Build distribution error - WINNT.H
When I go to build a distribution for my project I get an error for WINNT.H. It says:
cviincludes.h - 20 errors
"WINNT.H"[523,10) syntax error; found 'indentifier' expecting ','.
In the WINNT.h it highlights a line __inline ULONGLONG
Since this is my first project and the first time I've tried to create a distribution, I have no idea what to do next. If I go back in to my project, change build configuration back to debug, I can't build my project anymore. I get the same error as above. Any ideas?
Mike
Solved!
Go to Solution.
Hi Adam,
I did have a couple of includes before windows.h so I moved them and get the same error. Right now I've got:
#include <windows.h>
#include <utility.h>
#include <ansi_c.h>
#include <userint.h>
#include "toolbox.h"
#include <formatio.h>
#include "inifile.h"
#include <gpib.h>
//#include <analysis.h>
//#include "counter.h"
//#include <time.h>;
#include <cviauto.h>
#include <cvirte.h>
#include "Sirius_rev1.h"
#include "DatalogControl.h"
#include "SerNum.h"
#include "lotID.h"
#include "Switches.h"
#include "TestControl.h"
#include "SetupControl.h"
I'm not sure what some of these are like cviauto.h, userinit.h, toolbox.h, and utility.h. It seems like I can comment out some of them and my .c compiles but I always get them same error when doing the distribution build.
Mike
Similar Messages
-
Hi All,
I applied SQL server 2008 R2 SP3 recently but report builder doesn't work since then
When click on report builder gives error like 'Application validation did not succeed. Unable to continue.
and when I try to see details the error summary like following:
+File, Microsfot.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
this is urgent.
Please reply me asap.
thanks a lot in advance.
Regards,
Nik
Regards, NamanHi nikp11,
According to your description, you recently updated SQL Server 2008 R2 to SP3, Report Builder doesn’t work since then the error occurs: "Application validation did not succeed. Unable to continue".
This is an known issue in SSRS 2008 R2 SP3 that Microsoft has published an article addressing this issue. It is not planning to release a fix for this issue. But we could implement one of the following workarounds:
Install and run Report Builder 3.0 of SQL Server 2008 R2 RTM.
Install and run Report Builder of SQL Server 2014.
Uninstall Service Pack 3 then uninstall Service Pack 2 and then reinstall Service Pack 3.
Reference:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch
Thank you for your understanding.
Best Regards,
Wendy Fu -
I am trying to run a cheque payment batch but the Build payments request is erroring. I have run this successfully many times a month or so ago.
I have tried searching metalink, on OTN and googling the error but no luck.
Here is the log from the request:
Payments: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
IBYBUILD module: Build Payments
Current system time is 10-DEC-2012 17:36:39
**Starts**10-DEC-2012 17:36:40
**Ends**10-DEC-2012 17:36:43
BUILD PROGRAM ERROR - CANNOT COMPLETE CHECK NUMBERING
Start of log messages from FND_FILE
Enter Build :: Concurrent Request ID::4699011
|STEP 1: Insert Payment Service Request:: Timestamp:10-DEC-12 05.36.40.324885000 PM +11:00|
|STEP 2: Insert Documents :Timestamp:10-DEC-12 05.36.40.363742000 PM +11:00|
|STEP 3: Account/Profile Assignment :Timestamp:10-DEC-12 05.36.42.262375000 PM +11:00|
Request status after assignments: ASSIGNMENT_COMPLETE
|STEP 4: Document Validation :Timestamp:10-DEC-12 05.36.42.305476000 PM +11:00|
Request status after document validation: DOCUMENTS_VALIDATED
|STEP 5: Document Re-Validation: Timestamp:10-DEC-12 05.36.42.425959000 PM +11:00|
|STEP 6: Payment Creation :Timestamp:10-DEC-12 05.36.42.427070000 PM +11:00|
Request status after payment creation: PAYMENTS_CREATED
|STEP 7: Payment Re-Creation:Timestamp:10-DEC-12 05.36.42.942589000 PM +11:00|
Final status of payment request 683 (calling app pay req cd: tdl chq 10-dec-12 #6) before exiting build program is PAYMENTS_CREATED
|STEP 8: Check PICP Kickoff Flag: Timestamp:10-DEC-12 05.36.42.945151000 PM +11:00|
|STEP 9: Payment Instruction Creation :Timestamp:10-DEC-12 05.36.42.947062000 PM +11:00|
FV_FEDERAL_PAYMENT_FIELDS_PKG.GET_PAY_INSTR_SEQ_NUM: FV: Federal Enabled profile is not turned on
Return status of payment instruction creation: S
|STEP 10: Check Numbering : Timestamp:10-DEC-12 05.36.43.441961000 PM +11:00|
After numbering, return status: E, and return message:
Exception occured when numbering checks of payment instructions. Check numbering will be aborted ..
