Build number after Patch 6 not raised in CMC

Hi guys,
I am currently using BI 4.0 SP 2 Patch 4 deployed on NW 7.3 (Linux) as WAS and Windows Server 2008 R2 as a Intelligence tier (running SIA). I have installed Patch 6 both onto WAS and Windows as well.
Patch 6 installation on both Windows and Linux went fine.  Predeployment of .sca files and their deployement via JSPM went successfully as well. My only concern is that when I log on to CMC I do not see the build number raised. It is still as it was at Patch 4 - 439. In fact, the build number for Patch 6 is 481 (as visible under Windows Programs and Features after Patch 6 installation).
Is this normal? Shouldn't the CMCs build number be also raised? My concern is whether the predeployment couldn't take older web applications for generating .sca files somehow.
Any idea?
Thanks.
Erik.

Hi Dave,
In Central Management Console, select Settings from top drop-down menu > Properties > Build Number.
In my case I see there the following:
Build Number:  439 
Product Version:  XI 4.0
Erik.

Similar Messages

  • Cannot select serial number after patch upgrade to PL 27

    Hi,
    We have just upgraded to PL 27. As all the items are managed by serial number, we find that we are unable to select certain serial number when we are performing deliveries, return or invoicing. The funny thing is not all the serial number are affected. For example, out of 10 available serial number, 2 can be selected and the rest cannot.
    Any idea what causes it?
    Regards,
    TWP

    Hi,
    We are also facing the same issue when we try to upgrade the patch level to PL27 for one of our client. After few days of testing we found out that it seem to be a major bug in PL27 where by you will not be able to select most of the serial number after you sort the serial number table. You might need to try with different user or create another user which haven't apply the sorting as a temporary workaround method because we have try to remove the sorting but it cant be done. Thus, we create/try with different user without applying the sorting and it worked. To fix the issue permanently, you will need to revert the issue to SAP.
    Regards,
    cakong

  • Display build number in application.

    I found a few old threads about this with no solution, but nothing recent. Does anyone know if there is a simple method to display the version number of an executable built with the application builder. I have the build set to auto increment this, and would like to be able to see that build number in the installed application.
    For clarities sake I mean the build number of the exe, not the build number of the subsiquent installer I create.
    At the moment it seems I must manually assign a version/build number and make it visible in the application. For this I use a seperate 'about' vi available from the main routine.
    All suggestions welcome.
    I'm using LabVIEW 8.6.1 on Win XP
    Best Regards,
    Bandit.
    Solved!
    Go to Solution.

    I'm not sure about this, but what if you would try using a Property Node (Programming -> Application Control palette) with a property of Application -> Version Number.
    If I put it in a block diagram of an ordinary VI it returns the current version of my LabVIEW program. But if you put it in an EXE and if you would set up the version for that EXE, maybe it would return that value instead. 
    Have never tried this, maybe you could give it a chance.
    While evaluating my code please have in mind that I am a LV novice. Therefore sometimes my code might violate some coding rules that I have to learn about myself. But how else could I do that...
    Chart zoom with "Mouse Over" effect

  • [svn:fx-trunk] 11529: Removing the short lived rsls directory b/ c the textlayout swf will have the correct build number for packaging

    Revision: 11529
    Author:   [email protected]
    Date:     2009-11-06 13:05:51 -0800 (Fri, 06 Nov 2009)
    Log Message:
    Removing the short lived rsls directory b/c the textlayout swf will have the correct build number for packaging
    QE notes: no
    Doc notes: no
    Bugs: no
    Reviewer:
    Tests run: no
    Is noteworthy for integration: no
    Removed Paths:
        flex/sdk/trunk/frameworks/rsls/

