Build Collada DOM 2.2 in X-Code and got _unZOpen, Close a link errors

I am trying to build Collada DOM 2.2 in XCode and getting following link error.
Collada DOM is providing minizip (library) which contains zip.h and unzip.h, which is called after calling mac libraries; Is any way I can specify in XCode project build specifications to read minizip from Collada first?
Building target “viewer” of project “viewer” with configuration “Debug” — (8 errors)
"_unzGoToNextFile", referenced from:
daeZAEUncompressHandler::extractArchive(void*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)in libdom.a(daeZAEUncompressHandler.o)
"_unzGetCurrentFileInfo", referenced from:
daeZAEUncompressHandler::extractFile(void*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)in libdom.a(daeZAEUncompressHandler.o)
"_unzCloseCurrentFile", referenced from:
daeZAEUncompressHandler::extractFile(void*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)in libdom.a(daeZAEUncompressHandler.o)
"_unzOpenCurrentFile", referenced from:
daeZAEUncompressHandler::extractFile(void*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)in libdom.a(daeZAEUncompressHandler.o)
"_unzReadCurrentFile", referenced from:
daeZAEUncompressHandler::extractFile(void*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)in libdom.a(daeZAEUncompressHandler.o)
"_unzGetGlobalInfo", referenced from:
daeZAEUncompressHandler::extractArchive(void*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)in libdom.a(daeZAEUncompressHandler.o)
"_unzClose", referenced from:
daeZAEUncompressHandler::~daeZAEUncompressHandler()in libdom.a(daeZAEUncompressHandler.o)
"_unzOpen", referenced from:
daeZAEUncompressHandler::daeZAEUncompressHandler(daeURI const&)in libdom.a(daeZAEUncompressHandler.o)
Your help greatly appreciated.
Thanks

Please look into following link
https://sourceforge.net/forum/forum.php?threadid=2643729&forumid=531263

Similar Messages

TS3297 I tried to download with a redemption code and got the message: "your computer isn't authorized"

I tried to download with a redemption code and got the message: "your computer isn't authorized" -- how do I do that?

Quit Safari, launch it directly from HD/Applications/ instead; trash the old version 5.1 on your Desktop... it isn't working with the Safari 5.1.1 system frameworks, and wasn't updated due to not being in HD/Applications/

HT1918 When I changed my credit card iTunes says that my security code is invalid. I even entered another card with its valid security code and got the same message. The security code I entered was correct but I can't get iTunes to accept it as valid.

When I changed my credit card info iTunes says my security code is invalid but the one I've entered is correct. I've even added a different card and I still get the message that the code is invalid. This means that I cannot download an app or song because I can't get past the payment page.

iTunes Store: My credit card's security code or zip code does not match my bank's records

I recently purchased an apple card and redeemed my code and got 15$ but I don't know how to use it. Please help

How do I use my balance money

Select the app you want to purchase and your balance will be debited accordingly!

MSI K72N Delta LSR - windows XP keeps stop codes and serious errors Puzzled why

hi,
System specs
AMD sempron 2400
512mb DDR PC3200 ( 2 x 256nb Matrix module brand memory written on chips )
MSI K7N2 Delta LSR ( lastest Bios )
Onboard sound - Enabled
Onboard lan - Disabled
Liteon DVD Rom
CD-RW 52x
ATI Radeon 9550 ( installed at moment )
before was a Nvidia FX5700 LE took back faulty as tried radeon 9800 pro and was ok for a couple hours
got Nvidia FX 5500 - faulty fan making noise on boot.
Ive built a System up and its been running fine for a few months and then 1 day system crashed and got windows recovered from serious error and and wound't shut down but only restart.
Replaced memory that was in and checked with mem99 and said it was faults so replaced memory and shutdown problem vanished.
Few days later windows xp started saying recovered from serious error again with stop codes
0x0000050
Bccode 10000050
Bccode 1000008e
Bccode 1000000a
Stop Code D1
They was the stop codes been getting since, some said Page_fault_in_nonpaged_area, IRQL_not_less or Equal
Im puzzled what the problem can be know, even tried reformatting and reinstalling windows twice and not solved it, tried a another cdrom drive and still same.
Im puzzled what the problem can be.

