Bugs on iPhone restore

Hi,
I did restore the iPhone software because my calendar events didn't notified me any longer. Hopefully that problem is gone.
But I've found another bug.
I told iTunes to use the backup after the software restore but several things aren't the way they were a few minutes before the restore.
I did a backup direct before the restore to make sure everything is covered. But it wasn't. For example: The mail-settings which let me decide where the mailboxes of my imap-accounts should be (local on device or on a server) were reseted. Also reseted were the notification settings for all my mailboxes.
I'm sure there are other settings affected, since this was the case with previous restores.
I've send an feedback to Apple and maybe this report here will help people with the same problem.
Please Apple fix the backup-restore function so every settings is included.
Regards
Tohu

The story continous.
There is an calender event which should notify me at 11am. My iPhone was locked. The display lights up and… nothing. No notification, no sound, no vibration. But the notification settings are set to do all this!

Similar Messages

  • My itunes is not letting me restore my ipod and my iphone i dont if that is a bug that itunes is having or its just my computer that is not letting my ipod and iphone restore. please itunes fix this i really need to store my ipod and updated to ios 6.1.2

    my itunes is not letting me restore my ipod and my iphone i dont if that is a bug that itunes is having or its just my computer that is not letting my ipod and iphone restore. please itunes fix this i really need to store my ipod and updated to ios 6.1.2

    Please post error(s) noticed in iTunes so that someone can help.

  • When I was talking on phone, suddenly the phone was switched off. i tried to switch it on but it gave the message....connect to itunes for set up.  when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it

    when I was talking on phone, suddenly the phone was switched off.
    i tried to switch it on but it gave the message....connect to itunes for set up.
    when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
    I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
    after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
    What to do now?????? Customer service people say..it is hardware problem

    If it's a hardware problem, then the phone will need to be replaced.
    There is no magic that can fix a hardware problem.

  • Itunes closed after iphone restore and now wont open..what to do???

    i was having some problems out of my iphone and had no choice but to do a "system restore" on my iphone 3G. As soon as the restore was done itunes closed and now it will not open. i have tried shuttin down and restarting my computer. I dont want to uninstall itunes because when my iphone restored it erased everything out of my phone and i need to put contacts pictures etc. back onto my phone because thats where i backed it up at!!! someone please help me!!! what do i do?!
    running windows vista

    anwgymnast wrote:
    i need help can someone help me as soon as possible!!!!!
    Device Not Recognised
    http://support.apple.com/kb/TS1538
    Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • Nasty HTML / Outlook 2007 Bug in iPhone 2.0?

    Anyone else notice a nasty HTML / Outlook 2007 bug with iPhone 2.0? I've pasted the bug that I submitted to Apple below. So far I've gotten no response. =(
    Summary:
    I have found a major bug with sending and receiving HTML emails between iPhone 2.0 and Outlook 2007. When you reply to any email that comes from Outlook 2007 that reply will include broken HTML tags as part of the message. As a result, with each additional reply the message will double in size. It appears these additional replies hit the broken HTML tag and then insert another entire copy of the email. This happens with each and every reply, until after four or five when the phone can no longer deal with the message due to size.
    Steps to Reproduce:
    Send an email with HTML formatting to yourself using Outlook 2007.
    Reply to the message from the iPhone. The first reply will be fine.
    Reply using Outlook 2007 (make sure the formatting is still HTML).
    Reply to the message from the iPhone. This reply will include broken HTML tags, and begin the repeat copies inside the email.
    Expected Results:
    No formatting issues on replies, no repeat copies of the email inside each reply causing unusable message size growth.
    Actual Results:
    Broken HTML tags appear in the replies and cause the message to double in size with each reply. An example of some of the tags that show up are things like:
    color:#1F497D">
    or
    font-family:"Tahoma","sans-serif";font-weight:bold">
    They do not have the starting "<", which appears to be the root of the issue. These tags will show up near special HTML formatting, such as links or font changes.
    Regression:
    The problem always happens on iPhone 2.0 when an HTML formatted reply Outlook 2007 is part of the email chain. This appears to happen with all types of accounts.
    Notes:
    I'm assuming that with as many people that use Outlook 2007 I'm not the only person to report this. Our company uses Outlook 2007 as a standard deployment and this bug alone is making us unable to deploy iPhones to employees. I'm really hoping that a fix is already in the works and will be in the next update of 2.0!
    Thanks.