    I am modifying the correct httpd.conf file on the server, it just doesn't seem to work. - If I put the rewrite rules in the <Directory /> the rewrite works but it adds /Library/WebServer/Documents to the URL.
    I also tried putting the rewrite rules in <IfModule mod_rewrite.c> but that did not work either.
    mod_rewrite is enabled and running on the server.
    I will post the rewrite rules again in the code brackets. Sorry for the long post. - If some one can try them out on their Leopard Server to see if they can get them to work, it would be much appreciated. Again, these work on my Leopard Client but I can't get them to work on Server.
    -- The httpd.conf file posted above is just the default conf file found in /private/etc/apache2/
    <code>
    RewriteEngine On
    Options +FollowSymLinks
    RewriteRule ^(.+)/$ http://%{HTTP_HOST}$1 [R=301, L]
    RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.php(.*)\ HTTP
    RewriteRule (.+)\.php(.*)$ $1$2 [R, L]]
    RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.asp(.*)\ HTTP
    RewriteRule (.+)\.asp(.*)$ $1$2 [R, L]]
    RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.aspx(.*)\ HTTP
    RewriteRule (.+)\.aspx(.*)$ $1$2 [R, L]]
    RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.htm.(.)\ HTTP
    RewriteRule (.+)\.htm.(.)$ $1$2 [R, L]]
    RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.cfm(.*)\ HTTP
    RewriteRule (.+)\.cfm(.*)$ $1$2 [R, L]]
    RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.bak(.*)\ HTTP
    RewriteRule (.+)\.bak(.*)$ $1$2 [R, L]]
    RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.inc(.*)\ HTTP
    RewriteRule (.+)\.inc(.*)$ $1$2 [R, L]]
    RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\..(.)\ HTTP
    RewriteRule (.+)\..(.)$ $1$2 [R, L]]
    <code>

  • Function module "GM_DOCUMENT_REVERSE" not found.  after Patch Update

    Hi Abapers/Basis
    After patch update i am not able to do FBCJ reversal entry getting below error message.
    Runtime Errors         CALL_FUNCTION_NOT_FOUND
    Exception              CX_SY_DYN_CALL_ILLEGAL_FUNC
    Date and Time          25.05.2011 14:43:26
    Short text
         Function module "GM_DOCUMENT_REVERSE" not found.
    What happened?
         The function module "GM_DOCUMENT_REVERSE" is called,
         but cannot be found in the library.
         Error in the ABAP Application Program
         The current ABAP program "SAPLRWCL" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
         not caught in
        procedure "CALL_DISPATCHER_STORNO_R" "(FORM)", nor was it propagated by a
         RAISING clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        The program "SAPLRWCL" contains the CALL FUNCTION statement.
        The name of the function module to be called is "GM_DOCUMENT_REVERSE".
        No function module exists with the name "GM_DOCUMENT_REVERSE".
        All function modules are listed in the Function Library (SE37).
        Possible reasons:
        a) Wrong name specified. Pay particular attention to
           upper/lower case and underscores ("_").
           or
        b) Transport error
        c) In the case of an enqueue/dequeue module,
           the lock object may not have been activated
           (ABAP/4 Dictionary).
    How to correct the error
        Check the last transports to the SAP System.
        Is the program "SAPLRWCL" currently being changed?
        If an enqueue/dequeue module is involved, is the activation
        of the lock object missing in the ABAP/4 Dictionary?
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "CALL_FUNCTION_NOT_FOUND" "CX_SY_DYN_CALL_ILLEGAL_FUNC"
        "SAPLRWCL" or "LRWCLF10"
        "CALL_DISPATCHER_STORNO_R"
        Function modules with names similar to "GM_DOCUMENT_REVERSE":
        GM_DOCUMENT_CLOSE
        GM_DOCUMENT_RECORD
        GM_DOCUMENT_DELETE
        GM_DOCUMENT_POST
        GM_DOCUMENT_CHECK
        G_DOCUMENT_RECORD
        GJ_DOCUMENT_RECORD
        GM_DOCUMENT_PROJECT
        GET_DOCUMENTS
        GM_DOCUMENT_DISPLAY
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    Moderator message: please don't just dump your dumps, search for SAP notes or open a call with SAP instead.
    Edited by: Thomas Zloch on May 25, 2011 2:16 PM

    Hi Karthik,
    Thank you for ur reply.
    I did not implement any user exit/ badi. Dump is saying that my smarform function module does not exist in the se37 library.
    I have excuted my form through se38, that time is working fine. When i tried through output type it is going to dump.
    Regards,
    Kusuma.

