Build 9879 - Need to restart Win 10 if remotely logged on from other windows machine

Hi,
Installed Win 10 32 bit Build 9879. I remotely logon to the Win 10 machine without any problem from my laptop. The problem comes when I try log in from Win 10 machine itself (i.e. which has Win 10 installed). No password screen... only black screen
with a mouse.
Work around is to do remote log on to Win 10 and restart the system.
Is anyone faced similar problem ? How to resolve it ?
Thanks,
Mukul

Hi Mukul,
It sounds like you have a log on issue, right?
Based on my understanding, when the Windows 10 9879 starts, you can remotely login from other PCs, but you have a native login issue.
If I misunderstand your meaning, please feel free to let me know about it.
If there is no password screen, I would suspect this is a corrupted installation. You can remotely launch the system recovery to perform a Refresh:
Alex Zhao
TechNet Community Support

Similar Messages

My Imac says "you need to restart your computer" after logging out and click on sleep. 10.6.8?

My Imac recently gives a message "you need to restart your computer" after logging out and clicking "sleep". After a few seconds, gray screeen will roll down and give that messasge. I disconnected USB cable from my printer. Today, after turning it on, the log in screen showed then after 2 seconds the gray screen rolled down again and prompted "you need to restart the computer". I've read the apple communities about kernel panics but to no success. I have a 10.6.8, 2.7 ghz, 4GB. This is the error that showed which I reported to apple mutiple times already.
Panics Since Last Report:          4
Anonymous UUID:                    522B583E-D9D7-463D-B57E-6849A69E41D9
Wed Jan 22 11:52:33 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff7f80e2750d, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x00000000000001e0, CR3: 0x0000000000100000, CR4: 0x0000000000040660
RAX: 0x000000000000000a, RBX: 0x00000000000001e0, RCX: 0x0000000001000000, RDX: 0x0000000000000000
RSP: 0xffffff805e413eb0, RBP: 0xffffff805e413f10, RSI: 0x00000000000000dd, RDI: 0xffffff800b3eb7e0
R8: 0x0000000000000003, R9: 0x0000000000000001, R10: 0x0000000000000007, R11: 0x0000000000000051
R12: 0x000000000000000a, R13: 0xffffff804aa59004, R14: 0xffffff800d15f1b4, R15: 0x0000000000000000
RFL: 0x0000000000010202, RIP: 0xffffff7f80e2750d, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805e413b50 : 0xffffff8000204d15
0xffffff805e413c50 : 0xffffff80002d1208
0xffffff805e413da0 : 0xffffff80002e3f4a
0xffffff805e413db0 : 0xffffff7f80e2750d
0xffffff805e413f10 : 0xffffff7f80e7f7d3
0xffffff805e413f30 : 0xffffff800053e46d
0xffffff805e413f60 : 0xffffff8000285b66
0xffffff805e413fa0 : 0xffffff80002c8527
      Kernel Extensions in backtrace (with dependencies):
         com.apple.driver.AirPort.Atheros9388(426.35.3)@0xffffff7f80e1c000->0xffffff7f80 f66fff
            dependency: com.apple.iokit.IOPCIFamily(2.6.8)@0xffffff7f80804000
            dependency: com.apple.iokit.IO80211Family(320.1)@0xffffff7f80df7000
            dependency: com.apple.iokit.IONetworkingFamily(1.10)@0xffffff7f80ddd000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
System model name: iMac12,2 (Mac-942B59F58194171B)
System uptime in nanoseconds: 4614091555750
unloaded kexts:
com.apple.driver.AppleUSBUHCI          4.2.5 (addr 0xffffff7f80969000, size 0x65536) - last unloaded 128892379106
loaded kexts:
com.apple.filesystems.afpfs          9.7.1 - last loaded 1016854024083
com.apple.nke.asp_tcp          5.0
com.apple.filesystems.smbfs          1.6.7
com.apple.filesystems.autofs          2.1.0
com.apple.driver.AGPM          100.12.31
com.apple.driver.AppleHWSensor          1.9.3d0
com.apple.driver.AudioAUUC          1.57
com.apple.driver.AppleUpstreamUserClient          3.5.7
com.apple.driver.AppleMikeyHIDDriver          1.2.0
com.apple.driver.AppleMCCSControl          1.0.26
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleMikeyDriver          2.0.8f3
com.apple.kext.ATIFramebuffer          6.4.2
com.apple.driver.AppleIntelHDGraphics          6.4.2
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.AppleHDA          2.0.8f3
com.apple.ATIRadeonX3000          6.4.2
com.apple.iokit.AppleBCM5701Ethernet          3.0.8b2
com.apple.driver.AirPort.Atheros9388          426.35.3
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
com.apple.driver.AppleLPC          1.5.1
com.apple.driver.AppleBacklight          170.0.48
com.apple.kext.AppleSMCLMU          1.5.2d10