Temps are fine running about 45'c in windows and max about 52'c when in full load ive got motherboard monitor on all time monitering temps and also recording and save out log file when turned off for temps.
Its a retail boxed AMD Sempron which i dont think much to the stock heatsink and fan ( Athlon 64bit ones are loads better copper base and heat compound instead of sticky pad )
The new memory is only think is got whats wrote on the memory modules is called Matrix, I know from past experience's when u reinstall windows and files cant copy across ok and keeps saying cant read file etc or cant copy file during installation thats indication bad memory strip, ive even got a memory thats fault ( i only use for testing and diagnostic ) as 1 of the memory modules comes up fault in memtest96 and even tried that and still same, thats how i found out in first place memory was causing system not to shutdown properly.
What i can try is my memory as ive got 1.5gig in Elixir branded and i know thats ok 100% with nforce 2 boards as i had a MSI K7N2 Delta ILSR and ran elixir memory with np, before i got a Gigabyte KT880 board.
Antivirus ive got running on system at the moment is AVG and always used it all time, it dont use any cpu usage and also saved my system loads from virus as it caught them as they tried to run and stop them, something norton's dont seem to do very well.
I give modem a try on a USB hub but its strange when u unplug USB its ok and NTL recommends when modem stops working to unplug power from back modem and leave it a while and it comes back on, done this in past successfully but this time its blue screening, Which could be part of windows main files are corrupted. The USB Modem is running of its own PSU so shound't be using USB power at all, if it was that explain blue screen when taking power off as it do it when taking usb out.
Error codes ive watched a Microsoft web broadcast ( over a hour long ) about error codes and 40% of them are software + hardware related combined they make it sound so easy to diagnose them but in reality unless u know windows 100% its hard to.
Harddrive seems to copy files ok across and back, i have to try another Harddrive and see but from past experiences when Harddrives are about to fail windows seems to stall, lockup and also just stop responding when accessing certain programs or files.
Its a confusing 1 as u solve 1 piece of puzzle another comes up and throws u off track again.
Looking that all parts ive replaced so far have solved 1 or another problem to only reveal another hidden, PC's who have them lol
If i solve it i post my finding np it keep me busy for a couple days testing things, u learn something new every day with pc's new faults and problems and how to solve them, try too lol
And most of time its compatibility problems but odd times hardware or software.

Flash Builder 4 fails to compile Beta 2 code

I just recently upgraded to FB 4 from Flash Builder 4 Beta 2. All my code worked in the Beta version, but stopped working in the released version.
I was told to change my namespace declarations to mx from halo. I did this but problems remain.
Now I'm being told that "The style 'background-color' is only supported by type 'mx.controls.List' with the theme(s) 'halo'.
Also, despite changing the namespace declaration in the css file, I am still getting errors complaining that namespace qualified type.
There must be an answer to these problems. Can anyone help please?

OK, so I forgot to mention that at the beginning of this fiasco, I
had an error that said: unable to open c:...blah blah/TLFText.css
So I found the file in my Beta 2 install dir and copied it to the new 4.0 folder.
I suspect that this is where all the css warnings were coming from.
So, I deleted the file and no more warnings. But also, I got the original errors again.
Why is it looking for this file? Why doesn't it use the correct file?
Is there any way I can go back to Beta 2? This would solve my problems.

How do I do use the custom code and format for a percentage with 2 decimals in Report Builder 3.0?

In Report Builder 3.0, I have the following custom code entered:
Public Function SafeDivide(Numerator as String, Denominator as String) as String
Try
If Numerator = “” or Denominator = “” then
Return “-“
End if
If Numerator = “-“ or Denominator = “-“ then
Return “-“
End If
If CDbl(Numerator) =0 or CDbl(Denominator) = 0 then
Return “-“
End if
If IsNothing(Numerator) or IsNothing(Denominator) then
Return "-"
End if
Return Val( ( (CDbl(Numerator) / CDbl(Denominator) )*100 ) )
Catch
Return "-"
End Try
End Function
I call the custom code in the cell with the following equation:
=Code.SafeDivide(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value),sum(Fields!LY_UNITS.Value))
I have the format for the cell set to 0.00%, but it’s not being followed.
I want the result to be formatted as a Percentage, but instead I get values like:
-78.9473684210
80
300
-100
I have the format for the cell set to 0.00%, but it’s not being followed.
How do I do use the custom code and format for a percentage with 2 decimals?

