BUGS: Multiple Undos with Single CMD-Z (and other buggy tales)

BUG #1:
In the SIDs thread (now locked) I said in response to Logic Pro Help, "Hey, after all, Logic ain't that bad". Today I've changed my mind.
In full view of my writing partner, we witnessed numerous times that Logic would undo multiple edits after hitting CMD-Z just once. I've reported this in numerous other threads I've started here on the Apple Forum. I've posted Feedback about it. Naturally, there's been no response from the company.
BUG#2a: we tried to troubleshoot why certain SMPTE-locked regions would unlock (using a key command) and other locked regions on the same MIDI track would unlock.
BUG#2b: while checking to see whether my key command for Unlock SMPTE Position was still intact or not, I went to the key command window and hit cntrl-opt-cmd-U (custom assignment) expecting that the assigned command would scroll into view in the KC window. But I should have known better --- this is one of those key combinations which will NOT cause the assigned command to scroll into view. Sure enough, entering the word "SMPTE" in the search window caused the display to show the Unlock SMPTE Postion command. So why does pressing some keys/key combinations in the KC window show the assigned command while some do not?
And we're supposed to be OK with this kind of behavior?

Hey Cozmicone,
Yes I have done that - I mapped CMD + Z but that kind of gets in the way of years of habit and is a bit frustrating and confusing when you're working quick etc...
It does work fine doing that (I have just uninstalled 3 versions of Photoshop and reinstalled CC 2014 and still no multiple undos on OPT + CMD + Z?! It's like it won't accept the key combination because if you go into map back to OPT + CMD + Z after changing it to CMD + Z it won't let you. You have to revert to default to even get that option back. C'est bizarre...non?

Similar Messages

Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?

Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?
My client requirement is process 100 files from biztalk with in 5 min ,actually it is taking 20 min .
So I decided to created same instance of the application with multiple time in BTS admin console ,as I understand biztalk admin console never allow to install same
schema’s with multiple time .
Any help can be appreciate ..

BizTalk will automatically process multiple messages on separate threads so you may need to tune your system. The following link should get you started:
http://social.technet.microsoft.com/wiki/contents/articles/7801.biztalk-server-performance-tuning-optimization.aspx
Another possibility is to set the Batch Size property on your receive location if the adapter uses batch size to determine how messages are picked up. As an example, it you want the MSMQ adapter to immediately pick up messages and start
to process them, set the batch size to 1.
You may also need to distribute the processing across multiple BizTalk servers by installing BizTalk on additional servers and joining the existing BizTalk group.
David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful.

Single report with multiple queries OR multiple reports with single query

Hello Experts,
I have a confusion regarding Live Office connection for many days. I asked many people but did not get a concrete answer. I am re-posting this question here and expecting an answer this time.
The product versions that I am using are as follows:
FrontEnd:
BOE XI 3.1 SP4 FP 4.1
Xcelsius Enterprise 2008 SP4
Backend:
SAP BW 7.0 EHP1
I have created a dashboard which is getting data from a webi report using LO connections.
The webi report has five report parts which are populated by five different queries.
Now my question is, when the five LO connections are refreshed, is the webi report refreshed five times or just once?
If the report is refreshed five times, then I guess it is better to have five different webi reports containing single report part, because in that way we can prevent same query being executed multiple times.
SO what is the best practice- to have a single report having multiple queries - OR - to create multiple webi reports with single query?
Thanks and Regards,
PASG

HI
I think Best Practice is Multiple reports with single query
Any way If LO connections refresh 5 time the query will refresh 5 timesRegards
Venkat

When iam loading multiple datatargets with single datasource request failed

when iam loading multiple datatargets with single datasource request failed
i want to delete the bad request at a time in all datatargets

Hi Neeraj,
The only thing you can do is go in to theMonitor screen of that IP and select the datatargets from the Monitor screen.In the next screen you can see all the targets included in the IP at the top.But the only bad thing is you have to manually delete the Bad request only from each target.
Regards
Sandeep

Is it possible to search for multiple folders with the same name and...

Is it possible to search for multiple folders with the same name and then select them all and change the permissions on just those folders .i.e. Search for the budget folders in all client folders and lock them down to just the project managers. Without having to go to each folder and apply the permissions.

user11919409 wrote:
Is it possible to create a Clone database with the same name of source db using RMAN ...
yes
>
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
Handle:     user11919409
Status Level:     Newbie (10)
Registered:     Dec 7, 2009
Total Posts:     102
Total Questions:     28 (22 unresolved)
why do you waste time here when you rarely get any answers to your questions?

Is it possible to integrate multiple instances with single OAM (Oracle Acce

Hi All,
Please could anyone clarify,is it possible to integrate multiple instance with single OAM(Oracle Access Manager).
We have two instance in development environment, Among them one is already integrated with OAM 11g,Now we want to integrate the second one with OAM 11g. For this already configured OAM is enough or we need to configure the another OAM separately.
Application Version is 12.1.1
Database Version : 11.1.0.7
OS : RHEL 5.3 64 bit
Thanks in advance.

