"Build Application/settings/Advanced/Run after installation" is not working LV70

Hi !
Look at thread
http://forums.ni.com/ni/board/message?board.id=170&message.id=129269
Seems like "Run executable after installation" is not workin at all (LV70, W2K).
I' been try all,
- run directly *.BAT file
- i great exe file what' s runn *.BAT file.
If i run directly "CmdPrompt3.exe" (attachment , source) it's working but not
with when i run "setup.exe" ?
What is wrong ?
What means "wait until done" ?
BR
-HeVi-
Attachments:
CommandPromt3.vi ‏23 KB

Hi HeVi,
I'm not sure that I completely understand what your issue is. Are you
trying to launch a BAT-file after the installation of an application?
In that case, I will recommend you to refer to the following
KnowledgeBase:
Running a Batch File Automatically After an Installation to Access Installed Files
If the methods in this KB doesn't work, please let me know.
Have fun!
PS: I wish it was only 25 degrees celsius here - it's currently around the 40 degrees celsius in Austin...
Message Edited by Philip C. on 07-08-2005 02:42 AM
- Philip Courtois, Thinkbot Solutions

Similar Messages

Hello. after updating to Ios 8 my iPhone is terribly! Discharged very quickly, many transitions between applications, the program takes off, ringtones do not work - works a standard call, the keyboard freezes, bad messages are sent, often loses the n

Hello. after updating to Ios 8 my iPhone is terribly! Discharged very quickly, many transitions between applications, the program takes off, ringtones do not work - works a standard call, the keyboard freezes, bad messages are sent, often loses the network. what have you done with your phone moym ?! solve all these problems! I beg of you!

Hello. after updating to Ios 8 my iPhone is terribly! Discharged very quickly, many transitions between applications, the program takes off, ringtones do not work - works a standard call, the keyboard freezes, bad messages are sent, often loses the network. what have you done with your phone moym ?! solve all these problems! I beg of you!

SM36/37: Specification "After Job" does not work for Daily "periodcity"

I reviewed http://help.sap.com/saphelp_nw04/helpdata/en/20/2d513897110872e10000009b38f889/content.htm, which states what I am trying to do should work, but it does not.
Here's the deal:
1. I have two jobs: "A" and "B".
2. "A" runs Daily.
3. I set-up job "B" to run "After job" "A" in my SM36 definition.
Job "B" will run the next day, but never runs again after that even though job "A" continues to run "Daily" as it should.
Further info:
1. We have "Event-triggered" jobs that run fine, but the "After Job" designation doesn't seem to work ongoingly.
2. I can review both jobs "A" and "B" for any "Predecessor" or "Successor" jobs, and, the first jobs to run after the initial set-up DO reference each other (in other words, let's say I schedule job "B" to run "After job" "A" on Tuesday. After Tuesday's run, Job "A" sees job "B" as it's "Successor" job and job "B" sees job "A" as it's "Predecessor" job), but the definition doesn't last into the next day ONLY FOR JOB "B" (as I mentioned, job "A" always runs fine).
3. I can't set the "periodcity" for job "B" because, once I flag it to run "After Job" "A", the "period" options disappear.
4. One final tidbit: the variant for job "B" has a "key date" specified so the date is dynamic for each day the job runs. I can set up job "B" to run "Daily" with this variant and it runs fine, but I wanted it to run AFTER job "A" so it never runs if job "A" doesn't run. (At this point, it's becoming a matter of principal!)
Here's my question:
Why won't job "B" continue to run "Daily" after job "A" (a "Daily" job) runs?
Thanks in advance,
Lara

Please close this thread since you posted the same question here:
[SM36/37: Specification "After Job" does not work for Daily "periodcity"|SM36/37: Specification "After Job" does not work for Daily "periodcity";

I have deployed one application containing youtube video but it is not working pls help

I have deployed one application containing youtube video but it is not working pls help Application is build using struts2 and is deployed in oracle cloud, login page works fine but the success page is not displayed please help

Hello,
A wild guess, given the lack of details:
I wonder whether it would violate the http://en.wikipedia.org/wiki/Same-origin_policy ?
This is part of the security infrastructure.
"Stealing" content to insert it anywhere else might also violate copyrights?
Technically, does it at least work "on premises" onto WLS 10.3.6?
Regards
Patrick.

I have problems with my macbook pro ... I recently bought "OS X Lion Mountain" but complete installation did not work ... purchases every time when I look biem appstore is still installed ... so now I have OS X version 10.8.3 ...

I have problems with my macbook pro ... I recently bought "OS X Lion Mountain" but complete installation did not work ... purchases every time when I look biem appstore is still installed ... so now I have OS X version 10.8.3 ...

does it say not installed or does it say "download" in app store purchases?
if it say's download, then it's there for future use if you need to download it again.
see image below - i'm running Mountain Lion and it say's download in my App Store.

Ask for password after screen lock not working!?

Ask for password after screen lock not working? It used to work before mavericks, each time my computer display sleep I'm asked for the password immediately. Now it never asks for it?

