Build and Drop Indices for Info Cube
Hi,
How or Where can we Build Indices and Drop Indices on Info Cube?
Thanks & Best Regards,
Venkata.
Hi Venkata,
Although you can, you don't have to do it manually, you can add these process (drop index and build index) to the process chain where you load the InfoCube.
If you don't how pass me your email and I send a document.
regards,
Sebastián.-
Similar Messages
-
Dear Experts
I am facing an issue for the data source 2lis_11_vaitm and 2lis_11_vcitm for info cube 0SD_C03. When i create transformation on update rule, it gets created with warnings but no issues. When i try making a transformation on update rule it gives errors about abap routines and start routines. Then i would go for migrating 2lis_11_vaitm but that cant be done because of above mentioned error. I have migrated other data sources same way. The reason i am doing so is because of making exact transformations as trsansfer and update rule.
My objectives is migrating 2lis_11_vaitm and 2lis_11_vcitm to 7.X etl flow. Am I right on the sequence of steps? cause my main issue is when my info package starts writing data in PSA in errors out for both 2lis_11_vaitm & 2lis_11_vcitm. The IDOC has the same problem. So migrating seems to be the only solution. Plz help and FYI my patch levels on bi system.
compo Rel. SP-lev. Supp. pack Desc.
SAP_ABA 701 0010 SAPKA70110 Cross-Application Component
SAP_BASIS 701 0010 SAPKB70110 SAP Basis Component
PI_BASIS 701 0010 SAPK-70110INPIBASIS Basis Plug-In
SAP_BW 701 0010 SAPKW70110 SAP Business Warehouse
BI_CONT 706 0000 - Business Intelligence ContentThe errors I face during the transformation activation while making them on the update rule are following.
Start Routine: Syntax error in routine
Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_2S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_3S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_4S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_5S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_6S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0QUANT_B, group: 01 Standard Group): Syntax error in routine
Rule (target: 0DOC_ITEMS, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0COST_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GR_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NT_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0VOLUME_CDM, group: 01 Standard Group): Syntax error in routine
Rule (target: 0HDCNT_LAST, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BP_GRP, group: 01 Standard Group): Syntax error in routine
Rule (target: 0CP_CATEG, group: 01 Standard Group): Syntax error in routine
Rule 39 (target field: 0CRM_PROD Group: 01 Standard Group): incomplete master data rule
Rule (target: 0DEB_CRED, group: 01 Standard Group): Syntax error in routine
Rule (target: 0DOC_CLASS, group: 01 Standard Group): Syntax error in routine
Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
Key rule 44 (target field: 0VERSION): Initial update set
it has as many routine as many syntax errors in routine. -
UIX drag and drop editor for OAF?
I posted the following question on the OAF forum, was told it might make more sense to do in the JDeveloper forum:
I've been told there is a "drag and drop" editor for UIX which can be used with OAF. Is that correct? I am using the following with EBS 11.5.10:
OA Framework Version 11.5.10.4RUP.
MDS Version 9.0.5.4.89 (build 555)
UIX Version 2.2.24
BC4J Version 9.0.3.13.93
If there is such an editor, where can I get it, and how do I install it?Shay, thanks for the response.
I have not written any ADF code outside of the course I took a few months ago, but I'm aware of how powerful it is. My question has to do with using the same toolkit or something similar to create and/or modify OAF pages. My customer is using EBS 11.5.10, and as such is using JDeveloper 9.0.3.5. If I can show how to use ADF with EBS, even if it is in R12, I might be able to convince the customer to use ADF. However, any application we develop must work along with the rest of the EBS, so that means we must use the same security mechanism (responsibilities, menus, etc.).
Currently, to my knowledge at least, there is nothing as simple as your demo which can be done with OAF. There is no drag and drop capability, unless I've missed something.
Any comments? -
Delta update for Info cube, How it will be works, what are mode to select.
