Build and Export Cache

I've already posted this in the Bridge forum, but I thought it might just be relevant to ACR too, so here goes...
I've just bought a Panasonic GF2. ACR support was introduced with 6.3, so I have no problems with opening its raw files in 6.3 or 6.4RC.
If I click on a newly-uploaded raw thumbnail in Bridge, a high quality preview is generated, as expected. However, if I select the entire folder, and select 'Build and Export Cache', nothing happens - I am returned to Bridge as if nothing happened, and the thumbnails stay showing the embedded versions.
This is something I do regularly with my Nikon D300 raw files. Bridge usually counts through the images, and the previews are updated with the ACR-generated HQ versions. But no so with the new GF2.
I wondered if this had anything to do with GF2 support in ACR, rather than Bridge itself?

Curt Y wrote:
I checked the site http://www.adobe.com/products/photoshop/cameraraw.html and there is no Panasonic GF-2 listed for ACR 6.3
I thought 6.4 was releaseed, but all I see is 6.4 release canidate.
In fact all the cameras begin with DMC. This camera mey be too new. Have seen some posts to suggest it can take as long a 2 months to get a new model covered.
It's the 7th one down!
I can open the raw images fine, and if I actually click on a thumbnail or several thumbnails, Bridge generates HQ previews. All that's happening is that Bulid/Export Cache isn't working for this camera.
I am using 6.4 RC. I might try rolling back to 6.3.

Similar Messages

"Build and Export Cache" fails to export 100% Previews:

"Build and Export Cache" fails to export 100% Previews:
I am moving from Bridge CS5 to CS6 and have a very large number of 100% Previews in my CS5 cache. The idea of regenerating all these 100% Previews in CS6 is NOT amusing. It is amazing that there is not a simple import function for this task as a way to make the software upgrade more "seamless"… but apparently there is not.
I have read the Adobe documents:
    "Bridge Help / Manage the cache | Adobe Bridge CS4, CS5"
    "Creative Suite / Work with the Adobe Bridge cache"
Based on these documents, in Bridge CS5 I used the export function in
Tools>Cache>Build and Export Cache…
    with "Build 100% Previews" checked
    and "Export Cache To Folders" checked.
Unfortunately, the "Build and Export Cache" fails to export 100% Previews to the target directory. They should appear in the target directory as hidden files in the format xxxxx.NEF.JPG. Yes, I do know how to view hidden files in both the Finder and in Bridge.
In Bridge CS5 I tried Purging and rebuilding the Cache for the target directory with no luck.
I tried running "Build and Export Cache" in Bridge CS6…. still no hidden Preview files in the target directory.
My settings in both CS5 & CS6 Bridge - Preferences:
    "Keep 100% Previews in Cache" is checked
    "Automatically Export Cache to Folders When Possible" is checked
My settings in both CS5 & CS6 Bridge - Options for thumbnail quality and preview generation:
    "Generate 100% Previews" is checked
Using OS X 10.6.8
Anyone have a suggestion?????

Bridge is the only piece of software I have used, which incorporates a database, where new versions do not provide for importing the objects of the older version. Very strange.
That is a very mildly conclusion but unfortunately until the cache strategy for Bridge is finally sorted out this problem will exist.
Now I have to confess that I can't use the 'Auto export cache when possible' for several versions now due to a rare problem that after the first time usage without problem created export cache almost every second time generates a warning message that due to failure it needs to replace the Cache T file, hence I deselected this option permanently.
I would think that if you have those already cached and exported files for 100 % preview in the dedicated folders it would read those files and add it to the database and central cache file when having pointed Bridge to that folder, but I'm far from sure about that.
Also after rereading your first post you state to expect the build and export cache to build also hidden files with the two extensions from original filetype followed by .jpg from cache in the folder itself (target directory)? Here I'm a bit lost. The mentioned double extension files only appear in the central cache folder and are visible but buried in the subfolders for each quality in the central cache file at user library (default) or custom set location in Bridge prefs.
The exported cache to folder are hidden files and as long as I can remember that where 2 files already in the File browser (forgot the extension they used for this) and currently .BridgeCache (very small, few KB) and the for me problematic .BridgeCacheT file that can grow very large and has about the same size as the subfolder generated under full in the central cache.
I can see the content of the central cache without problem including the double extensions and previews of the files as thumbs in the Finder, jet with option to show hidden files I can see the CacheT file but only as a blank document icon and I can't find an application on my system to open this file to reveal its content.
Just tried it on a folder with small sized files and having set preview quality to HQ and 100 % preview (checkerboard icon in Path Bar) and then used the option from menu tools to build and export cache to folder including 100 %. Both subfolder in Central Cache and about same sized hidden CacheT file where generated without problems and the full preview was instantly on demand using magnifier. (but all this without the option in prefs to auto export to folder)
So to me it seems (if I understand everything correctly) that either the existing exported files from CS5 do cause the problem or your setup of CS6 is not working correctly.
Are we still on the same track or am I completely lost?

