Build tools language resources - amd64 "packages missing" Installation stuck

I am installing the VS2015 Enterprise RC, the first installation went well, but after the second one, the installation pauses asking, package missing, download from internet or search in this address? I chose the internet one, and the installation has
never advanced ever since, the package that is missing is "build tools language resources - amd64", and it is still acquiring this package.
Tao Wang

Hi ,
Export location provided is not correct , make sure files exist as per  requirement.
Import directory 'C:\Documents and Settings\belis\My Documents\NW7.02\NWASABAPTRIAL70206\SAP_NetWeaver_702e_Export\DATA_UNITS\EXP1' does not exist;
Import directory 'C:\Documents and Settings\belis\My Documents\NW7.02\NWASABAPTRIAL70206\SAP_NetWeaver_702e_Export\DATA_UNITS\EXP2' does not exist;
Import directory 'C:\Documents and Settings\belis\My Documents\NW7.02\NWASABAPTRIAL70206\SAP_NetWeaver_702e_Export\DATA_UNITS\EXP3' does not exist.
Regards,

Similar Messages

  • Deploying manually CC PKG file built with CC Packager. Not using any third party deployment tool. However after each 5 installations, the PKG files corrupt and cannot be use for a 6th installation. I have to build a new PKG file using CC packager.  Why ?

    Deploying manually CC PKG file built with CC Packager. Not using any third party deployment tool. However after each 5 installations, the PKG files corrupt and cannot be use for a 6th installation. I have to build a new PKG file using CC packager.  Why ?

    http://helpx.adobe.com/creative-cloud/packager.html
    http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

  • Missing Package(s), Installation Corrupted

    Un Gusto saludarlos.
    Queria pedir su colaboracion,
    Descarge las Imagenes de VMware y tengo la licencia DEMO de DMS 5.3, instale dichas maquinas virtuales y no se genero ningun inconveniente, el DMM y en SnS, mas sin embargo al levantar dichas maquinas virtuales se me muestra el siguiente error:  "
    Missing Package(s), Installation Corrupted, algun concejo que me puedan brindar, intente instalarlo nuevamente en repetidas ocaciones y siempre obtengo el mismo resultado.
    De antemano agradezco muchisimo su ayuda.
    Exitos y bendiciones.}
    Saludos.....
    Adjunto imagen de error

    Hello jbtb07, 
    Welcome to the forum! After almost two months of trying to sort out an order issue, I can understand why you would be fairly fed up with dealing with this issue. I am sorry to hear that you may not have ever received the headphones, and that you are still trying to find a resolution to this. 
    Using the email address you registered with your forum, I was able to locate the order. It appears that a resolution was provided to you, and so I am sending you a private message with further details. You may check your private messages by signing into the forum then clicking the envelope icon in the top right corner of the page. 
    Respectfully, 
    Tasha|Social Media Specialist | Best Buy® Corporate
     Private Message

  • I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1

    I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1. Antworten auf Deutsch wären super!

    As far as I know there is no download resource for older Macromedia programs and it is highly unlikely that one as old as version 3 of Fireworks will be able to work on a Windows 8.1 system.  I was unable to get a Studio 8 version installation on a Vista system, and likely even an XP system (cannot remember that far back).

  • VS 2013 Build tools installation fails with error "Signature or catalog could not be verified"

    VS 2013 ultimate - Build tools installation fails with error "Signature or catalog could not be verified" for MSBuild assemblies. Any idea what could be the problem?
    Thanks
    NM

    Hello,
    Do you mean you are trying to use this tool:
    https://www.microsoft.com/en-us/download/details.aspx?id=40760
    Can you navigate to your %temp% folder and filter by date to see the log of the Build tool?
    I want to know which assemblies failed to be verified.
    By the way, since MSBuild is embed in Visual Studio why you want to install this again? Do you have any error about this Build Tool when you install Visual Studio 2013 Ultimate?
    “Signature or catalog could not be verified” is always related to corrupt source
    , please double check you have a healthy network and then try the web installer again.
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • EP BUILD TOOL Missing

    HI,
    We are tyring to develop EP application using NWDI. We are missing the SC EP BUILD TOOL in the software catalogue in SLD. How to upgrade the software catalogue?
    We are on EP 7 SP 14 version .
    I have downloaded the EPBUILDT<version> . Deployed it through SDM. Still I cannot see it under Software catalogue in SLD.
    How can we update ?
    Thanks,
    Portal

    Hi,
    Create a new DC and sync the sources. When I was trying to sync the sources to the old DC which I created it was still causing the problem, but when I created a new DC and sync'ed the sources it worked.
    Goip

