Build error Caught IOException when trying to copy files

Hello,
Sometimes when I build a BPM project in NWDS I get this error,
Caught IOException "C:\NWDSWS.jdi\LocalDevelopment\MINSUR_BPM\demo.com\bpm_hrsolpos_v2\_comp\gen\default\public\def_cmp\lib\moin\demo.combpm_hrsolpos_v2def_cmp.zip (the process doesn't have acces to the archive because it's been used by another process)" when trying to copy files from "C:\NWDSWS.jdi\LocalDevelopment\t2\CAC172530F2EFDDCD642AFD09DBA1782\default\" to "C:\NWDSWS.jdi\LocalDevelopment\COMP_BPM\demo.com\bpm_hrsolpos_v2\_comp\gen\default\"
Anyone knows how to solve this?
Regards
SU

Hi
I had the same problem.
Just if other get the same issue
I solved it by logging of the computer with NWDS and logon again.
Daniel

Similar Messages

Error code -1309 when trying to copy files?

Cannot find information about this code online.
I am trying to transfer some video files from one firewire HD to another. Transfer fails each time & this error pops up.

You can't put a file which is 4GB or larger onto a MS-DOS/FAT32 drive without compressing or segmenting it regardless of how much space is available on the drive.
(49406)

Error -50 when trying to copy files to external hard drive.

When trying to copy files (itunes music folder) to an external hard drive, I get the following message: Copying music failed. An unknown error occurred (-50).
I have tried repairing disk permissions but still get the message. Any thoughts?

Gary,
A couple of posts referencing "error -50" seem to indicate that the error could result from a corrupted file.
One from Kappy follows:
Error -50 Post
One way you could save your music to the other drive would be to do it folder by folder (dragging each artist's folder, to the other drive). I suspect you won't have many (if any) errors doing that, and if you hit the corrupted file, you can come back to that folder and see which one is bad. You could also try to drag groups of artists folders to the drive if you had quite a few. One note: If you save your files this way, you won't be saving the library, which contains all the playlists you've created...you'll have to recreate them.
If you needed that music down the road, you could just do a File>Import from iTunes....
Hope this helps,
Bob

Error message when trying to copy files from memory stick to MacBookPro

Trying to copy files from my memory stick to my MacBookPro and have started to get a crazy error message - "Attempting to copy to the disk Macintosh HD failed. You do not have enough access privileges for this operation."
I've never had a problem before today. Any help will be welcomed!

Try this. When the stick is mounted on your desktop, right click "Get Info" and at the bottom choose "ignore ownership on this drive." See if that works.
Bryan

Error when trying to copy files to external drive

When attempting to copy files to external hard drive I get a message " unable to copy some data, error code -36".
How do I find out what that error code is tring to tell me?

Sadly, I have had this issue as well. Last eyar Iit got to the point I couldn't copy at all. From what I recall, Apple told me it could be one of many things. A bad internal drive, bad permissions, a bad external drive, a bad firewire port, a bad cable, bad memory, and on and on. I never did figure it out, but I do know my hard drive did crash a month later. However, having said that, I own a new computer, and last week, it started again. Still have not figured out what is going on. Good luck.

Error in Console: "Failed to check-in!" when trying to copy files.

Whenever I try to copy files, I get the "Preparing to copy..." dialog, which never gets beyond the striped bar. At the same time I try to copy a file, in the Console, I get an error of "Failed to check-in!" Also I get a similar reaction when I try to empty the trash, it just hangs at the "Preparing..." dialog with the striped bar.
I have tried restarting, running repair/verify on the permission and disk. Have also tried Disk Warrior with no success. Does anyone have an idea of what's going on?

I reinstalled Snow Leopard and it fixed the problem.

Error Code-50 when trying to copy or delete files on external hard drive

Hi,
I am in process of backing up large HD video files from one external hard drive to another using Carbon Copy Cloner software. I get this error message: "This file or folder is sitting on a bad section of hard disk media and is unrecoverable. Delete this item (i.e. in the Finder) and restore it from a known good backup, then try the backup task again."
I have tried to delete that folder in Finder and I get error code-50, it won't delete.
I tried to delete individual files within folder - error code 50.
I tried to "replace" folder with good copy from other external hard drive. Error code-50
I tried to "repair disk" in Disk Utility application and I get error message "cannot unmount disk."
NOTE: the files in this folder are .m2ts format, from an old PC. I converted then into .mov but want to retain originals.
NOTE: I was successfully able to copy the folder from a 3rd external hard drive to the backup disk without a problem (which makes me think it's not the files/folder but has to do with the actual disk.), but cannot fix it on the original (source) disk.
Bad disk?
Bad files?
How do you fix a "bad section of a hard disk"?
Might reformatting the entire disk fix the "bad section"?
Any advice welcomed and appreciated!
Thank you!