How should i build and export a composition from After Effects to be dropped into a Premiere project

I've built a project in Premiere which i plan to burn to DVD. It's exporting at 1280x720. Pixel aspect ratio is 1.0. I'm exporting with MPEG2 setting.
After Effects won't let me make a project with 1.0 pixel aspect ratio, and it isn't letting me use MPEG2... it's giving me this medial 02 error...
Help!

Well where should I start? AE will allow you to use square pixels. In fact the 1280 X 720 frame size is the HDV/HDTV 720 P preset and it's square pixels.
You don't set the compression until you render and, if you want the highest quality, you don't render MPEG formats of any kind using the Render Cue, you export them using the Adobe Media encoder. Where is After Effects telling you you can't use MPEG2??? How are you trying to get there.
If you are going directly to Premiere Pro (Which only exports or renders using the Adobe Media Encoder) you don't even need to render, you can just import your AE Composition into PPro.
Secondly, A DVD is not High Def in any form. DVD's are all 720 X 480 pixles (in NTSC countries). The only options are widescreen or normal.
Please read the sections on Rendering in the help files.

PC build and Disk Setup for a Pro-Wannabe

Hi All,
I know everyone asks these questions and I thought I will not but, when you spend more than $3000 it feels their is no "Harm" in asking the question (but hopefully their will be Harm somewhere in the comments).
So, after waiting for the Mac Pro update for 2 years (just to fool myself that I may buy it), I have decided to move from the Mac OS to Windows after 4 years. I was only using a Macbook Pro to edit and feel now have the suitable experience to begin working on an actual machine.
If you ask my budget, I didn't have any so I went on a buying frenzy with my credit cards and will hopfully be driven to work harder to pay it off .
Here are the parts I have bought:
CPU - Intel 3930K (duh! I don't see a point in waiting for the 4th Gen)
Mobo - ASUS P9X79 Pro
RAM - GSkillz 32GB (8GBx4) @ 1600MHz 9-9-9 (as 3930K is limited to 1600MHz and 1.5V)
Will buy this same set around end of this year to make it 64GB if I feel AE would eat it.
Cabinet - CoolerMaster Storm Stryker (was buying HAF-XM but could not resist the looks of this).
PSU - Seasonic 860W Platinum Plus (Thought 1k is overkill and 750 not future proof, pricey though)
Storage (I thought I will get 1 cheap SSD and 1 Hybrid but then I read all the threads and went crazy)
Samsung 840 Pro SSD- 256GB - 2 nos.
Samsung 840 (nonPro) - 128GB - 2 nos.
Seagate 7200rpm HD - 2TB - 3 nos.
Monitor (just fyi) - Dell U2412 (planning to buy ASUS PA '13 or Dell Ultra '13 24" after few months)
.. finally GPU - Not bought yet
I ordered the ASUS GTX 680 4G as 780 was too costly
but then I read the actual successor to 680 is 770. So I cancelled my 680 but the seller still has not confirmed, just hoping they cancel. Then it turns out 770-4G is not yet sold in my country (am not from the US) so I may import from US (surprisingly importing from Amazon with duties costs the same as probable street price in my country). So I will mot probably buy a..
Gigabyte GTX 770 4G
So, Question 1> Any comments on the component list?
As I plan to build this on my own, have not thought of overclocking as I am not a geek and feel I should first get comfortable. Fair thought?
And hence I have not bought any additional Fans or Coolers.
And now for the Question 2> disk setup! Can you please fill the blanks or suggest alternatives.
This is what I have planned:
C: > Samsung 840 Pro 256GB : OS and _____ ??
D: > Samsung 840 Pro 256GB: Previews and Renders and/or ____ ??
E: > Samsung 840 128GB x 2 RAID-0 : Footage and ___ ?? (the 128GB version has slowest write speed so assigned it to footage)
F: > Seagate 2TB x 2 RAID-0 HDD : Exports and General Personal Files (like Docs, Music)
G: > Seagate 2TB : Dedicated solely as Backup Drive for crictical data at any time (which for me can be on any drive, that is why no RAID3/5 I feel)
And I plan to use my old external USB2/Firewire/USB3 external drives (500GB/1TB) for manual backups.
I can buy 1 or 2 more 2TBs (not SSDs) if it is really critical for some configuration but not anything more.
Usage: I shoot only DSLR footage and use PPro and AE CS6. I have till now been using a 2009 17" Macbook Pro with an SSD. And could have been spotted sometimes using a Class 6 SD Card on a USB 2 card reader being used as the Media drive (Ouch!). I feel (a) now I have the skill to justify this as many times I end up not implementing an idea in AE as my machine just won't budge and (b) I plan to buy the BlackMagic Pocket Camera to learn capabilities of RAW media. Like many I do hope to make an indie in the next 2 or 3 years but I hope I can employ services of a professional who should at least give me respect when he looks at my machine
If you have made it till here, thanks for your time. Waiting for your comments.
Cheers!
Ps: And yes I am planning to subscribe to CC as its cheap for a CS6 owner. And then after 1 year will judge if I will continue with CC once upgrade pricing goes (hopefully yes as I wait for an extensively GPU using AE version soon).