Hi AngP,
After testing the issue in my local environment, I can reproduce it. Based on my research, I find this issue is caused by the type of Units_VAR_Percentage cell is string, while the type of CDbl(Parameters!Var_Threshold.Value) is double, so they cannot be
compared.
To fix this issue, we can add a hidden column (Textbox91) next to the Units_VAR_Percentage column, and type =(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value)) /sum(Fields!LY_UNITS.Value) as the expression. Then use the expression below to control the
BackgroundColor:
=iif(iif(reportitems!Units_VAR_Percentage.Value=CStr(format(reportitems!Textbox91.Value,"0.00%")),reportitems!Textbox91.Value,0)>CDbl(Parameters!Var_Threshold.Value),"Yellow","PaleTurquoise")
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to get source code and build files for Eudora 7, and price?

Looking for source code and build/make files for Eudora 7 to port to Win7 and Ubuntu 14. Where is a source for this and what is the cost?

You best ask qualcomm. It is their intellectual property.
Eudora OSE was based on Thunderbird and the source code for the Penelope add-on is open source (that is what made Thunderbird over to OSE)

Using Java Embedding Unzip Code and a Trigger File in a BPEL Process

Hello,
Thanks in advance to anyone that contributes with any insight. It is much appreciated. Having said that I will get to the crux of my problem.
I am currently using Oracle 11g. I have created a SOA composite application that incorporates BPEL and Java. I have the code needed to unzip and extract compressed folders. However, when this was first built out using BPEL it automatically created a web service in the "exposed service" lane and not a file adapter which I believe is needed in order to trigger the process via a start.txt file for example. Based on what I know ... this web service automatically connecting to the BPEL process was simply due to the order of operations, etc. So by creating a 'read' file adapter first and then creating the BPEL process and selecting the template "Define Service Later", it does not automatcially connect the web service to the BPEL process and it will allow me to connect a file adapter to this BPEL process instead ... great. When opening up the BPEL file I then connect a recieve component to this file adapter and configure appropriately.
Essentially, my objective in setting up a trigger to start this unzip process is due to the BPEL process before that outputs or writes the .zip folder to the same directory that I want to poll and/or trigger via a start.txt file. I can get this process to work with a webservice connecting to the BPEL process and by using a Java Embedded in BPEL file, which in turns calls the package/ class that has the java code needed to unzip.
For some reason whenever I try to use a file adapter instead of the native web service that gets created (as mentioned above) it doesn't work. It seems to build or compile just fine however, I am getting errors when I try to deploy.
Note: The Java code contains all the paths where the zip file is to be taken from and extracted to. So because this is in the code I don't need the file adapter to handle this. I just want to use the file adapter so that I can trigger the process via start.txt or something of that nature.
Thanks to anyone that has any suggestions.
Kind Regards,
Kevin
Errors when attempting to deploy are as follows:
[04:12:54 PM] Error deploying archive sca_Job2_UnZip_rev1.0.jar to partition "default" on server soa_server1 [http://WN017A.homedepot.com:8001]
[04:12:54 PM] HTTP error code returned [500]
[04:12:54 PM] Error message from server:
There was an error deploying the composite on soa_server1: Deployment Failed: Error occurred during deployment of component: BPELProcess1 to service engine: implementation.bpel, for composite: Job2_UnZip: ORABPEL-05250
Error deploying BPEL suitcase.
error while attempting to deploy the BPEL component file "H:\Oracle\Middleware\user_projects\domains\Dev_Acorde\servers\soa_server1\dc\soa_d78eb301-314c-422a-a748-bcfe7d0906e8"; the exception reported is: java.lang.RuntimeException: failed to compile execlets of BPELProcess1
This error contained an exception thrown by the underlying deployment module.
Verify the exception trace in the log (with logging level set to debug mode).
[04:12:54 PM] Check server log for more details.
[04:12:54 PM] Error deploying archive sca_Job2_UnZip_rev1.0.jar to partition "default" on server soa_server1 [http://WN017A.homedepot.com:8001]
[04:12:54 PM] #### Deployment incomplete. ####
[04:12:54 PM] Error deploying archive file:/C:/JDeveloper/mywork/Job2_UnZip/Job2_UnZip/deploy/sca_Job2_UnZip_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)

