Build project to take measurement

Hi, I tried to build a project to take measurements. Firstly i select New VI, then right click on the block diagram and try to select input>>DAQ Assistant, but i couldn't see it, i only see Instrument I/O Assistant, and even i drop this on my block diagram, i got the error message said "MAX or the Instrument I/O Assistant is not installed correctly. Please install these fro the LabVIEW Drive CD". Currently I have MAX ver14.0 and for LabVIEW is evaluation copy 2014. Thank you very much for the help.
regards,
Yutao

Thanks Jeff.
I very likely will purchase LabVIEW 2014 very soon. do i need to remove this drivers before i install the purchased 2014 LabVIEW (i believe it come with the drivers for sure), or when i install, these drivers just been overwritten then there won't be any conflicts.
Currently i have NI sound & vibration suite (purchased), after i purchase 2014 labVIEW, before i install it, I will remove the Evaluation copy and all associated files. As you know, all NI downloads are just show one line in Control Panel called National Instrument Software, the software are not seperated listed
In short, i just want to remove the Evaluation LabVIEW and asscociated drivers/files to avoid later conflicts (maybe i worry too much), but not remove the NI S&V I have. What i should pay attention when i remove the evaluation copy and what is the easier way to do? Or i just don't need to worry.
thank you for the help.
Yutao

Similar Messages

Weblogic workshop 10gR3 - Very slow in building projects and throwing error

Hi All. I am working in a portal project with weblogic 10gR3. I am using 4GB RAM machine with Windows XP and Intel Core2 T5600 processor. Whenever I build my set of projects, workshop takes very long time to build the project and at end of it throws "There was an error running some portal verification, not all validation complete". Please let me know anyone else faced the same issue.
Things tried out by me:
1. new domain
2. workshop restart
3. closing all applications other than workshop to allow more memory space for build process
but nothing helped me on it. Please let me know if someone aware of the fix.
regards.
Nanda
Edited by: Nanda on Jan 27, 2011 2:37 PM

Hi Nanda -
Are there any exceptions in the Error Log view in Eclipse, or in the <workspace>/.metadata/.log file that seem relevant? Also, which version of 10gR3 is this -- 10.3.0 or 10.3.2? You can check via the Help | About... item -- if it says it's Eclipse 3.5.0, then it's WLP 10.3.2; WLP 10.3.0 will say it's Oracle Workshop for WebLogic 10.3.
How many projects do you have? What types are they? How many artifacts in each (e.g. .portlets, .portal, pageflows, ejbs, etc.)?
You can also turn off Portal verification for now. Go to Window | Preferences | Validation, then uncheck the WebLogic Portal Validator and WebLogic Portal XML Validator boxes and hit Ok. You won't get warnings in the Problems view about .portals and .portlets, but you can see if it's part of the problem. Another general thing that pops up around performance is interaction with an underlying virus scanner -- if possible, try making sure your real-time virus scanner is skipping your project folders and your BEA_HOME.
Greg

I want to track progress on my building projects with a tick sheet

Hi All
I want to use a ticksheet to track progress on my building projects.
I have between 10 and 15 projects running simultaniously, I would like to prepopulate the ticksheet and give the tick a value.
So when waking onto a site i would like to just tick work completed then get a % complete and be able to save/output/print etc. with a date stamp.
example:
                              Item value     Total value
setting out                   =1%          1%
digging trenches           =2%          3%
Footing                        =5%          8%
So I will get a grand total% if all ticks are ticked will be 100% if not all ticked the unticked value will be deducted from 100%.
Hope this makes sense.
Thank you

You may wish to repost in iOS apps section for Numbers. Most of
what you want seems doable; I am not sure about date stamp but
it may be doable using presence/absence of tick to make date entry
in a cell.
There are some very capable people answering questions in that
forum who should be able to provide a solution. It will probably
take some setup on your part; but after the initial work, you should be
able to touch a few cells to get the results you desire.

BlazeDS locking $ProjectName-debug folder and not allowing flex builder to build project

Hi all,
Im new to Flex. I'm trying to setup my development environment. What I've noticed is that when blazeds is started and I run a flex project, it creates a folder in the blazeds root folder named $ProjectName-debug (replace $ProjectName with the actual project name). Once this folder is created, and the flash page is accessed, it cannot be deleted until blazeds is actually stopped. The files on that folder seem to be locked. While this folder is locked, eclipse cannot seem to re-build the project (specifically clean). Thus every small change I make to the project, I'm currently having to stop blazeds, clean the flex project, start blazeds, run the flex project.What makes things worse is that I have to start our application along with blazeds so it can retrieve the data from the app (which takes a few minutes).
I'm wondering if other people are having to go through this pain or if they've figured out a way to get around this. I would ideally like to have a way where I'm able to rebuild the project and hit f5 and reload the page and see the changes. I understand this is not possible with debug.
If anyone has figured out a way to incorporate blazeds to their development environment in a more practical way, please let me know. We just switched from tapestry/gwt to flex. We used to be able to update on the go thus development was much simpler.
Regards,
Udam