Regarding question #1, build list, and question #2 drive setup:
everything looks great except...
add a good cpu cooler; lots of good choices out there including but not limited to: budget: Cooler Master 212 EVO, high-performance air: Noctua NH-D14, simple liquid: Corsair H110, full water cooling: many options (full water cooling is a pain to plan and build, but ooooohhh so quiet!)
RAM: suggest go for 64GB at the onset rather than trying to add RAM later
definitely plan on overclocking - 4 Ghz is a walk in the park and very safe since you aren't totally comfortable with overclocking, and the performance gain is rather significant for renders, etc.
One SSD is plenty to get started - 256GB would be good for OS, programs, as well as providing some room for AE and photoshop caching
2 drives in RAID 0 would work pretty well for all projects, media, etc. If you really want to spend more in the drive area up the RAID to a 3 or 4 drive RAID
Suggest putting your backup drive in a hot-swap tray so you can remove it and provide off-site backup capability
Regards,
Jim

Desktop AIR app debug build running from cache?

I'm new to flash builder (using 4.5 for os x) and I've been working on a desktop AIR app for the last week. I've been running into a strange issue when deugging my app. Every once and a while (maybe 4-5 times a day) after I make changes to my code and I make a new debug build, a much older version of the app runs when I run the app with or without the debugger, or even if I export for release. It's as though its running (or building) from the cache, except I'm building a desktop app and I'm not testing the swf on a browser. I've turned off "Build Automatically", cleaned the project and build again but no changes are reflected. I can't figure out how, but after cleaning, quitting flash builder, restarting, cleaning, building again, etc.. numerous times suddenly I will see the current version of the app back up and running. I cannot for the life of me figure out how to quickly resolve the issue, or what exactly is fixing it. Every time it seems like something else triggers FB to refresh the build. I can even run the debugger and step through my current code while seeing completely different results on the screen.
Has anyone else run into this issue? Anyone know what I may be missing? Are there settings I need to change besides "Build Automatically"? Thanks for your help,
Nick

Thanks for the answer. How exactly Flash Builder is running is a little clearer to me now. I checked and the timestamps were indeed being updated correctly.
This helped me to look elsewhere for the issue. I actually now think it may have to do with mobile home sync that I have going through OS X. Whenever the sync runs, FB seems to launch an outdated (as in hours ago) version of the app. Despite the fact that the sync is not pulling in new files, it seems to be the issue. If i stop the sync I start seeing the current version of the app again when I run the debugger. So I think its just the OS causing my problem (although I still don't completely understand why exactly the issue would manifest itself in FB). Fortunately I can recreate the issue every time I run the sync, so the problem is consistent at least!
Thanks again for your help.

