Build Application Error

I am consistently getting an Error 26071 when I try to build my application to make an .EXE. I am usling LV6.1, and Application Builder for it. The app. works just fine from within LV itself. There are no errors.
Specifically, the error message is "Error 26071 occurred at Build Application.vi >> Dist Call Create Installer.vi >> Win Install Create.vi >> Win Install Add Files.vi >> MSI DK Add Shortcut.vi", with possible reasons stated as "Windows GetCommError: The hex value if the code us x65D7".
This code used to build just fine before I added some code using the Winevent.llb library, retrieved from NI. I had done a mass recompile on it and my code, just in case there was LV version compatibility issues. I also copied the specific vi's from Winevent into my library and did another mass compile, to no avail. I am using VISA serial port vi's (the GetCommError made me think this might be related).
Any ideas on what I'm doing wrong or what I'm missing?
Jeff

Check out this knowledge base here and let me know if that helps solve your issue.
Tyler H.
National Instruments

Similar Messages

Build application erroration Error 7

Could anyone kindly help me here, I have met "Error 7 occurred at Invoke Node in Dist Build App from LLB.vi->Dist Build App Image.vi->Build Application.vi" while I am using Labview 7.1 to build my exe installer for my customer. I encountered this error message twice during that process. The first time it when I launch build DLL and the second time is at build. After I press continue button, builder stops with no warning and error.
Thanks in advance
Willy

Hi Willy,
can you tell me if all of your VIs are made with the same LabVIEW Version 7.1 or is it possible that some were built in a previous version?
The Application Builder reads certain information from the VI in order to determine how to build the executable. Since there can be significant differences between two versions of LabVIEW, the build process may fail with an error similar to the one you mentioned.
You can convert your VIs to the most recent version by using the Mass Compile featurel. The Mass Compile feature will allow you to select either a directory or a LabVIEW .llb file to compile.
Hope that helps,
Stefan Henke
NIG

I m unable to execute a Imaqdx.vi present in Imaqdx.llb Which does nt allowing me 2 build application Options

Following error message has been generated while building application Error 1502 occurred at AB_Source_VI.lvclass:Close_Reference.vi -> AB_Build.lvclassave.vi -> AB_Build.lvclass:Copy_Files.vi -> AB_Application.lvclass:Copy_Files.vi -> AB_EXE.lvclass:Copy_Files.vi -> AB_Build.lvclass:Build.vi -> AB_Application.lvclass:Build.vi -> AB_EXE.lvclass:Build.vi -> AB_Engine_Build.vi -> AB_Build_Invoke.vi -> AB_Build_Invoke.vi.ProxyCaller
How can I Resolve this problem

CAR 328824 has been filed to address this issue in a future release. In the meantime, make sure that the option "Remove unused members of project libraries" is enabled in the build specifications, under Additional Exclusions. That should fix the issue.
-Christophe

I m unable to execute a Imaqdx.vi present in Imaqdx.llb Which does nt allowing me 2 build application

Following error message has been generated while building application
Error 1502 occurred at AB_Source_VI.lvclass:Close_Reference.vi -> AB_Build.lvclassave.vi -> AB_Build.lvclass:Copy_Files.vi -> AB_Application.lvclass:Copy_Files.vi -> AB_EXE.lvclass:Copy_Files.vi -> AB_Build.lvclass:Build.vi -> AB_Application.lvclass:Build.vi -> AB_EXE.lvclass:Build.vi -> AB_Engine_Build.vi -> AB_Build_Invoke.vi -> AB_Build_Invoke.vi.ProxyCaller
How can I Resolve this problem

CAR 328824 has been filed to address this issue in a future release. In the meantime, make sure that the option "Remove unused members of project libraries" is enabled in the build specifications, under Additional Exclusions. That should fix the issue.
-Christophe

Error 1003 occurred at Open VI Reference in Dist Copy Non-VI Files.vi- Dist Build LLB Image.vi- Dist Build App Image.vi- Build Application.vi

When trying to build an application using labview 7.1 and windows XP, I get the error
Error 1003 occurred at Open VI Reference in Dist Copy Non-VI Files.vi->Dist Build LLB Image.vi->Dist Build App Image.vi->Build Application.vi
I've tried the crtl-shift-run as well as a mass compile and I still get the error.
Any ideas?
Thanks,
Mike

Hopefully this thread, or this KB article might help.
It seems like this could come from a lot of things, but there's suggestions in those which might lead you in the right direction
Message Edited by Day on 09-22-2006 02:07 PM

Report builder error after applying sql server 2008R2 SP3 when click on report builder gives error like 'Application validation did not succeed. Unable to continue.

