru" change to "are you" but if the first letter is capitalized (R) then both words become capitalized words (Are You). I used to have shortcuts like "mysig" to create email signatures with legal disclaimers but I can't do that now.
(E.) Backspace delete doesn't work consistently. The Shift+Delete function seems only to work after moving the cursor. This feature is the Alt+Del action to delete words after the cursor.
(F.) All Emoticons do not list. Emoticons do not all fit on the the two screens (lists) of emoticons. I.e., two columns are missing from view and can be seen when sliding (swiping) between the lists. Also, sometimes when I select an emoticon, it doesn't correspond with the picture of the one I intended. I believe this error is related. As a separate note, there should be a way to see the underlying symbols of the emoticon. (Often times, other people don't have BlackBerrys so I'd like to know what symbols would be sent--my prior 9800 would show the characters as i scrolled through them).
(G.) BlackBerry keyboard doesn't always work in input fields. E.g., certain Web pages. (I found a work around; two finger swipe up from the bottom makes the keyboard appear)
(H.) Sent messages stay unread. This seems to be an issue when an app sends an email (e.g., share article). The email with the sent indicator (checkmark) stays bold and I have listed 1 unread email. I can't mark as read/unread but if I delete the sent email, my unread message gets cleared.
(I.) Contact already added but I get the option to add instead of view contact. For some contacts, I get the option to add to contacts in the action menu cascade when that person is already in my address book. This bug is for emails and text messages.
(J.) Cannot call from text message. When I hold a text message and select call under the action menu cascade, the OS opens up the phone app but doesn't call.
(K.) Composing messages by name. When composting messages, the input must be by first, middle and last name. It should be, instead, by string and include nickname. E.g., if the person's name is "Andrew B. Cameron" I must type the name in as such. I can't type in "Andrew Cameron" or "Andy Cameron."
Features Requested and Suggestions for Improved User Experience
(In no particular order)
1) Option to reply in different ways from the Call List. Be able to select a name in a call list and have options to call, text or email the person. The action menu allows calls to other numbers but I can't choose to text or email the contact instead. Sometimes, I missed a call and want to reply via text because I’m not able to talk. (Long hold on the Torch 9800 trackpad button brought up the action menu allowing me to call, text, view history, add to speed dial, e-mail, delete, etc.)
2) Option to reply in different ways from the Hub. Related to above, when selecting an item in the hub, have the option to contact the sender or caller with multiple different ways.
3) Only show number once in contacts application. Tap on the number to bring up the "action" cascade menu with options to call or text the number. Why is the same number listed twice (once to call and below again to text it)?
4) Timestamps for individual text messages. I can't tell exact time on individual text message if it comes in near the time of another text. All messages are in one "bubble."
5) Ability to select MMS or text for a message. Sometimes I write a text longer than 160 characters and I prefer it to be sent in one message (i.e., MMS mode) rather than being broken into one or more standard text messages. I had this ability with my 9800.
6) Send button should be moved for text messages!!! Why the heck is it right underneath the delete button?!? Or next to the period button? I often times have accidentally hit send when composing text. It's very annoying and embarrassing. (Also, what happened to the ability to hit enter for a return carriage to next line?)
7) Bigger magnifying glass. My finger is often over the area I need to place the cursor. I find it difficult and erratic to place the cursor.
8) Select all option. Add the option to select all text in action menu cascade.
9) E-mail recipients and message headers. Difficult to tell if you are one of many email recipients. Can we have a way to pull the email down to see the list of recipients rather than have to click to expand the header info? I know this request is a little picky, but that's how it was done in the previous BlackBerry OS which I preferred; it is easier and faster to pull the e-mail down and 'peek' to see which e-mail box received the message, message status, from and to fields. This change would be consistent with BB's flow/peek rather than click.
10) Browser navigation. Hold down back arrow to get a list of recently visited websites similar to a desktop browser.
11) Dark/Night mode. A night mode (maybe in the drop down menu) to change all the white and bright backgrounds to black or dark which would be helpful when reading/viewing things at night in bed/etc.
12) Number of contacts. Ability to see how many contacts I have.
13) What happened to groups or categories? I'd like to have back the ability to filter or see categories and also a way to contact everyone in a category. E.g., family or friends or coworkers, etc.
14) Shutter sound mute. I was at a wedding and wanted to take pictures during the ceremony but the shutter would was too loud.
15) East Asian Language Input. I bought my parents two Samsung Galaxy S3 phones over the weekend because they need Korean input (and the Kakao talk app). (BTW, S3 is a great phone but I prefer the Z10 after having the weekend to use the Android phones).
16) Ability to freely place icons on the homesreen. Currently, icons are forced top left-right-to-bottom. I prefer to space my icons out.
17) Add a contact to the homescreen. I'd like to place a shortcut (similar to a Webpage) to the homescreen for a contact which will open up the contact. Android allows this feature and so did my previous 9800.
18) Search Contacts by nickname. The contacts app doesn't allow me to search by, e.g., Andy, even if I have that as my contact's nickname. The previous OS allowed this type of search which was very helpful.
Finally, as a note, I've been using the BlackBerry Z10 for the past 2 weeks and it's a great platform. I just bought two Samsung Galaxy S3 phones over the weekend for my parents so they could use the Korean language input and related features so I spent a lot of time with the Android platform, setting it up and teaching them how to use it. The S3 is a great phone too.
I prefer, however, the way BlackBerry has done their OS 10 and the integrated management of messages.
It's too bad that BB doesn't have Korean input and apps like Kakao Talk or I would have considered it for them.
The BlackBerry 10 is a great platform and I look forward to the continual improvements that will only make the experience better.This is a great post.
I couldn't have written it myself better.
I'm also in dying need of Korean input as I can't communicate with my Korean friends.
But I second every point.