Just wanted to provide a screenshot of the BPEL file as supporting documentation to better illustrate my issue.
Thanks so much,
Kevin

HELP! hp laserjet prints code and infinite blank pages!

hey guys,
ive got an early 2009 imac with 2.66ghz intel core 2 duo and 8gb ram,
im running latest mavericks and trying to use a hp laserjet 1320tn printer.
PROBLEM:
when i press print i get one page with a line of code and then infinite blank pages untill i hold cancel.
the line of code is :
%! PS-Adobe-3.0
%APL_DSC_Encoding: UTF8
%APLProducer: (Version 10.9.2 (Build 13c6
here are some things that i have tried:
* checked toner - 46% full
* using the printer set up on a network (unshared)
* using the printer via usb
* reseting printing system ( many times )
* using latest drivers
* using older drivers
* using alternate drivers from HP
* using a generic post script printer driver
* repair / verify disk permisions ( many times )
* (last resort) Clean install of osx mavericks with fresh hp updates
im fresh out of ideas guys
the printer has been checked with a windows laptop and it printed perfectly and immediately so its an issue with my mac
i dont really want to buy another printer as a need a small network duplex monochrome laserjet, and this is perfect ( except i cant get it to work !)
also i checked with the manufacturer and apple and this printer is supposedly supported.
any help would be awesome!