Hi All,
I applied SQL server 2008 R2 SP3 recently but report builder doesn't work since then
When click on report builder gives error like 'Application validation did not succeed. Unable to continue.
and when I try to see details the error summary like following:
+File, Microsfot.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
this is urgent.
Please reply me asap.
thanks a lot in advance.
Regards,
Nik
Regards, Naman

Hi nikp11,
According to your description, you recently updated SQL Server 2008 R2 to SP3, Report Builder doesn’t work since then the error occurs: "Application validation did not succeed. Unable to continue".
This is an known issue in SSRS 2008 R2 SP3 that Microsoft has published an article addressing this issue. It is not planning to release a fix for this issue. But we could implement one of the following workarounds:
Install and run Report Builder 3.0 of SQL Server 2008 R2 RTM.
Install and run Report Builder of SQL Server 2014.
Uninstall Service Pack 3 then uninstall Service Pack 2 and then reinstall Service Pack 3.
Reference:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch
Thank you for your understanding.
Best Regards,
Wendy Fu

Why does Build Application vi work in development environment but not in executable; error 1025

Hello,
I have an application ("A") that I am trying to build using another application ("BuildA").
I can create an application for A manually from its project using the Build Specification, and it works fine (A.exe).
Also, when I run BuildA.vi in the development environment it calls the "Build.vi" correctly and again builds application A.exe just fine.
Then, when I make BuildA an application (manually) and run BuildA.exe, I would expect it to also create A.exe just like BuildA.vi did in the development environment.
However, it fails with the error:
Code: 1025
Open VI Reference in NI_App_Builder_API.lvlib:Build (path).vi->BuildA.vi<APPEND>
VI Path: <b>C:\TEMP\AppBuild\BuildA\vi.lib\AppBuilder\BuildTarget.vi</b>
I noticed this thread , which looks like a similar problem, but no conclusion was reached.
Why does BuildA.vi work fine in the LabVIEW environment, but the application BuildA.exe does not work? All paths are hard-coded, so it shouldn't be a path issue.
Thanks,
-john
Solved!
Go to Solution.
Attachments:
AppBuild.zip ‏175 KB

Interesting code. I'm curious how you came to decide 324ms in your while loop, and 58 in the other, and then 5136ms at the end. In any case I suspect this has to do with this line of text in the help of the Build.vi.
If you plan to run a build specification on the LabVIEW Run-Time Engine, do not include the Build VI in any of the VIs for the build specification.
I don't fully know what this means but it might be why it isn't working.
The Build.vi opens all Context (application instances) and then looks for the one named "NI.LV.MxLvProvider". This I assume is a application instance NI uses to build applications. It then uses this and opens some other VIs in this instance for the building. The error you are getting is "Application Reference is invalid" meaning it couldn't find the NI.LV.MxLvProvider instance it needs to build. Again I believe this maybe because you are in a run-time environment and that instance doesn't exist there.
At the end of the day I'm guessing since Application Builder is not free, NI probably doesn't include it in the Run-Time engine, which is free. So you can't build the way you want. You could have and EXE running in the run-time open an instance in the development, then run your VI from there if you must make this an EXE. It maybe easier to just edit the BuildA.vi to have a "Run When Opened" so that you double click the VI and it runs which behaves like an EXE sorta.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Error when starting DPS App Builder - Application not found

WTF folks.
This morning I open my document (CS5) and it says I have to update my folio tools (needless to say i hate it to be forced to do an update before I can start working).
Well, I do an update, both tools (Folio Builder and Producer Tools).
Now there seem to be some changes, I cant refresh my folio via menu anymore. When choosing the new "build app"-option I get an error :
"An error occured while starting DPS App Builder. The DPS App-Builder Application was not found" (translated).
German original version: "Beim Starten von DPS App Builder ist ein Fehler aufgetreten. Die DPS App Builder-Anwendung wurde nicht gefunden."
Any Solutions? Where to get the mysterious "App-Builder Application?"
edit: refresh is now only possible inside the folio it seems.

App Builder is nothing but a new name to Viewer Builder. Download it from DPS Dashbaord.

Error during build application

Software - Labview 7.1 PDA and Labview DSC 7.1
OS - WIndows XP.
When I try to build application in Labview 7.1 I get following error
"Error 7 occured at Build Application. vi >> Disk Cmp setting to disk hier.vi >> Dist report Read Link Error.vi."
Can anyone had idea why this error had come.
Regards
Uttam

Hi,
Try mass compiling your VI once before building the EXE
Tools»Advanced»Mass Compile
this link will explain how to mass compile.
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/aa97c01071d7cf678625695100582f40?O...
Hope this helps
Regards
Dev

Error 1430 While Building Application

I receive the following error when trying to build an applications Build Specifications:
Error 1430 occurred at Create Folder in Create Directory Recursive.vi->AB_Destination.lvclass:Create_Destination.vi->AB_Build.lvclass:Create_Destinations.vi->AB_Application.lvclass:Create_Destinations.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: The path is empty or relative. You must use an absolute path.
<Not A Path>
Any Ideas?
Solved!
Go to Solution.

