Bugs with Linking and Audio Solo buttons

* Solo function doesn't work properly
Stereo audio pair on A7 & A8. Audio in viewer shows pan set to -1 for normal stereo. Solo button for A7 give you audio in the left channel. Solo button for A8 gives you NO AUDIO. This button should give you audio in the right channel and yet it doesn't.
* Can't relink multiple clips
Select a group of clips and use command+L to unlink them. You should be able to reverse this process and relink them all with the same operation but YOU CAN"T. NOW YOU HAVE TO RELINK EACH CLIP INDIVIDUALLY by laboriously selecting the video, then the audio, and then invoking command+L for every single clip. This is stupid and counter-intuitive.
Hello Apple???? Are you listening??????
Message was edited by: Dave Berges

Select a group of clips and use command+L to unlink them. You should be able to reverse this process and relink them all with the same operation but YOU CAN"T.
CMD-Z (undo) doesn't work?
Stereo audio pair on A7 & A8. Audio in viewer shows pan set to -1 for normal stereo. Solo button for A7 give you audio in the left channel. Solo button for A8 gives you NO AUDIO. This button should give you audio in the right channel and yet it doesn't.
Is this ONLY if the audio is on A7 and A8? Well, I tried that on my end and it worked, no matter WHAT tracks I were on. Try trashing preferences.
Shane

Similar Messages

Delete Attachment link and the launchWebdynpro button in the UWL iview

Hi,
Can anyone help me in deleting or hiding the Attachment link and the launchWebdynpro button in the UWL iview. I dont want to do it in the iview properties which would affect all the tasks. Is there a way I can do it in the backend.\
I appreciate the help.
Thanks

Hi Surjith,
I have the same problem. How can I remove the link? After I called the mentioned function module, the attachment was removed (content) but in the UWL the file name is still there:
From UWL:
myFile.pdf by WF-BATCH (94 kb)
myDeletedFile.pdf   <-- I removed this one with the function module
        CALL FUNCTION 'SAP_WAPI_ATTACHMENT_DELETE'
          EXPORTING
            workitem_id     = me->mv_wf_instance_id
            att_id          = ls_att_id
            delete_document = abap_true
          IMPORTING
            return_code     = lv_return.
Could you please help me?
Thanks,
Thomas

I open a new webpage in a new tab. I then go to a link and the back button does not allow me to go back to the original webpage. Any suggestions?

I open a new webpage in a new tab. I then go to a link and the back button does not allow me to go back to the original webpage. Any suggestions?

I don't think you understood the question. I am having the exact same issue. I open a link in a new tab or window, for example: https://addons.mozilla.org/firefox/addon/backforedrop/
When the new tab opens, I click on "reviews" to open the link: https://addons.mozilla.org/en-US/firefox/addon/backforedrop/#reviews in the existing tab because I want to see the reviews for this feature. After I read the reviews, I want to go back to the main link, but the back button on my browser is greyed out, as though I was never even on the previous page. So my options are 1) Open every link I ever click on in a new tab or window, or 2) Hope the website is user friendly and attempt to navigate back to the previous page using links inserted on the current page.
You never realize how frustrating not having back button is until it happens.

Problems with image and audio in Premiere

Hi! I'm using Premiere Elements 9, but there's no synchronization with imagen and audio because the image is slower than audio and it's causing problems when I'm editing. Why can I do? It's there a poblem that can I fix in "Preferences" or is my laptop?
I hope your answer,

When you do post the PrE forum, this ARTICLE will give you tips on the types of info, that will be so useful. See you there!
Good luck,
Hunt

Can someone please help, I have a dvd disk containing lecture videos, on a Windows pc it works fine, and the disk opens to the dvd menu. However on my macbook pro running Mountain Lion, it opens as a data disk, with video and audio in two seprate files??

Can someone please help, I have a dvd disk containing lecture videos, on a Windows pc it works fine, and the disk opens to the dvd menu. However on my macbook pro running Mountain Lion, it opens as a data disk, with video and audio in two seprate files??