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

Error -51 when trying to copy file to windows server 2012

When I try to copy a file from OSX to windows server 2012 share, it acts like its going to start and i get a pinwheel and finder is acting slow and finally error -51. although it does seem to copy over the folder with correct name but no files inside. I had this issue on mavericks as well and now on yosemite beta. Please help!
Jarrod

If the drive is formatted HFS then you are limited to 32 characters on a file name. If it is formatted HFS + then you can have file names as long as 255 characters. I am not familiar withi the format you say the drive is formatted in so I can't speak to it.
If you are receiving -50 errors that can indicate a file name that is too long OR an illegal character in the filename regardless of its length.
If you are actually using 10.3.8 as your profile states then that may be part of the problem. Many of these problems existed in 10.3.X but were fixed in 10.4
I remember that 10.3.8 had issues copying to external drives when there were more than a certain number of characters in a filename. I don't remember the number but for some reason 10 or 12 is what comes to mind. It caused me many problems when I would try and copy files to a Zip disk that I used to have. Since I updated to 10.4 those issues have never occured again.
Since you know what folder the problematic files are in why not just open the folder and try to copy files one at a time. When you get to the one(s) that is a problem, change the file name to something shorter.
A better solution would be to update to 10.4 but with 10.5 coming out sometime in the Spring of 2007 this may not be the time.

Invalid Cross Link when trying to copy files e17

Hello I got a new hard drive and I was trying to copy all my files to it here is the dircetories
/media/multimedia/Pictures
to
/media/Pictures
Those are two different USB hard drives.
Any thoughts?
"Edit"
1. Open first hard drive /dev/sdc2 mounted on /media/multimedia/Pictures directory with enlightenment filemanager
2. select all files, right click, copy
3. Open /dev/sdd1 mounted on /media/Pictures Directory with enlightenment filemanager
4. no option in right click menu for paste, so I use ctl + v
5. "An error occurred while performing an operation"
Cannot move '/media/multimedia/Pictures/IMG_9539.JPG' to '/media/Pictures/IMG_9539.JPG'. Invailid cross link device.
Last edited by mich04 (2012-11-20 12:54:27)

This is not at all helpful. Please read http://www.catb.org/esr/faqs/smart-questions.html
and then edit your post to include the exact command(s) you used, paste the full error messages and any other details that might help people assist you.

I get error 8062 when trying to copy files from one external hard drive to another. It starts out copying files, but after 10 minutes or so it stops and I get the error 8062. The hard drive tech support says the problem is in my Macbook Air.

I cannot copy my doc and photos and videos from one external hard drive to a second external hard drive -- both plugged in to my MacBook Air -- I get Error 8062 and the copying (which seemed to be going on for 10 minutes) stops and nothing gets copied.
As any Macbook Air owner knows, there is SO LITTLE storage capacity on the computer that you have to back up big files onto an external hard drive to avoid getting the other annoying error that says you have no more memory/storage capacity/whatever the proper term is, and you cannot use the computer.
Backstory: Before this error cropped up, I had backed up lots of files to an external drive and then removed them from my computer. But then the external hard drive got corrupted and I could not access my entire photo library. Had to pay $850 to Kroll Ontrack to recover those files. I have now bought 2 new external 1 Terrabyte hard drives as protection against another such disaster. BUT I cannot copy the files from the first hard drive where all my reovered files now sit, to another backup hard drive.
Feeling vulnerable. Please help.
SusaninNY

From the menu bar, select
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Safe Mode and test.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

Error when trying to copy files to a DVD+RW

I am unable to copy images to a brand new blank DVD+RW disc. I keep getting an error message "Current disc canot be overwritten...". Please help.

I can use Windows 7 to copy the picture files by opening the blank DVD and dragging the files to the disc folder; I just cannot see any way to use PSE 9 to copy the files because it keeps giving me the error message that the disc cannot be overwritten.
I would like to use PSE 9 to copy images to a DVD, rather than have to use windows.

Error message E_IO_CANNOT_OPEN when trying to copy to Nook

First time I've ever had this issue. Is it the book, the Nook, or ADE?

First time I've ever had this issue. Is it the book, the Nook, or ADE?

I have noticed that when using Tigers Dosk utility to ERASE a flash drive I have a choice of FAT but not FAT32. It seems that flash drives formatted as FAT do not work properly when trying to copy files from a Windows machine. Why?

I have noticed that when using Tigers disk utility to format an external USB flash drive I only have the choice of FAT ( when formatting for use on a Windows machine ) and not FAT32. I have found that USB FLASH drives formatted as FAT do not always work on Windows machines. Why? How can I use Tiger to format for FAT32?

I think it depends on the size of the Flash Drive as to whether it uses FAT16 or FAT32.
Can you format it FAT32 on the PC?
Other options would be NTFS or Mac OS Extended...
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930
MacDrive for the PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/

Error Code Ox8002006E when trying to burn files. Why? What can I do

I keep getting this error code and can't burn anything without getting it. Don't know what to do?

Have you checked if there is any video content in the file as I have just reburnt a number of disks after removing vidoe and have had no problems
Verbatim DVD-RW 4.7gb 6x

PC crashed. Attempted to install NEW copy of Elements 10 that I had in reserve. Always get ERROR MESSAGE 400 when trying to open the program. Please advise how I get around this error.

My PC crashed. I rebuilt it from scratch and tried to install my unopened copy of Elements 10. I get error message 400 when trying to open the program. Windows 8.1 64bit

if that's a network connection error, Sign in, activation, or connection errors | CC, CS6, CS5.5

Build error Caught IOException when trying to copy files

Similar Messages

Maybe you are looking for