  • P780 signal issue after upgrading build number

    Recently i had upgraded build number P780_ROW_8G_S227_141121 after upgradation both sim card showing no sim signal on handset 
    how to solve this problem please suggest .even factory restore password not accepting .
    Regards
    Wasi

    I think you confuse standalone dbconsole with centralized gridcontrol. There's only ONE command to start database control: emctl start dbconsole. This command will start the integrated agent,too. No need to start the agent separately.
    Werner

  • Build Number of Exchange 2007 Server Not Change when Installed Rollup 14 updated

    I have a project to Upgrade Exchange Server from 2007 SP2 to 2013 with Lastest update. I found in Upgrade Instruction required Update Exchange Server to atleast 2007 SP3 RU10 version
    Installation of Service Pack 3 was successful. and I continue to install RU14 patch... Installation look Complete but build number of Exchange Server wasn't changed. and I already to Update Windows Patches to lastest update and restart but build number is
    same
    I try to reinstall RU14 patch by Powershell with administrator credential ,configure Execution Policy to Unrestricted and following are MSI verbose mode log
    Rollup.log
    Thanks

    I have a project to Upgrade Exchange Server from 2007 SP2 to 2013 with Lastest update. I found in Upgrade Instruction required Update Exchange Server to atleast 2007 SP3 RU10 version
    Installation of Service Pack 3 was successful. and I continue to install RU14 patch... Installation look Complete but build number of Exchange Server wasn't changed. and I already to Update Windows Patches to lastest update and restart but build number is
    same
    I try to reinstall RU14 patch by Powershell with administrator credential ,configure Execution Policy to Unrestricted and following are MSI verbose mode log
    Rollup.log
    Thanks
    http://blogs.technet.com/b/exchange/archive/2010/03/08/3409469.aspx
    Dude, where's my rollup?
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Patch Level not reflecting in Support Package Levels after applying

    Hello,
      MDM_TECH 555_700 patch 01 are applied to A65. But the patch is not
    getting reflected in the package level.
    We are still unable to view the component in OCS queue, even after
    uploading the component. Still the MDM_TECH 555_700 is showing
    the patch level 0.
    Please provide any solution to make the patch level reflect.
    Thanks & Regards
    Vijay

    Hi Chaitanya,
    I'm facing the same issue. We are upgrading Solution Manager 7.0 to EHP1. I cannot implement the Notes 791984 , 1015068 and 1022755 since the OCS is locked with the error in DDIC_Activation. Could you please let me know how did you implement the corrections?
    Cheers,
    Savitha

  • Ciscowork 3.2.1 daemon manager is not working after patch installation

    Hi Team
    Ciscowork 3.2.1 daemon manager is not working after patch installation.
    C:\Documents and Settings\Administrator>net start crmdmgtd
    The CiscoWorks Daemon Manager service is starting.
    The CiscoWorks Daemon Manager service could not be started.
    The service did not report an error.
    More help is available by typing NET HELPMSG 3534.
    Also I checked syslog.log and it is showing below error
    an 17 14:39:34 127.0.0.1 100: <28>   dmgt[1316]: 2507(W):Daemon manager anonymous user has not been set up: 00000569
    Please suggest.
    With Regards,
    neena

    During installation, an user casuser is created with certian security settings and if those are modified\removed, DM will not start.
    Following message will be seen in /log/syslog.log
    Daemon manager anonymous user has not been set up: 00000775
    To solve the issue, run resetcasuser.exe located under /setup.support  to  recreate the settings.
    Make sure casuser account is not locked out. Make sure casuser is a member of casusers group and is set to "password never expires".
    Additionally you can try to make casuser a member of adiministrators group.
    -Thanks

