Bugs running Final Cut 7 on Lion (10.7.1)

Just did a clean install of Lion (from scratch) and FCP7 on my MacBook Pro i7. After just one project, the experience is not all that great.
The main problem is that my external monitor, which I use for preview, will freeze after 10/20 minutes of use. Refreshing A/V devices doesn't seem to affect, and the only way to get the picture back (until it freezes again) is by rebooting FCP, or turning VIEW/EXTERNAL VIDEO off.
I have updated to 10.7.1 hoping that this would fix the issue, since this update addresses a similar problem for iMacs, but everything remains the same. I have also changed the energy saving settings so the computer doesn't switch between GPUs, but that didn't do it either.
Another little annoying thing I have noticed. No matter what drive I set as my scratch disk, Final Cut will always create a second set of folders inside the user's documents folder.
It has just been one project, but my settings have been the same that I have used regularly in this same system for a number of years (ProRes HQ), and never came across any of the above.
Am I the only one with this problems?
Thanks!
V.-

So they do. But these are the same people that released FCP-X as an "upgrade" to FCP 7 ... and you see how true that was. Can you really trust Apple at all? Or have they become the company that will tell you anything to get you to purchase their products? Or maybe it's just that they fired so many of the proapps team that those left just don't know what they're doing.
-DH

Similar Messages

Can I run Final Cut Pro 7 with Mountain Lion?

I just bought a new Mac mini equipped with Mountain Lion, and discovered that it won't run Final Cut Express, so I wonder if FCP-7 works. I know it well, and am not eager to learn a whole new system with FCP-X.

The answer is generally yes, but here is a thread that dives deep into ithe question and which you might want to read.
Good luck.
Russ

I'm running Final Cut Express 2. How can I move entire project and application from one internal hard drive to another? Ran out of space on one drive. Thanks.

I'm running Final Cut Express 2. My video project is 95% done and I've run out of space on my 500g internal hard drive. How can I (1) move the complete FCE program and video to my unused 250g internal hard drive and operate it from there and (2) how do I then purge all the FCE info from the 500g drive without losing anything from the 250 drive?
Also, is it possible to change the aspect ratio from 4:3 to 16:9 when the project is finished? If so, how? I now know this all should have been done before I started. Thanks for the help.

1. You can't move the application. It must remain on the system drive. Move your capture scratch folder to the external FireWire drive and use the reconnect function in the project.
2. What's the media 16:9 or 4:3?

I want to purchase a powerbook that will run a music program like MOTU or Pro Tools as well as run Final Cut Pro without being sluggish...any help?

I want to purchase a powerbook that will run a music program like MOTU or Pro Tools as well as run Final Cut Pro without being sluggish...any help?

The only way that would work out is if you ran exactly the versions that were made for old PowerBooks. Anything newer may require Intel and not run, or will strain the poor old G4 CPU.
Your needs have to be modest, too, because the problem with older music and video software is that they are not current as far as formats and codecs for the Web. If you want to output H.264, the current standard for YouTube/Flash video, older software may not support it, and in addition, H.264 is processor-intensive and is tailor-made for today's multi-core, 2+ GHz processors. It will overwhelm a G4. A PowerBook G4 can barely play YouTube videos.
More perspective: The PowerBooks worked great for miniDV format editing. In other words, 480i SD/standard definition video in use from the late 1990s to the late 2000s. If that is all you want to do, edit tape from an old miniDV camera to SD output, then OK.
But if you want to edit today's HD video, whether 720p from a snapshot camera/iPhone 4 or 1080p from a DSLR, the PowerBook and the software for it will either not recognize AVCHD/H.264, or it will slow the PowerBook to a dead crawl.
I'm in agreement with the above: Intel Macs have been out for so many years that getting a used one is a much better deal than a dead-end PowerBook. And I loved (still love) my PowerBooks.

Preparing my MBP to run Final Cut Pro

Hello,
Apologies if this question has been answered, I've searched for over an hour but can't find what I'm specifically looking for.
I would like to know what I need to upgrade / increase / expand on my MBP, in order to run Final Cut Pro and work with XDCAM and HDV source material.
Currently:
2.4Ghz Intel Core 2 Duo.
2 Gb 667 Mhz DDR2 SDRAM
NVIDIA GeForce 8600M GT, 256 Mb VRAM
From my research I think that I at least need to increase the RAM and get a big external hard disk to store the material.
Is there anything else I need to do?
I expect many people will say, buy a Mac Pro but we just don't have the budget! If it takes a long time to render then we just have to live with that.
Any advice much appreciated.

