Build specification freezes when trying to view "Shared Variable Deployment" screen

Labview 2009 f3
For some strange reason, any applications that include shared variable libraries will no longer build into executables.
I was able to build these applications without issue a week ago.  However, when I went to make an updated build today, the build failed and I had to force Labview to close.  When I view the build specification properties, I can navigate through all the option screens except the "Shared Variable Deployment" screen.  As soon as I click on that option, the interface freezes up and I have to force Labview to close.
This problem does not occur for applications that do not include shared variable libraries.
I tried removing the shared variable libraries from the applications that were failing, but that did not correct the issue.

I never did find a proper fix to this issue. 
One day I attempted to build the application again, but this time I got distracted doing something else.  When I finally checked the build status a few minutes later I expected it to still be frozen, but to my surprise I found that the application did successfully build.  To this day, that particular application still looks like it is going to lock up, but about about 8 minutes later it finally takes off and builds like nothing was wrong...like every other shared variable application I have created.  So I guess my only suggestion is to let the application sit for a while and see what happens. 

Similar Messages

  • IE 9 freezes when trying to view in explorer mode.Sharepoint 2013

    One of our users is trying to use the "open in explorer" option in ie 9 and when he clicks on the link the browser freezes and nothing happens. 
    He is using IE 9,  Windows 7, the webclient is running.  What else can I check?

    Try couple of things and see if helps.
    1) Try adding site URL to Local Intranet Zone
    Internet Explorer --> Tools --> Internet Options --> Security Tab --> Select Local Intranet --> Click Sites Button --> Click Advanced Button --> Type the URL --> Click Add --> If your site is using http then make sure you uncheck
    the check box for https (if checked). --> Click OK --> Click OK --> Close the browser and start again.
    2) Uncheck Automatically detect settings in IE
    Internet Explorer --> Tools --> Internet Options --> Connections Tab  --> LAN Settings Button --> Uncheck 'Automatically Detect Settings' checkbox. --> Click OK --> Click OK --> Close the brower and start again to verify.
    Amit

  • ! when trying to view photos in full-screen

    Hi,
    Hopefully someone will be able to help me with this.
    When I try and view some photos in full-view a grey box with an exclamation mark in a grey box appears. I've managed to locate the original photo files in the correct place in my iPhotos folder on my hard drive. I can see my photos on the standard format in iPhoto and when I first imported them I could see them in full-view. I haven't modified any of them, the only thing I've done is upload them onto facebook!!
    I've checked and I've got the latest version of my iPhoto.
    I'm not sure what to do next! Hope you can help,
    Anna xx

    Yeah I renamed a folder in my iPhoto Library Folder and these are the photos I can't see.
    *It is strongly advised that you do not move, change or in anyway alter things in the iPhoto Library Folder as this can cause the application to fail and even lead to data loss*
    If I rebuild the database will it solve my problem
    No it won't.
    Your options now are two:
    1. Return things in the iPhoto Library Folder to exactly the way they were
    or
    2. Create and populate a new library.
    To create and populate a new library:
    Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
    Most people who rename things in the iPhoto Library Folder do so because they believe it will make finding pics easier. However: There are many, many ways to access your files in iPhoto:
    For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    Rolls in the iPhoto Window (View -> Film Rolls) correspond exactly with the Roll Folders in the Originals Folder in the iPhoto Library Folder. You can move photos between Rolls, you can rename rolls, edit them, create them, as long as you do it via the iPhoto Window. Check out the Info Pane (wee 'i', lower left) the name and date fields are editable. Edit a Roll Name using the Info Pane, the Roll Folder in iPhoto Library Folder/Originals will also have the new name.
    Regards
    TD

  • When trying to view videos in full screen, It changes to the gray start up screen picture...

    , and the video disappears. Any idea how to fix? Im on an early 2008 white macbook 13 inch. Running Software  Mac OS X Lion 10.7.5 (11G63). Thanks !