  • Ciscowork3.2.1 daemon manager is not working after patch installation

    Ciscowork 3.2.1 daemon manager is not working after patch installation
    Hi Team
    Ciscowork 3.2.1 daemon manager is not working after patch installation.
    C:\Documents and Settings\Administrator>net start crmdmgtd
    The CiscoWorks Daemon Manager service is starting.
    The CiscoWorks Daemon Manager service could not be started.
    The service did not report an error.
    More help is available by typing NET HELPMSG 3534.
    Also I checked syslog.log and it is showing below error
    an 17 14:39:34 127.0.0.1 100: <28>   dmgt[1316]: 2507(W):Daemon manager anonymous user has not been set up: 00000569
    I reset the casuser password and restarted the service but still no luck....
    Please suggest.
    With Regards,
    neena

    Neena,
    Check the properties of casuser under Start > Settings > Control Panel > Administrative Tools > Computer Management > Local Users and Groups > Users and make sure it is not disabled or locked out.  The only thing checked should be "Password never expires".  Change anything required and reset casuser.

  • Xcelsius 2008 Version/Build Number not Changing

    Hi All - quick question.
    I have applied all SP/HF's in order and my build number is still reading as this in the help section:
    Xcelsius Version 5.1.1.0
    Build Number 12,1,1,344
    I did not encounter any erorrs when installing the SP/HF's.  Has anyone else encoutnered this problem?

    Hi Micheal,
        Goto > Control Panels > Add / Remove programs. and check whether all the service packs and hot fixes are listing there?
    Also goto the installation path and right click on Xcelsius.exe and see what is the version number and build number for your xcelsius.
    Regards,
    Vinay

  • AS Java applications not starting after patching from 2004s SPS10 to SPS11

    Hi folks,
    after patching our NetWeaver 2004s from SPS10 to SPS11 and the Kernel from 7.00.83.0 to 7.00.95.0, the applications on the AS Java do not start up automatically any more.
    Under the following URLs, the same error is shown:
    http://<fully qualified host name>:51000/
    http://<fully qualified host name>:51000/nwa
    http://<fully qualified host name>:51000/sap/monitoring/SystemInfo
    http://<fully qualified host name>:51000/useradmin/
    http://<fully qualified host name>:51000/wsnavigator
    http://<fully qualified host name>:51000/uddiclient
    503   Service Unavailable
    SAP J2EE Engine/7.00
    Application stopped.
    Details: You have requested an application that is currently stopped
    http://<fully qualified host name>:51000/webdynpro/welcome/Welcome.jsp
    itself works, the two links Content Administrator and Web Dynpro Console both lead to the same 503 error described above
    On http://<fully qualified host name>:51000/irj, the error message is different:
    com.sap.engine.services.deploy.container.ApplicationInManualStartUpException:
    Application sap.com/com.sap.portal.fpn.accessservice cannot be started because is in MANUAL start-up mode..
    Exception id: 09:33_09/05/07_0003_102709250
    See the details for the exception ID in the log file
    In std_server0.out we have the following entries, right after the list of all services that were started:
    ServiceManager started for 39904 ms.
    Framework started for 46720 ms.
    SAP J2EE Engine Version 7.00   PatchLevel is running!
    PatchLevel January 31, 2007 18:37 GMT
    May 9, 2007 9:40:19 AM  com.sap.portal.prt.sapj2ee.error [SAPEngine_Application_Thread[impl:3]_3] Fatal:
    The last line with com.sap.portal.prt.sapj2ee.error is listed another 131 times, and there is also the following message:
    ### Excluding compile:  com.sapportals.portal.prt.jndisupport.util.AbstractHierarchicalContext::lookup
    We can connect to the system using Visual Administrator. Under Server->Services->Deploy, most applications are not running. It is possible to start a few applications manually, others however do not start showing different exceptions.
    We have AS ABAP and AS Java installed, as well as BI, DI, EP and EPC. AS ABAP seems to be running fine.
    We have also noticed the following deviations in JSPM:
    BC_FES_IGS is Release 7.00 SP Level 7.0
    EP_BUILDT is Release 7.00 SP Level 10.0
    SAP_BUILDT is Release 7.00 SP Level 0.0
    All other components except for the Kernel are Release 7.00 SP Level 11.0 or 11.2
    What could be wrong, and what can we do to solve it?
    Best regards,
    Robert Schulte