Hi all,
How delta update works for info cube, Generic data source delta update options are
1) time stamp
2) Calday
3) Nemeric pointer
Please explain briefly delta update for infocube and delta init and delta update.
Thanks,
GowdaHi,
How delta update works for info cube
When you are updateing the data to cube from ods then data would extracted from change log their delta pointer get setup in the source request (in Source you can check the option beside the reqest says updated to target object.... it means the records are updated to target hence we would not update the same request )
Incase of PSA to cube Also in the PSA request get stamped as last updated .
Regarding Generic Datasource
When we don't find any standard extractor then we can go for Generic(if i want information sales along with finance information in a data source then generally we dont get standard one hence we can go for generic DS)
Check the below link for More about generic DS .
http://wiki.sdn.sap.com/wiki/display/BI/Generic+Extraction
for Delta capturing you can use
Timestamp(if the table has time stamp filed so it can stamp the last changed record in that table hence it is easy to get delta based on the time stamp)Calday- (If the table doesn't have the Timestamp filed then search for Calday where you can stamp the delta based on the date when documents are changed )
Numericpointer : If the table doesn't above both then we go for this option where you can the numeric value change stamp )
Re: Extraction, Flat File, Generic Data Source, Delta Initialization
Regards,
Satya -
How to disable drag and drop feature for a document library?
Hi
How can I disable drag and drop feature for a document library? Do I have an option to disable it from the SharePoint's feature set?
Or can I disable it using a script? If so, how?
Regards
ParuHi,
According to your post, my understanding is that you want to disable drag and drop feature for a document library.
Drag and drop in SharePoint 2013 is a feature that depends on HTML5, which requires version of browser, SharePoint by default doesn’t has feature to disable or enable this.
You can try disabling the drag and drop feature by disabling an add-on in Internet Explorer, or
using Internet Explorer 9 or lower.
Here is a similar thread for your reference:
https://social.msdn.microsoft.com/Forums/office/en-US/8961ff07-039d-47b0-ae7d-8e24af96234a/2013-doc-library-settings-turn-off-drag-and-drop-and-findsearchfilter-on-metadata-columns?forum=sharepointcustomization
http://community.office365.com/en-us/f/154/t/228079.aspx
More information:
The Solution to SharePoint 2013 Drop and Drag Not Working
SharePoint 2013 Drag and Drop Upload Not Working
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Virtualbox - install build and header files for your current kernel
I have initially installed virtualbox before upgrading the Arch
Also took backup of the kernle before upgrading since kernel26 2.6.30 is having problem with virtualbox
After upgrading I have configure the grub to use the previous kernel i.e 2.6.28
Later installed xorg and want to install the video drivers from VBox additions
but running
sh VBoxLinuxAdditions_x86.run
i get the following
install build and header files for your current kernel
The current kernel version is 2.6.28 Arch
What are the build and header files I have to install or search with pacman
And since i have upgraded the system will I able to look up the header and build files needed for kernel 2.6.28dmartins - he's talking about his kernel's headers, not the kernel-headers package - they are two very differnet things.
sant527 - when you backed up the 2.6.28 kernel, did you remember the files in /usr/src/linux-2.6.28-ARCH/ ? They're what VBox is looking for. -
What is ' build indices' and ' drop indices' in a process chain
Hello ,
can any one explain me ,In transaction loading process , in a process chain , after activating Data in DS object, what is ' Drop indices' and what is 'buid indices'
Thank you .Hi,
These mostly deal with the indices in a cube. When you load data to a cube, if the indices are present, along with loading the fact tables and dimension tables, the index tables also need to be filled. This requires the system to search for the right location in the index to place a new transaction data row and hence slows down the load.
Inorder to speed up the loading, the indexes are first deleted, data is then loaded into the cubes, and the indices are rebuilt. This is a much faster process than loading the cubes with the indexes intact.
Hope this helps,
Regards. -
Drag and Drop functionality for SVG charts.