SQLCODE: -20001
SQLERRM: ORA-20001:
Build program error: Exception occured when attempting to provide printed document numbers (check numbers) for the payments of the provided payment service request.
End of log messages from FND_FILE
Executing request completion options...
Output file size:
439
Finished executing request completion options.
Concurrent request completed
Current system time is 10-DEC-2012 17:36:43
---------------------------------------------------------------------------Hi,
Since you were able to run this successfully earlier, i would rule out the possibility of this being a BUG...
The second most likely cause is that, the payment document used by this payment process request is also being used in another payment process request which is in incomplete status....So, make sure there are no other payment process requests pending apart from this one ... either complete those or terminate those...
The Third cause is that, the payment document defined would have exhausted its sequence numbers, hence you should either increase the sequence or use a different payment document which has enough number of sequences available for generating checks...
By sequence i am referring to the number of check leafs...
If the above does not apply, then you would be better off logging a service request with oracle, as it could be something new which many are not aware of ...
Regards,
Ivruksha -
BUILD PROGRAM ERROR - CANNOT CREATE PAYMENTS
Hi, I'm trying to run a payment batch using payments manager and encountered this error.
In my test data I used two suppliers that belongs to the same operating unit.
Payments: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
IBYBUILD module: Build Payments
Current system time is 09-NOV-2009 11:26:11
**Starts**09-NOV-2009 11:26:11
**Ends**09-NOV-2009 11:26:13
BUILD PROGRAM ERROR - CANNOT CREATE PAYMENTS
Start of log messages from FND_FILE
IBY_PAYGROUP_PUB.performPostHookProcess: Fatal error - Payment count mismatch after hook operation. # payments passed to hook: 1, # payments returning from hook: 2
IBY_PAYGROUP_PUB.performPostHookProcess: Aborting program ..
End of log messages from FND_FILE
Executing request completion options...
Finished executing request completion options.
Exceptions posted by this request:
Concurrent Request for "Build Payments" has completed with error.
Concurrent request completed
Current system time is 09-NOV-2009 11:26:13
Please help
thanks,
RenzHi
Please review the below note from Metalink,
Bug No. 6771847
Filed 24-JAN-2008 Updated 13-MAR-2008
Product Oracle Payments Product Version 12.0.4
Platform Linux x86 Platform Version ENTERPRISE 4
Database Version 10.2.0.2 Affects Platforms Generic
Severity Severe Loss of Service Status Closed, Verified by Filer
Base Bug N/A Fixed in Product Version 12.0.4
Problem statement:
R12: AFTER APPLYING 12.0.4 BUILD PAYMENT PROGRAM ERRORS
please review the same if it resolvs your error.
Thanks
Manish Jain. -
I am trying to make batch payment in Release 12 via a Payment Manager.
The invoice which are selected by the payment process request belong to 2 operating units. The problem comes with the build progam getting errored out.
The out file displays the following message:
"Build program error: Exception occured when attempting to create payments from the documents payable of the provided payment service request."