HD edited footage in FCP 5.1 to DVDSP 4 to "build and format" to where now?

97 minute movie shot with Sony's HDV-FX1, edited in FCP 5.1, exported to QuickTime movie, full quality, current settings. Imported into DVDSP 4.1, parsed, no problem, authored with HD settings, and built project. DSP produced a proper HDDVD_TS folder. With Apple DVD Player 4.6.5 on my duel 1.8 G5, this plays just fine.
With Toast 8 and a NU Technology Blu-ray burner (Matshita BD-MLT SW 5528), DVD-ROM (UDF), new disc, named and imported the HD file. Clicked record, selected 1x DB write speed to be on the safe side, used both a Panasonic BD-RW and a TDK BD-RW single layer disc and burned successfully. Neither disc now, to my ultimate frustration, will play in our Samsung Blu-ray DVD player or play with Apple's DVD Player. Both report a message about not supporting the media type, although the disc does mount on my G5 via the Blu-ray drive.
Thoughts on where to go from here? Our movie plays fine downconverted to 480i, but we would love to see it play in High def at 1080i.
Any thoughts would be much appreciated.
Larry
G5 Dual 1.8 Mac OS X (10.4.9) FCP 5.1 DVDSP 4.1

David,
That is the answer to why I am unable to use the "build and format" option in DSP? Seems crazy that the option is there, but the function isn't.
Did the Toast product manager give any hint as to when this option may be available? I knew were we sailing into unchartered waters, but we had hoped that by the time we were done with post that the path had already been navigated
Thanks,
Larry

Does adobe Premiere Pro CC edit and export 4k and higher video resolutions?

Hey Guys I am new the forum but have been using adobe products for years. I am having some problems finding if Adobe Premiere Pro CC effectively lets you edit and export video at 4k and higher. I am having a custom built computer to specifically handle high resolution output and video editing. I have a 5k monitor to go with it as we;;. Long story short is I need to make sure I can edit and export at full resolution. I am not interested in compressing the video output to 1080P from a 4k video input source. It would be a shame if I have to learn a completely new software program for my business because I have loved previous versions of the adobe premiere pro. any help with this would be greatly appreciated. I am expected to get my custom build back this afternoon. Thanks in advance for any help provided!

Yes

Why is printing report different from report builder and app server

I created a report and when ran from report builder it looks fine.
And when i moved the report to server and ran the report in the browser using this url
http://192.1.1.8:7778/reports/rwservlet?userid=esp/esp_dev1@wdev&report=FMMA_VOUCHER.rdf&destype=cache&desformat=pdf
and print it the report shrinks, the fonts become small and the margins change. I am having hard time how to figure out a way to correlate the formatting in the report builder and when i run on the server using pdf format.
Is there any way to set the server so that the pdf output matches with the report builder.
Thanks.
Sree

I assume you are doing a cross platform deployment
Pls read section 6.2
Resolving PDF Font Issues During Cross-Platform Deployment
in
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
[    All Docs for all versions    ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
---------------------------------------------------------------------------------

HT4236 I've run out of room on my hard drive. I bought an external drive and exported all my albums to the external drive then deleted the albums from iPhoto. I want to sync both from my ext drive and new albums in iPhoto. No dice. Help!

I've run out of room on my hard drive. I bought an external drive and exported all my albums to the external drive then deleted the albums from iPhoto. I want to sync both from my ext drive and new albums in iPhoto. My photos on the devices get wiped out when I sync to iPhoto since I deleted all the albums. But when I sync to my hard drive (where I maintained the album structure) the photos are copied to my iPad but lose all the hierarchy and folder structure. Now I have to scroll through thousands of photos to try to find the one I'm looking for. Before I sync any more devices I want to know the following: 1) can I restore the album structure on my iPad by using the photo cache? 2) is there a way to sync both new iPhoto albums AND pictures in the folders in my hard drive? And 3) how can I keep the photo hierarchy structure from my hard drive intact on my devices?