This was reported to R&D (# 156236) for further investigation. It is generally a result of including a subVI that is stored on a network drive. If you are building an executable, you can try checking the Use LabVIEW 8.x file layout option under the Advanced category. If you are building a source distribution, make sure the Preserve disk hierarchy option is not checked under the Destinations category.
Let me know if any of this information resolves the issue.
Alex Person
NI-RIO Product Support Engineer
National Instruments

Error 1003 when loading subpanel VI in build application (VI not executable)

Error 1003 loading subpanel VI in build application (VI not executable). I referenced all supanel VI callers in my build app. What am I missing?

Thanks for your reply!! I tried a few things I found online including the article you posted...this unfortunately did not solve my problem. Through some trial and error process I found the issue was with my build properties in the advanced section shown below.
I had to check LabVIEW8.x file layout to allow the subpanel VI to load into my main app. I didn't think to check this cuz my code was developed in version 2010. I'm guesssing some of the callers where originally created in older versions and needed the the LabVIEW8 file layout, even though all my source code is compiled in version 10. If you think I might be wrong on this assumption let me know.
P

Error when building application with Excel included

Hi All !
I've read several post on problems with Report Generation Toolkit when building applications that uses Excel or Word interactivity.
I've included both _Excel Dynamic VIs.vi and _Word Dynamic VIs.vi in my project and added them to the dynamic vis and support files.
When building I get the error :
The VI is broken. Open the VI in LabVIEW and fix the errors.
C:\Programmer\National Instruments\LabVIEW 8.2\vi.lib\addons\_office\_exclsub.llb\_Excel Dynamic VIs.vi
When opening that VI there is no broken arrow and all the vi's included in this is not broken either.
I've tried mass compiling and so on but so far luck.
Regards Morten Kahr
Regards Kahr
Certified LabVIEW Architect
CIM A/S

If you do a search on this forum you will find this to be a common and vexing problem. I myself had this same exact problem about a year ago, and it took me the better part of a day to track it down. As you will find by reading the various threads on this problem, there seems to be no specific cause for this, and it remains a mystery, and the solutions are no better than chanting voodoo, and probably just as effective.
One thing you can try is to force a recompile of your VI hierarchy. Open you top-level VI. If it's set up to run when opened, stop it. Hold down the Control key and click the run button. This will force a recompile of the application. Sometimes this works, sometimes it doesn't. Like I said, voodoo.
Another thing to look for is to check if you are using any diagram disable structures or case structures with a constant wired, as in trying to use the case structure to comment out code.
Are you using classes and passing by reference? There was a mention of this here.

Error in XML form builder application

Hi SDN,
I have created a form builder application. I am able to create items from the application. But when i try to edit or delete the item...From the edit option if I try to save or preview or cancel or reset ....it is throwing the following error message
Runtime Error
An exception occured while processing the request.
Additional information: Exception during PageProcessorComponent.doContent()
Exception ID = a0d623c1-d35e-2b10-8ab7-f6c10479e59b
How to rectify the following issue....
Regards,
Ganesh N

Hi,
I have also encountered this problem the first time I did XML form builder.
A simple restart of my portal solved the problem.
Fabien.

Forms Builder 6i Application Error

Hi! I'm just creating a Record Group when this error shows up:
The instruction at "0x634c052b" referenced memory at "0x000000000" the memory could not be written.
It's not a FRM nor an ORA error, it just says "ifbld60 Application error" then shut downs the Forms Builder...
I'm using Forms Builder 6.0.5.32.0 and here's my query to my supposedly record group:
SELECT DECODE(first_name,NULL,'',' ') ||first_name||
middle_initial||DECODE(middle_initial,NULL,'',' ') || last_name||DECODE(last_name,NULL,'',' ')||
name_suffix,
gmm_id
FROM TABLE_CONTACTS,
TABLE_EMPLOYEE
WHERE emp_id = employee_id
ORDER BY first_name
(after clicking ok to create the record group, the error pops up.)
---- if u got any insight about this, or encountered the same error, pls. reply
Thanks!

Hi!
Forms help says you must select two chars in order to create record_group in a way you do. So convert gmm_id into to_char (gmm_id). This will probably help.
Sergey.