I hope the tech teams are reading this. -
Issue in ALV List display
Posted: Apr 5, 2008 10:25 AM Edit E-mail this message Reply
Hi Friends,
Can any one help me out in the logic to display the output in the ALV list.
i want to get the out put as
based on the field4 i have to display fieds5, field6 and field 7 values as mentioned below.
field1 field2 field3 field4 field5 field6 field7
0L 123 456 2008 001 123.00 456.00
- - - - 002 213.00 789.00
- - - 003 0.00 0.00
- - - 004 0.00 0.00
- - - 005 0.00 0.00
- - - 006 0.00 0.00
336.00 1245.00
Thanks,
Vijayfor display you have to define fieldcatlaog and use Fm RESUE_ALV_GRID_DISPLAY,
Go through this program
*& Report Z_OPEN_CLOSE *
REPORT Z_OPEN_CLOSE MESSAGE-ID YW2 LINE-SIZE 231 LINE-COUNT 45
NO STANDARD PAGE HEADING.
Type Declaration *
TYPE-POOLS SLIS.
Tables *
TABLES: MKPF, " Material Document: Header Data
MSEG, " Material Document: Item Data
MARA,
MARD,
S031,
EKKO,
EKPO,
LIKP,
MAKT,
J_1IWRKCUS,
T001W,
WB2_V_MKPF_MSEG2,
MMIM_REP_PRINT,
YW2_STKMOVEMENTS,
YPLNT,
MARDH.
Internal Tables *
DATA: I_WERKS LIKE J_1IWRKCUS OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_YPLNT OCCURS 0,
PPLNT LIKE YPLNT-PPLNT,
WPLNT LIKE YPLNT-WPLNT,
END OF I_YPLNT.
DATA: BEGIN OF I_MKPF OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
MJAHR LIKE MKPF-MJAHR,
BUDAT LIKE MKPF-BUDAT,
VGART LIKE MKPF-VGART,
BWART LIKE MSEG-BWART,
MATNR LIKE MSEG-MATNR,
WERKS LIKE MSEG-WERKS,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
KUNNR LIKE MSEG-KUNNR,
ZEILE LIKE MSEG-ZEILE,
XAUTO LIKE MSEG-XAUTO,
SHKZG LIKE MSEG-SHKZG,
MATNR1 LIKE MSEG-MATNR,
END OF I_MKPF.
DATA: BEGIN OF I_MARDH OCCURS 0,
WERKS LIKE MARDH-WERKS,
MEINS LIKE MARA-MEINS,
MATNR LIKE MARDH-MATNR,
LGORT LIKE MARDH-LGORT,
LABST LIKE MARDH-LABST,
LFGJA LIKE MARDH-LFGJA, "Added -MB
LFMON LIKE MARDH-LFMON, "Added -MB
PERIO(6),
INSME LIKE MARDH-LABST,
EINME LIKE MARDH-LABST,
SPEME LIKE MARDH-LABST,
RETME LIKE MARDH-LABST,
O_STK LIKE MARDH-LABST, " Opening Stock
C_STK LIKE MARDH-LABST, " Closing Stock
END OF I_MARDH.
DATA: BEGIN OF I_MARD OCCURS 0,
WERKS LIKE MARD-WERKS,
MATNR LIKE MARD-MATNR,
LGORT LIKE MARD-LGORT,
LABST LIKE MARD-LABST,
INSME LIKE MARD-LABST,
MEINS LIKE MARA-MEINS,
EINME LIKE MARD-LABST,
SPEME LIKE MARD-LABST,
RETME LIKE MARD-LABST,
END OF I_MARD.
DATA: I_MARD1 LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: I_MARDH1 LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_MKPF1 OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
WERKS LIKE MSEG-WERKS,
MATNR LIKE MSEG-MATNR,
BUDAT LIKE MKPF-BUDAT,
BWART LIKE MSEG-BWART,
MJAHR LIKE MKPF-MJAHR,
VGART LIKE MKPF-VGART,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
XAUTO LIKE MSEG-XAUTO,
SHKZG LIKE MSEG-SHKZG,
END OF I_MKPF1.
DATA: BEGIN OF I_MKPF2 OCCURS 0,
WERKS LIKE MSEG-WERKS,
MATNR LIKE MSEG-MATNR,
BUDAT LIKE MKPF-BUDAT,
BWART LIKE MSEG-BWART,
MJAHR LIKE MKPF-MJAHR,
VGART LIKE MKPF-VGART,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
XAUTO LIKE MSEG-XAUTO,
END OF I_MKPF2.
DATA: BEGIN OF I_FINAL5 OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
LGORT LIKE MSEG-LGORT, " Storage Location
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TLOSS LIKE MARDH-LABST, " Total Loss
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
C_STK LIKE MARDH-LABST, " Closing Stock
TRFSTK LIKE MARDH-LABST, "Transfer stock
MENGE LIKE MSEG-MENGE,
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL5.
DATA: BEGIN OF I_FINAL OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL.
DATA: I_FINAL1 LIKE I_FINAL OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_FINAL_TEMP OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
MTART LIKE MARA-MTART, " Material Type
MAKTX LIKE MAKT-MAKTX, " Description
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL_TEMP.
For Materials
DATA: BEGIN OF I_MARA OCCURS 0,
MATNR TYPE MARA-MATNR,
MTART TYPE MARA-MTART,
MEINS LIKE MARA-MEINS,
LABST TYPE MARD-LABST,
MAKTX LIKE MAKT-MAKTX,
END OF I_MARA.
DATA: BEGIN OF I_STKMVMNTS OCCURS 0,
BWART LIKE MSEG-BWART,
SHKZG LIKE MSEG-SHKZG,
VZBEW LIKE YW2_STKMOVEMENTS-VZBEW,
END OF I_STKMVMNTS.
DATA: BEGIN OF I_FINALT OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
MONTH(8) ,
END OF I_FINALT.
DATA: IMKPFT LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT1 LIKE I_MKPF1 OCCURS 0 WITH HEADER LINE.