TigerMom28 wrote:
I've run out of room on my hard drive. I bought an external drive and exported all my albums to the external drive then deleted the albums from iPhoto.
Don't do that.
Copy /Photos/Photo library/ to the external.
Hold Option and launch iPhoto.
Select Choose library and select the Photo library you copied to the external.

Flash Builder + WTP = "Export Release Build" Broken

If I create a combined Flex/Java project and then click the "Export Release Build..." menu, then nothing appears to happen. If I just create a plain Flex project, then it works just fine.
I used the Eclipse Plug-in installer 4.0.1 (build 277662) for Windows XP SP3.
I am running the bundled 3.4.2 version of Eclpse and installed Subclipse and the WTP plugin.
I eventually looked through the Eclipse workspace log file and found the following stack trace. If anyone can offer me any suggestions on how to get this working I would appreciate it.
!ENTRY org.eclipse.ui 4 0 2010-11-11 15:54:01.577
!MESSAGE Unhandled event loop exception
!STACK 0
java.lang.NullPointerException
    at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionProjectAndLocati onPage.getDefaultOutputFolderPath(ExportReleaseVersionProjectAndLocationPage.java:485)
    at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionProjectAndLocati onPage.createLocationControls(ExportReleaseVersionProjectAndLocationPage.java:399)
    at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionProjectAndLocati onPage.createControl(ExportReleaseVersionProjectAndLocationPage.java:702)
    at org.eclipse.jface.wizard.Wizard.createPageControls(Wizard.java:170)
    at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.createPag eControls(ExportReleaseVersionWizard.java:471)
    at org.eclipse.jface.wizard.WizardDialog.createPageControls(WizardDialog.java:669)
    at org.eclipse.jface.wizard.WizardDialog.createContents(WizardDialog.java:543)
    at org.eclipse.jface.window.Window.create(Window.java:431)
    at org.eclipse.jface.dialogs.Dialog.create(Dialog.java:1089)
    at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction$1.run(Export ReleaseVersionAction.java:93)
    at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction.run(ExportRe leaseVersionAction.java:103)
    at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
    at org.eclipse.ui.internal.WWinPluginAction.runWithEvent(WWinPluginAction.java:229)
    at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionI tem.java:583)
    at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:500)
    at org.eclipse.jface.action.ActionContributionItem$6.handleEvent(ActionContributionItem.java :452)
    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3823)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3422)
    at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2384)
    at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2348)
    at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2200)
    at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:495)
    at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:288)
    at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:490)
    at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
    at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
    at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
    at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
    at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
Thanks,
Chris Ward