com.apple.driver.AppleIntelSNBGraphicsFB          6.4.2
com.apple.driver.AppleBluetoothMultitouch          54.3
com.apple.driver.AppleUSBCardReader          2.6.1
com.apple.driver.AppleIRController          303.8
com.apple.iokit.SCSITaskUserClient          2.6.9
com.apple.iokit.IOAHCIBlockStorage          1.6.6
com.apple.driver.AppleFWOHCI          4.7.7
com.apple.driver.AppleUSBHub          4.2.5
com.apple.BootCache          31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleAHCIPort          2.2.0
com.apple.driver.AppleUSBEHCI          4.2.6
com.apple.driver.AppleACPIButtons          1.3.6
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.3.6
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.14
com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
com.apple.driver.AppleProfileReadCounterAction          17
com.apple.driver.AppleProfileTimestampAction          10
com.apple.driver.AppleProfileThreadInfoAction          14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction          10
com.apple.driver.AppleProfileCallstackAction          20
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.driver.DspFuncLib          2.0.8f3
com.apple.iokit.IOAudioFamily          1.8.3fc2
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleBluetoothHIDKeyboard          141.5
com.apple.driver.AppleHIDKeyboard          141.5
com.apple.iokit.IOFireWireIP          2.0.4
com.apple.iokit.AppleProfileFamily          41
com.apple.driver.AppleHDAController          2.0.8f3
com.apple.iokit.IOHDAFamily          2.0.8f3
com.apple.driver.ApplePolicyControl          3.0.17
com.apple.driver.AppleGraphicsControl          3.0.17
com.apple.iokit.IO80211Family          320.1
com.apple.iokit.IONetworkingFamily          1.10
com.apple.driver.IOPlatformPluginFamily          4.7.0a1
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.2
com.apple.iokit.IONDRVSupport          2.2.1
com.apple.driver.AppleSMC          3.1.0d5
com.apple.driver.AppleThunderboltEDMSink          1.1.3
com.apple.driver.AppleThunderboltEDMSource          1.1.3
com.apple.kext.ATI6000Controller          6.4.2
com.apple.kext.ATISupport          6.4.2
com.apple.iokit.IOGraphicsFamily          2.2.1
com.apple.driver.IOBluetoothHIDDriver          2.4.5f3
com.apple.driver.AppleMultitouchDriver          207.11
com.apple.driver.AppleThunderboltDPOutAdapter          1.5.9
com.apple.driver.AppleThunderboltDPInAdapter          1.5.9
com.apple.driver.AppleThunderboltDPAdapterFamily          1.5.9
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.1
com.apple.iokit.IOUSBMassStorageClass          2.6.7
com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.9
com.apple.iokit.IOUSBHIDDriver          4.2.5
com.apple.driver.BroadcomUSBBluetoothHCIController          2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
com.apple.iokit.IOBluetoothFamily          2.4.5f3
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.9
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6.1
com.apple.driver.XsanFilter          402.1
com.apple.iokit.IOAHCISerialATAPI          1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.9
com.apple.driver.AppleThunderboltNHI          1.3.2
com.apple.iokit.IOThunderboltFamily          1.7.4
com.apple.driver.AppleUSBMergeNub          4.2.5
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOFireWireFamily          4.2.7
com.apple.iokit.IOUSBUserClient          4.2.4
com.apple.iokit.IOAHCIFamily          2.0.7
com.apple.iokit.IOUSBFamily          4.2.6
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.6
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.TMSafetyNet          6
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          289
com.apple.iokit.IOStorageFamily          1.6.3
com.apple.driver.AppleACPIPlatform          1.3.6
com.apple.iokit.IOPCIFamily          2.6.8
com.apple.iokit.IOACPIFamily          1.3.0
Model: iMac12,2, BootROM IM121.0047.B1F, 4 processors, Intel Core i5, 2.7 GHz, 4 GB, SMC 1.72f1
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 512 MB
Memory Module: global_name
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 0 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: ST31000528AS, 931.51 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x850b, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0xfa111000 / 6
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 4
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfd110000 / 3
What is going on with this error?