Hi Hussein ,
I Ran below script,
ant -f txkEBSAuth.xml \
-Dwlshosturl=appora.corp.hexaware.com:7021 \
-Dwlsuser=weblogic \
-Dwlspwd=password1 \
-DuseDefaults=true \
-DforceDataSource=true \
-DdataSourceName=DEV \
-DdataSourceJNDIName=jndi/DEV \
-DasadminUser=SSO11GLOGIN \
-DasadminPassword=welcome1 \
-DdbcFile=/u06/oamfmw/Middleware/appsutil/accessgate/DEV/DEV.dbc \
-DserverName=AdminServer \
-DdeploymentName=ebsauth_DEV \
-DfndauthWarFile=/u06/oamfmw/Middleware/appsutil/accessgate/DEV/fndauth.war \
-DplanPath=/u06/oamfmw/Middleware/appsutil/accessgate/DEV/plan/plan.xml \
-DforceDeployment=true \
-DSSOServerRelease=11 \
-DSSOServerURL=http://appora.corp.hexaware.com:14100 \
-DWebgateLogoutURL=http://appora.corp.hexaware.com:7780/public/oacleanup.html \
-DlogConfigfile=/u06/oamfmw/Middleware/appsutil/accessgate/DEV/sample/logging.properties
-bash: ant: command not found
Thanks in advance

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
Thanks

Hi,
I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like brush etc). I can't figure out how to disable.

In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like brush etc). Whenever I try to use a tool, a blue box appears around the line and I have to double click it to manipulate it, which opens just that line in a semi burred screen where all the other objects are semi-grey in the background. I can manipulate this line in this screen but nothing else at that time which I could do about 5 minutes ago. For exampe, I no longer can join up 2 lines drawn by the line tool together. For some reason this started randomly (probably due to a accidental shortcut combination) and I just can't put it back to what it used to be. I have inserted a video hopefully showing what I mean. Any help would be appreciated.

Thank you - Just what I needed

What can I change to gain access to my work vpn. I can access with my MacBook Air and other routers. Can use my ipad and this time capsule to successfully access the VPN.

What can I change to gain access to my work vpn. I can access with my MacBook Air and other routers. Can use my ipad and this time capsule to successfully access the VPN.

You need to give us a lot more info.
I presume the MBA and the TC are the combo that doesn't work, although you don't clearly state that.
If the ipad and TC work.. are you sure the ipad is connected via the TC and not 3G network?
If it is then the TC itself is fine and the issue might be setup on the MBA.. although if the MBA works with other routers.. that rather confuses the matter.
You need to actually tell us how the TC is setup in the network. What kind of broadband modem you have and what kind of vpn you are using.

Any known issues with Essbase 64 bit and other components as 32 bit

Hi Everyone,
Are there any known issues with 64 bit Essbase and other components (Planning, EAS, Provider services, EAS, Workspace and Reporting) in 32 bit?
Version is EPM 11.1.1.3
The reason for choosing ESSBASE 64 bit is of course performance. We decided to stick to 32 bit for the web applications due to some known issues and bitter experiences in past in this version with 64 bit web deployments.
OS is Windows 2003 Server (64 bit for the ESSBASE server and 32/64 bit for the application server)
Thanks,
Sayantan

Hyperion 32-bit Web Apps are fully compatible with Essbase 64-bit. Same with 32-bit Essbase client.

Why I had no problems with the VZW employees and other people have?

I think that most people who cannot resolve problems with the VZW have an attitude problem.
Wise saying: you can get more with honey than with vinegar.
Since I “upgraded” my old Samsung Sway to a new Samsung Intensity III, in the past three weeks I spent many hours dealing with the VZW store employees, customer service reps, and tech support people. The phone was replaced two times, and I had no problem getting the replacements.
The third phone did not working how I expected.
Today I called VZW customer service and said I don’t need anymore trouble shooting and I wanted find a resolution, which will be satisfactory to both of us. After a short conversation with a customer service rep, I was connected with a tech support. I told him that I don’t need any more trouble shooting on the Samsung Intensity III because I already spent HOURS doing that on three devices.
We spoke about what the VZW could offer me, about replacements with different phones, etc. Our conversation ended with me offering the resolution that could satisfy me, which was to keep this phone and my account will be credited for the $30.00 “upgrade” fee and I will buy Samsung Sway on eBay. NO PROBLEM.
My account was credited and I was advise about the ESN number and activation.
Why I had no problems with the VZW employees and other people have? The answer is simple. I did not have attitude when I was spoke to them.
So if you want the problem to be resolved, put your anger in you pocket before you start the conversation. You can say that you are angry, frustrated, etc like I did, but add that you understand that this is not their fault that the manufactures makes a crap phones.