Hi
I was able to reproduce this issue with Eclipse 3.6 and burrito build.
When I create a flex/java project I am not able to export the release build and the null pointer exception occurs.
But when I create the flex/java project with remote object service as LCDS export worked fine.
Also export of normal project is worked fine. I raised a bug http://bugs.adobe.com/jira/browse/FB-29046 for the same
I am attaching the logs here
ENTRY org.eclipse.ui 4 0 2010-11-17 10:52:09.360
!MESSAGE Unhandled event loop exception
!STACK 0
java.lang.NullPointerException
at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionMainPageContent. getDefaultOutputFolderPath(ExportReleaseVersionMainPageContent.java:581)
at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionMainPageContent. createLocationControls(ExportReleaseVersionMainPageContent.java:282)
at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionMainPageContent. createControls(ExportReleaseVersionMainPageContent.java:193)
at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionProjectAndLocati onPage.createControl(ExportReleaseVersionProjectAndLocationPage.java:188)
at org.eclipse.jface.wizard.WizardDialog.updateForPage(WizardDialog.java:1226)
at org.eclipse.jface.wizard.WizardDialog.access$4(WizardDialog.java:1218)
at org.eclipse.jface.wizard.WizardDialog$6.run(WizardDialog.java:1207)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
at org.eclipse.jface.wizard.WizardDialog.showPage(WizardDialog.java:1205)
at org.eclipse.jface.wizard.WizardDialog.nextPressed(WizardDialog.java:894)
at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:426)
at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:624)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:234)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1053)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4066)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3657)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:825)
at org.eclipse.jface.window.Window.open(Window.java:801)
at org.eclipse.ui.internal.handlers.WizardHandler$Export.executeHandler(WizardHandler.java:9 8)
at org.eclipse.ui.internal.handlers.WizardHandler.execute(WizardHandler.java:274)
at org.eclipse.ui.internal.handlers.HandlerProxy.execute(HandlerProxy.java:293)
at org.eclipse.core.commands.Command.executeWithChecks(Command.java:476)
at org.eclipse.core.commands.ParameterizedCommand.executeWithChecks(ParameterizedCommand.jav a:508)
at org.eclipse.ui.internal.handlers.HandlerService.executeCommand(HandlerService.java:169)
at org.eclipse.ui.internal.handlers.SlaveHandlerService.executeCommand(SlaveHandlerService.j ava:241)
at org.eclipse.ui.internal.actions.CommandAction.runWithEvent(CommandAction.java:157)
at org.eclipse.ui.internal.actions.CommandAction.run(CommandAction.java:171)
at org.eclipse.ui.actions.ExportResourcesAction.run(ExportResourcesAction.java:116)
at org.eclipse.ui.actions.BaseSelectionListenerAction.runWithEvent(BaseSelectionListenerActi on.java:168)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionI tem.java:584)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:501)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java :411)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1053)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4066)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3657)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2640)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2604)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2438)
at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:671)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
Thanks and Regards
Swathi

Import and export of international address

Hello all,
I need help with the international address version. I want to import greek data to our system using the ELM, because of the duplicate check already in place in our ELM.
Has anybody experience with that?
Then I also need to export the international address again via a campaign with the channel data export. Is there an easy way to achieve this?
Or is it possible to configure the serach result list for accounts/contact persons that I can see and export the information there directly?
Thanks a lot for your help!
Regards Anne

Hi,
Right click on the DCs which you want to get in the IDE and select Create Inactive Project.
If it prompts for the dependencies select them.
Once this is done u will be able to see the project in the WD perspective.
Now right click on the DC and select Development Component -> Build .
then Development Component -> Deploy.
If its there are any errors related with hard references deploy those DCs first and try.
Regards
Ayyapparaj.

Import and export of a project.

Hi,
I want to know the steps of import and export of a project.
1.I am using DTR.
2.I selected a track, after that a SC.
3.There are a lot of DCs.
4.Now i am to select some DCs.
5.there are five DCs that makes an application.
Questions:
1.How i am to create the application in WD prespective??
2.After creation application in WD, how i am to deploy the application(with all DCs)??

Hi,
Right click on the DCs which you want to get in the IDE and select Create Inactive Project.
If it prompts for the dependencies select them.
Once this is done u will be able to see the project in the WD perspective.
Now right click on the DC and select Development Component -> Build .
then Development Component -> Deploy.
If its there are any errors related with hard references deploy those DCs first and try.
Regards
Ayyapparaj.

How to fill and export a table from a FM

Hi!
I'm using the function builder, and want to export a table which is filled in the FM.
This is from the header in my FM:
EXPORTING
*" VALUE(T_RESULT_EXPORT) LIKE ZT_RESULT STRUCTURE
*" ZTKG_RESULT
I have the parameter name for a table T_RESULT_EXPORT in the Export section. How can I fill the table with data? I get an compiler error saying "T_RESULT_EXPORT is not an internal table - the OCCURS n specification is missing".
All I want to do is filling my export table.

adding to the above,
if u want to still use it in export section.
declare ur
internal table like this.
data : T_RESULT_EXPORT LIKE ZT_RESULT occurs 0.
then
pass T_RESULT_EXPORT in the FM
rgds
anver
if hlped mark points