if you see a red error in your "problems" tab inside
flexbuilder, your project most likely will not be built fully, or
correctly, in that case running that project does not makes sense
at all, you need to make sure "problems" tab is clear of errors
(you might see warnings, but they are not very harmful) .if ther is
no errors, hitting ctrl+B builds the project and choosing Project
--> Clean ... clears output folder and rebuilds the project P.S
Unless you uncheck checkbox that says "automatically build project
after clean".
IMHO, turn off Auto Build and manualy build the project that
will take care of most issues, plus use (project --> clean) when
you need to make sure you have latest build .
Kind Regards
Levan.

I am trying to use my adobe premiere elements 12 and when I go to click on a "new project" it takes me to the sign in page. Once I type my information in and click on "sign in" a little 'thinking circle' pops up and it just keeps spinning

I am trying to use my adobe premiere elements 12 and when I go to click on a "new project" it takes me to the sign in page. Once I type my information in and click on "sign in" a little 'thinking circle' pops up and it just keeps spinning but it never ends up doing anything. Please help me with this issue. I really need to get this project started like yesterday. Thank you.

dplum12
What computer operating system is your Premiere Elements 12 running on? Did you have the opportunity to update 12 to 12.1 Update yet using an opened project's Help Menu/Update? If not, please do so when you get the opportunity.
For now I will assume that your computer is Windows 7, 8, or 8.1 64 bit. Please try the following suggestions to overcome your Premiere Elements Sign In issue.
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
and, if you get any messages about Internet connect and the computer clock, please review the following
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
Please let us know the outcome.
Thank you.
ATR

Error: The folder does not contain a valid Flex Builder Project.

HI All,
My first Post here. I am new to Flex Hardly 10 days old. I
want to open the flexstore project in flex builder 3 and could not
able to do so.
What I did: file->import->.... got the error msg as
"The folder does not contain a valid Flex Builder Project".
also tried file->import->general->..... same error
msg.
I need your Help guys
I downloaded the sample project from
http://examples.adobe.com/flex2/inproduct/sdk/flexstore/srcview/index.html
Thanks in Advance
SAS
Text

"shakeb66" <[email protected]> wrote in
message
news:gknbn8$av9$[email protected]..
> HI All,
> My first Post here. I am new to Flex Hardly 10 days old.
I want to open
> the
> flexstore project in flex builder 3 and could not able
to do so.
> What I did: file->import->.... got the error msg
as "The folder does not
> contain a valid Flex Builder Project".
> also tried file->import->general->..... same
error msg.
> I need your Help guys
> I downloaded the sample project from
>
>
http://examples.adobe.com/flex2/inproduct/sdk/flexstore/srcview/index.html
Try creating a new Flex project and dragging the files from
the zip into the
src folder. You may find that you need to rearrange things a
bit, depending
on how they set up the project, but this should get you
started.
HTH;
Amy

DNG SDK build project cannot find the xml sdk

On win7/x64. Installed dng sdk and all dependencies per the readme files. xml sdk built OK with vc10 express, as 64 bit static and dll.
But the vc solution for dng_validate has incorrect names for the xml sdk build projects, so it cannot find those components. Specifically it looks for "..\..\..\xmp_sdk\build\vc\XMPCore.vcxproj". the actual paths in the xmp sdk are different and longer, like "..\..\..\xmp_sdk\build\vc10\dynamic\windows_x64". Moreover there is no XMPCore.vcxproj there.
I suppose the real problem may be that the dng sdk project is trying to build it as .net managed code, while the xml sdk was built as open code. So I guess what I am looking for is a way to build the dng sdk open.

I would confirm your post, but I have not found a solution. I wish someone at Adobe would look into this.

Error -17704, Build project failed in CVI

I'm using CVI7.0 with TS3.0.
When I configure the CVI adapter to be in debug mode, the TS uses tscvirun.prj to run an additional instance of the CVI code for debugging. As soon as TS finishes to load this project I get the run-time error:
Build project failed in CVI for the project c:\....\tscvirun.prj.
Error Code: -17704; CVI ActiveX automation server command failed.
Any idea where to start looking?
p.s. This entire project was copied from another pC where I don't have this problem. I did a lot of comparing between configurations of the two pCs but found nothing.
Thanks

Rafi2003 -
Does the original tscvirun project that TestStand installs work with the example on the failing system?
To validate this you may need to repair TestStand so that the tscvirun files are refreshed and try the examples to make sure things are working properly on the system before attempting to use the files from the second system.
If you rerun the insaller, one of the available options will be to perform a repair.
Scott Richardson (NI)
Scott Richardson
National Instruments

[svn:osmf:] 11292: Removing 'libs' as a library path from the Flex Builder project properties.