Application error happening at least twice a day. Faulting applicaiton name: wmiprvse.exe

We're experiencing an issue with one of our Windows Server 2008R2 Standard Edition SP1 servers where an Application error occurs at least twice, and sometimes up to 5 or 6 times per day. The following error is what we see. Any help would be greatly
appreciated, and I'll be checking back frequently to check for updates and provide more info whenever needed. Thanks!
General:
Faulting application name: wmiprvse.exe, version: 6.1.7601.17514, time stamp: 0x4ce79d42
Faulting module name: ntdll.dll, version: 6.1.7601.17514, time stamp: 0x4ce7c8f9
Exception code: 0xc0000374
Fault offset: 0x00000000000c40f2
Faulting process id: 0x1bbc
Faulting application start time: 0x01cd5d65dbeb2e7c
Faulting application path: C:\Windows\system32\wbem\wmiprvse.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2012-07-09T08:34:39.000000000Z
EventRecordID
6812
Channel
Application
Computer
{FQDN}
Security
EventData
wmiprvse.exe
6.1.7601.17514
4ce79d42
ntdll.dll
6.1.7601.17514
4ce7c8f9
c0000374
00000000000c40f2
1bbc
01cd5d65dbeb2e7c
C:\Windows\system32\wbem\wmiprvse.exe
C:\Windows\SYSTEM32\ntdll.dll
ebe1621c-c9a0-11e1-a1d4-5cf3fce8cef6
ETA: I also ran the wmidiag.exe tool from Microsoft. I saw it as a suggestion on another forum and ran it. I don't know if it has any bearing here, but this is the log in case it's helpful
show
06604 14:51:25 (0) ** WMIDiag v2.1 started on Tuesday, July 10, 2012 at 14:40.
06605 14:51:25 (0) **
06606 14:51:25 (0) ** Copyright (c) Microsoft Corporation. All rights reserved - July 2007.
06607 14:51:25 (0) **
06608 14:51:25 (0) ** This script is not supported under any Microsoft standard support program or service.
06609 14:51:25 (0) ** The script is provided AS IS without warranty of any kind. Microsoft further disclaims all
06610 14:51:25 (0) ** implied warranties including, without limitation, any implied warranties of merchantability
06611 14:51:25 (0) ** or of fitness for a particular purpose. The entire risk arising out of the use or performance
06612 14:51:25 (0) ** of the scripts and documentation remains with you. In no event shall Microsoft, its authors,
06613 14:51:25 (0) ** or anyone else involved in the creation, production, or delivery of the script be liable for
06614 14:51:25 (0) ** any damages whatsoever (including, without limitation, damages for loss of business profits,
06615 14:51:25 (0) ** business interruption, loss of business information, or other pecuniary loss) arising out of
06616 14:51:25 (0) ** the use of or inability to use the script or documentation, even if Microsoft has been advised
06617 14:51:25 (0) ** of the possibility of such damages.
06618 14:51:25 (0) **
06619 14:51:25 (0) **
06620 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06621 14:51:25 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
06622 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06623 14:51:25 (0) **
06624 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06625 14:51:25 (0) ** Windows Server 2008 R2 - Service pack 1 - 64-bit (7601) - User {Username} on computer {ComputerName}.
06626 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06627 14:51:25 (0) ** Environment: ........................................................................................................ OK.
06628 14:51:25 (0) ** System drive: ....................................................................................................... C: (Disk #0 Partition #1).
06629 14:51:25 (0) ** Drive type: ......................................................................................................... SCSI (IBM ServeRAID M5015 SCSI Disk Device).
06630 14:51:25 (0) ** There are no missing WMI system files: .............................................................................. OK.
06631 14:51:25 (0) ** There are no missing WMI repository files: .......................................................................... OK.
06632 14:51:25 (0) ** WMI repository state: ............................................................................................... CONSISTENT.
06633 14:51:25 (0) ** AFTER running WMIDiag:
06634 14:51:25 (0) ** The WMI repository has a size of: ................................................................................... 90 MB.
06635 14:51:25 (0) ** - Disk free space on 'C:': .......................................................................................... 75295 MB.
06636 14:51:25 (0) ** - INDEX.BTR, 15818752 bytes, 7/10/2012 2:38:58 PM
06637 14:51:25 (0) ** - MAPPING1.MAP, 242388 bytes, 7/10/2012 2:33:33 PM
06638 14:51:25 (0) ** - MAPPING2.MAP, 242388 bytes, 7/10/2012 2:38:58 PM
06639 14:51:25 (0) ** - OBJECTS.DATA, 77570048 bytes, 7/10/2012 2:38:58 PM
06640 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06641 14:51:25 (2) !! WARNING: Windows Firewall: .......................................................................................... DISABLED.
06642 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06643 14:51:25 (0) ** DCOM Status: ........................................................................................................ OK.
