Build 711 client issues with XGL?

Are there any known issues with installing the latest build of the 1.2
beta client (711) on the released version of SLED if XGL is enabled?
After installing the client and restarting, I got a message that my
display couldn't initialize (or something like that, it's the standard
error when X doesn't start) and it asked if I want to look at the X server
log. I said no, did the --disable-xgl, and now X came up ok. I then
reenabled XGL using the desktop effects, and 3D is working again even
after a restart.
Just wondering if the install of the client temporarily breaks XGL & X
necessitating disabling and reenabling XGL.
Joe

On Thu, 20 Jul 2006 16:28:17 +0000, linuxjoe wrote:
> Not that I know of. I have it running on my laptop with xgl and the 711
> client and it is running just fine. Typically when I see the error that you
> are running into, it is because I have done an init 3 and init 5 from the
> CNTL ALT F2 tty and still have the display running on CNTL ALT F7.
I hadn't changed my runlevel at all. Simply installed the Novell Client
and rebooted. I could see I was in runlevel 5, but with no GUI since X
couldn't start. Ran the XGL disable thing, typed startx, and now the GUI
came up. Within there use desktop effects to reenable 3D effects (all
still in runlevel 5 and having never switched to any alternate terminal
screen), log off, and now it was working. Might have just been an
isolated incident.
Joe

Similar Messages

Bought CS Extension Builder 2 - having issues with username/password

I recently purchased a monthly subscription to Adobe CS Extension Builder 2.0 (see below) after my trial version expired. I am using it with Flash Builder 4.6 and SDK 4.6. When I installed the retail version of CS Extension Builder 2.0, and created a new Extension Builder project (or used an old one), it gave me the following error: "Please log in with your Adobe ID to use Adobe Creative Suite Extension Builder". I don't see a place where you can log into Adobe or input a password. I looked online and found this forum message: http://forums.adobe.com/message/4793080#4793080, which indicated that there was an issue with the retail version and a fix was soon to follow. I tried to use the software update feature in Flash Builder, but it did not help. Will you please provide me with this fix or advise me on how I can continue to use CS Extension Builder 2.0?
Please help. Thank you.

Hi,
Do you have any of the Creative Suite products installed? If you have, a dialog should pop up where you can enter your Adobe ID.
Thanks,
Joe

AnyConnect SSL Client issue with Mac OS X

Hello this seems to be a very common issue with AnyConnect working on Mac OS X. A lot of random sites talk about this.
I have a Cisco 2801 running IOS 12.4(22)T (ADV ENT SRV) with AnyConnect 2.3 package installed.
From Windows I can connect without any issues.
From a Mac OS X after providing login credentials the AnyConnect log says its connecting... checking for updates... and then disconnects.
If this does work on Mac OS X what is needed (or needs to be configured) to get this to work properly on Mac OS X?
Thank you!

Hello All,
I recently experienced the same problem when my company upgraded to our entire company from the stone age to a VPN system using the Cisco AnyConnect. At first, I had the same problem as described above. Then my IT guy and I got on the phone with Cisco.
Here is the solution that worked for me. First, our IT department had to specifically load a MAC connection file into the VPN firewall to allow access for MacIntosh computers. Then I redownloaded the latest anyconnect files and updated whatever else through the vpn.yourcompany.com site. Finally, from www.citrix.com/download I downloaded (on the RH side under featured downloads) the appropriate Citrix ICA File.
Everything works fine now. I don't know if this will work for you, but it did the trick for us.

Image Ultra Builder 3.x issue with T61 Network Driver load

Hello,
I am having issues with a Network deployment of an image on a T61 (7659-12U) During the intial boot up phase with the Network Boot disk that was created from IUB, I receive and error 1231 - The Network Location cannot be reached.. I am currently using IUB for deployment of A31, T40/42 as well as the T60 model line. None of these loads are having the problem.
Any help on this would be very much appreciated.
Thank-you in advance.
Ed