OK here goes... (please take a deep breath)
I'm going to include TONS of details, hoping that something here might help you get to the answer.
If it's too much for your brain at whatever moment you get time to read all this, I do apologize.
Maybe come back later when they're sleeping and you're wide awake, if that is ever possible. I was a stay-at-home Dad for one precocious child for a few years, so I have a tiny idea what you're talking about, though our married friends with multiple (usually bickering) children always assured us that having just one child is nothing at all like having children. So bless you! My heart goes out to you!
Anyway, in Windows, there used to be a generic HPPCL driver and a generic PostScript driver for older printers. You could usually use a "generic" driver just fine, because very few programs (other than page layout and graphic design) used even 1/10th of the capabilities of the lowest-common-denominator oldest version PCL or PostScript command set. Something like that DOES exist in the Mavericks print installation dialogue.
But back to YOUR printer.
I tried installing my HP LaserJet 1320 on my iMac running Mavericks*.
Unlike Windows, you can't install a printer that OS X Mavericks cannot 'see', either directly connected or via a network 'share', or wirelessly.
My HP is connected via a network share. This should not significantly change what happens when you install your printer, but no guarantees.
This was my first attempt to install the HP, because my default printer is a Canon inkjet, connected wirelessly via WiFi.
So the LaserJet is in another room physically connected via USB to a MacBook, and marked 'Share this printer' on the MacBook system preferences. The MacBook has to be awake (not sleeping) and in this case, physically connected for my iMac to 'see' it.
So, when I clicked the + sign in the , System Preferences, Printers & Scanners to add a new printer,
I entered the description HP LaserJet 1320 into the search box the first time, then
1. Mavericks tried to "find" the HP LaserJet on the network, connected to the MacBook.
2. "This printer requires software that is not installed..."
3. "Downloading Printer Software Update..."
4. "Setting up "HP LaserJet 1320 Series @ KoMtB (MacBook's network name)
5. At that point the printer appeared in this Add window shown below:
Note the bottom Use: window below Location...
Note that the third choice is Generic PostScript Printer...
THIS IS THE ONLY PLACE AND THE ONLY TIME you can apparently select anything about which printer 'language' the Mac is going to use to talk to your printer:
In searching for about 10 minutes, I did not find any way to ever get BACK to this screen once the printer installation is complete, short of deleting and reinstalling the printer again, or adding the printer a second time with a different name.
I selected the choice highlighted, HP LaserJet 1320 series. I did a test print from TextEdit, and it worked perfectly the first time. I also tried it from Pages, and again, it worked perfectly, no spewing of PostScript initialization strings...
My suspicion is that maybe Generic PostScript Printer is getting selected by Mavericks somehow without ever informing the user.
Maybe 'Auto Select' does it. Don't know.
In any case, since you've already done a Printing System reset, you have nothing else (custom print job Presets) to lose by trying to reinstall it again.
I tried it, and It SHOULD also be possible to install the same printer multiple times, PROVIDED THAT you rename each one slightly during the Add process (HP-3200, HP-Auto Select, HP-Generic PostScript... ), so you can give several of them a try until you find one that actually works.
Now, here's how to find the 'generic' PCL printer driver...
Add the printer again, giving is a new name.
In Use: select "Select Software", then search for "HP LaserJet Series PCL 4/5"
HP LaserJet Series PCL 4/5 driver IS a 'generic' PCL driver, and SHOULD work for basic printing, provided that you DO NOT use the slash between 4/5 in the printer name use a dash - instead. When I tried it with a slash (probably because it was a network share, the printer did NOT install. When I tried again and used a dash, it worked fine.
The PCL 4/5 driver comes with a disclaimer as shown below:
Your HP is apparently from the year 2000? (Mine is from 2004.) It's so hard to give up old workhorse friends, especially when one toner costs almost a much as a new printer. The good news it that newer LaserJets are WAAAAAAY faster, and a toner for a new model still costs almost as much as a new printer...
After years of buying ONLY genuine HP toner, I finally purchased a generic toner cartridge online last year when I needed to print about 1500 pages. The high capacity generic refill cartridge cost 1/3 of price of a genuine HP 'standard capacity', and it works beautifully.
Of course this is time consuming, especially when you have active kiddos competing for your time, but the last alternative after Gutenprint is to purchase a new printer.
*DISCLAIMERS & FOOTNOTES:
I don't use OS X Mavericks much, so I'm really not the best person to ask. But I did answer this thread ages ago.
So, if none of this helps, please post your question again as a brand new message in the OS X Mavericks forum.
That way it will likely get far more 'views' than posting your question in an old thread already marked 'solved'.
From what I've seen in the Apple Support Communities, those most knowledgable tireless Saints of Mac with tens of thousands of reputation points who frequent these forums most every day usually look for the 'unanswered' and 'unsolved' questions first.
Mostly I use OS X 10.8 Mountain Lion, because that's what shipped already installed on my iMac that I purchased from Apple as a refurb in Dec 2013. And because 10.8 seemed more 'sorted out' than Mavericks did last December.
When I got my iMac last December, I immediately installed OS X 10.9 Mavericks on an external drive that I could select at boot time because:
1) I could get Mavericks for free (wasn't sure if it would be a limited-time thing)
2) Purchase of a new or refurb Mac then included a free iWorks suite (Numbers, Pages, Keynote) latest versions (wasn't sure if it would be a limited-time thing)
3) I have Windows 7 installed under Parallels 9 on Mavericks to run basically one legacy Windows application I spent years learning and still use once or twice a year. Honestly, almost the only time I use Mavericks is to run Parallels 9 and Windows 7 and that legacy Windows app.
4) My original Mac is a mid-2007 MacBook is still running OS X 10.6.8. That's what the HP printer is connected to. I now use the MacBook for email or when I need to take a computer somewhere else. My MacBook is not capable of being upgraded to run Mavericks, and I wanted to at least know about the current version of OS X, even if I NEVER upgraded my main system.

Internet Explorer 9 not showing as not installed when using Windows Update - Error: Code 9C48 Windows Update encountered an unknown error.