DATA: IMARDT LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: IMARDHT LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: T_FINAL LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT2 LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
FCAT is used for the field catalog
DATA: FCAT TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
for excluding the ICONs from the application toolbar
FEXC TYPE TABLE OF SLIS_EXTAB WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO is used for Grid Layout
FS_LAYO TYPE SLIS_LAYOUT_ALV,
FEVENTS to handle the events TOP OF PAGE & USER_COMMAND
FEVENTS TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FHEADER is used for List header
FHEADER TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
sort is used for sorting
FSORT TYPE TABLE OF SLIS_SORTINFO_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FCAT1 TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO1 TYPE SLIS_LAYOUT_ALV,
GT_LIST_TOP_OF_PAGE1 TYPE SLIS_T_LISTHEADER,
FEVENTS1 TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FHEADER1 TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT
KEY WITH HEADER LINE INITIAL SIZE 0,
G_STATU_071 TYPE SLIS_FORMNAME VALUE 'Z_PFSTATUS',
ALV_VARIANT1 LIKE DISVARIANT.
Variable Declaration *
TYPES: TRFF_TYPE_DEC_6_5(6) TYPE P DECIMALS 5.
DATA: FYEAR(4),
MON(2),
FYEAR1(4),
MON1(2),
OBAL LIKE MARD-LABST,
CBAL LIKE MARD-LABST,
INDEX TYPE I,
COUNT,
COUNT1 TYPE I,
O_STK TYPE P DECIMALS 3,
C_STK TYPE P DECIMALS 3,
V_MJAHR LIKE MKPF-MJAHR,
MONTHS TYPE TRFF_TYPE_DEC_6_5,
MONTH TYPE I.
Global variables for handling ALV functionality
DATA: ALV_KEYINFO TYPE SLIS_KEYINFO_ALV,
ALV_VARIANT LIKE DISVARIANT,
ALV_LAYOUT TYPE SLIS_LAYOUT_ALV,
ALV_REPID LIKE SY-REPID,
ALV_PRINT TYPE SLIS_PRINT_ALV,
ALV_DETAIL_FUNC(30),
ALV_DEFAULT_VARIANT LIKE DISVARIANT-VARIANT,
ALV_COLOURIZE_FIELDS LIKE MMIM_REP_PRINT-COLOR.
RANGES: R_BUDAT FOR MKPF-BUDAT.
*Added by Prabhu for year on 26.4.05.
DATA: IDATE LIKE R_BUDAT OCCURS 0 WITH HEADER LINE.
Selection Screen Elements *
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_WERKS FOR MARD-WERKS OBLIGATORY NO INTERVALS.
PARAMETER: P_SPMON LIKE S031-SPMON NO-DISPLAY .
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY,
S_LGORT FOR MSEG-LGORT NO-EXTENSION NO INTERVALS,
S_MBLNR FOR MKPF-MBLNR,
S_BUDAT FOR MKPF-BUDAT OBLIGATORY .
SELECTION-SCREEN END OF BLOCK BLK.
SELECTION-SCREEN BEGIN OF BLOCK BLK3 WITH FRAME TITLE TEXT-004.
PARAMETER : MTART LIKE MARA-MTART DEFAULT 'FERT' NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK BLK3.
SELECTION-SCREEN BEGIN OF BLOCK BLK2 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN END OF BLOCK BLK2.
ADDED BY PRABHU FOR DAY-WISE REPORT.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-007.
PARAMETERS: D1 RADIOBUTTON GROUP P1 DEFAULT 'X',
M1 RADIOBUTTON GROUP P1,
Y1 RADIOBUTTON GROUP P1.
SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-006.
PARAMETERS: ALV_DEF LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF BLOCK B2.
DATA: S_BUDAT1 LIKE S_BUDAT OCCURS 0 WITH HEADER LINE."prabhu
Initialization *
INITIALIZATION.
PERFORM ALV_INIT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ALV_DEF.
PERFORM ALV_F4.
At Selection Screen
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_spmon.
PERFORM monat_f4.
At Selection Screen *
AT SELECTION-SCREEN.
checking for the layout
PERFORM ALV_CHECK.
authorisation check for the Plant
PERFORM auth_check.
Validation for the Plant
PERFORM VALIDITY_CHECK.
IF MTART NE 'FERT'.
MESSAGE E041 WITH 'Material Type must be FERT Only...'.
ENDIF.
IF D1 = 'X'." On 26.4.05.
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
ELSE.
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
ENDIF.
LOOP AT S_BUDAT.
IF S_BUDAT-HIGH IS INITIAL.
S_BUDAT-HIGH = S_BUDAT-LOW.
MODIFY S_BUDAT.
ENDIF.
ENDLOOP.
IDATE-LOW = S_BUDAT-LOW.
IDATE-HIGH = S_BUDAT-HIGH.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
EXPORTING
I_DATE_FROM = IDATE-LOW
I_DATE_TO = IDATE-HIGH
IMPORTING
E_DAYS =
E_MONTHS = MONTH
E_YEARS =
DATA: I(3) TYPE C.
I = S_BUDAT-LOW+4(2).
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*added by Prabhu for Only for Oneday.on 18.5.5
IF MONTH EQ '0'.
MONTH = MONTH + 1.
ENDIF.
*added by Prabhu for Only for Oneday.on 18.5.5
DO MONTH TIMES.
R_BUDAT-LOW = S_BUDAT-LOW.
APPEND R_BUDAT.
ENDDO.
I = 0.
LOOP AT R_BUDAT.
R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2) + I.
I = I + 1.
R_BUDAT-LOW+6(2) = '01'.
MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
EXPORTING
DAY_IN = R_BUDAT-LOW
IMPORTING
LAST_DAY_OF_MONTH = R_BUDAT-HIGH
EXCEPTIONS
DAY_IN_NO_DATE = 1
OTHERS = 2
MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
IF R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2).
R_BUDAT-LOW = S_BUDAT-LOW.
MODIFY R_BUDAT.
ENDIF.
IF R_BUDAT-HIGH4(2) = S_BUDAT-HIGH4(2).
R_BUDAT-HIGH = S_BUDAT-HIGH.
MODIFY R_BUDAT.
ENDIF.
For Summary on 26.4.05.
IF Y1 = 'X'.
CLEAR R_BUDAT.
REFRESH R_BUDAT.
R_BUDAT-LOW = S_BUDAT-LOW.
R_BUDAT-HIGH = S_BUDAT-HIGH.