Hi,
IUB 4.01 is using WINPE 2.0<Vista based> and IUB 3.1 was using WINPE 1.0/1.1<XP Based>.
This has nothing to do with the actual image deployment. It's just that the WINPE looks more like
Vista. And this is why the method changed after you updated from 3.0/3.1 to 4.00/4.01.
To answer your questions from before:
1) Does updating IUB to version 4.01 still allow me to deploy Windows XP ?
Yes, it's still supported and possible.
2) Where on the boot CD should the new driver files be located. I took this to be PREBOOT\DRIVERS ?
As the new IUB is using WINPE 2.0, the best location for the NIC drivers is the file :
tvtos\winpe.wim
However, this is my advice.!
For my Image deployment I'm no longer using the CD for network deployment. I'm using USB key which gives me more options for the image deployment and the automatization of the deployment process.
However, if you want to use CD for network deployment, then you can do it in following way.
!!!NOTE: this is not the offical way, nor the supported way, but trust me, that it's working like charm !!!
- go to your repository location %repositorylocation%\modules
- find the file called "Z633003A.TVT" and open it using your fav zip application
- after you open this file, go to following location: tvtos\
- extract the "winpe.wim" and using WAIK unmount this file and add the NIC drivers into this .wim file
- after all the drivers are in the winpe.wim file, just copy it back to the "Z633003A.TVT" file and create a new Deployment CD
How to add NIC driver using WAIK:
This is prety easy step, but for more info, check following link:
http://www.svrops.com/svrops/articles/winvistape2.htm
As I described earlier, I'm using USB key for Network image deployment, so I have not done it this way, but I have done it a bit simplier.
Here are my steps:
- created a Distribution USB key <suing the same method, that you are using when you create a Network deployment CD, but instead of a CD I select my USB key>
- once the USB key was created successfully I unmount the "tvtos\winpe.wim" file and add all the NIC dirvers into it
This is all that I have done.
Yes, of course there are couple other steps, that I do, like modifying the BCD file, adding other WINPE files, diagnostics and other deployment tools, however, this is not realy a part of IUB, I'm using it for my WDS server and other deployment tools, that I need to use. If you know, what I mean, then you surely understand, that it's a live safer to have everything on one USB key, then on multiple CD where I need to search throught all of then to find the correct CD.
Let me know, whether this method is more suitable for you.
As described above, this is not the realy official/supported way, but it's working for sure.
Rgrds

Lion Ichat client issues with logging into SL Ichat server

We run the iChat server on our OD master running 10.6.8. We have about 250 users and it's working great for everyone on Leopard or SL (the majority of our users).
We just started upgrading people to Lion, as well as getting some new lion machines. The people who are on Lion Pre-Configured machines seem ok, but the people who we upgrade are having issues with logging into it. Sometimes it will work just fine, and other times they just can't log in. They get the ~ symbol by their status and can't connect to the server.
The only fix seems to be trashing their prefs AND rebooting, just trashing them or just rebooting don't seem to be enough to fix this. Anyone seen or have a better fix for this? It has happened more than once for the same user.

Same problem here [https://discussions.apple.com/message/23114338#23114338].
Were you ever able to troubleshoot or fix this? File a bug report?

AJAX True Client issue with Load generator and BPM

Hi every one,
when i try to run Ajax True Client scrit from controller with Load Generator other than local machine,
it is failing with an error "cannot find usr file".
Root Cause:
this is because it is missing "webiendp.txt" file while copying the script to Load Generator machine. by placing this file manually in that location, its working fine.
But in case of BPM we cannot do like that. BPM always make a copy of the script and after execution it clean up the entire folder.
is there any settings to copy the entire folder to BPM/LG location, with out missing "webiendp.txt"?
thanks in advance.

This question seems like it's better suited to the [url http://forums.oracle.com/forums/forum.jspa?forumID=561]JRockit forum
John

Client issue with ALE Configurations

Hi Experts,
I am trying to connect to a different SAP System through ALE. I have defined logical systems. When i am trying to assign destination logical system to destination client, i am getting an error - "Entry already exists" as there is another system aready assigned with this same client number.
My Question is - Is there any way to connect to 2 Diff SAP systems having same client number? Otherwise, if there is a client (Say 400) that is already assigned to an SAP System, Then cannt we connect to another SAP system having the same client number( 400)?
Rgds,
SURYA.