    Hello, adammusic. 
    Thank you for visiting Apple Support Communities. 
    I would need a little more information regarding this issue to provide a better answer.  However, it sounds like you are experiencing and issue with your MacBook restarting.  Here is an article that I would recommend going through if you are experiencing that issue. 
    OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem."
    http://support.apple.com/kb/HT200553
    Cheers,
    Jason H. 

  • Why do i keep getting this message when trying to view a movie: The shared library "iCloud Purchases" is not accepting connections at this time. Please try again later.

    why do i keep getting this message when trying to view a movie: The shared library “iCloud Purchases” is not accepting connections at this time. Please try again later.

    Same issue. What are they doing?
    Macbook Pro Retina Yosemite 10.10.2

  • Safari 5.0.5 freezes & crashes when trying to view pdf

    For some reason safari 5.0.5 freezes & crashes when trying to view pdf
    Any ideas how to fix this issue?

    Hi
    that's usually due to a plug-in over-riding Safari's built-in pdf support.
    Quit any browsers & remove any 'pdf...' plugins from either of these folders
    Home/Library/Internet Plug-Ins/
    Mac HD/Library/Internet Plug-Ins/

  • Visual Studio 2013 hangs/freezes when trying to click the designer view

    my Visual Studio 2013 update 1 hangs/freezes when trying to click the designer view, after clicking "Design" I can not click "split" neather "Source". What can I do ? I already tried to set the "HTML (Web Forms) Editor
    " as "Default"... thanks for support.
    In VS2010 the same worked fine.
    I "Run as Administrator".
    ty for help

    Hi,
    I assume that you are not using VS2013 Express version. In order to get the reason about the hang issue, please use devenv /log to gather activity.xm log and find HR error from this log.If it shows some package corrupt, try to repair your VS.
    Here are my general suggestions:
    Please try to run devenv /ResetSettings (in command prompt) to eliminate the related potential settings problem.
    Try disabling Add-ins (e.g. “Tools” | “Add-in Manager”) or run “devenv.exe /SafeMode”.This can eliminate the possibility that third party Add-ins or packages are causing problems. Also you can try these command lines:
    devenv.exe /resetskippkgs and devenv.exe /resetuserdata 
    Try to create a new user account. This can help isolate user profile corruption related causes.
    If the suggestions above are no help, please reinstall your VS.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error message when trying to view/print Crystal reports in B1

    I get the following Error message when trying to view/print crystal reports in SAP B1/Crystal Reports Integration Tool for SAP Business One:   
    " Could not load file or assembly 'Crystal Decisions Windows Forms, version=12.0.2000.0, Culture=neutral, Public Key Token=692fbea551e1304'  or one of its dependencies.  The system cannot find the file specified.  ????

    Hi
    Common issues for this :
    1. Once you install crystall add on ,you need to go to Crystal report Administration >Account setup .
    Put on the user name and password and click on creating ext tables
    Try then running the report .
    If not the case ,
    make sure you install runtime .
    You need :
    1.Crystal report basic from SAP download -(Not necessary if you want only report viewer >
    2.You need to have crystal integration addon (I think service pack is SP1)
    3.Make sure you have runtime install
    When you are installing ,make sure you restart your PC before you do or remove temporary file s
    Hope this solves your issue
    Bishal

  • Palm Desktop shuts down when trying to view calendar by month

    I'm using a Palm TX with the latest edition of Desktop installed (I think that's 6.2).  Everything is normal except, suddenly, I cannot view my calendar in monthly view.   Daily, weekly and yearly all work fine.  Desktop shuts down when trying to view in monthly view.  I did a system restart, a Desktop reinstallation, a download of the latest version and installation of that version and, finally, uninstallment of the existing Desktop, download of the newest version and installation of that version.  Nothing seems to enable me to view the calendar in monthly view.  This is a spontaneous event.  I've been running Desktop on a Vista Ultimate system since February without incident.  I have no idea about how to solve this.
    Thanks
    Post relates to: Palm TX