APPEND R_BUDAT.
CLEAR R_BUDAT.
ENDIF.
ENDLOOP.
At Selection Screen *
AT SELECTION-SCREEN OUTPUT.
Start of Selection *
START-OF-SELECTION.
V_MJAHR = P_SPMON+0(4).
Get plant distinction warehouse/production
PERFORM GET_PLANT_DISTINCTION.
Collect the data from various tables
PERFORM GETDATA_FG_STOCK.
here the number of rows in the output table is found
PERFORM OUTPUT_TABLE_CHECK.
here the top of the page code is written, that is to be displayed
in the output
PERFORM Z_TOP_OF_PAGE.
here ALV layout properties are set
PERFORM Z_LAYOUT_SETTINGS.
ALV EVENTS for TOP OF PAGE and for USER COMMAND
PERFORM Z_ALV_EVENTS.
The field catalog is defined for the Primary List is defined in
the subroutine CREATE_FIELD_CATALOG include program ZPRRDOCR_FCAT
PERFORM Z_CREATE_FIELD_CATALOG.
This is for displaying the output
PERFORM Z_REUSE_ALV_GRID_DISPLAY.
*& Form getdata_fg_stock
Getting data from standard tables
FORM GETDATA_FG_STOCK.
For getting the Start date & end date of the month
PERFORM get_month_dates.
Getting the Opening Stock from MARDH table
IF MON EQ '01'.
MON1 = MON.
FYEAR1 = FYEAR.
MON = '12'.
FYEAR = FYEAR - 1.
ELSE.
MON1 = MON.
FYEAR1 = FYEAR.
MON = MON - 1.
FYEAR = FYEAR.
ENDIF.
PERFORM GET_RECORDS_FROM_DB.
*added for Month Summary on 26.4.05.
LOOP AT R_BUDAT.
S_BUDAT-LOW = R_BUDAT-LOW.
S_BUDAT-HIGH = R_BUDAT-HIGH.
*for Month
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
*for summary.
IF Y1 = 'X'.
LOOP AT S_BUDAT.
S_BUDAT1-SIGN = 'I'.
S_BUDAT1-OPTION = 'NB'.
S_BUDAT1-LOW = S_BUDAT-LOW.
S_BUDAT1-HIGH = S_BUDAT-HIGH.
APPEND S_BUDAT1.
CLEAR S_BUDAT1.
ENDLOOP.
ENDIF.
IMKPFT[] = I_MKPF[].
IMKPFT2[] = I_MKPF[].
IMARDT[] = I_MARD[].
IMARDHT[] = I_MARDH[].
PERFORM MONTH_WISE.
PERFORM PROCESS_MOVEMENTS.
PERFORM CALCULATE_OPENING_STOCK.
PERFORM UPDATE_NON_TRANSACTION_ITMS.
PERFORM DELETE_EMPTY_RECORDS.
CLEAR: IMARDHT,IMARDT,IMKPFT1,IMKPFT,I_FINAL,I_FINAL5.
REFRESH: IMARDHT,IMARDT,IMKPFT1,I_FINAL,I_FINAL5,IMKPFT.
ENDLOOP.
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*end of changes for month.
ENDFORM. " getdata_fg_stock
FORM MONAT_F4 *
F4-Hilfe für Monat *
FORM MONAT_F4.
DATA: BEGIN OF MF_DYNPFIELDS OCCURS 1.
INCLUDE STRUCTURE DYNPREAD.
DATA: END OF MF_DYNPFIELDS.
DATA: MF_RETURNCODE LIKE SY-SUBRC,
MF_MONAT LIKE ISELLIST-MONTH,
MF_HLP_REPID LIKE SY-REPID.
FIELD-SYMBOLS: .
Wert von Dynpro lesen
GET CURSOR FIELD MF_DYNPFIELDS-FIELDNAME.
APPEND MF_DYNPFIELDS.
MF_HLP_REPID = SY-REPID.
DO 2 TIMES.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = MF_HLP_REPID
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = MF_DYNPFIELDS
EXCEPTIONS
INVALID_ABAPWORKAREA = 01
INVALID_DYNPROFIELD = 02
INVALID_DYNPRONAME = 03
INVALID_DYNPRONUMMER = 04
INVALID_REQUEST = 05
NO_FIELDDESCRIPTION = 06
UNDEFIND_ERROR = 07.
IF SY-SUBRC = 3.
Aktuelles Dynpro ist Wertemengenbild
MF_HLP_REPID = 'SAPLALDB'.
ELSE.
READ TABLE MF_DYNPFIELDS INDEX 1.
Unterstriche durch Blanks ersetzen
TRANSLATE MF_DYNPFIELDS-FIELDVALUE USING '_ '.
EXIT.
ENDIF.
ENDDO.
IF SY-SUBRC = 0.
Konvertierung ins interne Format
CALL FUNCTION 'CONVERSION_EXIT_PERI_INPUT'
EXPORTING
INPUT = MF_DYNPFIELDS-FIELDVALUE
IMPORTING
OUTPUT = MF_MONAT
EXCEPTIONS
ERROR_MESSAGE = 1.
IF MF_MONAT IS INITIAL.
Monat ist initial => Vorschlagswert aus akt. Datum ableiten
MF_MONAT = SY-DATLO(6).
ENDIF.
CALL FUNCTION 'POPUP_TO_SELECT_MONTH'
EXPORTING
ACTUAL_MONTH = MF_MONAT
IMPORTING
SELECTED_MONTH = MF_MONAT
RETURN_CODE = MF_RETURNCODE
EXCEPTIONS
FACTORY_CALENDAR_NOT_FOUND = 01
HOLIDAY_CALENDAR_NOT_FOUND = 02
MONTH_NOT_FOUND = 03.
IF SY-SUBRC = 0 AND MF_RETURNCODE = 0.
ASSIGN (MF_DYNPFIELDS-FIELDNAME) TO <MF_FELD>. " ==>> note 148804
<MF_FELD> = MF_MONAT.