No, SCC4 is only for defining the clients of current system (and the corresponding logical system, which must be unique throughout the landscape), it's not about communication at all (apart the logical system).
Use SM59 to define an RFC destination, you'll define the target host and client .
Use WE21 to create an RFC port, referring to the RFC destination above.
Use WE20 to assign this RFC port to the logical system.
By "distribute model", I don't know if you're talking about the "distribution model", in that case I recommend you to go though this thread where there are general information : Distribution model for Message control ?
Sandra

Autonomy Backup Client - issue with full backup but incrementals okay

We run Autonomy to back-up our Laptops across the enterprise .
I notice on one laptop here that the account within Autonomy Admin shows taht "Last known good full backup = Not applicable", but when you go into client history you can see that the incremental backups have been happening okay.
Should I be conerned? Is this backup file corrupt? If so, how please can I fix with minimal impact to the user.
Thanks

Ronnie73 wrote:
We run Autonomy to back-up our Laptops across the enterprise .
I notice on one laptop here that the account within Autonomy Admin shows taht "Last known good full backup = Not applicable", but when you go into client history you can see that the incremental backups have been happening okay.
Should I be conerned? Is this backup file corrupt? If so, how please can I fix with minimal impact to the user.
Thanks
For this unless this is a HP software product you need to contact the Software manufacture that you use for your backup for support on their software...
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Lync 2010 client issues with Exchange 2007/13 coexisting

Hi all,
Does anyone know of any update regarding the following link ??
http://silbers.net/blog/2013/12/19/lync-ews-broken-during-exchange-20132007-transition/
many thanks

Hi
I have Lync 2010 clients with Exchange 2013 Server, i came from 2007 as well.

NIS client issues with 10.4.x

Please, will some Apple tech please respond!
I have used NIS client on OS X for quite a while now, and recently bought more than 50 new iMacs for our school user environment. I rely on NIS to work, and it has in previous version of your OS. (Please don't tell me not to run NIS. I do not have time to set up OD right now, and too much of my network already relies on NIS.)
The current x86 10.4 release uses a non-linear startup process that causes certain network services not to come up in the right order, and thus rendering a system inoperable. This doesn't exhibit itself consistently, but once a system is on and operable, the problem will not occur, unless the system deep sleeps or is rebooted.
Help? Can I provide you with anything? Just ask. I will do the best I can. I want to continue loving Apple hardware...

Hi cmoredock;
On this forum you are not talking to Apple. You are talking to other users like yourself.
If you truly want to talk to Apple, you should try here.
Allan

Performance issues with the Vouchers index build in SES

Hi All,
We are currently performing an upgrade for: PS FSCM 9.1 to PS FSCM 9.2.
As a part of the upgrade, Client wants Oracle SES to be deployed for some modules including, Purchasing, Payables (Vouchers)
We are facing severe performance issues with the Vouchers index build. (Volume of data = approx. 8.5 million rows of data)
The index creation process runs for over 5 days.
Can you please share any information or issues that you may have faced on your project and how they were addressed?

Check the following logs for errors:
1. The message log from the process scheduler
2. search_server1-diagnostic.log in /search_server1/logs directory
If the build is getting stuck while crawling then we typically have to increase the Java Heap size for the Weblogic instance for SES>

Labview 2012 Installer builder issues with Windows 7 64 bit

I have a clients project application program I am working on and am having a lot of trouble getting installed applications to work on Windows 7 properly. The Labview Installer sets the default installation directory to "c:\Program Files\" on Windows Xp and on Windows 7 64bit this defaults to "C:\Program Files (x86). When I install the application on Windows 7 and run it, because Windows 7 64 bit unreasonably protects this directory and every folder under it, if you try to write file to any subdirectory under it (like a reports directory), windows 7 will not let the file write to the directory and the file(s) disappear and you get permission errors. This has been difficult to address. Even logging in as administrator, I have difficulty changing the folder permissions. In addition, when I am in the file write process, if the default directory is coded to come up in the file Open/Save dialog, will not properly
go to and display these protected directories. So thinking that OK, I'll just chage the install directory to something direct to the C: drive and not the Program Files (x86) directory, so I have better control of the folder permissions. Now the Installer build gives errors. It built, but the install fails. Looks like National did not test this for Windows 7 very well. I have run into just about every issue possible with Windows 7 and Labview. Clearly Labview was not very well tested with Windows 7 6 bit. I do not have the Internet toolkit added to the application, only the VISA 5.2 driver. Anyone else having application issues with Labview and Windows 7 and have ideas how to work around this??
Attachments:
BuildErrors.txt ‏11 KB