It hasn't been acting up since I:
1) Since I unplug my all in one printer with wifi (Hewlett Packard). I barely use the printer and it keeps cleaning out the jets and wasting my **** ink. Plus it'll do a loud self test @ 3:00 in the morning & by this time, I pulled my baseball bat from under the bed and ready to smash some skulls in the office room thinking its a burglar.
But seriously it stop doing it.
This is a late reply but confirmed after 7 months.
Note: I shut down instead of sleep my Imac now because I hardly use it.

My computer shows the grey screen that says i need to restart when i tray and boot from an external hard drive

It shows the grey screen that i need to restart when i try to boot from an external hard drive. both drives have snow leopard

Kernel Panics? Don't panic too!
"You need to restart your computer" (kernel panic) message appears (Mac OS X v10.5, 10.6)

I need help! I cannot access my iTunes from my window's. I keep getting message "error 7" and also MSVCR80.dll missing. I do not know how to access this?

I need help! I cannot access my iTunes from my window's. I keep getting message "error 7" and also MSVCR80.dll missing. I do not know how to access this?
I tried downloading the latest version of iTunes, but it does not sync to my windos 7 HP because of the previous messages. Any feedback would be greatly appreciated.
Thank you,
ElsaV73

Hope this article helps you:
http://support.apple.com/kb/TS5376
Pleas reply with any further questions.

Setting up a remote log in from macbook air to a server

best way to set up remote log in from Macbook Air to a protected server to do work from macbook air remotely

Hi,
if your printer is supported to be published in the Internet, you may able to do this. If it is not supported and if the Printer is not in the same network or directly connects
to your Windows Server 2003, I’m afraid that there is no method to setup.
To connect to a printer on a network
https://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/print_connect_net_printerw.mspx?mfr=true
Hope this helps.
Jeremy Wu
TechNet Community Support

Can I build an application for a linux machine from a windows machine?

Is it possible, with LV2012, to build an application for a target other than the the machine type that I am working on?
meaning, can I build an application to run on a linux machine from my development machine, which runs on windows?
alternatively, can I build an applications to run (natively, no WOW) on a 32-bit OS from a development machine that is a 64-bit OS and 64-bit labview?
Or does LV only build for similar targets as the development platform, and I would need to move the source code to another development machine to generate code for a different type of target machine?
Thank you!
Solved!
Go to Solution.

You can only do a build for the OS that you have a license for and for the OS bitness that you are using. In other words, you need LabVIEW for Linux or LabVIEW for Mac to build exe's for them and you need LabVIEW Windows 64-bit to build a 64 bit exe. It does require moving the source code to the other development systems.

I need to type in or copy/paste words from other languages (cyrillic for example) but when I do it the only thing I get is a "????????" instead of the word I want to type or insert. What should I do?

That happens when I don't know how to write so I copy/paste words from other languages, it also happens when I copy words in other languages written in a Word document, and then paste it on a website using Mozilla. This doesn't happen when I use Internet Explorer.