CALL FUNCTION 'CONVERSION_EXIT_PERI_OUTPUT'
EXPORTING
INPUT = MF_MONAT
IMPORTING
OUTPUT = MF_DYNPFIELDS-FIELDVALUE.
COLLECT MF_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
DYNAME = MF_HLP_REPID
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = MF_DYNPFIELDS
EXCEPTIONS
INVALID_ABAPWORKAREA = 01
INVALID_DYNPROFIELD = 02
INVALID_DYNPRONAME = 03
INVALID_DYNPRONUMMER = 04
INVALID_REQUEST = 05
NO_FIELDDESCRIPTION = 06
UNDEFIND_ERROR = 07. "<<== note 148804
ENDIF.
ENDIF.
ENDFORM. "MONAT_F4
*& Form get_month_dates
Calculating the Month Start & End Date
FORM GET_MONTH_DATES.
IF M1 = 'X'.
FYEAR = P_SPMON+0(4).
MON = P_SPMON+4(2).
CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
R_BUDAT-SIGN = 'I'.
R_BUDAT-OPTION = 'BT'.
CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
EXPORTING
I_DATE = R_BUDAT-LOW
IMPORTING
E_DATE = R_BUDAT-HIGH.
APPEND R_BUDAT.
CLEAR S_BUDAT.
REFRESH S_BUDAT.
S_BUDAT-SIGN = 'I'.
S_BUDAT-OPTION = 'BT'.
S_BUDAT-LOW = R_BUDAT-LOW.
S_BUDAT-HIGH = R_BUDAT-HIGH.
APPEND S_BUDAT.
ELSE.
FYEAR = P_SPMON+0(4).
MON = P_SPMON+4(2).
CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
R_BUDAT-SIGN = 'I'.
R_BUDAT-OPTION = 'BT'.
CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
EXPORTING
I_DATE = R_BUDAT-LOW
IMPORTING
E_DATE = R_BUDAT-HIGH.
APPEND R_BUDAT.
ENDIF.
ENDFORM. " get_month_dates
*& Form output_table_Check
checking for records for output
FORM OUTPUT_TABLE_CHECK .
DESCRIBE TABLE I_FINALT LINES INDEX.
IF INDEX EQ 0.
MESSAGE I041 WITH TEXT-005.
LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. "OUTPUT_TABLE_CHECK
*& Form Z_TOP_OF_PAGE
for setting the details in the top of page *
has no formal paramters *
FORM Z_TOP_OF_PAGE.
DATA: V_MON(2),
V_YR(40),
V_FIN(18),
V_FIN1(48),
LOW(10),
HIGH(10).
V_MON = P_SPMON+4(2).
V_YR = P_SPMON+0(4).
FHEADER-TYP = 'H'.
FHEADER-INFO = 'Stock Register Report (FG Stock)'.
APPEND FHEADER.
CLEAR FHEADER.
*if m1 = 'X'.
CONCATENATE 'Month = ' v_mon '.' v_yr INTO v_fin.
fheader-typ = 'H'.
fheader-info = v_fin.
APPEND fheader.
CLEAR fheader.
*endif."prabhu on 18.5.5
IF D1 = 'X'.
CLEAR S_BUDAT.
LOOP AT S_BUDAT.
CONCATENATE S_BUDAT-LOW6(2) '/' S_BUDAT-LOW4(2) '/'
S_BUDAT-LOW+0(4) INTO LOW.
CONCATENATE S_BUDAT-HIGH6(2) '/' S_BUDAT-HIGH4(2) '/'
S_BUDAT-HIGH+0(4) INTO HIGH.
CONCATENATE 'Date = ' LOW ' - ' HIGH INTO V_FIN1.
FHEADER-TYP = 'H'.
FHEADER-INFO = V_FIN1.
APPEND FHEADER.
CLEAR FHEADER.
ENDLOOP.
ENDIF.
ENDFORM. " Z_TOP_OF_PAGE
*& Form Z_LAYOUT_SETTINGS
this is done for setting the properties for the layout of the *
grid *
has no formal paramters *
FORM Z_LAYOUT_SETTINGS.
FS_LAYO-ZEBRA = 'X'. " Output in Zebra pattern
FS_LAYO-DETAIL_POPUP = 'X'. " A popup window appears to give
FS_LAYO-DETAIL_TITLEBAR = TEXT-022.
FS_LAYO-COLWIDTH_OPTIMIZE = 'X'.
ENDFORM. " Z_LAYOUT_SETTINGS
*& Form Z_ALV_EVENTS
This is used for handling the events TOP OF PAGE and the USER *
COMMAND event *
has no formal paramters *
FORM Z_ALV_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = FEVENTS[].
READ TABLE FEVENTS WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC = 0.
FEVENTS-FORM = 'Z_TOPOFPAGE'.
MODIFY FEVENTS INDEX SY-TABIX.
CLEAR FEVENTS.
ENDIF.
READ TABLE FEVENTS WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC = 0.
FEVENTS-FORM = 'Z_USER_COMMAND'.
MODIFY FEVENTS INDEX SY-TABIX.
CLEAR FEVENTS.
ENDIF.
ENDFORM. "Z_ALV_EVENTS
*& Form Z_CREATE_FIELD_CATALOG
here the field catalog is created for the primary list *
no formal parameters *
FORM Z_CREATE_FIELD_CATALOG.
for the Plant
FCAT-FIELDNAME = 'WERKS'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000005'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Plant'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Type
FCAT-FIELDNAME = 'MTART'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000006'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MatTyp'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material No.
FCAT-FIELDNAME = 'MATNR'.
FCAT-KEY = 'X'.
fcat-hotspot = 'X'.
FCAT-OUTPUTLEN = '000018'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Material'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Description
FCAT-FIELDNAME = 'MAKTX'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '000040'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Description'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Unit of Measure
FCAT-FIELDNAME = 'MEINS'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '03'.
FCAT-JUST = 'C'.
FCAT-SELTEXT_M = 'UOM'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'UNIT'.
APPEND FCAT.