  • OpenG Package Builder tool 0.1-alpha6 released

    Hello Everyone,
    There is a new version of the OpenG Package
    Builder tool (ogrsc_package_builder package) available. This tool
    allows you to create package files that can be installed using VI Package Manager.
    This release resolves an issue caused by a LabVIEW 8.x bug with handling variant coercion (see here for bug details).
    See here for more info about this release.
    You can download and install this library (as well as all the OpenG libraries) using VI Package Manager.
    Thank you,
    Message Edited by Jim Kring on 03-04-2007 10:58 PM
    Attachments:
    package_builder.png ‏28 KB

    Bob Y. wrote:
    OK,  but what is it and why should I use it?  What need does it fulfill?  I have been unable to find much documentation for this at the wiki page and maybe a couple of paragraphs here would help.
    Thanks,
    Bob Young
    Hi Bob,
    Yes, this info got burried.  Basically, it's a tool for building LabVIEW-based software products.  It is highly flexible/extensible and tries to fill the holes left by LabVIEW's built-in Application Builder.  Here are some good links to more info:
    OpenG Builder Homepage
    OpenG Builder 1.0 Documentation
    Thanks,
    -Jim

  • TestStand 4.2 Error String not found in language resource files

    I've installed TestStand 4.2 on two Windows XP machines.  On one machine it worked fine first time. On the other machine I receive the following message in the login box, and also in the templates pane:  'String not found in language resource files." I have tried uninstalling and re-installing TestStand twice but still get this error.  This error prevents me being able to login as an administrator so I am unable to use TestStand 4.2. I understand that these language resource files are provided by the installer but for some reason it seems that the machine with the error cannot locate these.
    The only difference between the two XP machines that I can find is the location of user profiles.  I note that on Vista compatible TestStand versions that TestStand user settings are stored to C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.2\Components on XP machines.  On the XP machine with the error all user profiles are stored under C:\profiles, rather than C:\Documents and Settings.  This is the standard profile used by our company so I am unable to change this. The TestStand installer does recognise this and installs TestStand user settings to  C:\profliles\All Users\Documents\National Instruments\TestStand 4.2\.  Does anyone know whether the location of the user profiles is important, or whether there is another cause for this error?
    Regards,
    David
    Solved!
    Go to Solution.

    Hi Scott,
    I've held off on the changes suggested by John for now.  You are correct in that the knowledge base article referenced by John does not apply since the engine does initialise. 
    I've attached two screen shots.  The first one is the standard login box which displays the "String Not found in language resource files" message in place of the usual "administrator" user name.  If I overwrite the  "String Not found in language resource files" user name with "administrator" and click OK to log in then I get an "Invalid User Name" error dialogue box. Therefore I am unable to log into TestStand.
    The second screen shot shows the TestStand sequence editor with the String Not found in language resource files visible in the templates pane.
    Regards,
    David
    Attachments:
    TS Login Prompt.JPG ‏11 KB
    TS Seq Editor.JPG ‏75 KB

  • Illustrator Shape Builder Tool:  After the latest CC update, the tool alters shapes once edited instead of just removing/adding the desired shape.  Anyone else run into this and/or have any fixes?

    I am using a PC and installed the latest update of all the CC programs I use (AI, PS, AE, etc.) and within Illustrator I've noticed the Shape Builder Tool doesn't behave exactly as it did in the past. (And not in a good way.)
    Previous versions allowed me to edit/add/remove shapes from one another without issue (leaving all shape paths as they were before the editing while making the desired alterations), but the newest behavior seems to alter existing paths once shapes are merged/deleted making the tool almost non-usable. 
    Not sure if there's a check box I'm missing or what, but have done some brief research on the problem and haven't found anything helpful.  If anyone has run into this issue and/or knows a way to correct it, I would greatly appreciate it
    Thanks!

    Please show a screenshot before and after.

  • Could not complete your request because a required text resources file is missing.

    When choose the type tool in CS6 on my mac I get an error message "Could not complete your request because a required text resources file is missing." Any help to get it all back to normal would be great:)

    Done Font Book checks and restores then I performed a font check and PS crashed.

  • "Language Resources" Tab - What is the use in WebDynpro?????

    Helo Guys,
    Does someone know how to use the "Language Resources" Tab under "Web Dynpro Content Administrator".
    This Tab is located near the "General","References" and "JCO Connections" tabs.
    It is clear that it is related to Resource Bundle for translations but I couldn't find any documentation related to the use of this Tab.
    Thanks in advance for your help.
    Best regards
    Harry

    Hi Harry,
    you are right, the documentation of the Web Dynpro content administrator is not updated yet concerning this feature.
    Here a short description of my side:
    - the tab can be seen as a <b>I18N-test-tool</b> for checking the displayed texts based on a given session locale.
    - the tab is only a viewer, it does not imply any editing functionality (for the deployed resource bundles).
    - on top the current session locale and the VM locale is displayed
    - the first table displays all resource bundles contained in the selected Web Dynpro project.
    - the second table allows to simulate session locales by selecting an entry in a drowpdown listbox. You can the see the text value which is loaded by the Web Dynpro Runtime for the selected (session) locale based on the available resource bundles.
    Regards, Bertram