Well you second post was the correct question because I was going to say you got a second hand macbook pro, didn't change anything, and expected mail to work with your ISP. The mail settings were thus those of the previous owner. So you are correct to ask what your ISP's settings should be.
Unfortunately I can't answer that. You have to get that from your ISP. They proably have a web page for it.
You need to know:
Incoming mail server (pop)
Incoming mail server login name
Incoming mail server password
POP port
Does is require SSL?
Authentication for using POP server (probably password)
Outgoing mail server (SMTP)
Outgoing mail server login name (probably same as incoming)
Outgoing mail server password (probably same sas incoming)
SMTP port
Does is require SSL?

I am building a new PC and need to swap the PS Elements 10 Licence from the old machine to the new - the old machine will be scrapped

I am building a replacement PC, and want to install PS Elements 10 on the new machine. It is currently on the old machine and that machine will be scrapped once the new one is running - how do i go about this ?

You are allowed to have the software installed and activated on two machines, but since you are scrapping the current one, you should deactivate the software on it if you are able to.... open the program and choose Help -> Deactivate. If you are not able to access the machine to do this, then you should contact Adobe Support by chat or phone and have them do it.... Contact Customer Care
All you need to do is install the software on the new machine (assuming it is compatible). If you need to download PSE10 you can find it thru the following page...
Download Photoshop Elements products | 11, 10
You will need the serial number to activate the software. If you do not have it at hand, you might be able to find it in your Adobe account online.
To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html

Need to run VI on boot or call from other application

I am looking for the most basic way to get Labview to run a VI upon bootup or call from another application (without having to hit the run button on the toolbar.) I would rather not have to build an application; I don't want to buy the professional version. I want my data acquisition to recover from a power outage reboot and keep going without human intervention. Is there a way to build an init that launches the VI in run mode? A colleague of mine has convinced me labview is the way to go for a new experiment, but this is one stumbling block that needs to be resolved. Thanks for any help you can give.

i have used the startup folder to run labview vi's on several machines and it *can* work just fine.
however, sometimes there is a timimg problem and i get the message 'vi not found,' then labview usually loads the vi and runs - but leaves the error message, which can cause problems with later operations.
today i had this problem with a 3.4 G HP machine running Win200. Labview 7.1 & DAQmx.
my work around solution is to use the *MarcroScheduler* program. i call a it from the startup folder. it does the following
(a) start Labview 7.1
(b) wait 1 minute
(c) execute the vi.
without the wait state, Labview 7.1 will not run the vi properly.
good luck with your applications.
cu,
larryb

Remote Desktop Connection from a Windows 8.1 laptop to a work PC using Windows 7

Hi!
I posted this question in the MS Community forums and they redirected me here... I searched the forums here but didn't find anything that helped with my problem. So here is my original question (posted originally here: http://answers.microsoft.com/en-us/windows/forum/windows8_1-networking/remote-desktop-connection-to-a-work-pc/5fa25045-de24-4a7c-9c8e-caf9ce17e444):
For the past few weeks, I've been trying to set up a VPN connection to my work PC so I can work from home.
Work PC runs on Windows 7 (I assume Pro, but I can't confirm at the moment).
Home laptop runs on Windows 8.1 (the laptop came with Windows 8 already installed, so I assume it's the standard, or Home, edition. I manually upgraded to 8.1).
Now, after many migraines and sleepless nights fiddling with settings, the VPN connection works. However, what prevents me from completing the connection is Remote Desktop Connection.
Here's the error I get:
"Remote Desktop can't find the computer "<computer name>". This might mean that "<computer name>" does not belong to the specified network. Verify the computer name and domain that you are trying to connect to."
Note:
- I DO have the correct computer name. I have a working connection to my work PC from my personal desktop PC (running XP), though I sometimes need to travel and a laptop is much more practical to carry around than a PC... ;)
The VPN Connection Wizard never asked me to enter my destination PC username and password (so my work Windows credentials). Why?
Any ideas as to why Remote Desktop doesn't want to connect?
Any suggestions as to what I can try to fix the problem?
Thank you for all the help!
Julie