You may need a 3rd party application to view the DVD in a wWindows format such as
http://flip4mac-3.en.softonic.com/mac
https://www.macupdate.com/app/iphone/5758/vlc-media-player

TS3623 I rented a movie and can watch preview perfectly with video and audio feed as signal strength is at top when I checked. However, when I purchased rental video is fine , but I get scratched sound for audio. Any thoughts to fix?

I rented a movie and can watch preview perfectly with video and audio feed as signal strength is at highest when I checked. However, when I purchased rental video is fine , but I get scratched sound for audio. Any thoughts to fix? I rented movie within week and it worked. All previews of movies and show also works.

I have a suspicion that the problem is not in the recording device itelf, but rather in the playback-software, which is struggling with an unfamiliar audio format/codec/whatever-it's-called... I opened the file in QuickTime Player 7 (7.6.6) and selected "Show Movie Properties" and it says:
"Video Track: H.264
Sound Track: Integer (Little Endian)"
All current Mac systems support Integer (both Big and Little Endian) audio natively. The fact you can hear anything at all proves that the audio is playing back. The most likely problem would be a malfunction associated with the mic pickup.

I purchased 2 weeks before i phone 5 but there is problem with sleep and wake up button its not responding can anyone help me in this issue.

i purchased 2 weeks before i phone 5 but there is problem with sleep and wake up button its not responding can anyone help me in this issue.

You have a one-year hardware warranty & 90 days of free phone support. Take advantage of it, make an appointment at an Apple store or call AppleCare.

Anyone know of dock for itouch 4 with charging and audio out

Anyone know of a decent simple dock for itouch4 with charging and audio out? Searched a bit but can't see one. My old Belkin dock connects audio with adaptors out but no charge.

I know what you mean. I would love to see Google offer the (email pic from mobile) to post like other sites (FLICKER, FACEBOOK, etc) offer. I did sign up for Facebook just to try it out. Worked great, but I really don't care for Facebook itself (or any social sites like it). Would rather just stick with Google's photo albums (also like their iPhone interface into it). All they need is the ability to upload via mobile and I would for sure use them only.

X220 connection to older tv with video and audio inputs

I want to connect to tv with video and audio inputs , I think it is rca style. what adapters do I need to connect my x220. Thanks

so you are using s-video or RCA connection right?
If you using analogue connection like s-video and RCA, it is best to get a VGA to RCA/S-video adapter for the video to the TV. For the audio get a 3.5 mm headphone jack to rca adapter plug.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Having problems with Video and Audio

Hi - I am new to Captivate. I have created a demostration with about 85 slides with audio on each slide. When I preview the project all is fine. When I publish the swf and htm and play on my machine all is fine. However when my colleagues try and listen to the demo, the video and audio get out of sync. The audio seems to go faster than the video. I am not sure if it is due to the sound speeding up or the video slowing down. Has anybody seen this bfore ? Can anybody help ? I am using Captivate 4 with the latest patch

Hi there
I've seen others suggest that adjusting the audio clips for each slide so they begin playing at perhaps .1 or .2 seconds after the slide begins solves the issue.
Perhaps you will have good luck with this approach as well.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Captivate with Flash and Audio Problem

hi there,
I am having lot of flash files and all the audios inside the
flashfiles are "Event" Sync and not default "Streaming" which
brings out more problem like slow in clicking buttons and overall
project speed. but when i change it to Event it works fine at the
same time i cannot do any audio synching and other audio relatted
ewordl....
Please hlp me/...

I am having a similar problem where flash audio loops plays again on the slide after the one with the flash swf. Like it's replaying the sound twice, looping is not turned on... I've had multiple problems with flash and captivate like the new CS4 3d transitions just make it go balistic.