06644 14:51:25 (0) ** WMI registry setup: ................................................................................................. OK.
06645 14:51:25 (0) ** INFO: WMI service has dependents: ................................................................................... 1 SERVICE(S)!
06646 14:51:25 (0) ** - Internet Connection Sharing (ICS) (SHAREDACCESS, StartMode='Disabled')
06647 14:51:25 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
06648 14:51:25 (0) ** Note: If the service is marked with (*), it means that the service/application uses WMI but
06649 14:51:25 (0) ** there is no hard dependency on WMI. However, if the WMI service is stopped,
06650 14:51:25 (0) ** this can prevent the service/application to work as expected.
06651 14:51:25 (0) **
06652 14:51:25 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
06653 14:51:25 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
06654 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06655 14:51:25 (0) ** WMI service DCOM setup: ............................................................................................. OK.
06656 14:51:25 (0) ** WMI components DCOM registrations: .................................................................................. OK.
06657 14:51:25 (0) ** WMI ProgID registrations: ........................................................................................... OK.
06658 14:51:25 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
06659 14:51:25 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
06660 14:51:25 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
06661 14:51:25 (2) !! WARNING: Some WMI providers EXE/DLL file(s) are missing: ............................................................ 18 WARNING(S)!
06662 14:51:25 (0) ** - ROOT/QLOGIC_CMPI, QLogic_NIC_Provider, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{28A5F598-F699-4A6B-B9F9-8C7EB9B7359F}:QLogic_NIC_Provider
06663 14:51:25 (0) ** - ROOT/QLOGIC_CMPI, QLogic_FCHBA_Provider, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{0AE588DD-D2E9-41EB-BCD1-8BF474187EC5}:QLogic_FCHBA_Provider
06664 14:51:25 (0) ** - ROOT/IBMSD, ADPT_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{B007445E-6AF0-4CBD-9009-809F071FCE69}:ADPT_Module
06665 14:51:25 (0) ** - ROOT/IBMSD, IBM_PA_Providers, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{2244E0FA-D37A-4F6E-82FB-92F1DB78716D}:IBM_PA_Providers
06666 14:51:25 (0) ** - ROOT/IBMSD, EndpointRegistrationProviderModule, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{BF833E81-33AA-40ED-B74A-329F006DB4F8}:EndpointRegistrationProviderModule
06667 14:51:25 (0) ** - ROOT/CIMV2, SBLIM_Data_Gatherer, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{0D03AF80-A160-44EF-9E8B-318201F41693}:SBLIM_Data_Gatherer
06668 14:51:25 (0) ** - ROOT/ADPT, ADPT_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{B007445E-6AF0-4CBD-9009-809F071FCE69}:ADPT_Module
06669 14:51:25 (0) ** - ROOT/PG_INTEROP, SBLIM_Data_Gatherer, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{0D03AF80-A160-44EF-9E8B-318201F41693}:SBLIM_Data_Gatherer
06670 14:51:25 (0) ** - ROOT/PG_INTEROP, LSIESG_SMIS13_HHR_ProviderModule, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{E21064DD-757A-4F2D-B798-81CDFF03B48C}:LSIESG_SMIS13_HHR_ProviderModule
06671 14:51:25 (0) ** - ROOT/PG_INTEROP, emulex_fc_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{27734403-1E6C-4BC7-B97D-1FE9657B35EC}:emulex_fc_provider_Module
06672 14:51:25 (0) ** - ROOT/PG_INTEROP, emulex_ucna_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{68D3C192-F517-41CC-B852-BA74A8D05A85}:emulex_ucna_provider_Module
06673 14:51:25 (0) ** - ROOT/IBMSE, emulex_fc_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{27734403-1E6C-4BC7-B97D-1FE9657B35EC}:emulex_fc_provider_Module
06674 14:51:25 (0) ** - ROOT/IBMSE, IBM_PA_Providers, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{2244E0FA-D37A-4F6E-82FB-92F1DB78716D}:IBM_PA_Providers
06675 14:51:25 (0) ** - ROOT/IBMSE, emulex_ucna_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{68D3C192-F517-41CC-B852-BA74A8D05A85}:emulex_ucna_provider_Module
06676 14:51:25 (0) ** - ROOT/LSI_MR_1_3_0, LSIESG_SMIS13_HHR_ProviderModule, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{E21064DD-757A-4F2D-B798-81CDFF03B48C}:LSIESG_SMIS13_HHR_ProviderModule
06677 14:51:25 (0) ** - ROOT/EMULEX, emulex_fc_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{27734403-1E6C-4BC7-B97D-1FE9657B35EC}:emulex_fc_provider_Module
06678 14:51:25 (0) ** - ROOT/EMULEX, emulex_ucna_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{68D3C192-F517-41CC-B852-BA74A8D05A85}:emulex_ucna_provider_Module
06679 14:51:25 (0) ** - ROOT/BROCADE, brcdprovider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{48898EFD-0F9A-4657-B03D-FF400A7D2CDE}:brcdprovider_Module
06680 14:51:25 (0) ** => This will make any operations related to the WMI class supported by the provider(s) to fail.
06681 14:51:25 (0) ** This can be due to:
06682 14:51:25 (0) ** - the de-installation of the software.
06683 14:51:25 (0) ** - the deletion of some files.
06684 14:51:25 (0) ** => If the software has been de-installed intentionally, then this information must be
06685 14:51:25 (0) ** removed from the WMI repository. You can use the 'WMIC.EXE' command to remove
