Build/Transition times off when exported to Quicktime

I have four Keynote presentations I have built, each of which has several Quicktime movies placed on multiple slides (not the same movie multiple times). I then have Keynote text and shape objects "interacting" with the movies as they play. In Keynote, I have set my build and transition times to perfectly match the content of the Quicktime movies.
Example: I have a movie that was captured from my screen wherein I select various menu items. In Keynote, as the various menu items are selected in the movie, I have Keynote text and arrows pointing to the relevant areas of the movies. "Click File...", "...then Save As..." etc. Looks great when presented in Keynote.
When exported to Quicktime (full size, high quality, Sorensen Video 3) the timing gets worse as the movie progresses, to the point that at the end some of my timings are off by almost 10 seconds or more!
Any ideas why this happens? The export to Quicktime is happing on a dual-processor 2.7GHz G5 with 4GB RAM... should be more than adequate!
Robert

Cheers for that, Kyn. Funny, I spent about two hours reading through page-by-page all the forum topics to see what issues people were coming acorss BEFORE I posted. Don't know how I missed this one though! Guess I should try searching next time.
Thanks,
Robert

Similar Messages

Recording off when exported to Quicktime

I created a presentation in Keynote, then recorded the slideshow to add voiceover. I then exported to QuickTime, with the recorded timing feature checked off. All seemed good, until about 3 slides into the presentation and the voiceover was off a slide. Almost as if the timing didn't record correctly. It plays perfectly in Keynote. Any easy workarounds? I am using this process with my students, so the simplier, the better.

Cheers for that, Kyn. Funny, I spent about two hours reading through page-by-page all the forum topics to see what issues people were coming acorss BEFORE I posted. Don't know how I missed this one though! Guess I should try searching next time.
Thanks,
Robert

Jittery motion with stills when exported to Quicktime

I've been producing photographic AVs with FCE for a few years now and I've run into a problem with the latest version (3.5).
Any time I use keyframes to do a Ken Burns effect it gets all jittery when exported to Quicktime. Everything plays back fine within FCE - it's only when exported that the problem occurs. The problem didn't exist (for me) with version 3. It seems to be exacerbated by adding a transition but it happens even when there's no transition.
Has anyone experienced this or have any idea what I might be able to do to remedy it.
regards and thanks
powerbook 1.5ghz 1.25 GB RAM Mac OS X (10.4.7)

That's what you did when you switched the field
dominance to none, but you see you didn't see any
effect when you did that.
No, none at all.
I have a fairly major show on Friday night (it's Wednesday pm here now) so I'm thinking I might spend the night redoing it in iMovie. I'm disappointed because I've been doing them in FCE for a few years now and this is the first time I've seen a problem. The only thing which has changed is the jump from 3 to 3.5.
Many thanks for your suggestions.
//kk

IMovie 11 crashes when exporting to Quicktime

iMovie 11 crashes when exporting to Quicktime. Some people have posted that this problem disappeared when they upgraded from Lion to Mountain Lion. However, I am running Mt.Lion and it still happens. If there is no fix for this bug, does anyone know a workaround that will produce the same ultimate result..namely, a Quicktime movie that is not too large to attach to emails. Apple, please fix this. Thank you.

Update after two Apple iApps specialists spent 1.5 hours on the phone with me: There are 3 "poison pills" (that we know of) that will cause the crash if any of the three is part of the movie: Picture-in-picture, side-by-side, or a circle open/close transition. Otherwise, no crash. The specialist made a movie on his own computer, containing the poison pills, but he exported to Quicktime without a crash. There is at least one report in the threads of a problem like mine. Thus, some Gremlin is causing this, in some computers. The iApps specialist was curioius to know whether a lot of people have this problem, or only a few. (If a lot, then it is worth submitting to the engineers to fix.) He said if you have this problem, call Apple. I asked if such people should post a "Me too!" on this thread. He said no, better to call Apple and report it. So that's the story. I can live without those poison pills in my export-to-quicktime movies. I am just a consumer, not a pro, and I can live with it. But it would be nice if Apple could fix this.