I built a few new Windows Server 2008 R2 with SP1 VMs today and ran into a problem where Windows Update is not detecting the fact that Internet Explorer 9 is already installed. Internet Explorer 9 keeps showing up as an available update when
using Windows Update. When I try to install it as a test I get the error message: Code 9C48 Windows Update encountered an unknown error.
My normal build procedures include applying all the patches for the OS prior to any other work on the servers. The way I like to do the patching is to do every update other then IE9 in the begininng and once all the other updates have been
completed, install IE9 and then patch it if there are updates available. I followed this procedure on every build for the last year and I have not run into any issues until today. The only difference today is the latest patches that were released yesterday
April 10th, 2012. To test the theory that it may be one of the latest patches, I reinstalled Windows from scratch making sure to format the disks and then I installed IE9 right after the OS install without any other updates. Once the
server was rebooted, I checked Windows Update and Internet Explorer 9 still showed up as update (Not the Cumulative Update which normally shows up after an IE9 install) and yes, I did make sure to click the 'Check for Updates' link before I looked just
in case. My next test was to patch a couple of the servers I had built prior to April 10th, 2012. Those servers did not have any issues with the latest updates and they are not experiencing the same behavior as the newly built servers.
I ended up comparing the IE9 Version on the cleanly install OS (No updates were installed except IE9) and the servers I built last week which were patched. The versions are exactly the same.
My findings above lead me to believe that there is a problem with the latest IE9 install package (which includes the latest cumulative update) and the Windows Update detection component.
I guess I am looking for someone to report this up the chain to get this fixed so no one else runs into this problem. I know in some cases we may not be able to see additional IE9 updates until this is resolved.

I just started having the same problem.
I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
I proceed to kick off the 100+ downloads needed before i left and left the console up.
When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created.

New Issues with Flash builder - Second time you do search from imported Tutorial file it breaks with AS error

Okay, so I had an issue with the Design View that was broke because of the <s:text> tag inside of the <s:RichText> tag. Adobe fiexed that in one of the next released builds (discussion here in fourms). So I took the tutorial file (again) and started to work on it and all went okay, except that the 'tracking' method on the ricktext tag was taken out. Forums mentioned that. So on import of the 'tutorial' fxp from FC to Flex builder, you get several errors because FC still builds the fxp file with 'tracking' property being used in the RichText tag. No biggie, i just remapped to trackingLeft property in the effected files. Now mind you in the older build that I had this project, worked fine, with the exception of the 'design view' issue with the <s:text> file borking the design view. Bug on it said it was fixed with the next build. which it was but this now when you take the EXACT same code and compile and run it the seach will break each and everytime. Think it has or may have something to do with Adobe taking out the 'tracking' property on the richtext tag.
anyone else having this issue?
attaching the fxp file
btw, posted as a bug FB-21116
https://bugs.adobe.com/jira/browse/FB-21116
Craig

I can recreate the problem but I haven't seen it reported
before. WebHelp has an option that would let you avoid the input
box in the Index but not FlashHelp.
There is information in Snippet 1 on my site about TOC
synchronisation but I don't know if it will help with FlashHelp.
Please report this bug via the Adobe site.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Linker Error while building files refering to NI-DAQ API