Has anyone been able to get a drag and drop functionality with charts?
I've read where Vikas was able to accomplish this with reports, but, unfortunately, it was an old post and his example is no longer available.
I understand that this is more on the browser/presentation layer rather than the back-end, but, judging from the replies from the mainstays in this forum along similar lines, I'm hoping someone may have accomplished this already.
I'm trying to get this to work for a "dashboard" type application I'm trying to prove out using HTMLDB.
Your responses are appreciated.
ThanksHello,
I've done drag and drop using the Adobe SVG Viewer before in a whiteboard application built on top of ... you guessed it... Apex. Unfortunately I do not have an example I can share with you but I know it can be done because I did it, trust me ;) . I am planning on building out that application as an application anybody can download and use but unfortually it will be bit.
Your best bet at the moment is looking on google http://www.google.com/search?q=svg+drag+and+drop there are quite a few examples.
Oh also look at this file in the images directory /images/javascript/svg_js_includes/svg_common/oracle.svgNodes.js it has quite a few helper functions and that file is included in every chart by default so there are functions you can use, (no drag and drop unfortunalty)
If you have can lock down the users in your environment to use only Firefox or Safari you can look at canvas as well it's pretty handy and can do alot of the same stuff
http://developer.mozilla.org/en/docs/Drawing_Graphics_with_Canvas
and of course some simple examples in Apex
http://apex.oracle.com/pls/otn/f?p=11933:78 (it runs on keypress in the textarea I use it to mess with Canvas constructs)
Carl
Message was edited by:
Carl Backstrom -
Can we use actual and plan data for same cube?
hi friends,
can we use actual data and plan data in same cube in bps.
Thanking u
suneel.Hi,
Let us take std cube 0SD_C03 where we store billing info,sales order info and delivery info. But still in reporting we can get values without any mismatch in their respective KF. It is possible because of a cahracterstic called Documnet category which gets values in update rule by constant .
Similarly we can have 2 types of data (plan and actual) in a single cube by having different value for a characterstic. Most frequently used characterstics for this are 0VERSION and Value type.
With rgds,
Anil Kumar Sharma .P -
Extractors for Info Cubes only
Hi All
Why some extractors with delta capabilities are loaded directly into info cubes nly ? Any Valid reason ?
VanajaHi Vanaja:
In some cases the first release of the Extractors didn't have ODS capability, but even though this feature was improved in further Business Content releases the corresponding DSOs were not includeded as part of the data flow. As an example of this please refer to SAP Note 440166 - "ODS capability for shipment and shipment costs DataSources".
Regards,
Francisco Milán.
Edited by: Francisco Milan on Jun 30, 2010 7:04 PM -
Any "drag and drop" tricks for transferring TM backups onto new drive?
I've read many of the previous threads like mine, but my situation seems to be unique.
I have a damaged Time machine disk that is corrupted and can't be repaired by any disk utility programs. And I want to temporarily transfer the TM backups to another hard drive while I reformat the TM disk. I have snow leopard, but the finder won't let me drag and drop my time machine backups (Backups.backupdb) onto a new drive. I get the same "The backup can’t be copied because the backup volume doesn’t have ownership enabled" error. However, when I get info on the drive I want to transfer the backups to and uncheck "ignore ownership on this volume", I still get an error when dragging and dropping the time machine backups. The new error reads "This operation can't be completed because it isn't supported."
Are there any other things I can try to get drag and drop to work? I would have used the methods described above (clone the TM drive using disk utility or CCC), but I can't do that as my time machine disk contains a lot of other items besides the TM backups, and the disk I'm trying to drag the TM backups too is actually smaller than the TM disk. Since my TM disk is corrupted, I can't delete the extra files on the disk to make a clone that would fit on my smaller new disk. So I'm unable to clone my TM disk because it's too big. Is there any other way to make the drag and drop work in snow leopard? Everyone says it should, but I've been unable to get it to work.Jottle wrote:
I have a damaged Time machine disk that is corrupted and can't be repaired by any disk utility programs. And I want to temporarily transfer the TM backups to another hard drive
That cannot be done. If the backups are corrupted beyond repair, they're useless. Even if you manage to "clone" them, the copy will also be corrupted beyond repair and useless.
my time machine disk contains a lot of other items besides the TM backups
That's a problem, too. See #3 in the Frequently Asked Questions *User Tip,* also at the top of this forum.