CLEAR FCAT.
for the Plant
FCAT-FIELDNAME = 'MONTH'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '08'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MONTH'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Opening Stock
FCAT-FIELDNAME = 'C_STK'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Opening Stock'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
fcat-do_sum = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Total Receipts
FCAT-FIELDNAME = 'TRECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Receipts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Production
FCAT-FIELDNAME = 'PRODU'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Production'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Other Plant Receipts
FCAT-FIELDNAME = 'RECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Othr Plnt Recpts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Sales Return
FCAT-FIELDNAME = 'SAL_RET'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Sales Return'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Total Dispatches
FCAT-FIELDNAME = 'TDISP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Dispatches'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT. -
Hi Team,
I am site collection admin of a SP13 site. The issue is we have added some of the users manually after we got requests from them for site access. But this has left those users as pending on Access requests page. We don't want that list to stack up.
I can not decline those requests as those users will be notified with declined mail. I searched for clearing the list of those pending requests but did't find any guidelines for this.
Is there any way I can do this. Any help is appreciated thanks in advanceYou might consider using PowerShell to remove unwanted items from the "Access Requests" list of the web site. This list holds all of the access requests including pending, declined and approved. The following example demonstrates removing
the first item from the list. Please note, I'm not aware whether or not there are any negative side effects to removing items from this list so doing so would be at your own risk.
$web = get-spweb https://yoursharepointsite
$list = $web.lists["Access Requests"]
$list.items[0].delete() -
Error while creating request list Unable to detect the SAP system directory
We are upgrading SAP BW (NW 7.0 EHP1) to SAP BW (NW 7.3)
source OS: Windows 2008 R2, source DB: MSSQL server 2008 R2 SP1 CU3
I had started the upgrade by running: STARTUP.BAT
I had started the DSUGui on the server (CI / DB on the same server) from: D:\usr\sap\BP1\upg\sdt\exe\DSUGui.bat
I ran both programs (run as administrators).
Once SAP Gui connects and was able to create userid/ password and when ready to start the initialization phase (click next)
gives me the error
Error while creating request list - see preceeding messages. Unable to detect the SAP system directory on the local host
I had tried STARTUP.BAT "jce_policy_zip=Z:\export-import\downloads\jce_policy-6' and still the same error.
I had started DSUGui.bat with trace and the trace file contents are
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[D:
usr
sap
bp1
upg
sdt
trc
server.trc]/>
<!PATTERN[server.trc]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:102) [Thread[ExecuteWorker,5,main]]: Execution of command com.sap.sdt.engine.core.communication.CmdActionEvent@376433e4 failed: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.CmdActionEvent [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
at com.sap.sdt.dsu.service.req.DSURequestListBuilder.persistSystemInfo(DSURequestListBuilder.java:277)
at com.sap.sdt.dsu.service.DSUService.createRequestList(DSUService.java:338)
at com.sap.sdt.dsu.service.controls.DSUListener.actionNext(DSUListener.java:144)
at com.sap.sdt.dsu.service.controls.DSUListener.actionPerformed(DSUListener.java:67)
at com.sap.sdt.server.core.controls.SDTActionListener$Listener.actionPerformed(SDTActionListener.java:46)
at com.sap.sdt.engine.core.communication.CmdActionEvent.actOnEvent(CmdActionEvent.java:43)
at com.sap.sdt.engine.core.communication.CmdEvent.execute(CmdEvent.java:69)
at com.sap.sdt.engine.core.communication.ExecWorker.handleCmd(ExecWorker.java:36)
at com.sap.sdt.engine.core.communication.AbstractWorker.run(AbstractWorker.java:93)
I could not get Upgrade started. Any help is appreciated
Thanks
PrathapDid you get this solved?
I have the same problem -
Error while creating request list DSU execution error in Upgrade PI
Hello,
I´m doing upgrade de PI 3.0 - 7.0 in mscs and run startup.bat...
DSU execution error on hostnode1.domain.sap
Error while creating request list - see proceeding messages
Instance profile for instance 00 on host hostnode1 not found profile SID_w*00_hostnode1 not found in directory ...../usr(sap/SID/profile
Help please.
Luis
Edited by: Luis Maura on Nov 5, 2010 1:38 PMInstance profile for instance 00 on host hostnode1 not found profile SID_\w*00_hostnode1 not found in directory
hostnode1 is physical or virtual ?, this file SID_\w00_hostnode1* exist or not .
compare the GLOBAL HOSTNAME settings in profiles of Default,Instance and start
Regards, -
Sort/Order By for Request lists, other LOVs
There are many LOVs in the eBusiness Suite that are seemingly unsorted and have no logic to how they are displayed. Is there a way to force these LOVs to order alphabetically or any other way to arrange them? I realize that custom LOVs can be done this way by just adding an order by to the query that pulls the values but I have seen no place to change non-custom ones. I'm specifically looking for a way to sort the available request list (View->Requests->Submit New Request->Single Request->First field in the form
Thanks in advance!
Message was edited by:
mateoc15Requests are already sorted by Application name, Report Name .. I do not think there is a way to change this order.
Maybe someone in this thread can help in this. -
[svn] 3246: Fix fasttrack bug SDK-16910 - Simple List populated with strings throws RTE .
Revision: 3246
Author: [email protected]
Date: 2008-09-17 15:31:25 -0700 (Wed, 17 Sep 2008)
Log Message:
Fix fasttrack bug SDK-16910 - Simple List populated with strings throws RTE. This is fallout from the Group/DataGroup split. DefaultItemRenderer now uses a TextBox instead of a Group to show the list data.
QE: Any List tests that depended on the default item renderer to support anything other than text must be updated.
Bugs: SDK-16910
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16910
http://bugs.adobe.com/jira/browse/SDK-16910
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/DefaultItemRenderer.mxmlBTW, I do not experience the bug you had mentioned at
http://www.cs.rit.edu/~cxb0025/flex/TreeControlBugs.html
Can submit a video of my actions recorded -
Form to submit a bug or feature request to Adobe is currently unavailable
The form found at http://adobe.com/go/wish to submit a bug or feature request to Adobe is currently unavailable.