From 2008 MacRumors discussion:
SOLUTION: Browse to Home>Library>Preferences and drag com.apple.systempreferences.plist to the desktop.
Caused by a corrupt user preferences file. On restart, you may find user settings have defaulted. Set up as desired.
Worked for me.

I clicked on "Erase all Content and Settings and now my ipad is not working, only the apple logo appears. how to i reset it back?

I clicked on "Erase all Content and Settings and now my ipad is not working, only the apple logo appears. how to i reset it back?
Some please show me how to reset it.

Here is some information from Apple:
http://support.apple.com/kb/TS3274
http://support.apple.com/kb/HT4057

Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analy

Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."

Nobody can tell you anything without proper system info or other technical details. We don't even know what exactly you are trying to install.
Mylenium

I just purchased Adobe Photoshop Elements 13 but my computer is not recognizing my CDRom and I cannot download the program. I tried copying the files on the program disc to my hard drive but get a message the installer will not work. I have the redemption

I just purchased Adobe Photoshop Elements 13 but my PC is not recognizing my CDRom and I cannot download the program. I tried copying the files on the program disc to my hard drive but get a message the installer will not work. I have the redemption code and serial numbers. Can I download the program online somewhere? If I download a trial version for instance will it allow me to enter my serial number and use it for the full program?

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

did ae install without problem? check the install logs to be sure (Troubleshoot with install logs | CS5, CS5.5, CS6, CC)
if it did, what do you see when clicking the executable?

Satellite A300-1EH - windows installer does not works accurately

Hello, this is my first post on this forum!
My windows installer does not works accurately.
What to do?
Soryy but i dont now much about computer systems.
Have I to reinstall this installer?
I'm waiting for your replys.

>My windows installer does not works accurately.
What do you mean exactly? Do you see some error? What happen exactly?
Maybe your CD is scratched or damaged.

Anlysis authorization implemented after Cascading is not working

Anysis authorization implemented after Cascading is not working.
Example: i have 3 dropdownboxes in WAD . Frist dropdownbox State, second dropdownbox District, third dropdownbox Town.In the first dropdown box i selected state AP ,it should show only districts in AP in the second dropdownbox.
But it is not showingin the second dropdownbox.
Please help me

Hi Priya,
The issue may be due to the SQL Reporting Services maximum number of parameter items. We can try to add following code to Web.config file to resolve the issue.
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="30000" />
<add key="aspnet:MaxJsonDeserializerMembers" value="30000" />
</appSettings>
(Note: We can according to our requirement to set these values. After that, restart all SQL Server services. )
By default, the Web.config file is located in:
C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportManager
C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer
More detail information, you can refer to the article about SQL Reporting Services maximum number of parameter items.
http://sqlsrv4living.blogspot.in/2012/10/sql-reporting-services-maximum-number.html
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

LOCK THE USER AFTER X ATTEMPTS --NOT WORKING?

LOCK THE USER AFTER X ATTEMPTS --NOT WORKING
OpenSSO -->Configuration-->Authentication -->Core -->Login Failure Lockout Count:( 3 ) --> Warn User After N Failures: ( 4)--> Email Address to Send Lockout Notification: --> [[email protected]|mailto:[email protected]]
I tried above step but failed to achieve LOCKING the ACCOUNT...
Could some one please help me...

This only works if you use the LDAP auth module.

My bb tourch 9800 OS 06 is not supportive to download any application from website becouse BB app word not working

my OS 06 is not supportive to download any application from website becouse BB app word not working. some one help me to get a new version of OS plz either it my work

can you explain what you mean by "BB app word not working" ?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

LV 8.5.1 Installer "run after installation" not executed in silent mode ; Autoupdate

Hi all,
I developed a software used "inhouse" by most of my colleagues. This software is changed continuously.
In the past I had to inform everyone that there's a new release available.
Thus I developed a "quick and dirty" autoupdate mechanism. (See attachments)
The application looks for a file located on our server, which contains the version number of the most current release.
If the version number of the installed software and the version number in this file differ, the Installer for the new release is executed.
In the Installer settings I run the installed software after installation finished.
So that the user doesn't notice there was an update and the software starts as allways.
The installer is started with commandline options to install in silent mode with surpressed License Notification und supressed restart.
The start of the installed software after installation works if I start setup.exe in "normal" manner (doubleclick setup.exe)
BUT the software DOES NOT start after installation when installed in silent mode. (Commandline prompt: setup.exe /q /AcceptLicenses yes /r:n )
(Tested with XP, Vista, 7)
Does anyone know how to get this working ?
Thanks in advance, best regards,
Balze

Balze wrote:
Hi Andrey,
neither /qb nor /qf works
Well, just checked - it seems to be works as expected in LabVIEW 2010 and doesn't work with 8.5.1 as you have described.
There are some bugs in installer's builder was fixed between versions 8.5 and 10.0.
What you can do - upgrade to latest LabVIEW version or try to fix installer manually. I guess trouble present in \bin\dp\install.msi file. You can check what inside of msi with Orcas utility provided by Microsoft.
Hope it helps,
with best regards,
Andrey.
PS
Whole family a little bit ill due to relative cold weather...

"Build Application/settings/Advanced/Run after installation" is not working LV70

Similar Messages

Maybe you are looking for