Copy as much of the "other" stuff somewhere temporarily, reformat the disk into (at least) two partitions (see #5 in the FAQ Tip), copy the data back, and start TM fresh on it's own, exclusive partition.
Or, depending on the age of the disk, I'm not sure I'd trust my backups to it. It might be smartest to replace it. Use the old drive for the "other" stuff, and the new drive exclusively for TM backups of both your internal and the "other" external. -
Multi-row "Drag and Drop" works for some users, not others
Background: We are working on Win7 SP1 clients, Project Prof. 2010, SP2
A couple of users have reported that they cannot move ("drag") multiple selected rows in a task sheet, only a single row at a time. Other MS Project users around them (and myself) can move multiple rows with the "Drag"
feature. "Drag and Drop" is selected in the "Options/Advanced" section of both their local global template and the Enterprise Global.
To my knowledge, the multiple row selections contain no collapsed summary tasks, in case that might be an issue.
I'm suspecting some Windows setting is amiss on the offending clients, but wanted to see if anyone else had seen this behavior before in Project Prof. 2010.
Thanks!
JTC
JAckson T. Cole, PMP, MCITPThanks for the response, Shiva!
User community is on MS Project 2010 (14.0.7011.1000) SP2, MSO (14.0.7128.1000)
To reproduce the problem, MS Project user will select multiple task rows by selecting first row, then holding MB1, and "sliding" to the last row desired. The problem manifests itself by NOT turning the cursor into the "four-arrow cross"
after selection is accomplished. If only one row is selected, the ability to move that row alone is available.
Again, only a couple of users (that have called me!) are seeing it. Their officemates are not having an issue.
FYI ...
JTC
JAckson T. Cole, PMP, MCITP -
Desktop drag and drop icon for my "other" computer
i really need an icon for my MacBookPro desktop to reside on my Mac Pro desktop (and vice versa) so that I can just drag and drop copy (or move) data from one volume to another. sort of like what I have with my dropbox icon in the sense that I can just keep this on my desktop and in the View Pane of Finder and drag and drop items or open the volume etc.
is this possible and i am just not getting it to work because i don't have things set to mount automatically or is there a restriction that does not allow this that I don't understand?
i am on snow leopard and the connection is via wi, but I could plug in via ethernet when i know i will need to do this sort of moving of data a lot.
thanks for clearing any of this up for me.
- jonif as3, create a sprite or movieclip and use:
image1.addEventListener(MouseEvent.MOUSE_DOWN,downF);
image1.addEventListener(MouseEvent.MOUSE_UP,upF);
function downF(e:MouseEvent):void{
Sprite(e.currentTarget).startDrag();
function upF(e:MouseEvent):void{
Sprite(e.currentTarget).stopDrag(); -
How to use standard infocubes and creation of customized info cubes
Hi Gurus,
1.How to see particular standard info cube suitable for reporting.
2. How to implement in dev. If standard info cube is not exactly suitable then what to do means can u make changes to standard info cube(I hope it wont possible)
3.how to create customized info cubes.
4.please send me the links with screen shots.
Regards,
razzHi Narasimha,
1.How to see particular standard info cube suitable for reporting.
If you have the name of the Infocube. Go to RSA1 transaction. Selecct Infoproviders in the left pane. Click on Find--> enter the cube name you want to search
Standard cube starts with 0(zero), whereas Customized cube starts with Z.