    eric9603,
    Have you been able to reproduce this with emails back and forth with any other Mail client besides Outlook that composes in HTML?
    Outlook 2007 does not use a browser based HTML generator or renderer. It uses Word's HTML engine for both generating and rendering HTML messages.
    Thank you,
    Nathan C.

  • HT203167 Lost App after iPhone restore. Who do I get the app back?

    I bought iNet - Network Scanner and after a iPhone restore I can only get the free version back on my phone.
    How do I download the app I have already paid for? Should I lose an app because I need to restore I don't think so, this is completely wrong.  I paid for this app and would like to be using it still.  I have always backed up me iPhone and also restored it and still don't have the full functioanlity of this app, there maybe others.  If I have to pay for it again then these companies are getting money for nothing which is the same as stealing from there own customers.
    If anyone has any idea how to download this I would like to hear about it.  I have of course tried using the Purchased link in iTunes Store but this doesn't help.

    " Should I lose an app because I need to restore I don't think so,"
    It has always been very basic to ALWAYS backup your content.  Did you fail to do the basics and backup your purchases.
    You can redownload apps, if they are still available in the app store: See this:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT201263 Hi my iphone 5 is on recovery mode and I connect it with the computer but it's failing to restore the device the message is showing iphone restore failed!!!!!

    Hi my iphone 5 is on recovery mode and I connect it with the computer but it's failing to restore the device the message is showing iphone restore failed!!!!!

    Hi Bobi1346,
    Thank you for visiting Apple Support Communities and for including the error number you are getting.
    There's an article for troubleshooting that error.
    iOS: Restore errors 4005, 4013, and 4014
    Try these steps to resolve the issue:
    Install the latest version of iTunes.
    Restart your computer.
    Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
    Learn more about updating OS X.
    Learn more about updating Windows.
    Restore using another USB cable.
    Restore your device on another computer.
    If you continue to see error 4005, 4013, or 4014 when you restore your device, contact Apple for support.
    Take care,
    Nubz

  • Restored iPhone using find my iPhone restore

    Hello,
    I recently restored my iPhone using find my iPhone restore and when I did this an apple loading screen came on and then the reboot logo that spins around replaced that. That logo has been spinning for a good three hours and when I try going into recovery mode it repeats the process by instantly turning back on with the rebooter.
    Please help,
    will41100

    Hello there, will41100.
    The following Knowledge Base article provides some great steps to try for troubleshooting your issue:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How can i resolve the -1 error occuring during the iphone restoring process.

    how can i resolve the -1 error occuring during the iphone restoring process.

    hi ive also got the same probblem ive had it working last night but then after 2 hours of working it decided to put the phone back into recovery mode plus its an unknow error (36) Ive tried to connect to i tunes and it started to recovery and wipe the to put it back into factory settings then came up with the error 36  can any one help

  • I cannot select the last iPhone backup for a new iPhone restore

    why
    i cannot select the last iPhone backup for a new iPhone restore?

    Hey quarterback45,
    Thanks for the question. This usually occurs when your new iPhone is on a earlier iOS version than that of which the backup was created with:
    iOS: Unable to restore from backup of a newer device
    http://support.apple.com/kb/TS3682
    Thanks,
    Matt M.

  • IPhone Restore Failed

    I recently had a problem with my iPhone, so I took it in to Apple and they replaced it with a new phone. I brought the phone home and tried to restore it to my last back up. About a minute into the restoring process, a message pops up on my iPhone that says "There was a problem during restore." Then it tells me to restart the phone and try to restore it again. Then I get a message on the computer saying the phone was disconnected during the restore process.
    I've tried this process 4 or 5 times now and I keep getting the same message. Does anyone have any suggestions as to what I can do to restore my phone?
    Also, I saw a video on youtube that said you could fix this problem by opening the hosts file in finder and deleting the gs.apple lines. The only problem is when I opened the hosts file there were no gs.apple lines.