Revision: 11292
Author:   [email protected]
Date:     2009-10-30 02:28:09 -0700 (Fri, 30 Oct 2009)
Log Message:
Removing 'libs' as a library path from the Flex Builder project properties.
Modified Paths:
    osmf/trunk/framework/MediaFramework/.actionScriptProperties
    osmf/trunk/framework/MediaFramework/.flexLibProperties

Revision: 11292
Author:   [email protected]
Date:     2009-10-30 02:28:09 -0700 (Fri, 30 Oct 2009)
Log Message:
Removing 'libs' as a library path from the Flex Builder project properties.
Modified Paths:
    osmf/trunk/framework/MediaFramework/.actionScriptProperties
    osmf/trunk/framework/MediaFramework/.flexLibProperties

Linking library with flash builder project?

I have a flash builder project going and I have found I need to make various movie clips and sprites in in Flash Pro. Is there a simple way to just link my library from the .fla project to my builder project so I can access the assets made in the .fla?
I'm using the latest version of both software packages.
Thanks!
-SGW

Open your .actionScriptProperties file and set useFlashSDK to false. This will allow you to use your older SDKs. They are managed in the same way as Flash Builder 4.6 when this option is changed.

Load Flex/Flash Builder project in Flash Professional CS5

Is there a way that I can load (or export) Flex/Flash builder project in Flash Professional CS5?
As it turns out we got Flash Prof for our team, but it may look like we actually need Flash builder to build lots of UI related stuff..

Specifically, I want to use flex chart in CS5. Is there a way to do this?
Message was edited by: bart2335658
And flex ui

Bug: Menu option "Build project" is disabled

I have "Build automatically" disabled due to the poor compiling performance of FB (my project has hundreds of classes), and have instead attached a key binding to "Build project" to trigger a build manually.
Unfortunately this option is very often not available, although I have made changes in the project (and saved them).
Yet right-clicking the project, and selecting "Build project" does a build then.
Obviously there is a bug detecting when a build is required or not.

Build project is disabled if you have no project selected in the package explorer/navigator.
Unfortunately, the logic for detecting the project associated with what objecthas focus is not implemented well in Eclipse (see https://bugs.eclipse.org/bugs/show_bug.cgi?id=201650)
That means that if you go to Problems view or switch between editors in a certain way, Build Project gets disabled.
The short of it, it is an Eclipse bug and has been fixed for 3.6 (which is what the next version of Builder ships with).
Thanks,
Anirudh

How can I take measurements in PS5?

Hey Folks,
I'm a current Elements user and have been looking into PS5 for the Mac to solve a problem. What I need to do is take measurements within a photo. Here's the scenerio...
We're cataloging trays of food, before and after its eaten...school trays. We take photos at a slight angle to the tray so we can get a better view instead of an overhead photo for example. This way we can see what was was left in a glass for example. What I'd like to be able to do is to load an image into Photoshop and give it some measurement reference such as an inch in whatever direction; horizontal, vertical. Then have a grid placed over that photo in inch increments so we can better calibrate how much of any given item is left.
First, can this be done in Photoshop? Second, if so what version do I need? "Standard" or "Extended?"
Many thanks,
~Steve

Unless I'm mistaking your needs this is far easier than people are letting on.
4 options come to mind, there are probably more.
1. Menu: View>Show>Grid. This puts a grid overlay over your entire image. In preferences you can set the color of your grid and the size and number of increments. I think one inch increments with quarter inch subdivisions may be the default. Make it whatever you need.
2. Use the Marque selection tool to draw a box around the object in question and read the size of the box made in your info pallet.
3. Use the Ruler tool to draw a line across the span you'd like to measure and view the readout in the Info pallet.
4. View>Show>Rulers and pull guides out from the rulers around your objects and read their coordinates on the ruler scale.
I'm imagining your needs are simple and estimatory, thus Grid would be the fastest to flash on and off so you can get an estimation of several objects at once. Of course these only work from shot to shot if your subjects are all shot to the same scale.

Is it possible to get a count of all the class files in a Flash Builder project?

Is it possible to get a count of all the class files in a Flash Builder project?
Thanks!

Resultsets are one per connection unless you have copied them. Do you have lots of connections are you properly reusing them or at least closing and discarding all references?
See tutorial and Javadoc of API too

Captivate 4 crashes while working with Power Builder projects..Can anyone help to solve this issue??

Captivate 4 crashes while working with Power Builder projects..Can anyone help to solve this issue??

Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD

Build project to take measurement

Similar Messages

Maybe you are looking for