06686 14:51:25 (0) ** the provider registration data.
06687 14:51:25 (0) ** i.e. 'WMIC.EXE /NAMESPACE:\\ROOT\BROCADE path __Win32Provider Where Name='brcdprovider_Module' DELETE'
06688 14:51:25 (0) ** => If not, you must restore a copy of the missing provider EXE/DLL file(s) as indicated by the path.
06689 14:51:25 (0) ** You can retrieve the missing file from:
06690 14:51:25 (0) ** - A backup.
06691 14:51:25 (0) ** - The Windows CD.
06692 14:51:25 (0) ** - Another Windows installation using the same version and service pack level of the examined system.
06693 14:51:25 (0) ** - The original CD or software package installing this WMI provider.
06694 14:51:25 (0) **
06695 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06696 14:51:25 (0) ** INFO: User Account Control (UAC): ................................................................................... DISABLED.
06697 14:51:25 (0) ** INFO: Local Account Filtering: ...................................................................................... ENABLED.
06698 14:51:25 (0) ** => WMI tasks remotely accessing WMI information on this computer and requiring Administrative
06699 14:51:25 (0) ** privileges MUST use a DOMAIN account part of the Local Administrators group of this computer
06700 14:51:25 (0) ** to ensure that administrative privileges are granted. If a Local User account is used for remote
06701 14:51:25 (0) ** accesses, it will be reduced to a plain user (filtered token), even if it is part of the Local Administrators group.
06702 14:51:25 (0) **
06703 14:51:25 (0) ** Overall DCOM security status: ....................................................................................... OK.
06704 14:51:25 (0) ** Overall WMI security status: ........................................................................................ OK.
06705 14:51:25 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
06706 14:51:25 (0) ** INFO: WMI permanent SUBSCRIPTION(S): ................................................................................ 2.
06707 14:51:25 (0) ** - ROOT/SUBSCRIPTION, CommandLineEventConsumer.Name="BVTConsumer".
06708 14:51:25 (0) ** 'SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99'
06709 14:51:25 (0) ** - ROOT/SUBSCRIPTION, NTEventLogEventConsumer.Name="SCM Event Log Consumer".
06710 14:51:25 (0) ** 'select * from MSFT_SCMEventLogEvent'
06711 14:51:25 (0) **
06712 14:51:25 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
06713 14:51:25 (0) ** INFO: WMI namespace(s) requiring PACKET PRIVACY: .................................................................... 3 NAMESPACE(S)!
06714 14:51:25 (0) ** - ROOT/CIMV2/SECURITY/MICROSOFTTPM.
06715 14:51:25 (0) ** - ROOT/CIMV2/TERMINALSERVICES.
06716 14:51:25 (0) ** - ROOT/SERVICEMODEL.
06717 14:51:25 (0) ** => When remotely connecting, the namespace(s) listed require(s) the WMI client to
06718 14:51:25 (0) ** use an encrypted connection by specifying the PACKET PRIVACY authentication level.
06719 14:51:25 (0) ** (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
06720 14:51:25 (0) ** i.e. 'WMIC.EXE /NODE:"{ComputerName}" /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\SERVICEMODEL Class __SystemSecurity'
06721 14:51:25 (0) **
06722 14:51:25 (0) ** WMI MONIKER CONNECTIONS: ............................................................................................ OK.
06723 14:51:25 (0) ** WMI CONNECTIONS: .................................................................................................... OK.
06724 14:51:25 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 30 ERROR(S)!
06725 14:51:25 (0) ** - Root/CIMV2, MSFT_NetInvalidDriverDependency, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06726 14:51:25 (0) ** MOF Registration: ''
06727 14:51:25 (0) ** - Root/CIMV2, Win32_OsBaselineProvider, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06728 14:51:25 (0) ** MOF Registration: ''
06729 14:51:25 (0) ** - Root/CIMV2, Win32_OsBaseline, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06730 14:51:25 (0) ** MOF Registration: ''
06731 14:51:25 (0) ** - Root/CIMV2, Win32_DriverVXD, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06732 14:51:25 (0) ** MOF Registration: ''
06733 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06734 14:51:25 (0) ** MOF Registration: ''
06735 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06736 14:51:25 (0) ** MOF Registration: ''
06737 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06738 14:51:25 (0) ** MOF Registration: ''
06739 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06740 14:51:25 (0) ** MOF Registration: ''
06741 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06742 14:51:25 (0) ** MOF Registration: ''
06743 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06744 14:51:25 (0) ** MOF Registration: ''
06745 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06746 14:51:25 (0) ** MOF Registration: ''
06747 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06748 14:51:25 (0) ** MOF Registration: ''
06749 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06750 14:51:25 (0) ** MOF Registration: ''
06751 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06752 14:51:25 (0) ** MOF Registration: ''