Compiler bug with generics and private inner classes

There appears to be a bug in the sun java compiler. This problem was reported against eclipse and the developers their concluded that it must be a problem with javac.
Idea also seems to compile the example below. I couldn't find a bug report in the sun bug database. Can somebody tell me if this is a bug in javac and if there is a bug report for it.
https://bugs.eclipse.org/bugs/show_bug.cgi?id=185422
public class Foo <T>{
private T myT;
public T getT() {
return myT;
public void setT(T aT) {
myT = aT;
public class Bar extends Foo<Bar.Baz> {
public static void main(String[] args) {
Bar myBar = new Bar();
myBar.setT(new Baz());
System.out.println(myBar.getT().toString());
private static class Baz {
@Override
public String toString() {
return "Baz";
Eclipse compiles and runs the code even though the Baz inner class is private.
javac reports:
Bar.java:1: Bar.Baz has private access in Bar
public class Bar extends Foo<Bar.Baz>
^
1 error

As I said in my original post its not just eclipse that thinks the code snippet is compilable. IntelliJ Idea also parses it without complaining. I haven't looked at the java language spec but intuitively I see no reason why the code should not compile. I don't think eclipse submitting bug reports to sun has anything to do with courage. I would guess they just couldn't be bothered.

Working with Video and Audio...Please help (i am not a coder!)

Hey all. I am currently working on a project in Flash (CS3
action 2.0)
It is an animation and it includes a layer mask of a TV
screen, which shows a precut quicktime movie on the screen.
I am working with multiple scenes (11 to be exact) they are
all my different cut points.
The animation consists of 1st scene- VO (voice over) and BG
SFX. When I hit Apple+Enter this part plays sync'd up correctly.
However as the scenes progress on the sound gets out of whack.
Scene 2 consists of the quicktime movie (Video and Audio)
mask playing on the screen. All sound heard is a part of the .mov.
For this one the timing is also good.
Here is where it gets fluky. The next scene consists of a VO
and BG SFX. (and only those things) However, at this point of the
movie i hear the sound of the next .mov i have embedded in the file
(from scene 3). This is all happening well before that scene even
shows up in the preview.
I hope i explained it as clearly as possible. Anyone have any
ideas?! I would greatly appreciate it!
btw- i have set the frame rate to 29fps to match that of the
quicktime movies that are embedded.

Hi Brian, I don't mean to nit-pick but this is an
actionscript 3 forum, so you'd probably have better luck with the
general forum for non-AS3 questions.
There could be a couple of things that are causing a problem,
its hard to say without actually having your project on hand.
It almost sounds like your movie is taking longer to load, if
thats the case you could simply start the audio a little later in
the time line to sync it up.
I know you don't want coding solutions but you can probably
have flash "wait" for the movie to begin playing, and have that act
as the starting point for the audio.

Connecting a Satellite A200 to a TV with video and audio.

I have a Satellite A200 and was wondering what cables will connect it to my TV with both Video and Audio. I have an S-Video cable at the moment but I need the sound out of the TV.
Thanks.

The problem is that s-video cable doesnt transmit the audio signal but only video.
If you want to get the sound on TV you will have to use an additional RCA cable.
http://en.wikipedia.org/wiki/RCA_connector
Best regards

Problems With Syncing and Audio Play with Itunes

I've been having a problem with Itunes and my iPhone for the past few days. First of all, iTunes will not play any songs. When I press the play button, the speaker changes to the play picture, and the song loads at the top, but the timer stays stuck on zero. Also, when I attempt to sync my iPhone it will not add new songs downloaded onto my phone. I have updated and re-installed iTunes and it has not helped. Also, tonight I even updated my phone settings (which I interestingly enough was able to do despite the fact that I cant get a song to transfer to my iPhone, yet somehow the new program settings were able to make the jump.)
I am using Windows Vista at the moment. Does anyone have any idea as to what could be going on? Any help would be greatly appreciated.

Hi,
Have you tried backing up you iPhone and copying over everything to iTunes etc.Apps,Videos...Then Restoring to factory setting?
If that doesn't work try Manually Managing you Music and Videos.

Bugs with Linking and Audio Solo buttons

Similar Messages

Maybe you are looking for