Audio doesn't work when exporting to Quicktime

Hi there.
I've imported a FLV file with audio into a Flash file. When
previewed as a swf, the audio works, but when exported to
"Quicktime Video" (not the "Quicktime" setting) the audio doesn't
play.
I've double checked my Quicktime settings (ie the audio isn't
Disabled, and i've tried Animation, Video, None and MPEG-4
compression) but the audio still doesn't play.
The weird thing is, if i have a Quicktime movie playing in
Quicktime and then open my Quicktime Video file from Flash then the
audio in the first Quicktime cuts out.
Also in Quicktime the info on the Quicktime Video from flash
says it has a Audio Track with the settings I exported it out as,
but I'm still not getting any audio.
Does anyone know what's going on?
Thanks in advance

Anyone?
or is my question not making sense?
Thanks in advance

Final Cut Express FCE Crashes when exporting to Quicktime or Quicktime conv

Final Cut Express FCE Crashes when exporting to Quicktime or Quicktime conversion!
This started completely out of the blue last night. The export gets about 30-50% done and FCE disappears from the screen and the "FCE quit unexpectedly" message pops up. This has never happened before and I was doing exports of this very project all week. All other projects won't expect, the current project won't export when brought into a new file, I tried reinstalling FCE, and I deleted the pref files spoken about in the forum.
Any Ideas!!!????

Try repairing permissions and re-boot.
Al

Presentation timing way off after export to Quicktime

I built a presentation with several embedded Quicktime movies. Want it to play all the way through automatically. Plays beautifully in Keynote, but when I export to Quicktime timing is way off. Individual clips have lots of extra time on the first or last frame. Tried all sizes of export, tried recording and then using recorded timings, but nothing works.
I'm offering free beer to anyone who has the answer.

Did you take into account the transition times. That has thrown me off a number of times. Do you have the Fit Slideshow to music option selected?
Another application that creates, IMO, terrific slideshows is PhotoPresenter. It has 25 or more themes and can save the slideshow, with Fit slideshow to music, to a variety of formats, QT, for iPod, HD, etc. This is one of their many themes.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

6 minute Keynote with video clips keeps crashing when Export to Quicktime?

I have a very important presentation I need, it has some video clips in I created in LiveType, and I export to Quicktime, using the default settings, it keeps crashing. The last time I tried it was this morning, it processed for 2 hours, at the last slide was when it froze up and crashed my computer. I am in desparate need of help. What am I doing wrong? I am using Quicktime Pro 7.0.4
Thanks in Advance for your reply to my Post,
Sebastian

I have a very important presentation I need, it has some video clips in I created in LiveType, and I export to Quicktime, using the default settings, it keeps crashing. The last time I tried it was this morning, it processed for 2 hours, at the last slide was when it froze up and crashed my computer. I am in desparate need of help. What am I doing wrong? I am using Quicktime Pro 7.0.4
Thanks in Advance for your reply to my Post,
Sebastian

FCP project not the correct aspect ratio when exporting to Quicktime

Hello All;
I am trying to export a FCP project in its native resolution (1440 X 1080) to Quicktime but everytime I try, the aspect ratio is messed up and people look taller and thinner than they should.
The project is a resolution of 1440 X 1080 as determined by examining the sequence settings in FCP.
I configure quicktime (see below) to a resolution of 1440 X 1080.
So why isn't my Quicktime video the correct resolution when I play it with the IMac's Quicktime player ? I shrink the player to 1/2 size to fit it all on the screen.
My exact settings are below ...
Export - Using Quicktime Conversion
Format - Quicktime Movie
Video Settings - Compressor - MPEG-4
Quality - Best
Not sure if I changed the framerate - if I did, I probably changed it to 29.97
I didn't touch the other settings in the video settings - left them to default
I didn't change the filter settings - I left them at default
Size - 1440 X 1080 (The actual resolution of my source video)
I checked the box - preserve aspect ratio using letterbox (If applicable)
Other settings were left at default
Sound Settings - Format - AAC
Rate - 48 KHZ
Render Settings - Quality - Best
Target Bitrate - 128 KHZ (This was left at default - I did not change it)
Prepare for Internet Streaming - Fast Start checked (This was default - I did not change it)
All other settings not specifically mentioned were left at default.
Thanks. Tim