As for DIY I can not give you advise, I live in Europe but buying ram at the Apple store is maybe not the budget way.
I usually look here to install things yourself
http://eshop.macsales.com/tech_center/installation.cfm
There are for sure other/better sites but with the MBP installing extra ram is easy,
A 1TB will be more then enough, I would go myself for 2x500 GB firewire, this gives the option that when a job is finished and you don't need the media anymore you can sweep one of the drives completely.
Just my 2 cents

Will iMac G5 2.1 run Final Cut Pro 4.0.1

Tried to install and run Final Cut Pro 4.0.1 on my iMac G5 2.1ghz and it installed but would not run. I did get a message that read that some software or hardware was needed (AGB Graphics Card was listed in red) but I would think that the iMac had everything it needed. If you know if 4.0.1 should run or if the newer 5.0 will run on a std. off the shelf G5 iMac, please let me know?
Much Thanks
Greg J

Final Cut Studio will run on your iMac.
If he has the 1st gen iMac G5, it should run. If he has the ALS or the iSight, it won't.
He has the 2.1 GHz, so he should have the 1st gen, yes?
"Final Cut Pro 4 through Final Cut Pro HD 4.5 require a computer with an AGP video card for installation. PowerMac G5 (Late 2005) models (released October 19, 2005) and iMac G5 (iSight) models feature newer PCI Express video cards. Because of this, you can't install Final Cut Pro 4.x on these computers. Final Cut Pro 4.x is not supported on these computers."

Final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support. Have tried reinstalling

final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support, paralyzed. Have tried reinstalling, default settings etc
Appreciate suggestion, working on deadline. Thanks.

Here is the start of the crash report:
Process:         Final Cut Pro [20568]
Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier:      com.apple.FinalCut
Version:         10.0.1 (185673)
Build Info:      ProEditor-185670300~1
App Item ID:     424389933
App External ID: 4138831
Code Type:       X86-64 (Native)
Parent Process: launchd [102]
Date/Time:       2011-11-11 20:41:32.201 -0800
OS Version:      Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report:          192058 sec
Crashes Since Last Report:           14
Per-App Interval Since Last Report: 157161 sec
Per-App Crashes Since Last Report:   14
Anonymous UUID:                      DD542B2F-58A0-482E-AAFA-ECADEC76F562
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000280000003
VM Regions Near 0x280000003:
    CG shared images       00000001cbf62000-00000001cc182000 [ 2176K] r--/r-- SM=SHM
-->
    STACK GUARD            00007fff5bc00000-00007fff5f400000 [ 56.0M] ---/rwx SM=NUL stack guard for thread 0
Application Specific Information:
objc[20568]: garbage collection is OFF

I have three Imacs running Final Cut X but only able to update to 10.0.7 on one of them. Everytime I try to update it ask for my apple ID which I submit...then get the same replay to enter my Apple Id have only been able to update one of them to latest

I have three Imacs running Final Cut X but only able to update to 10.0.7 on one of them. Everytime I try to update it ask for my apple ID which I submit...then I get the same message to enter my Apple ID...Any suggestions?

Easiest thing to do is put the app on the non updated computers in the trash and then copy the new app on to a flash drive and copy into the app folders on the other two computters.

What's the best Mac for running Final Cut Pro X?

Title says it all. What's the best Mac for running Final Cut Pro X? I'm not looking to make a feature length hollywood film. But I'd like to be able to edit video without lag.

Yes. Begin with the fastest processor / graphics card / and as much RAM as you can afford. (As all three will become obsolete over time.)
I started from scratch. I have a 27-inch iMac with a 3.4 G Intel Core i7. (currently the fastest processor for an iMac) I also ordered the best graphics card--AMD Ratheon HD. I ordered 16G of RAM, but recently added more RAM to equal 24G. (OWC makes good after-market RAM for iMACs.)
Last, I ordered a flash drive / SATA hard drive combo. (250G on flash / ITB on SATA). The OS and all of my applications run off the flash drive. (for fast start up!)
I put all of my media and FCP projects onto the SATA hard drive.
Now, I had the option to order a 2TB SATA. But, I realized I can always buy more external storage as I edit more and more projects. ALSO! FCPX is GREAT when it comes to editing projects on external drives! I can segregate an entire project and its media files onto a removeable drive. I simply launch FCPX, plug in the drive and--poof!--I'm ready to edit. It sees the project and the media right away. When I'm done editing, I can then send this drive to another editor (also using FCPX) or attach it to my MacBook if I want to edit the same project in the field.
This has worked for me. I wish you luck.