  • Shape Builder tool

    Hey all!
    I am working on a logo that has an anchor in it. I drew the anchor myself using the pen tool, straight line tool, and eliptical tool. It appears that everything is smoothly connected and I have rounded out the corners of my anchor, and also put a round cap on my adjoining lines.
    I then highlighted the whole anchor and pressed cmd+J (I am working on a Mac) to join all the edges in an attempt to make the anchor one whole shape, which I intend to fill one solid color.
    However, when I use the shape builder tool, Illustrator does not recognize my anchor as one solid shape. When you hover your mouse over a solid shape, the Shape Builder tool has a dotted pattern inside your shape. This is not happening in my anchor. I painstakingly went over each "joint" and made sure that they were connected, with no avail.
    There has to be something I am missing here.. Anyone have any suggestions? They are much appreciated!
    Thanks in advance.

    Have you viewed it in the Layers Panel? This is the easiest way to see how many paths really exist.
    You could also convert the selection to a Live Paint object and then fill it with the Live Paint Bucket tool.

  • Bonjour, je veux installer i tunes et le message d'erreur est "Un problème s'est produit sur ce package windows installer. Un programe nécessaire pour que cette installation puisse se terminer n'a pas pu être executé. Contacter votre service suppott ou le

    Bonjour, j'essaye d'installer i tunes mais le message d'erreur apparaît !:
    "un problème s'est produit sur ce package windows installer. Un programme necessaire pour que cette installation puisse se terminer n'a pas pu être exécuté. Contacter votre servive support ou le distributeur package"
    Pourriez vous m'aider? merci

    Bonjour, j'essayerais d'utiliser le Adobe cleaner tool.
    http://www.adobe.com/fr/support/contact/cscleanertool.html
    ou de reinstaller le download assistant. (pour ajouter les fichiers manquants)

  • Building example project, said windows.h missing

    I amusing the example from
    http://zone.ni.com/devzone/cda/tut/p/id/5189
    But when building it, it said 2 files missing as attached, 'windows.h' and 'commctrl.lib'.
    I searched and found their path on disk as below.
    \Program Files\National Instruments\LabVIEW 8.5\PDA\Utilities\VC\SmartDevices\SDK\PocketPC2003\Include\windows.h
    \Program Files\National Instruments\LabVIEW 8.5\PDA\Utilities\VC\SmartDevices\SDK\PocketPC2003\Lib\armv4\commctrl.lib
    \Program Files\National Instruments\LabVIEW 8.5\PDA\Utilities\VC\Windows CE Tools\wce500\Windows Mobile 5.0 Pocket PC SDK\Include\Armv4i\windows.h
    \Program Files\National Instruments\LabVIEW 8.5\PDA\Utilities\VC\Windows CE Tools\wce500\Windows Mobile 5.0 Pocket PC SDK\Lib\ARMV4I\commctrl.lib
    Attachments:
    shot.JPG ‏23 KB

    Hi Turbot,
    You should be able to do this if you save the file from the web link to your computer.  Then add the VI to a PDA project for an emulator (I used a Windows Mobile 5.0 Emulator).  You then just need to make a build specification by right clicking on Build Specifications and selecting New Application.  Make the Event Structure Demo.vi a top level VI and then build and deploy.  I have attached a few screen shots that will help you.  This first is my project, the second is the build specification showing the VI added as a top level VI.  The last is the emulator running the vi.  I hope this helps.
    Stephen S.
    National Instruments
    1 Test is worth 1000 expert opinions
    Attachments:
    PDA Build Spec.jpg ‏45 KB
    Emulator.jpg ‏30 KB
    PDA Project.jpg ‏41 KB

  • Change the application builder's language

    Is there a way for developers to change the application builder's language?
    My location is in Germany but I prefer the american-english language during development; in case of normal usage of my Apex-Appl. (as a normal end user) I'd like the "german way"...

    Hello,
    If you look in the Oracle® Database Application Express Installation Guide, paragraph 4.7 :
    The Oracle Application Express interface is translated into German, Spanish, French, Italian, Japanese, Korean, Brazilian Portuguese, Simplified Chinese, and Traditional Chinese. A single instance of Oracle Application Express can be installed with one or more of these translated versions. At runtime, each user's Web browser language settings determine the specific language version.
    The translated version of Oracle Application Express should be loaded into a database that has a character set that supports the specific language. If you attempt to install a translated version of Oracle Application Express into a database that does not support the character encoding of the language, the installation may fail or the translated Oracle Application Express instance may appear corrupt when run. The database character set AL32UTF8 supports all the translated versions of Oracle Application Express.
    In the rest of the doc there is a description how to install other languages...
    Greetings,
    Roel
    http://roelhartman.blogspot.com/
    http://www.bloggingaboutoracle.org/
    http://www.logica.com/

Maybe you are looking for