The log file is as follows:
Payments: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
IBYBUILD module: Build Payments
Current system time is 22-JUN-2009 15:08:50
**Starts**22-JUN-2009 15:08:50
**Ends**22-JUN-2009 15:09:08
BUILD PROGRAM ERROR - CANNOT CREATE PAYMENTS
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 22-JUN-2009 15:09:09
Could someone please provide a solution for this.
you may email me at [email protected]so if i have 2 sites...say X and Y then I can pay invoices from these two sites using a single check.
say on X site i entered invoice 1 and 3
and on Y site i entered invoice 2 and 4
so can i pay all invoice 1 2 3 and 4 using batch payment..i know this is yes
but the question is can i pay using a single check??? -
Now 2012.08.08
In Indesign CS 6
Folio Builder login error appears. Message is shown below.
"Sign in has failed
Network failure"
How do you solve?
DPS Version is
12.2.4.20120611_m_691037
8.0.7.21http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5377&fileID=5010
Patch!
Solve it!
Enjoy Works~! -
Incorrect distribution -Error while distributing GOA to R3 Backend system
Hi,
We have installed SRM server 5.5 and implementing contract Management
scenario with backend system R/3 4.6B.
In this scenario we are creating a Global Outline Agreement in SRM
system and distributing it to the back-end ERP system.
In SRM5.0 GOA (Trans.type GCTR) that are distributed at Header level
are failing to distribute to R/3 system v4.6b
We are getting this error message in SRM transaction SLG1: -
The error ocurred by processing event RELEASED_NEWLY with GUID
DCA7101B320134F1949F000347DE470F and object_id= 5600000054 " RECEPIENT
NOT FOUND"
The purchasing org , the plant has been mapped .Also vendor & material is maintained for the company & Plant .
The condition types are mapped in SRM
Pls suggest.
Regards,
AvinashHi Avinash,
In reference to your query about GOA, the distribution error might be beacause of the issues in BADI implementation.
By using the BADI you can define which document to be created in the backend.
BBP_CTR_BE_CREATE BADI can be used in SRM and BBP_CTR BADI can be used in back end R/3 for this purpose.
Check for the transaction types (GCTR) and the number ranges for the transaction types.
The GOA will either create a contract or a Scheduling agreement in R/3 back end after distribution.
Also refer the below SDN thread in this regard :
Re: Scheduling Agreement from GOA
Any further clarifications are welcome.
Award points for suitable answers.
Rgds,
Teja -
Hi all,
There's a problem need your help.
I have a LV8.5 PDS. And I create a exe, when I want to create a installer, I cannot found any information is "additional installer". When I try to build it, error reports as below.
error information:
CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_PreBuild.vi >> CDK_Validate_DistParts.vi >> CDK_DistParts_GetInstalledProducts.vi >> NI_MDF.lvlib:MDFProdInfoList_Open.vi
Before I reinstall my notebook, it worked.
Thanks ahead.From the forum
The build specification for your installer may have been corrupted. Try the following to correct this:
Open up your project in the Project Explorer window and expand the Build Specifications tree.
Right-click all of the applications (executables) build specifications that are included in your installer and select Build to force each one to rebuild.
If all the executables build successfully, next right-click your installer's build specification and select Properties to change its configuration.
In the Category pane on the left, navigate to the Source Files category.
Find your executable (.exe) files on the right side and click it to select it. Press the Delete key or click the red X at the bottom of the window to remove the executable and its associated files from the build.
Re-add the executable and its files to the same folder by selecting the executable in the Project View pane and the proper folder in the Destination View pane (on Windows systems, this is typically ProgramFilesFolder\[your product name]), and clicking the blue arrow button in the middle of the window.
Repeat steps 5 and 6 for any other executables you have in your installer, as well as for any other files which show up in the ProgramFilesFolder path.
Your installer should now build successfully. If that does not work, try making a new installer build specification which has all of the same settings as the build specification which does not work. If the new installer builds properly, you can keep it and delete the old, corrupted specification. -
Hello,
We are facing an error with our Transsport system. The TR's are not showing up in the buffer list of our production system.