06753 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06754 14:51:25 (0) ** MOF Registration: ''
06755 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06756 14:51:25 (0) ** MOF Registration: ''
06757 14:51:25 (0) ** - Root/WMI, ReserveDisjoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06758 14:51:25 (0) ** MOF Registration: ''
06759 14:51:25 (0) ** - Root/WMI, ReserveLateCount, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06760 14:51:25 (0) ** MOF Registration: ''
06761 14:51:25 (0) ** - Root/WMI, ReserveJoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06762 14:51:25 (0) ** MOF Registration: ''
06763 14:51:25 (0) ** - Root/WMI, ReserveDelete, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06764 14:51:25 (0) ** MOF Registration: ''
06765 14:51:25 (0) ** - Root/WMI, ReserveBandwidth, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06766 14:51:25 (0) ** MOF Registration: ''
06767 14:51:25 (0) ** - Root/WMI, ReserveCreate, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06768 14:51:25 (0) ** MOF Registration: ''
06769 14:51:25 (0) ** - Root/WMI, SystemConfig_PhyDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06770 14:51:25 (0) ** MOF Registration: ''
06771 14:51:25 (0) ** - Root/WMI, SystemConfig_Video, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06772 14:51:25 (0) ** MOF Registration: ''
06773 14:51:25 (0) ** - Root/WMI, SystemConfig_IDEChannel, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06774 14:51:25 (0) ** MOF Registration: ''
06775 14:51:25 (0) ** - Root/WMI, SystemConfig_NIC, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06776 14:51:25 (0) ** MOF Registration: ''
06777 14:51:25 (0) ** - Root/WMI, SystemConfig_Network, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06778 14:51:25 (0) ** MOF Registration: ''
06779 14:51:25 (0) ** - Root/WMI, SystemConfig_CPU, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06780 14:51:25 (0) ** MOF Registration: ''
06781 14:51:25 (0) ** - Root/WMI, SystemConfig_LogDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06782 14:51:25 (0) ** MOF Registration: ''
06783 14:51:25 (0) ** - Root/WMI, SystemConfig_Power, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06784 14:51:25 (0) ** MOF Registration: ''
06785 14:51:25 (0) ** => When a WMI performance class is missing (i.e. 'Win32_PerfRawData_TermService_TerminalServices'), it is generally due to
06786 14:51:25 (0) ** a lack of buffer refresh of the WMI class provider exposing the WMI performance counters.
06787 14:51:25 (0) ** You can refresh the WMI class provider buffer with the following command:
06788 14:51:25 (0) **
06789 14:51:25 (0) ** i.e. 'WINMGMT.EXE /SYNCPERF'
06790 14:51:25 (0) **
06791 14:51:25 (0) ** WMI MOF representations: ............................................................................................ OK.
06792 14:51:25 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
06793 14:51:25 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
06794 14:51:25 (2) !! WARNING: WMI EXECQUERY operation errors reported: ................................................................... 2 WARNING(S)!
06795 14:51:25 (0) ** - Root/CIMV2, 'Select * From Win32_PointingDevice WHERE Status = "OK"' did not return any instance while AT LEAST 1 instance is expected.
06796 14:51:25 (0) ** - Root/CIMV2, 'Select * From Win32_Keyboard' did not return any instance while AT LEAST 1 instance is expected.
06797 14:51:25 (0) **
06798 14:51:25 (2) !! WARNING: WMI GET VALUE operation errors reported: ................................................................... 5 WARNING(S)!
06799 14:51:25 (0) ** - Root, Instance: __EventConsumerProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
06800 14:51:25 (0) ** - Root, Instance: __EventProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
06801 14:51:25 (0) ** - Root, Instance: __EventSinkCacheControl=@, Property: ClearAfter='00000000000015.000000:000' (Expected default='00000000000230.000000:000').
06802 14:51:25 (0) ** - Root, Instance: __ObjectProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
06803 14:51:25 (0) ** - Root, Instance: __PropertyProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
06804 14:51:25 (0) **
06805 14:51:25 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
06806 14:51:25 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
06807 14:51:25 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
06808 14:51:25 (0) ** WMI static instances retrieved: ..................................................................................... 2072.
06809 14:51:25 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
06810 14:51:25 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 1.
06811 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06812 14:51:25 (0) ** # of Event Log events BEFORE WMIDiag execution since the last 20 day(s):
06813 14:51:25 (0) ** DCOM: ............................................................................................................. 0.
06814 14:51:25 (0) ** WINMGMT: .......................................................................................................... 0.
06815 14:51:25 (0) ** WMIADAPTER: ....................................................................................................... 0.