Software: MATLAB 5.3
O/S : Windows 98
C Compiler : Microsoft VC++ 6.0
We are trying to make an executable of an Application involving both of MatLab and C Files
The file SCANsingleBufSync2.c is C program calling National Instruments NI-DAQ API's. This C program is called by displayCnt3.m,a MatLab Program. Both of the files are individually compiled using
mcc -x SCANsingleBufSync2.c, ...
That works fine.
When trying to make a build , using
mcc -B sgl displayCnt3 SCANsingleBufSync2.c
it is throwing the following error.(pl. refer section at end)
Basically it is not able to do Link. The MatLab path has been set to look into the NI-DAQ .dlls
C:\Program Files\National Instruments\Ni-daq\Includes and
C:\Program Files\National Instruments\Ni-daq\Lib
Also the Windows path has been set to the above two directories through the autoexec.bat.
Suggestions Please,
Thanks in advace,
MOHANDAS
� mcc -B sgl displayCnt3 SCANsingleBufSync2.c
SCANsingleBufSync2.obj : error LNK2001: unresolved external symbol _DAQ_VScale@40
SCANsingleBufSync2.obj : error LNK2001: unresolved external symbol _SCAN_Demux@16
SCANsingleBufSync2.obj : error LNK2001: unresolved external symbol _SCAN_Op@40
SCANsingleBufSync2.obj : error LNK2001: unresolved external symbol _NIDAQErrorHandler@12
SCANsingleBufSync2.obj : error LNK2001: unresolved external symbol _Timeout_Config@8
displayCnt3.obj : error LNK2001: unresolved external symbol _MdisplayCnt3_SCANsingleBufSync2
displayCnt3.exe : fatal error LNK1120: 6 unresolved externals
MBUILD.BAT: Link of 'displayCnt3.exe' failed.
mcc -B sgl displayCnt counter.c
counter.obj : error LNK2001: unresolved external symbol _Select_Signal@16
counter.obj : error LNK2001: unresolved external symbol _GPCTR_Change_Parameter@16
counter.obj : error LNK2001: unresolved external symbol _GPCTR_Set_Application@12
counter.obj : error LNK2001: unresolved external symbol _NIDAQErrorHandler@12
counter.obj : error LNK2001: unresolved external symbol _GPCTR_Control@12
counter.obj : error LNK2001: unresolved external symbol _GPCTR_Config_Buffer@20
counter.obj : error LNK2001: unresolved external symbol _Set_DAQ_Device_Info@12
counter.obj : error LNK2001: unresolved external symbol _NIDAQYield@4
counter.obj : error LNK2001: unresolved external symbol _GPCTR_Read_Buffer@36
displayCnt.exe : fatal error LNK1120: 9 unresolved externals
MBUILD.BAT: Link of 'displayCnt.exe' failed.

I'm not very familiar with MATLAB, but you are getting link errors most likely because you aren't linking in the .LIB files for NI-DAQ properly. They are nidaq32.lib and nidex32.lib in the NI-DAQ\lib directory. They need to be linked in with the code to resolve these symbols.
Best Regards,
Chris Matthews
National Instruments

Java code and jsp interaction

Hi,
How does one interact between java code and jsp page.That is, if the java code does say database connection, the web page should tell that the connection has been made,just like an application but this will work on the web server not in the console.Kindly let me know.
As

Just curious but where do these questions come from? A course you are taking or you are building something for a hobby?
If you are building some small simple web-app it's probably quicker to embed code right onto your JSP page.
There are various levels of abstracting your web-app separating display from logic from the model.
The following are techniques from simple web-apps to more complicated ones.
-Embedding script right into your JSP
-Using beans
-Using custom tags ( I think there are some standard ones now, struts seems to be a popular buzzword)
-Including a servlet to handle your requests redirect, update bean content grab info form your database and forward to a JSP. (Read up on model 2 architecture.)
To include as much detail as possible would be to write a book. Fortunately many have so I don't have to fit one in this tiny reply box.
Hope that was somewhat useful.

Deafult tax code and tax jurisdiction per vendor

Hi,
   We are using tax jurisdiction in Process, now while creating Po every time according to vendor we have to enter the tax jjurisdiction and tax code , i s there any mwthod with which we can set default tax code and tax juridiction code as per vendor means we want to maitain as per vendor code, so that for eah item i n that PO , tax code and jurisdiction code will come automatically.
I have also check by making the tax jurisdiction code mandatory in Vendor master , in vendor master i have added tax jurisdiction for the vendor but while creating PO, system is not selecting the tax jurisdiction automatically.
   regards,
    zafar
Edited by: zafar_karnalkar on Jun 4, 2010 6:18 AM

Hello,
Tax Jurisdiction code will be determined from the plant. Please check your Plant/Site Master. SAP provided a BADI ME_TAX_FROM_ADDRESS also to redetermine Tax Jurisdiction code based on custom logic.
For Tax codes, you have to maintain condition records for condition type NAVS using MEK1. There are many standard access sequences available to maintain this. You may also build custom one if needed.
Thanks,
Venu

Build Collada DOM 2.2 in X-Code and got _unZOpen, Close a link errors

Similar Messages

Maybe you are looking for