Build failed:"Message type not defined" - can't dereference schemas in MDS?

Hi,
I'm trying to write my first ABCS using the WorkerEBM & EBO.
I used the AIA service component wizard to generate the composite app. When I try to build it I get the error:
*Error(66): WSDL messageType "{http://xmlns.oracle.com/EnterpriseServices/Core/Worker/V1}CreateWorkerReqMsg" of variable "CreateWorkerAppReqMsg" is not defined in any of the WSDL files*
I can browse soa-mds connection from jdeveloper and navigate (using [ctrl-click]) from my composite to the wsdl and through to the schema - so JDeveloper can find all the necessary resources at coding time.
It can take up to 40 seconds to query and view the AIAMetadata subfolders this way.
Could the build script be timing out while querying soa-mds for resources at build time? Is there a timeout config that can be extended?
FYI: I had to add the jdbc-password of the MDS store to adf-config.xml to get past a password failure message in scac.log.
Thanks
...Garret

Similar Messages

Error message - Message no. 26168, Document type '' not defined .

Hi,
I am setting up QA system after successful building of Dev System .
While chnaging newly created folder in QA system gives error message - Message no. 26168, Document type '' not defined .
Document Type exists and are used to create folders successfully.
Why I am getting this error?
Kind Regards
Harish

Hi,
Am Not able to implement this Note .
Am facing the same issue .Please let me know the solution ASAP.
Our SAP Version ECC6 EHP6
Regards,
Veeramani

Error Document type "" not defined

Hi All,
I am getting below error message when i am trying to see the output of a query build on Infoset in SAP R3 system.
The Infoset is build on top of BKPF,BSEG and EKPO Tables.
Document type not defined
Message no. F5814
Diagnosis
Financial Accounting service: document type "" was not found in the document type table. There are two possible causes:
document type "" has not been set up in FI customizing
document type is supplied incorrectly from the calling application
System Response
System error.
Procedure
There are two possible measures:
set up document type "" in FI customizing
system error within the calling application - get in contact with the SAP Hotline Service.
Any input on above issue will be of great help.
Regards,
Anjali Singh

Hi Anjali,
In which system you are getting this error? Development or Production?
I think you have doc. type just in BKPF (Accounting documents headers). Check if you have any record with document type blank.
You can use t code SE16N for this issue. When you are setting filter on field "document type" (BLART) you can see the list of values. Check if there is any blank item
Regards,
Omid

'Order type not defined in the sales area'.

Hi,
I am creating a sales order, in order type I am taking standard order 'OR' but it is giving error message -'Order type not defined in the sales area'.
Pls where to tweak..
regards,

Hi,
In the transaction code OVAZ you can assign the SALES ORDER type to your SALES AREA
and also check the below transaction code
OVAM--- Reference distribution channel
OVAN---- Reference Division
OVAO ---Reference sales organisation
revert back if you need any more
thanks
santosh

Document type not defined in lsmw idoc method

hello iam posting Open AR Line Items for contract account using message type
CTRACDOCUMENT_CREATE using lsmw idoc method .iam getting error as Document type not defined but actually when iam creating document manually item is created with out any error that means it is defined and my functional consultant is also saying he defined document type.can some body explain me what is the problem.
Regards
priya

Check OMW9, here document type is defined for the transaction MIRO..
Go to OMW9, click in the Document Type.
Then double click on MIRO.
Also check the sap notes which is referred in the similar thread Document type not defined f5814

I get an "install failed" message. "Recovery system can't be created-click restart to return to previous version of OS X." This doesn't work. My Mac continues to try to install Mountain Lion. What is the elegant way to get my system back?

I get an "install failed" message. "Recovery system can't be created—click restart to return to previous version of OS X." This doesn't work. My Mac continues to try to install Mountain Lion. What is the elegant way to get my system back?

The first time I attempted to install ML was on a late 2011 MBP. It ran for three minutes then gave me the error message: Could not install OSX due to an unexpected error. I was using the original ML install app, not a USB or other drive.
After a couple of restarts wiht the same result I saw a message to the effect that the install was trying to close open apps. I closed apps manually a few times to no avail. I shut down instead of restarting then booted into Safe mode (hold down the shift key when starting) and that did it. The install went smoothly after that.
I since installed ML in two iMacs using a cloned copy of the install app on a USB drive. This time I shut down the computers and booted into Safe Mode first and there were no problems.
I don't know if this issue is the one causing you these problems but it is a simple enough solution to try.
Jay

Message Type not visible in BD10

Hi,
One of the message types is not visible in BD10. Will this appear if I add it using BD60 transaction. But my doubt is that all the message types visible in BD60 are again not there in the F4 help. Is there some othere place where the message type has to be maintained.
Regards,
Deepti

hi
If you add required message type in BD60 you can see it. but the thing is BD10 is only for MATERIALS. So material related message types only you can see there. It you want to see customer related message type then you can go to BD12.
While creating message type in BD60, system should ask reference message type. You have to select one reference message type while selecting dropdown or pressing f4 for reference field in BD60. If you select MATMAS as reference message type there then you can see that message in BD10.
Reward if it is helpful.
Thanks
Siva Kumar