DSLR workflow for ideal render and export

I recently completed my first 5 minute project in Premiere Pro CS6 with great results. The source material is a Canon 7D, and I'm working with unconverted native files. Unfortunately, as the project had color-correction with Magic Bullet looks, filters like sharpening, and layers to "blur" certain elements on-screen, the initial compressed h264 export took nearly 7 hours.
A bit of research led me to realize I was better off exporting a "master" and converting outside of Premiere Pro. So, what would be the best way to proceed?
Should I render my timeline and then choose export with "match sequence settings" and "use previews"? Should I not pre-render and instead export only with "match sequence settings"? If I do pre-render and use previews, will the resulting quality be the same as if I render while exporting?
Or is there another way? Could I create preview files with ProRes and export to ProRes?
Thanks for helping out a thrilled PP convert.

A little primer on Preview files...(btw I think they are great when used as they are intended)
Preview files are caches of raw frames [with effects applied to them] that are encoded into the Native Editing format (eg DV, HDC, MPEG-Intra).
It's a little known fact that ANY Export format can be made into an editing format. When you make a new Sequence you just have to pop over to the Custom Tab to change to that video format. In general this isn't a good idea though. Why? Because most Export formats are not good Digital Intermediates (DI). By that I mean that repeatedly compressing and decompressing damages/degrades the footage or they are slow to decode and encode.
So, what format to choose? Formats like Avid DNxHD and Apple ProRes are great editing modes. They don't degrade over multiple generations very much and are relatively low on CPU power to decode and encode. There are lossless DI's out there too like UtLossless (which is free). At the other extreme are codecs that don't fair well to being used as a DI - like H.264/AVC. They are simply too CPU hungry for the task.
Don't misunderstand me - editing source AVC footage is fine because decode is waaaay easier than encode. It's just not practical because of the encode time.
So why use Preview files at all?
IF your effects (like Magic Bullet or Motion Stabilizer) takes a LONG time you only have to do the computation once. Work in the highest resolution you'll be using (eg 1920x1080p). After you have the preview files "rendered" Premiere Pro will use then instead in that section and you'll have nice smoooooooth editing.
You then are free to Export your final video to whatever format you want in whatever size you want. And because you chose a DI that isn't hard on the CPU to decode you pick up a TON of time vs having Magic Bullet recalculate the same thing over and over again for each output format/size/datarate. - Just make sure you check the "Use Previews" button otherwise they will be ignored.
Level 200 tips:
IF, and this is a big IF, you happen to be exporting your final video at the same
    FRAME SIZE
    FRAME RATE
    COMPRESSION SETTINGS THAT MATCH THE EDITING MODE
Then, you can get an extra Encode time boost for Exporters that support "Smart Rendering". Smart Rendering is when all the above conditions are true and the compression scheme supports being able to COPY the preview frame instead of de-compressing it and then re-compressing it.
Basically there is little to no chance that's gonna happen unless your final output is a Digital Intermediate format to then go onto some other post-production step.
So... choose a good Editing Mode that doesn't lose quality when encoded (during the preview render) then decoded (during the early phase of Exporting each frame) to make the raw uncompressed frame that is Encoded into your final output format (eg F4V, AVC for Bluray, YouTube, Vimeo etc).
'hope that helps.
Rallymax.

SQL server 2012 Import and Export Wizard missing Flat File Options

When using either the 32 or 64 bit Import & Export wizard selecting data source "flat file source" no options appear, compared to excel import , sql or another data source ? tried uninstalling etc, build a VM 2008
Server works fine options appear. Any sugguestions before I rebuild my laptop ?
Stage that the Next button is optional, (usually greyed out)
TITLE: SQL Server Import and Export Wizard
The operation could not be completed.
ADDITIONAL INFORMATION:
The server name is not specified. (DTSWizard)
BUTTONS:
OK
Microsoft.SqlServer.Management.UI.WizardFrameworkErrorSR

Hi mtech,
When I open Import and Export Data(64-bit), I choose “flat file source”.
Maybe you could try to reinstall it.
If you have any feedback on our support, please click
here.
Thanks.
Maggie Luo
TechNet Community Support

Build and Export Cache

Similar Messages

Maybe you are looking for