06816 14:51:25 (0) **
06817 14:51:25 (0) ** # of additional Event Log events AFTER WMIDiag execution:
06818 14:51:25 (0) ** DCOM: ............................................................................................................. 0.
06819 14:51:25 (0) ** WINMGMT: .......................................................................................................... 0.
06820 14:51:25 (0) ** WMIADAPTER: ....................................................................................................... 0.
06821 14:51:25 (0) **
06822 14:51:25 (0) ** 30 error(s) 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found
06823 14:51:25 (0) ** => This error is typically a WMI error. This WMI error is due to:
06824 14:51:25 (0) ** - a missing WMI class definition or object.
06825 14:51:25 (0) ** (See any GET, ENUMERATION, EXECQUERY and GET VALUE operation failures).
06826 14:51:25 (0) ** You can correct the missing class definitions by:
06827 14:51:25 (0) ** - Manually recompiling the MOF file(s) with the 'MOFCOMP <FileName.MOF>' command.
06828 14:51:25 (0) ** Note: You can build a list of classes in relation with their WMI provider and MOF file with WMIDiag.
06829 14:51:25 (0) ** (This list can be built on a similar and working WMI Windows installation)
06830 14:51:25 (0) ** The following command line must be used:
06831 14:51:25 (0) ** i.e. 'WMIDiag CorrelateClassAndProvider'
06832 14:51:25 (0) ** Note: When a WMI performance class is missing, you can manually resynchronize performance counters
06833 14:51:25 (0) ** with WMI by starting the ADAP process.
06834 14:51:25 (0) ** - a WMI repository corruption.
06835 14:51:25 (0) ** In such a case, you must rerun WMIDiag with 'WriteInRepository' parameter
06836 14:51:25 (0) ** to validate the WMI repository operations.
06837 14:51:25 (0) ** Note: ENSURE you are an administrator with FULL access to WMI EVERY namespaces of the computer before
06838 14:51:25 (0) ** executing the WriteInRepository command. To write temporary data from the Root namespace, use:
06839 14:51:25 (0) ** i.e. 'WMIDiag WriteInRepository=Root'
06840 14:51:25 (0) ** - If the WriteInRepository command fails, while being an Administrator with ALL accesses to ALL namespaces
06841 14:51:25 (0) ** the WMI repository must be reconstructed.
06842 14:51:25 (0) ** Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
06843 14:51:25 (0) ** otherwise some applications may fail after the reconstruction.
06844 14:51:25 (0) ** This can be achieved with the following command:
06845 14:51:25 (0) ** i.e. 'WMIDiag ShowMOFErrors'
06846 14:51:25 (0) ** Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
06847 14:51:25 (0) ** ALL fixes previously mentioned.
06848 14:51:25 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
06849 14:51:25 (0) **
06850 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06851 14:51:25 (0) ** Unexpected, wrong or missing registry key values: ................................................................... 1 KEY(S)!
06852 14:51:25 (0) ** INFO: Unexpected registry key value:
06853 14:51:25 (0) ** - Current: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ) -> 0
06854 14:51:25 (0) ** - Expected: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ) -> 1
06855 14:51:25 (0) ** From the command line, the registry configuration can be corrected with the following command:
06856 14:51:25 (0) ** i.e. 'REG.EXE Add "HKLM\SOFTWARE\Microsoft\WBEM\CIMOM" /v "Logging" /t "REG_SZ" /d "1" /f'
06857 14:51:25 (0) **
06858 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06859 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06860 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06861 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06862 14:51:25 (0) **
06863 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06864 14:51:25 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
06865 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06866 14:51:25 (0) **
06867 14:51:25 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!. Check 'C:\USERS\{Username}\APPDATA\LOCAL\TEMP\WMIDIAG-V2.1_2K8R2.SRV.SP1.64_{ComputerName}_2012.07.10_14.40.25.LOG' for details.
06868 14:51:25 (0) **
06869 14:51:25 (0) ** WMIDiag v2.1 ended on Tuesday, July 10, 2012 at 14:51 (W:103 E:51 S:1).

Following might help
A Wmiprvse.exe process crashes in Windows Server 2008 R2 when you use the WMI interface to query the hardware status on a computer that supports the IPMI standard
http://support.microsoft.com/kb/2280777
I do not represent the organisation I work for, all the opinions expressed here are my own.
This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
I saw this in my googling. Listed as the cause on the hotfix page is the following: "This
problem occurs because the Ipmiprv.dll module leads the Wmiprvse.exe process to crash. This behavior depends on certain hardware sensor types when the sensor is enumerated." The
faulting module for that hotfix is ipmiprv.dll, and our faulting module is ntdll.dll. I'm thinking that this hotfix isn't applicable, but I'm open to hearing why I'm incorrect if I am.
Seth Johnson

Build Application Error

Similar Messages

Maybe you are looking for