While click on document shows error"document type not defined"

HI
we have folder structure in DMS like:
public folder->engineering folder->design folder->document(any)
while i am clicking on document it shows error msg document type not defined
please let me know why this error occur

Hi,
Since you are using document structure functionality, You are require to create an public folder initially and private folder for each user which is specific to user ID.
If you dont want to create private folder you can select "Select document Via in CV03N screen and select only" Selection screen " and not browser.
If the above changes is done then system will not through an error from CV03N screen"document type not defined"
reward points if useful.
Rgds,
Nayeem.

Fault Message is not defined?

Hi @,
I am using BPM asyn sync for File2RFC scenarion and while activating the scenarion I am getting return code 99 and when i see the activation log I am getting errro description as Fault Message is not defined I have done the Fayult message mapping between Abstract Sync Message and RFC Sync message between their fault and exception types but still
Help is urgent
Regards

Hi,
you define the exception handler in the block properties. Define (via context) an exception branch for the block, where you jump into in case of errors and decide, what to do (f.e. alert or stop process).
Regards,
Udo

Table type not defined for table control "T_CONTROL" (Custom table)

Hi All,
I m facing a problem in ITS mobile service.
The Table control designed by me in R/3 (Module pool program) is
not getting displayed in ITS mobile page.
It is giving me an error "Table type not defined for table control "T_CONTROL" (Custom table) ".
Can you please let me how this issue can be resolved.
With Regards,
Mahesh

CONTROLS: table_ctr TYPE TABLEVIEW USING SCREEN '0010'.
try using this....
Regards
Vasu

I have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this

i have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this bluetooth with my devices, thanks

sos1der wrote:
pairing the apple equipment is not a big deal just wanted to add songs from itunes wirelessly.
You can only add songs to your iOS device from iTunes via Wi-Fi sync or via your cable, not Bluetooth.
sos1der wrote:
but i tried paring my LG bluetooth so i can listen to music on my computer wirelessly buy it gives me the same error message
That's an entirely different issue, unrelated to your iOS devices.

Document Type not defined-J1IS

Hi,
When i am doing J1IS Transaction, at the time saving the documest i am getting an error Document Type not defined, so please guide where to define and necessary Customizing for that!
Thanks in advance,

Dear Andy
If I understood your explanation correctly, please check in [VOFA] for the billing type S1, whether you have assigned S1 in the field [Document Type]
For information, as like for F2 document type, RV is the accounting document type which flows by default even if you maintain blank field but for S1, you should maintain the accounting document type for cancellation which is nothing but S1.
thanks
G. Lakshmipathi

TS2755 the pic butten on messages is not working. can not send or recieve photos. please help.

the pic butten on messages is not working. can not send or recieve photos. please help.

Hi Beharley,
try resetting your network settings: Settings - General - Reset - Reset Network Settings. This works fine if something is messed up with your carrier bundle.
Regards, Peter

Class type not defined for this object type

Hi Friends,
Could u please guide me ?..We have a requirement to extract some data from classification system.
This is related with class type 023 - Batch
I want to use the following parameters in CTBW.
basis datasource :Z_BATCH_ATTR
class type : 023
object table :MCHA
Datasource type : ATTR
I am getting an error "Class type not defined for this object type" when i enter the above entries in CTBW.
The only way I'm being able to make this work is changing object table from MCHA to MCH1.
This solution does not fit me bacause MCH1 table dont have Plant as Key, and I need it.
Do you know what should I do to solve this?
Thanks in advance

Hi,
I believe we have to use the list of standard "Basis DataSource", as I'm also stuck with the same issue. Let me know what Basis Data source you selected in this case.
As I'm trying to extract Batch attributes from "AUSP" Table.
I have given class type= 023
Obj Table= AUSP
But not sure which "basis datasource" I need to select.
Thanks,
Satish

Exchange rate type not defined for country

Hi All,
I have noticed an error message during testing of postings using tax codes. The error message nbr is FF802 (Exchange rate type is not defined for country XX). When we are testing postings on accounts for which tax code is ignored (not relevant) it is ok. Could you please let me know where exactly we have settings and how it is related to the tax codes ? I have never seen that connection previously.
Thanks,
Points will be rewarded afterwards.
Tomasz

Hi Tomasz,
The exchange rate types are defined at country level in General Settings and the company codes with that country can access that. Normally the exchange rate types are defined as M, P, B and G. M is for average rate and is used in FI, while P is for planning in CO.
Regd
Bharat

Build failed:"Message type not defined" - can't dereference schemas in MDS?

Similar Messages

Maybe you are looking for