Are you able to ping the remote system by name? It sounds as though you are connecting to VPN but are unable to resolve the names of the host network. A few things that I would think of:
If the home system is not on a domain and the work system is, you may need to use the Fully Qualified Domain Name (FQDN). For example, instead of
computer you would enter computer.domain.com.
You may want to check if your VPN connection is configured as a default gateway, otherwise if your home and VPN network have the same IP address range you may be experiencing a conflict.
See the instructions provided here.
You also may want to check the DNS settings for the VPN connection to ensure that it is finding the DNS server for the remote network and thus is able to resolve the hostname.
You may want to try connecting Remote Desktop via IP address to determine if the issue is with name resolution (DNS) or connectivity.
Brandon
Windows Outreach Team- IT Pro
The Springboard Series on TechNet

I have just bought a new computer with Windows 7 and I need to transfer all my I tunes records from my Windows Xp computer. How do I do this without losing any of my songs?

I have just bought a Compaq Desktop Computer with Windows 7 but I do not want to set itup until I know how to transfer my 1800 songs from my ITUNES library on this old Windows XP Pro to a new set up on my Compaq. If anybody could please help me in simple language ( I am only a user with very little knowledge and nil jargon) I should be most grateful. Is there anybody out there to solve my dilemma?

Did you purchase all your music from iTunes, or import it from CDs?
If you've purchased all your music from iTunes, it now keeps track of your purchased items. All you would need to do is download iTunes on your new computer and log in with your Apple ID (the account you set up on iTunes). Then on the right hand side (in the bar) near the top there is a section that says "Purchased" *NEW*. There it will show you all your music and give you an option to re-download it on to your new computer. *You will need to authorize the new computer and deactivate the old one if you're not using it anymore*
If you imported your songs (or otherwise obtained), my best suggestion to you is to get a USB stick/thumb drive/external hard drive and copy all your music from your old computer on to the USB stick. (You can do it with a network, but that's assuming you have one set up already in your home).
To do that, you need to go to Music > iTunes > iTunes Library (folder) (this may not be exact as I use a Mac. I'm going from memory here). Right-click the folder and click "Copy". Go to My Computer and click on whatever drive is your external/USB stick (would be like E:\ or something). Double click on that, then right click in the next window and click Paste. This will copy your entire iTunes Library on to the separate hard drive.
Once it is finished (and with 1800 songs it will take a while, so go read a book or something), properly eject the external hard drive and plug it in to your new computer. Open Music > iTunes and do the same process to copy and paste the folder into there.
Once that is finished, open iTunes and all your music should be there. If not, go File > Import Folder and then find your iTunes Music folder and click it, then click Import and it will import them into iTunes for you.
Hope this helps and is clear enough for you. If you have any other questions, please ask and I'll do my best

Is there a way to access my Mac via remote desktop from a Windows machine?

Hi, I'm lookinf for a way to connect from work to my Mac at home. I can do this using VNC and it works, but it is freaking slow! I also dont want to use the Chrome remote dekstop plugin or TeamViewer, there must be a RDP client that can go from Windows to Mac.
Does any of you have some recommendation!?
Cheers Thomas

Have you tried enabling Screen Sharing & File Sharing on the Mac?
Looks like only EDC client for Macs...
http://www.microsoft.com/mac/remote-desktop-client
Then there's LogMeIn...
https://secure.logmein.com/

How to UPDATE ESX Server 3i, 3.5.0, build 207095 using SSH or VSphere CLI remotely!