    Well, here's where we are now.  It's a good thing that I have desktop on my office computer because when I tried a Hotsynch with my home desktop, Hotsynch wiped out all the data on my handheld and then hung up both the handheld and desktop in the middle of the Hotsynch.  I'm going to overwrite the entire handheld with the office desktop file.  As for the home setup, I'm thinking the only thing I can do now is uninstall Palm and wipe out the entire directory of files.  Am I correct about this?  Do I need to do a clean uninstall?
    Post relates to: Palm TX

  • Creative Zen Vision 30Gb Stuck in Recovery Mode, Freezes when trying to deal with Firmware

    My Zen Vision is stuck in Recovery Mode. The PC recognizes it but it comes up as 50mb Storage Media. When you touch Reload Firmware or Format All, it freezes and you have to pull the battery out to shut it off. I don't know what to do. Charges fine, never said anything about HARDWARE issues, just can't get it to not freeze when trying to load firmware back onto it.

    I did the same thing, my unit was working perfectly.
    I just read that these players have a laptop 2.5 hard dri've installed in the unit. If this is true, the next chance I get, I will take my unit apart (40 gig nomad zen xtra) and see if I can reinstall the firmware directly. It's probably what they do at the repair sho
    ps.
    Check it out, It may be worth a try!!!

  • Ipod nano 5th generation freezes when trying to play a song or video

    Within the last couple of day my ipod nano 5th generation started freezing whenever i tryed to play a song. Oly way i could turn it off was by resetting it, however it did not fix the problem and still freezes whenever i try to play a song. I have even restored it to factory setting and it does the exact same thing. I don't understand why it does this, does anyone know why it freezes and won't stop? i don't have any warrenty on it and want to know if it is fixable, because it just randomly started freezing when trying to play music. If any one knows why it would be appriacted to know.

    Does this happen with any song or video you play?  If so, then my best guess would be a hardware issue since a restore to factory settings did not resolve it.
    B-rock

  • ERROR (0×0107, 0×0000) WHEN TRYING TO VIEW A VM CONSOLE

    Hi,
    Getting error (0×0107, 0×0000) when trying to view  vm console via vmm installed on a machine registered to different domain.
    When tried  to connect to the VM it will be asked to authenticate against the host and then we will see a warning about an un trusted certificate
    and once we click OK we will receive the (0×0107, 0×0000) message.
    Tried importing certificate of the hosts to the Trusted Root still seeing the same error. Can anyone please help?

    Hi sathish777,
    Because each domain has its secure boundary ,domain trust is needed for comunication between different domain .
    As a workaround , you may try to logon the "client" locally to be a workgroup machine then use hvremote.swf to manage the hyper-v server remotely :
    https://code.msdn.microsoft.com/Hyper-V-Remote-Management-26d127c6
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • When trying to view a pdf from IE10 I get a small square with an X and not the document.

    When trying to view a pdf from IE10 I get a small square with an X and not the document. I have removed reader completely from the control panel and reinstalled version 11.0.4. I have IE 10 10.0.9200.16721. Need assitance in getting Reader XI setup.

    Hi,
    We have heard few users having similar issue as yours and found out the problem for one of the users is this: http://support.microsoft.com/kb/2716529 .
    I was able to reporduce this problem(square with a 'X') by changing the TabProcGrowth registry entry to 0.
    This tool provided by Microsoft is for Win 8, to run this on Win 7 you can manually change the registry setting : please see " Let me fix it myself" in above url.
    Before running these steps please make sure yours indeed is the same problem.
    Please be very careful as some registry settings (not this one) can create serious problems on a Windows system including causing it to no longer boo
    Let me know how it goes.
    Thank You.

  • IPhoto freezing when trying to import photos from iPhone

    iPhoto has started freezing when trying to import photos from an iPhone. The device is recognised but just get "loading . . . " message with no photos appearing. Has anyone else seen this?

    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • My mac freezing when trying to connect to a web site

    My Mac freezes when trying to connect to a website

    What browser are you using? Try using another one to see if it is an application problem or a system wide problem.
    Firefox

Maybe you are looking for