It's no NI's fault and has nothing to do with 64 Bit either. It is something MS changed starting with Vista, namely tightening security of the whole system to a similar level as was usual on more professional OSes like Unix 20 years earlier. A user has not rights anymore to write into the location where applications are installed. This is for one reason to protect installed applications from being modified by malicious code.
Instead every application should write its runtime data in one of the user writable loacations such as the user's Documents directory for data files, or in the user's or the machine's configuration directory for configuration settings. For single installations you could always set the directory which your application got installed into to be user writable by changing the rights of that directory afterwards but for applications that get installed on normal user computers this is a VERY hacky and discouraged move. Same about installing your application into the root of your system drive. I think it was an oversight by MS to not protect that directory too from user modifications, but was most likely unavoidable to allow DOS application installations to still work.
LabVIEW has functions to retrieve a whole bunch of those preconfigured and user writeable locations and you really should change your application to make use of those locations, instead of trying to write into the installation directory or installing the application into the root location of the system drive, if you want to be compatible with Windows Vista/7/8.
Windows 7 also requires for a number of actions such as installing programs or drivers so called elevated rights. This means that even if you are logged in as administrator you have to explicitedly provide the admin password again to be able to perform the action. This can be done by starting the program as administrator, when this is available in the right click pop-up menu, and is also sometimes done automatically for applications that Windows determines to need those rights such as setup programs for installations.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Issues with Clients moving from Autonomous to LWAPP

I have a fairly large wireless rollout of access points at my hospital's main campus and then I have 41 remote sites that have approximately 3 to 10 access points at each location.
My problem is this, I just converted one site from 9 autonomous access point over to LWAPP. The site has a 10 meg metro Ethernet connection so I know its not the link back to me. We have 26 Motion Tablets with Atheros wireless clients at that location that utilize a Citrix application called Logician. We have been having some issues with the Motion tablets holding the Citrix connection, but once we converted this site, those clients have really been having issues.
There is a high density of access points so coverage is not an issue, but I didn't know if anyone else out there may have a similar scenario and could lend some advise as to why the LWAPP causes so many issues.
Thanks in advance.

Hi. LWAPP itself should not cause service to be worse; because of the dynamic nature of its settings, it should actually improve connectivity.
Do these wireless clients have access to any services (e.g. internet) that do not require use of Citrix? If so, how is the performance there? If you're getting consistent, reasonably quick internet access, but your Citrix session keeps failing; it may not be a WLAN issue per se.
I have done several implementations of Citrix over WLAN for hospitals. Most of the time if there are connection interruptions, it boils down to one of two problems.
1.) Interference: Hospitals are very hostile environments for RF. Various building materials, large machinery, and irregular shapes in the floorplan make it difficult for RF to travel consistently.
2.) Citrix settings: Citrix is a highly configurable application. There are session timeout settings which can be tweaked which may make the system more tolerant to momentary lapses in connectivity.
My suggestion would be to see if the issue is limited to Citrix traffic only; and if it is, look at how Citrix is configured. If you're finding sub-par performance with all wireless traffic, then maybe it's an interference issue that keeps knocking you off the WLAN. If that is the case, I would suggest a professional wireless consultant should come in and decide on the best methods for giving you more consistent service.
Hope this helps! If so, please rate.

Issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

Issue with parallel operation of SAP NW SSO 2.0 and SNC Client Encryption (Logon Groups)

Hi!
One of our customers is using the SNC Client Encryption solution to ensure encryption using SNC (based on Kerberos Technology) for their SAP GUI Dialog connections. They have lots of SAP backends DEV, QAS, PRD all with the SNC Client Encryption SNC Lib installed. The profile parameter snc/identity/as contains the following value: p:CN=SAP/<ServiceAccount>@<DOMAIN>.
Example: p:CN=SAP/[email protected]
The customer is using one AD Service Account "SNCServiceUser" with one registered SPN "SAP/SNCServiceUser" for all systems (yes, this is not recommended... but the case).
Important: All users use group entries in the SAP Logon (saplogin.ini). Means, for SAP logon the SNC name can not be manually configured on the SAP Front End. With group logons, the application server's SNC name is dynamically requested by the message server each time a SAP GUI connection is started. The SNC Name is greyed out in this case as dynamically obtained from the applications servers profile parameter snc/identity/as.
Now our customer implements SAP NetWeaver Single Sign-On 2.0 within his landscape. Based on the Secure Login Server 2.0 (SP3) he likes to use X.509 based authentication to his AS ABAP backends using SAP GUI SNC while others still use SNC Client Encryption.
Replacing the SNC Library on the AS ABAP
The Secure Login Library 2.0 (SP3) has been installed on one of the ABAP systems and the SNC Client Encryption SNC Library (which is based on SSO 1.0) is no longer used, thus we changed the parameter snc/gssapi_lib to point to the new SNC library. We removed the old PSE.ZIP containing the keytab and created the new SAPSNCSKERB.PSE incl. the keytab and proper credentials. To ensure parallel operation, we kept the snc/identity/as value as is = p:CN=SAP/[email protected].
After restarting the system with initialized Secure Login Library 2.0, still the SNC client encryption works fine for existing users.
The problem
We created on the Secure Login Server an SNC certificate for the AS ABAP which has the following X.509 Distinguised Name Fomat: CN=SAP/[email protected] This is to avoid having to change the snc/identity/as to an "real" X.509 DN which would lead to non-working SNC Client Encryption for all the other users using SAP GUI and logon groups.
As soon as we install the PSE via STRUST on the system the SNC Client Encryption solution stops working with error „Server refuses kerberos key exchange“.
As part of an pilot implementation we have installed Secure Login Client 2.0 (SP3) on some test PCs. The test PC with SLC is able to perform Single Sign-On with SNC based on X.509 (incl. Encryption) to the ABAP system.
Seems the SAP System now only tries to do X.509 based authentication thus key exchange fails. The problem is, we cannot change the snc/identity/as value because of the logon groups. If we were able to do so, we would in any case set the server identity to X.509 DN and in addition create the SAPSNCSKERB.PSE incl. keytab. This should work, as confirmed by SAP see this post.
Any ideas how to solve this and have both solutions in parallel?
Appreciate any help.
Regards,
Carsten

Hi all,
we was able to fix the issue. It was an issue with the customers cluster configuration and the $SECUDIR variable. This tricky issue leads to non working or sporadic working SNC Client Encryption...
This was how the configuration looks before:
Environment variable $SECUDIR is defined:
"/ABCDEF<SID>/usr/sap/<SID>/DVEBMGSxx/sec“
sapgenpse seclogin -l -v
running seclogin with USER="<SID>adm"
Credentials for username '<SID>adm':
0 (LPS:OFF):
         (LPS:OFF): /ABCDEF<SID>/usr/sap/<SID>/DVEBMGSxx/sec/SAPSNCSKERB.pse
1 (LPS:OFF):
         (LPS:OFF): /usr/sap/<SID>/DVEBMGSxx/sec/SAPSNCS.pse
After changing the $SECUDIR to "/usr/sap/<SID>/DVEBMGSxx/sec“ and re-creating the credentials, it worked like a charm.
As a result of this we can confirm, this configuration and SNC Client Encryption works with CommonCryptoLib in parallel to the SSO configuration.
And Valerie was right with 2. SLC starting from V. 1.0 SP2 PL3 was able to convert the CN= part of the SNC Name into an SPN, was my mistake. In addition SNC Client Encryption starting from Version 1 SP1 PL1 does this also.. just to make this clear
Thread closed hope this helps someone
Carsten

Build 711 client issues with XGL?

Similar Messages

Maybe you are looking for