Hello Guys,
Over the past few hours I have been posting related questions and I have gotten a little closer to updating my server/host.
I have gone to the ESX Server 3i updates (Embedded and Installer) and I have noticed that the first build for ESX 3i is 207095. Which means that I have not done any updates since the installation. CORRECT!
Now... I have been using "ESX Server 3 Patch Management guide, which instructs us to use esxupdate, but it appears that some of the command in that document is not supported on my host.
This post: vihostupdate35 | VMware vSphere Blog - VMware Blogs ..... Tells me that I will have to use "vihostupdate35" from a remote CLI which I installed but cannot see how to connect to the server as I cannot find any document that shows the syntax etc.
At this point I am confused and frustrated and just need a little more guidance from someone who could point me to a document or copy and past the procedures I need to use to get this update done.
I have downloaded this file to do the UPDATE: "ESXe350-201302401-O-SG.zip" and I have extracted it on the host on a Datastore and copied it to my "/Tmp/ESXi350" folder.
I have also extracted it there as well just in case I need to browse to the extracted folder, and run any command.
Can anyone out there help me with the correct SYNTAX and METHOD to get this update installed?
I can connect with SSH from a windows machine using puTTy.exe as well as I have VSphere CLI installed on another Windows PC and can browse to the "C:\Program Files (x86)\VMware\VMware vSphere CLI\bin" folder to run "vihostupdate35.pl" I can see it in the folder with a "dir" command:
12/11/2014 03:50 PM                 0 esxcli.exe.log
08/13/2014 08:55 AM         1,898,106 esxcli.zip
08/13/2014 08:55 AM            12,300 EULA
08/13/2014 08:55 AM            63,778 EULA.rtf
08/13/2014 08:55 AM           207,212 open_source_licenses.txt
08/13/2014 08:55 AM         2,131,968 python26.dll
08/13/2014 08:55 AM            31,348 svmotion.pl
08/13/2014 08:55 AM                82 vcli.bat
08/13/2014 08:55 AM             9,994 vicfg-advcfg.pl
08/13/2014 08:55 AM            12,080 vicfg-authconfig.pl
08/13/2014 08:55 AM             9,196 vicfg-cfgbackup.pl
08/13/2014 08:55 AM             9,456 vicfg-dns.pl
08/13/2014 08:55 AM            13,032 vicfg-dumppart.pl
08/13/2014 08:55 AM            17,081 vicfg-hostops.pl
08/13/2014 08:55 AM            27,513 vicfg-ipsec.pl
08/13/2014 08:55 AM            78,858 vicfg-iscsi.pl
08/13/2014 08:55 AM             7,129 vicfg-module.pl
08/13/2014 08:55 AM            20,277 vicfg-mpath.pl
08/13/2014 08:55 AM            18,477 vicfg-mpath35.pl
08/13/2014 08:55 AM             8,606 vicfg-nas.pl
08/13/2014 08:55 AM             9,696 vicfg-nics.pl
08/13/2014 08:55 AM             7,425 vicfg-ntp.pl
08/13/2014 08:55 AM             2,989 vicfg-rescan.pl
08/13/2014 08:55 AM            13,808 vicfg-route.pl
08/13/2014 08:55 AM            22,439 vicfg-scsidevs.pl
08/13/2014 08:55 AM            12,716 vicfg-snmp.pl
08/13/2014 08:55 AM             5,731 vicfg-syslog.pl
08/13/2014 08:55 AM            37,949 vicfg-user.pl
08/13/2014 08:55 AM            27,369 vicfg-vmknic.pl
08/13/2014 08:55 AM            13,313 vicfg-volume.pl
08/13/2014 08:55 AM            37,164 vicfg-vswitch.pl
08/13/2014 08:55 AM            17,712 vifs.pl
08/13/2014 08:55 AM            24,230 vihostupdate.pl
08/13/2014 08:55 AM            13,787 vihostupdate35.pl
08/13/2014 08:55 AM            41,721 vmkfstools.pl
08/13/2014 08:55 AM            60,794 vmware-cmd.pl
08/13/2014 08:55 AM            49,664 w9xpopen.exe
              56 File(s)      5,317,017 bytes
               2 Dir(s) 34,432,933,888 bytes free
...So how do I complete this?
(So Close!)