2. How to implement in dev. If standard info cube is not exactly suitable then what to do means can u make changes to standard info cube(I hope it wont possible)
I dont think you ca make changes to standard cubes. If you want to make any changes, copy the standard cube(If u right click on cube, we have a option of copy) & so the changes in the cusomized cube.
3.how to create customized info cubes.
Just goto RSA1-->select infoprovider in the left pane.
In the right pnae, rightclick-->create Infocube. Infocube is created!
Hope it helps!
Regards,
Pavan -
Drag and drop samples for instant load and playback. MIDI SAMPLE PLAYBACK
HI, i am looking for a application where I can drag samples in it for instant midi playback.
I know logic has a way to do this through the ESX24, but the problem is there are multiple steps and it can takes around 1-3 minutes to finished the task.
I am looking for something on a more "spend less time setting up" event. Basically an application where I can manual drag and drop for quick load. I would like to use the Roland Hand-sonic as my midi play backsonther, I've only tried the audiofinder out a little bit running in demo mode. I liked it ok, except that I thought I'd go and let it index my audio files, which took a very long time (fair enough, I have many).. but I didn't really see any great advantage from having done so. also I found that for some files it would give me a waveform overview, others it would say preview not available or something, even though they were the same format. maybe that was a demo limitation thing.
but it did get me thinking about how much I'd like to work better with my audio in the finder.. I've hated the audio import and audio window management in logic for a while so I'm always looking for better ways to do things.
...then, I saw this:
http://www.audioease.com/Pages/Soundabout/SoundaboutMain.html
now, I just checked and the website is currently updating this page. but go back later until you see it back up. there was a QT demo video (complete with that generic dutch-english accent..), showing what looks to me like exactly the enhancements I've been looking for, to work much better with audio in the mac finder. and of course it's got a few things that I didn't even know I was looking for, but now I know.
I'm hoping it gets released soon.. and I'm also hoping that it's not going to mess around with leopard when that comes out, because I have a feeling I am going to get very used to using this thing.
even for things outside logic, like quickly rounding up my work in progress files to instantly convert to mp3 and AAC right there in the finder, and then automatically have it all placed in an email ready to go, it's going to make life a whole lot easier. especially when you've been working hard on a deadline project, the last thing you feel like doing is messing around keeping your work in progress files in order, prepping mp3s or whatever and emailing, after you've finished a long day at logic.. seriously, check out the video when it's back up..
et dis-moi sonther, ça se fait comment que tu parles français? t es pô un ptit québecois par hasard?....
Maybe you are looking for
-
Problem with variables in formulas when using CrystalReportViewer
Post Author: Aksu CA Forum: Formula Hi! I have a problem with variables in Crystal Reports formulas, when using CrystalDecisions.Windows.Forms.CrystalReportViewer class from VS2005-project. ReportViewer always gives error:*************Crystal Report
-
Need to read source file without deleting it - Sender SFTP adapter
Dear friends, The data from the source file needs to be read by PI on a daily basis. The file should not be deleted. Vendor updates the file on a daily basis with file name DataFeed.xml How to acheive this in Sender SFTP adapter ? Kindly guide me Re
-
We have recently upgrade from BW 3.10 to BI 700 including Java Add-in. Today morning, we shutdown and restarted the Server. ABAP is up but java is not working. I've find the following message in dev_jcontrol file: [Thr 01] JStartupICheckFrameworkPac
-
Pass REQUEST from button to item on another page
Maybe it's too early in the morning but I'm not seeing what I'm missing: Button on page 1 branches to page 2. Page 2 is Interactive Report Need report to restrict display per button request, i.e., the "Vice President of Finance/Operations" button wil
-
Mac NativeMenu non-English problems
Hi all, I'm working on an AIR application that includes a number of custom menus that are added like this: application.menu.addItem(new NativeMenuItem("New Menu")); This works fine on Windows, and on MacOSX in English. But users in Germany, France,