Running Final Cut Express on an XP

Is it possible to run Final Cut Express HD on a XP system?? I'm not sure.

no, FCE is MacOs only.

What kind of graphics card should i get to run final cut pro x on my 2008 mac pro?

What kind of graphics card should i get to run final cut pro x on my 2008 mac pro?

Hello Andres. I own an Early Mac Pro 2008, and have had the blessing of using both FCP X & Motion 5 for some time now. This is a pritty open question and it depends on your usage and the throughput nessesary to handle your work load. I can share what my set up is, & it may help you deside if this is enough power for you or help you move in another direction. Keep in mind that the buss speed and cpu are a big part of helping FCP X more so than the video card, although the video card does come into play here as well. Now if you are wanting to run Motion 5 as well, the video card is Almost Everything, and you need the biggest and best situation here that the throughput on this system will except. I'm running 14 gig of system ram, and the video card is an ATI Radeon 5870. For FCP X, running 1920x1280p footage optimised in pro-res 422, she can move along with some render time nessesary when dropping on the timeline, also filters, transistions, titles ex, have a bit of a laps time to render, but then she runs ok. This wait is not as much of a challenge with this set up as with Motion. I need a much bigger gpu on the video card for this app. Not sure if this computers throughput is really worth the upgrade. Beleive this though, Motion is demanding on using ALL you can give it. It is a Genious App, and it also calls for ALL THE POWER YOU CAN GIVE HER IN A VIDEO CARD. Conclution: if you are just starting which it sounds like, even a smaller video card than this can work For FCP X. Make sure you have at least 8 gig of cpu ram. 12 or more will help here. Also make sure the card is OpenCL compadible.....& this is in the thread above,,,,,,,,

Are there bugs between final cut express 2, and imovie?

i dont have the HD version of final cut express, just the original version. i imported some footage and exported as a H.264 high quality video, then put that to idvd...the final burned version looked like soo bad, it was like the horizonal lines of the video were blurred and studdering. i don't know. so i exported a full quality video and took it to imovie HD6 to do the H.264 compression, then took that to idvd and did a "best quality" burn and then the final output on the tv....looked like some frames were being skipped.....what the heck? Is this just a bug between final cut express 2.0 and idvd? maybe i should try capturing in imovie and sending that to idvd.....BUT I ALREADY EDITED IT! AHHHHHH

well i'm trying to save space on my HD, so i export to a H.264 file to keep on my drive, and when i need to make dvd's, i just compress the H.264 file, and it still looks awesome on a tv......it has worked a while ago, but all of a sudden it's giving me issues. i've tried every way
RAW to H.264 to imovie to idvd best quality to dvd....BAD
RAW to RAW to imovie to idvd best performance to dvd...BAD
RAW to H.264 to idvd best quality to dvd...BAD
RAW to imovie to H.264 to imovie to idvd to dvd...BAD
i just dont get it

Run Final Cut on Mac Mini

What is the editing experience running Final Cut on a Mac Mini. Which versions of Final Cut would be best suited to the newest Mini's.
Thanks

I do...well, my KIDS do. FCP 7 is the only one that will install and run problem free. Getting any previous version to even install is quite an undertaking.

Could I run Final Cut Pro 10.1.3 on Mavericks DP 2

Could I run Final Cut Pro 10.1.3 on Mavericks DP 2

Curiously, this picture I can see :-)
The dialog is quite normal. It just means what it says, namely, there is not enough extra media at the edges of the clips (so called "handles") to be used for the transition, so FCP X needs to shorten some of those clips to create the handles - thus the total length of your timeline will decrease.
But the fact that the transition appears as black in the browser, and that it is not applied, show that there is definitely something wrong.
Since these default transitions are installed as part of the application itself, I believe the best course of action is to delete FCP X (use FCS Remover to completely remove all traces of the application), and then install afresh from the purchases section of the App Store.

How works final cut studio with lion?

how works final cut studio with lion?

The thing to take from FCPX is that it isn't an update/upgrade from 7. It's an entirely new editor. As a professional video editor myself for 5 years, I felt just as hesitant as you when I first saw what Apple had done. However, I committed myself to biting the bullet for a little while to get comfortable with the new workflow, and I can vouch for Apple's new move toward this type of setup. It has improved my workflow enough to where I can confidently say I deliver projects, on average, in half the time, with no sacrifice to quality.
Give it another chance, if you can afford it. With a bit of training, and time into using it, you'll see it's a superior editor to FCP 7

Bugs running Final Cut 7 on Lion (10.7.1)

Similar Messages

Maybe you are looking for