Thanks A.P.!
Your post led me to the answer here:
VMware KB: ESXi Server 3.5 June 2011 Rollup CD image
I missed an update and for that reason I have to do a clean install as stated at the link above.
My version cannot do any upgrade or update anymore!
*** What you need to know about the Secure Key Update ***
ESXi Server 3.5 June 2011 Rollup CD image (2000593)
This Installable CD contains ESX Secure Key Update ESXe350-201012401-I-BG.
For more information on this patch, see Critical Impact: VMware ESXi 3.5, Patch ESXe350-201012401-I-BG: Apply this patch to continue applying patches on ESXi 3.5 hosts after June 2011 (1030002).
NOTE: If you have not applied this patch by June 1, 2011, you will not be able to apply any patches from then on. To get your hosts updated with ESX Server 3i version 3.5 is to apply this Installable CD as fresh install. Alternatively, upgrade to ESXi 4.0 Update 1 Installable.
Thanks for your suggestions ... at least it led me to the answer.
One clean install coming up!

Remote desktop policy works on Windows 7, but not on Windows 8

Hey all,
We have a mixed environment of Windows 7 and Windows 8.1 machines.
Our standard policy enables remote desktop on all machines (and another part of the policy sets the groups allowed to remote access).
On windows 7, we are able to RDP to all machines
On windows 8.1, remote clients cannot connect, with a timeout error. This occurs from other Windows 7 or Windows 8 machines.
I have confirmed:
- The policy has applied (by looking in the registry under HKLM\software\policies\Microsoft\windowsNT\Terminal services)
- The windows firewall is letting the RDP traffic through (and the issue still occurs if the firewall is off)
- The group policy templates being used in the policy are Windows 8.1 and the GPO was created on a Windows 8.1 machine
- If I set the registry key HKLM\System\CurrentControlSet\Control\Terminal Server\fDenyTSConnections = 0, manually or via GP Prefs, it still does not work
- There are no visible errors in the application, system or security logs
- I have compared registry snapshots before and after the change below and cannot see any differences in the relevant keys
If I take the machine out of the OU and place it into a "noPolicy" OU, connections still do not work (after setting the regkey above) - however, if I use the GUI to turn off remote desktop then turn it back on, it works. I can then place the computer
back in the original OU (where policy is applied) and it still works.
All this leads me to believe that remote desktop is not being turned on "properly" (for want of a better term) by group policy and doing so via the GUI is doing something different/additional.
So...
- Has anyone seen this before ?
- Anyone know how to turn on some sort of trace logging for this ? I have been unable to find a setting for this as yet ?
Thanks.

Hi Ben,
Did this happen to all Windows 8.1 clients?
>>however, if I use the GUI to turn off remote desktop then turn it back on, it works. I can then place the computer back in the original OU (where policy is applied) and it still works.
Did we try restarting the machine to tackle the issue, for sometimes restarting can be helpful.
>>Anyone know how to turn on some sort of trace logging for this ?
I am not sure this is what we want for tracing this issue, but for tracing group policy processing, Gpsvc.log can be helpful.
Regarding how to collect Gpsvc.log, the following blog can be referred to for more information.
Userenvlog for Windows Vista/2008/Win7
http://blogs.technet.com/b/mempson/archive/2010/01/10/userenvlog-for-windows-vista-2008-win7.aspx
Best regards,
Frank Shen

Sorry - basic question; 'Simplest way to set-up Remote Log-in'

I'm not sure if this is the right area to post this, but the question is at least quite simple;
what's the best, quickest, 'easiest' way of remotely logging on from home to work i.e.
to access and use applications and files.
Leopard at home, Leopard at work ...

Leopard's built-in screen sharing. Search your Mac Help for "screen sharing" for information and instructions. If you need further assistance, you can probably get lots if help in the Mac OS X 10.5 Networking forum.
Regards.

Build 9879 - Need to restart Win 10 if remotely logged on from other windows machine

Similar Messages

Maybe you are looking for