    Exactly the same problem for me - except mine is the same phone, not a new phone.
    I had to wipe my iPhone clean and so later tried to restore it, opting to restore from previous backup. During the restore of previous backup data I get the message on my iPhone "Restore Failed. There was a problem during restore. Please restart your iPhone and try restoring again."
    No matter how many times I perform the restore, I get the same message. There is NO error number, and there is NO error in iTunes - only on the iPhone screen. I too have no gs.apple.com entries in the hosts file on my Mac.
    I have restored the iPhone backup file itself from several different points in time from my TimeMachine backups, but all of them produce the same result.
    C.

  • My iphone has been in verifying iphone restore for over 3 hrs please help

    my iphone 4s was getting the 3194 error message and then the 2005 error message i used tinyumbrella to get it to finally go into restore mode but its been 3 hrs for 3 hrs its been stuck on verifying iphone restore for 3 hrs? what should i do, leave it overnight or disconnect it and try to start over please only reply if this has happened to you and you have successfully restored your iphone thank you

    thank you for that ...my phone was already in DFU mode and thats why i was trying to restore it, it wouldnt restore it just kept saying verifying iphone restore and finally after 3 hrs of researching posting posts and reading posts i called apple and bought extended warranty for apple care for 70.00 and he helped me fix my phone over the phone safely and i didnt have to worry about wrecking my phone or making it worse, it was the best 70 i ever spent because i have been trying since last night to fix it i spent hours all day today and no one could help me

  • I need to run an iphone restore from itunes but i don't remember the backup password. any thoughts/help/suggestions?

    i need to run an iphone restore from itunes but i don't remember the backup password. any thoughts/help/suggestions?

    Try entering the password on your iPhone

  • What to do if when trying to sync iPhone to computer you get the message "itunes cant read content of iphone. restore to factory condition"?

    what to do if when trying to sync iphone to computer the message appears "itunes cant read content of iphone. restore to factory condition"?

    If you're receiving that message, you data are already gone.  If you've been using iCloud and backing up your phone as recommended, you should have no data loss.  If you have not, well, hard lesson learned.  Good luck.

  • TS3694 ?? I have Iphone 3G , when i update software & during iphone restore software 3.1.2. i got error 1602. how i can solve it

    ?? I have Iphone 3G , when i update software & during iphone restore software 3.1.2. i got error 1602. how i can solve it ?

    http://support.apple.com/kb/TS3694#USB

Maybe you are looking for

  • Should I upgrade my 2008 iMac from 10.6 to 10.7 or 10.8?

    I'm wondering (a) should I upgrade at all and what to and (b) if I do can I go back to 10.6 somehow? (a) I would like to have increased connectivity between my iMac and iOS devices via iCloud, and I like the new Mail app in Lion/ML. Anyone got experi

  • How to use Jdeveloper 10g (10.1.3.4.0) or 11g to create J2ME apps?

    I can't find any tutorials or documentation in how to do this in the current version of Jdeveloper 10g or 11g. All I could find was the Jdeveloper Wireless Extension 9.0.5 but this doesn't work in either versions. Also I don't want to do browser apps

  • Does anyone have the Moto G?

    I have has the Moto G for about a week. Today I started getting a message across my top bar that said my message was not sent. So i went to my messages & everything was sent. I then cleared the message on the top bar...I then went to my messages only

  • How to open movie made in 8.0 in 6.0?

    so, i've made a movie in imovie 8.0. only thing is there are no effects in 8.0, so after reading posts on this message board, i tried to open it up in version 6.0, which still has all of the effect capabilities. But my movie is grayed out! Won't open

  • Display Personal Information

    Dear experts, I have a requirement of displaying of personal information (IT 0002) of an employee in ESS. When I click on personal data in ESS, Its giving me an option to edit his Name and other personal informations, Which I would like to restrict.