Yes, you are right. I lost my upgrade. Also, it’s true that I could buy the phone on eBay… if I knew then what I know now. In the past, I never had problem with any of my phones. Doing an upgrade with the VZW was a normal thing for me. I didn’t expect that Samsung Intensity III would be a junk phone. My last upgrade was 4 years ago. I had $50.00 ‘new every two’ credit on my account, which was used for an upgrade. I lost the $50.00 credit paying for Samsung Intensity III. Sometimes we learn from our mistakes or from a bad experience. Three weeks ago I did not know that I could buy a phone on eBay and activate with VZW without paying $30.00.
Samsung Sway is coming from …eBay – keep your fingers crossed for me.

Is there are BUGs? (Grid with single column and dynamical alert's thresholds)


1. When i'm using a grid with a single column of data the high of ALL grid's cells is determinated by the smallest element. That's why if there is an empty cell in data column EVERY grid cell will be shown in Flash with the minimal high. Only workaround i could find was not to have any empty cell in my grids. Screenshots are attached. (By the way the workplace view of grid and results in flash file are extremely different by high). For my it looks like a BUG. :o)


<img src="/files/GridWorkPlace.jpg" width="96" height="473" />


2. It is possible to make a reference to cell range if you want to define alerts thresholds. But if you dynamicaly change the values in this range - this changes have no efect on relevant alert indication. Was it supposed not to implement any possibility to change alerts thresholds dynamicaly? Do you now any workaround to use different alerts treshold values with single element?


<img src="/files/GridFlash.jpg" width="88" height="442" />


It was possible to attach files to my post, but i can not see them now. :o(((

Apply multiple effects to multiple objects with single click box

I would like to click on a click box and have one object appear and another object disappear. I guess what I'd like to do is apply effects to multiple objects with a single click box. Is that possible?
Thank you.

Welcome to our community
Sure it can be done but you won't use effects to do it.
When you insert an object in Captivate, you have an option to enable or disable Visibility. You also have an option to name the object. So you would give the object a meaningful name and clear the Visibility option to "hide" it until needed.
Then you would create an Advanced Action that would hide some objects and show others.
After that, you would assign the Advanced Action to a Click Box or a Button or some other event.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Multiple rows with single date

I am using a CDC control task to extract and load data from our OLTP source to our Data Warehouse.
For our Date dimension, we have a DateKey which is a
DATETIME stamp (created using SSAS dimension wizard). Time is always 00:00:00 as a DATETIME
value is required for populating the dates.
Our fact table destination uses this DateKey as a FK.
Our fact table OLTP data source contains multiple records with a single DATE and TIME field. This fine as I can convert the DATE field to a DATETIME using a derived column.
However, as our Date dimension has granularity of a day, all we require for our fact table is the most recent daily record from our OLTP data source.
At present, the data flow task is attempting to write all records and failing on PK constraint.
How would I go about traversing all records for each date and loading only the most recent for that day? Is there a better way to go about this?

If you wish to get only one record for today, you can simply use in your source query:
SELECT TOP 1 ... FROM OLTPdata ORDER BY DEATETIMEcolumn DESC
if you need one record for each date, you may use ranking functions:
WITH Q AS (
SELECT
ROW_NUMBER() OVER (PARTITION BY CAST(DateTimeColumn AS DATE) ORDER BY DateTimeColumn DESC, some tie breaker column) AS ROWNUM,
FROM OLTPData
SELECT * FROM Q WHERE ROWNUM=1

Multiple Price with Single Item

Dear All,
I work for Logistics company and they have implemented AR,AP,GL,OM,Purchasing...running smoothly.
Now,they want to create multiple prices for single item,pls find below scenario ,
A) Business Process:
Generally, customer goods will be split and sent in different trains. Then, for same destination & quantity we will get different amount.
Note: Calculation done by Railways based on variable factors (like penalty charges for over weight or under weight).
So everyday, every bill have different amount for same quantity and destination will be computed and given by railways.
B) Current Process in Oracle:
End user will select item and enter manually.
C) Client Requirement:
Needs to create single item with multiple prices
Note: Item code and price list should be constant due to business requirement.
I just wondering,how financial company manage price fluactutations...
Kindly help me out to sort this issue pls.
Regards,
Kumar

Hi Anil/Amit,
O.K. accept that VK11 is for sales. But when I enter multiple records in VK11 it is getting saved. But same thing is not happening for MEK1. Is there any configuration need to change for the MEk1?
Please let me know is there any other way or tcode to save the condition with multiple values for single line items.
Regards,
Praveen,

BUGS: Multiple Undos with Single CMD-Z (and other buggy tales)

Similar Messages

Maybe you are looking for