I will update this thread when it is online again.The bug or feature request form is now available again.
http://adobe.com/go/wish -
Problems issuing continuous requests to a server through URLConnection
Hi ,
I have a URLConnection object 'uc' obtained from a URL object tied to a server URL.
i m issuing HTTP requests continously to this server by calling ' uc = u.openConnection()' everytime
Hence this will return me a new URL Connection object everytime.
After some 300-400 requests, the program ends abruptly , this may be due to shortage of resources to be allocated to the I/O streams of the URL connection.
My question is -is there some way to issue multiple requests from the same URL Connection object ? or is there some other method of issuing multiple requests which does not consume a lot of resources ?
Note: The server accepts only GET method, so i cant write the contents to the output stream of the connection to translate it to a new request every time .
ThanxMy question is -is there some way to issue multiple
requests from the same URL Connection object ? or is
there some other method of issuing multiple requests
which does not consume a lot of resources ?
A HttpURLConnection instance can only be used to issue one http request. What can be re-used is the underlying TCP connection, with the keep-alive header (HTTP 1.1 persistent connections). But that should be handled transparently and by default by the servlet engine.
The later is able to manipulate the stream to increase performance, if you do not close the stream, i.e you don't call conn.disconnect() or by specify the "Connection: close" request property
( conn.setRequestProperty("Connection", "close") )
So, you shouldn't actually close the steam, just flush it (if you close it, the physical socket connection will be terminated).
All the http persistent connection/keep-alive issues were apparently fixed in J2SE 1.4.1 ....(are you using 1.4 ?)
To optimize further, you could take a look at :
http://jakarta.apache.org/commons/httpclient/ -
Perfomance issue with SharePoint List.
Current System:
Our application (for submitting and publishing articles) is using WSS 3.0
to store content and host workflows.
Article content like PDFs, Images & Videos are stored in a SharePoint document library.
There is also a list in which we have configured a custom state machine workflow. While creating an list SP item from the UI, instance of the configured workflow instance will be triggered and start monitoring.
Each article belongs to a Journal. We have TBs of data stored in content databases. Initially there was only one site collection (“http://<myweb:8080>/ArtcleLibrary”) and entire article data was storing it the same document library.
Later we decided to split the document library based on journal.
To achieve better scalability, we have now changed the application architecture by creating site collection for each journal and keep article content (there are many articles in a journal) in corresponding site collections. We have added more content databases
and sites collections are equally distributed among these Dbs.
Now it is like (“http://<myweb:8080>/<journalID>/ ArtcleLibrary”)
Actual Problem:
We have achieved scalability in the case of content management by splitting document libraries among different site collections and content databases.
But still the SP list for managing workflow is in the initial site collection (“http://<myweb>:8080/WorkflowTasks”). This single list contains now 60,000 items (=60,000 workflow instances) even if we deleted completed list items older than 3 months.
We have performance issues with the current workflow list. It is taking time (avg 20s) to create/read list item from the SP List. Sometimes items are not getting created in the list item.
From MSDN I came to know than there are recommended count for items in SPList (2000
or 5000 items).
What is the best solution to solve the above performance issue with SharePoint list?
Whether the above mentioned our approach to document library will work for SP list also (means split current SP List and keep in each Journal site collection)?
Please advise.Hi Andrew,
Thanks for your post.
I still have some doubts.
If we go like this, will OWSTIMER be able to handle workflows (custom workflow is attached to SP List) of these many site collections. We have now more than 600 site collections. -
Hi,
I have requirement to track the goods issued to production with reference to the order/pick list. The goods are moved from warehouse to production location using 313 mvt and received at production storage location using 315, Once the consumption recordings are completed and any stock remaining at the production storage location, we need to identify against which order this stock belongs to. WM is implemented for the main store but production store is not part of the WM.
Regards
CheruHi Jatin,
The requirement is to move the stock from main warehouse to the production store. We want to issue the goods against the pick list from main warehouse to production store. The ware house will do the goods issue against the pick list and the production will receive the goods at their storage location. So we could track what goods issued against which pick list. Once the goods are at the production location, consumption will recording will be done against the production order. We do not want to do the goods issue against pick list from the warehouse using mvt 261.
Regards
Cheru -
I suspected there is a software bug issues with the Wifi once you first install the Windows 10 Preview Technical Enterprise.
Hi
Can you explain more please?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Getting Transport Request List from Clients
Hi,
I need to fetch all the transport request list which exist in other clients from development client. Is there any function module to fetch the data.
Can someone provide me the code so that it will be useful for coding in my program.
People will be rewarded for the solution which helps me a lot.
Thanks,
JyothiHi,
You will like the french comment
* Procédure P_FIND_DATA. *
form p_find_data.
data : it_request type tmsiqreqs ,
it_tmp_request type tmsiqreqs with header line ,
it_e070 type sorted table of e070
with header line
with unique key trkorr .
data : begin of it_trfunction occurs 10 ,
domvalue_l type domvalue_l ,
ddtext type val_text ,
end of it_trfunction ,
begin of it_trstatus occurs 10 ,
domvalue_l type domvalue_l ,
ddtext type val_text ,
end of it_trstatus ,
begin of it_trimpflg occurs 10 ,
domvalue_l type domvalue_l ,
ddtext type val_text ,
end of it_trimpflg .
* Recherche des données sur le système C27.
call function 'TMS_UIQ_IQD_READ_QUEUE'
exporting
iv_system = 'C27'
iv_domain = 'DOMAIN_D27'
importing
et_requests = it_request.
it_tmp_request[] = it_request[].
loop at it_tmp_request
where owner in s_bname
and trkorr in s_trkorr.
move-corresponding it_tmp_request to it_data.
move : it_tmp_request-sysnam to it_data-csysnam ,
it_tmp_request-impflg to it_data-cimpflg ,
it_tmp_request-maxrc to it_data-cmaxrc .
append it_data.
clear it_data.
endloop.
* Tri.
sort it_data.