    Thanks for your response, usha rani
    1. We already tried that, unfortunately, it does not help
    2. We checked the kernel version thoroughly after you suggested it, everything seems to be fine. We had a Unicode kernel before, and we still have one.
    3. safemode is already set to NO
    4. J2EE's default.trace is full of exceptions, but none of them is pointing me into a helpful direction.
    Perhaps the exceptions mean more to someone else:
    java.lang.Exception: Exception loading and instanciating sub-manager:
    com.sap.caf.km.repositorymanager.CAFSecurityManager
    (java.lang.ClassNotFoundException: com.sap.caf.km.repositorymanager.CAFSecurityManager)
    com.sapportals.wcm.repository.runtime.CmConfigurationProvider#
    sap.com/irj#com.sapportals.wcm.repository.runtime.CmConfigurationProvider.Component
    <SetRoomIdForDiscussionObjects> will not be available.
    Failed to load class
    <com.sap.netweaver.coll.room.impl.filter.DiscussionSetRoomIdPropertyFilterManager>
    #J2EE_GUEST#0####1e820b50fe4111db8e780013724175b4#SAPEngine_Application_Thread[impl:3]_22
    ##0#0#Error##Plain###
    java.lang.ClassNotFoundException:
    com.sap.netweaver.coll.room.impl.filter.DiscussionSetRoomIdPropertyFilterManager
    com.sap.portal.prt.runtime.broker#sap.com/irj#
    com.sap.portal.prt.runtime.broker#J2EE_GUEST#0####
    1e820b50fe4111db8e780013724175b4#SAPEngine_Application_Thread[impl:3]_22##0#0#
    Error#1#/System/Server#Java###
    [PortalServiceItem.startServices] service initialisation failed:
    tc.eu.odi.conn.uwl|OdiBridgeService
    [EXCEPTION]
    {0}#1#com.sapportals.portal.prt.core.broker.PortalServiceInstantiationException:
    Could not instantiate implementation class com.sap.tc.eu.odi.conn.uwl.OdiBridgeService
    of Portal Service tc.eu.odi.conn.uwl|OdiBridgeService because: could not load the service
    com.sap.engine.services.deploy.container.ApplicationInManualStartUpException:
    Application sap.com/com.sap.portal.fpn.accessservice cannot be started
    because is in MANUAL start-up mode.
    There are many more entries in default.trace.

  • Adobe Acrobat 8 Professional does not accept the correct serial number after reinstallation

    Adobe Acrobat 8 Professional does not accept the correct serial number after reinstallation, what to do?

    Thank you Bill. You could help me with the answer and the one in the other forum:
    "Acrobat has a separate installation process and needs to be activated with your Adobe ID I think. The question on CC is really one for the folks in the CC forum (Adobe Creative Cloud), not the Acrobat forum".
    I could resolve things with Adobe CC. I don´t need my old Acrobat 8, but I could finally install Acrobat XI Pro - and this time it seems to work, without permanently crashing down.
    Thank you.

  • Adobe Acrobat 8 Professionals does not accept the correct serial number after reinstallation

    Adobe Acrobat 8 Professionals does not accept the correct serial number after reinstallation, what to do?

    Moved to Acrobat Installation & Update Issues

  • How do I specify the build number when deploying an iOS application (not version number)

    I'm looking for a way to specify the application's build number when deploying an iOS application.
    Currently in the -app.xml file, you can specify a version number by using:
    <versionNumber>1.0.24</versionNumber>
    But when submitting to the iTunes Connect store, I want to be able to submit the new updates as a build change, and not version change to avoid the approval process again.
    Can this be done ?
    Thanks in advance.
    -Daniel

    Hi Gig52,
    Unfortunately, there is no way for you update/modify/increment the build/version number information from the command line. You will have to set that via the Project Explorer. You could check the box labeled Auto Increment in the Version Information property to have the version number automatically increment each time you build your application.

Maybe you are looking for