There were 6 TR to be imported in the production system. But before it gets into production, it has to have the approval in the quality systems. After having given the approval, only 3 TR's were showing up in the import buffer of the production.
The other three are facing a distribution error.
"User KANDIKON has no authorization for the tp command"
User KANDIKON has no authorization for the tp command SETACTIVE
Message no. TP607
Diagnosis
To execute the tp command SETACTIVE you need the administration authorization S_CTS_ADMIN in the Change and Transport System. It can be found in the authorization profile S_A.SYSTEM.
System Response
The function terminates.
Procedure
Contact your system administrator.
For more information on authorizations and authorization profile, see the online documentation on the CTS. "
The concern is how come for other TR there were no issues when the approver was the same.
Please suggest as to how to proceed further.
Thanks and Regards,
Ankit MishraYou should check whether that user has authorization for the object.
S_CTS_Admin is needed if you want to do STMS activity.
Regards, -
Urgent - Flex builder internal error
I am running into this Flex Builder internal error when I run a debug session
An internal error occurred during: "child count update"
This happens to me in my app which load a swf (AS2). This is a proxy swf I use to get AS2 to talk to AS3 swf.
If I remove the loader, then I do not have the error.
This is severely hampering my efforts to debug my app, for which thsi proxy swf is important. Has any one encountered this? ThanksI got a similar error while...
var dataString:String = swfBA.toString();
for purposes of trying to obsufacate via String replace() to a SWF loaded into a ByteArray decompressed and deserialized for class name extraction, etc..
[Cause without it we're not protected!?! but that's another story about decompilers and code theft.]
Ultimately I'll look for another way another day, but I thought it might help you to mention it.
Oh Flash Builder 4 with latest SDK 4+ 64bit windows 7 and it's about a 4MB SW FFlex source. -
How to build distribution package with Agilent VISA as primary
Hi everybody,
I build a distribution package under LW 8.0 in a PC(Agilent VISA is primary), then I install the distribution package in another PC.
But I found the distribution package install NI VISA as primary in another PC. So How could I make Agilent VISA as primary when I build Distribution Package?
Does anyone can help me?TaoZ,
Does your application use both NI-VISA and Agilent VISA? NI-VISA is only functional as the primary VISA, so if you need to use both NI-VISA and Agilent VISA, Agilent VISA will need to be secondary. If you are using just Agilent VISA, then you should not need to install NI-VISA. If you already have NI-VISA installed on the system, then typically Agilent VISA will overwrite NI-VISA because they use higher version numbers than us, but this is not necessarily always the case. Which version of each driver are you working with?
National Instruments
Product Support Engineer -
ALE distribution error - 0 communication IDOC
Hello,
We are getting 0 communication IDOC generated for message type DOCMAS error for ALE document distribution error. Please advice where to look for the error.
Anirudhhi,
ani,
u check this,
If you want work items to be created when errors occur for the purpose of error handling, you need to assign the standard task TS40007915 PCROLL to a position or a workflow organizational unit.
Or
You can also distribute dependent objects manually for classes. You can use report program RCCLDIHI to distribute a complete class hierarchy including all classes characteristics, and characteristic values.
Only the message code (004 - change) is allowed for sending a document (message type DOCMAS). This function also creates the document in the target system.
You can control the sending of documents with the indicator Distribution lock. An object with this indicator in its status will not be distributed into other ALE systems.
You can set the indicator in Customizing Document Management System Define document type Define status. The distribution lock is read when a distribution automatically starts after a change pointer is set or for an Integrated Distributed PDM Solution (ID PDM).
You can ignore this setting by starting the distribution manually. When you set the indicator Ignore distribution lock in the initial screen, then all documents will be distributed overriding the previously set status.
You control the distribution of object links with the indicator You cannot maintain the object links via ALE and Object link unchanged in target system.