* Recherche des données sur le système P27.
refresh : it_tmp_request, it_request.
call function 'TMS_UIQ_IQD_READ_QUEUE'
exporting
iv_system = 'P27'
iv_domain = 'DOMAIN_D27'
importing
et_requests = it_request.
it_tmp_request[] = it_request[].
loop at it_tmp_request
where owner in s_bname
and trkorr in s_trkorr.
read table it_data
with key trkorr = it_tmp_request-trkorr.
if sy-subrc eq space.
move : it_tmp_request-sysnam to it_data-psysnam ,
it_tmp_request-impflg to it_data-pimpflg ,
it_tmp_request-maxrc to it_data-pmaxrc .
modify it_data
transporting : psysnam pimpflg pmaxrc
where trkorr = it_tmp_request-trkorr.
else.
move-corresponding it_tmp_request to it_data.
move : it_tmp_request-sysnam to it_data-psysnam ,
it_tmp_request-impflg to it_data-pimpflg ,
it_tmp_request-maxrc to it_data-pmaxrc .
append it_data.
clear it_data.
endif.
endloop.
* Recherche des données générales sur l'ordre.
select trkorr trfunction trstatus as4user as4date as4time
into corresponding fields of table it_e070
from e070
where as4user in s_bname
and strkorr eq space
and trkorr in s_trkorr.
* Recherches des textes desciptifs.
select domvalue_l ddtext
into table it_trfunction
from dd07t
where domname eq 'TRFUNCTION'
and ddlanguage eq sy-langu.
select domvalue_l ddtext
into table it_trstatus
from dd07t
where domname eq 'TRSTATUS'
and ddlanguage eq sy-langu.
select domvalue_l ddtext
into table it_trimpflg
from dd07t
where domname eq 'TRTPIMPFLG'
and ddlanguage eq sy-langu.
* Enregistre les informations dans la table IT_DATA.
loop at it_data.
read table it_e070
with key trkorr = it_data-trkorr.
if sy-subrc eq space.
* Recherche libelle du code TRFUNCTION.
read table it_trfunction
with key domvalue_l = it_e070-trfunction.
if sy-subrc eq space.
move it_trfunction-ddtext to it_data-trfunctiont.
endif.
* Recherche libelle du code TRSTATUS.
read table it_trstatus
with key domvalue_l = it_e070-trstatus.
if sy-subrc eq space.
move it_trstatus-ddtext to it_data-trstatust.
endif.
* Recherche libelle du code CIMPFLG.
read table it_trimpflg
with key domvalue_l = it_data-cimpflg.
if sy-subrc eq space.
move it_trimpflg-ddtext to it_data-cimpflgt.
endif.
* Recherche libelle du code PIMPFLG.
read table it_trimpflg
with key domvalue_l = it_data-pimpflg.
if sy-subrc eq space.
move it_trimpflg-ddtext to it_data-pimpflgt.
endif.
move-corresponding it_e070 to it_data.
modify it_data.
delete it_e070
where trkorr = it_data-trkorr.
endif.
endloop.
* Ajoute les ordres qui n'ont pas encore été liberrés.
loop at it_e070.
clear it_data.
move-corresponding it_e070 to it_data.
* Recherche libelle du code TRFUNCTION.
read table it_trfunction
with key domvalue_l = it_e070-trfunction.
if sy-subrc eq space.
move it_trfunction-ddtext to it_data-trfunctiont.
endif.
* Recherche libelle du code TRSTATUS.
read table it_trstatus
with key domvalue_l = it_e070-trstatus.
if sy-subrc eq space.
move it_trstatus-ddtext to it_data-trstatust.
endif.
* Recherche libelle du code CIMPFLG.
read table it_trimpflg
with key domvalue_l = it_data-cimpflg.
if sy-subrc eq space.
move it_trimpflg-ddtext to it_data-cimpflgt.
endif.
* Recherche libelle du code PIMPFLG.
read table it_trimpflg
with key domvalue_l = it_data-pimpflg.
if sy-subrc eq space.
move it_trimpflg-ddtext to it_data-pimpflgt.
endif.
append it_data.
endloop.
sort it_data.
* Recherche des libellés des ordres.
loop at it_data.
select single as4text
into it_data-as4text
from e07t
where trkorr eq it_data-trkorr
and langu eq sy-langu.
if sy-subrc eq space.
modify it_data.
endif.
endloop.
* Modifie les codes pour positionner les icones.
loop at it_data.
case it_data-cmaxrc.
when ' '.
move '@EB@' to it_data-cmaxrc.
when '0000'.
move '@08@' to it_data-cmaxrc.
when '0004'.
move '@09@' to it_data-cmaxrc.
when others.
move '@0A@' to it_data-cmaxrc.
endcase.
case it_data-pmaxrc.
when ' '.
move '@EB@' to it_data-pmaxrc.
when '0000'.
move '@08@' to it_data-pmaxrc.
when '0004'.
move '@09@' to it_data-pmaxrc.
when others.
move '@0A@' to it_data-pmaxrc.
endcase.
modify it_data.
endloop.
endform. " P_FIND_DATA
Maybe you are looking for
-
Error while importing process flow mdls in OWB 11.2.0.3
Hi All, I am facing below error while importing process flow mdls in OWB 11.2.0.3: ERROR Informational: MDL1328: PROJECT MTH not imported since the object in MDL file is the same as the object in the workspace. Error at line 11: MDL1261: Erro
-
Running JDeveloper 10g 10.1.3.3 side by side with JDeveloper 11g 11.1.1.0.0
Anybody running both versions? Is this possible? I found some information about migrating from a previous version in the release notes/install guide but did not see anything about running side by side. Thanks.
-
Adf ejb jpa persistance problem
Hi everyone, I`m a newbie to adf technology. I was trying Build a Web Application with JDeveloper 11g Using EJB, JPA, and JavaServer Faces tutorial ([http://www.oracle.com/technology/obe/obe11jdev/11/ejb/ejb.html]) I have a problem when I try to run
-
I have 2 issues formatting my newsletter. After going through forum postings for the last year and experimenting a bit, my need of having a TOC entry without visible Heading text has gotten a workaround. Apparently doing anything with Headings and te
-
I lost my books with the new app upgrade. I also forgot my sign in and had to do it all over. How do I get back my books in the new app?