Information about object links are distributed through IDoc type DOLMAS01.
The data is transferred to the workstation application and to storage data in IDoc type DOCMAS04 if an original file exists to a document. The Remote Function Call interface protocol transfers the contents of the original file, for example text or design drawing.
You can determine whether you want originals of a certain document type to be distributed by ALE into another system under the setting Document Management System Define document type Define transport of originals for ALE. You can control distribution with various criteria.
You want to distribute all original files of the application WRD (Microsoft Word) for the document type R-1 (report) that are stored in vault VAULT1 (Vault for Office Applications). You do not want to distribute documents of the same document type for the application WWI (Winword 6.0).
You can process the status for the desired objects.
1. Select in Customizing Cross Applications Components Distribution (ALE) Standard ALE Business Processes Logistics Master Data Distribution Integrated Distributed PDM Solution (ID PDM) Object status (for example, Define BOM status).
2. Process the indicator Distribution lock
ben -
Cannot activate build 9860 - Error code 0x8007232B
Cannot activate build 9860 - Error code 0x8007232B
-- SvenCHi
you can also look here, it is for windows 8 but it should work for windows 10.
https://support.microsoft.com/kb/929826?wa=wsignin1.0
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Labview 8.2.1 RT Build Deployment Error
Hello,
I am trying to build a simple RT application. However, I get an error stating that there is an "error in invoking the build engine.....check for broken VIs".
However, I have created a simple application with just a string constant wired to a string indicator.
I have attached a screen shot of my error.
Any ideas?
Thanks.
Attachments:
RT Build Deployment Error.JPG 99 KBHi Somit,
Thanks for posting on the discussion forums. The most common solution to this error is to repair your LabVIEW installation. If you are using Windows XP you can do this by going to Control Panel, then to Add/Remove Programs, selecting the National Instruments software tab, and then the Change/Remove button. From the populated list of programs that opens in the new window you can perform a repair on your LabVIEW 8.2.1 (this may take a while and you will need the cds). I hope this helps out. Have a great day!
Regards,
Michael
Applications Engineering
National Instruments -
Build Distribution - PXI version VERY large
I have an app that has a PC and PXI version. The PC version is just a CAN (communications) interface, while the PXI version allows control of cards in the PXI box (Switch, DMM, ...).
In previous versions of Lab Windows CVI I would not include the drivers, only the runtime engine.
In version 9.0 of CVI, I cannot remove the distribution build that includes a bunch of drivers, so the PC version is just under 15 MB the PXI version is over 800 MB.
How can I get the drivers to not be included in the build (they are already installed on the PXI boxes)?
Or, how can I figure out exactly what the heck-fire is so big?Hi Ken,
It is possible to remove all additional drivers from a distribution in CVI by going to Build->Distributions->Manage Distributions. You can then select the distribution and click "Edit". You cen then select the "Drivers and Components" tab and uncheck all the components that are unnecessary including the runtime engine and any drivers. this will ensure that your distribution only includes the files within your application.
Raj
National Instruments
Applications Engineer
Maybe you are looking for
-
Firefox is not letting me open another tab when I click the button or the 'new tab' in file. I have restarted my computer, installed an update, and I still have the same problem browsing.
-
Hi experts, could anyone please tell me about any sap standard alv interactive report, if there are any? Thanks and Regards, Ramana
-
Hi friends, Any one can tell me the solution to resolve the error maximum number of internal sessions reached . regards, p.varadarajan
-
Java 1 vs. Java 2 Event Handling
Prelude: This question relates to writing code for event handling. Java 1 is based on a hierarchy model to handle events, ie. inheritance from superclasses. Java 2 uses delagation event handling method. Java 2 code will not compile if it includes Jav
-
Can't create constant for cluster with waveform inside it..
I have an indicator cluster that contains a timestamp, string, three booleans, two doubles, and a graph using a 1D array of waveform datatype. When I include the waveform graph inside the cluster, I can't right click the control terminal and create a