I don't have much of an answer for you, but to test try not checking the preserve aspect ratio. Rather than reexport the entire 1 hour just export 10 seconds so that you can trouble shoot different things.
Hope that helps a bit,
Eric

Error -50 when exporting to quicktime MPEG-4

Alright so here's the deal:
I have made a movie (obviously) it plays fine in iMovie, no glitches or anything. Unfortunately since the video files have already been compressed once, I am trying to export it using a setting that will not compress it again. I have found this setting(MPEG-4) under "Export using Quicktime..." and then disable the compression. Everything looks fine until you click save, in which case I get an error -50.
Now I know this is fairly unlikely, but is anyone a super whizz that would magically have a solution to this problem ?

When you are selecting None, you are not turning off compression, you are turning off the video track. That will lead to a -50 error.

General error when exporting to Quicktime from FCE

I've built a slideshow with still photos, text, and audio. I've done this at least 20 times. When I start exporting to Quicktime, as I want to burn a dvd in iDVD, the export stops at 27% completed and I get a "General Error". there is no explanation. I've rendered the single sequence many times and it says ok. It plays fine in FCE but won't export to Quicktime. How do I correct the problem?

I think I had the same problem that you are now having. I would get unexpected errors when trying to:
1) Log and Transfer videos to external hard drives.
2) Save my exports to an external Hard Drive.
3) Copy large video files to the External Hard Drive.
Assuming that you are using an external hard drive, chances are that isn't formatted correctly. It cannot be formatted in FAT32 or else large files (usually video) over 4GB cannot transfer. It may be that the file you are trying to export is larger than 4GB. If it is currently formatted FAT32 it needs to be formatted to Mac OS Extended. Hope I was of some help.

Keeping chapter markers intact when exporting as QuickTime file

Created a 30-minute video in FCP7. Exported using QuickTime Conversion (H.264 file).
When I pulled that QT file into iDVD (wanted a menu from there for this project instead of DVD Studio Pro, this time) -- chapter markers are gone.
How to get them back?

Exported using QuickTime Conversion (H.264 file).
Why are you exporting as QT conversion to H264? The iDVD authoring process automatically encodes your source files to MPEG 2. You are going through an unneccesary compression cycle that is degrading your video.
Do this from FCP instead: File > Export > QuickTime Movie > Current Settings > Self Contained.
Make sure the marker selection button shows "All Markers" or just "Chapter markers"
Bring that file into iDVD and let it do the rest.

No audio when exporting to Quicktime

I am attempting to export a movie that has both silent clips and clips with sound. In iMovie the sound clips have the expected audio, but when I try to Export to Quicktime Movie I have no audio at all. My intention is to eventually burn this movie to a DVD to play on a stand-alone DVD player connected to my TV. FYI, I tried exporting numerous times with different option settings including (1) unchecking "Prepare for Internet Streaming", (2) Prepare for...Fast Start, and (3) Prepare for...Fast Start Compressed. None of these worked.

The reason I think this is worth trying... A G5 should have enough processor speed, but it lacks a graphics card that can offload the processor for some of the heavy lifting...therefore less resources available for audio.
Also, I would recommend that you create a duplicate of your project and cut it down to about 5 minutes or less (go to Project Library. Right-click on project name, and select Duplicate). Then you can test this without waiting 4-5 hours.

Final cut pro problem when exporting with quicktime movie

Hello!
I must have som help beacuse my musicmovie must be finsihed untill today. I have a movie their i had used filters like colour correction and interlace. When i export with USING QUICKTIME CONVERSION and have
keyfram 10
bitrate 6000
faster encode
size 1920x1080 HD 16:9
its not a problem the movie works fine all the way.
But when i export with QUICKTIME MOVIE it dosent work. Some clips are frozen and some are beeing misscoloured. None of them have interlace. Its the same clips that dosent work everytime i had export with QM. I have tried to replace these clips but the same thing is happening. I dont understand why i cant use quicktime movie but it works with quicktime conversion.
If you have an e-mail i can send you just the part where this happening.
Please help me!
Thanks Gabriel

I am also expriencing the same error. Tried every solution listed so far:
1. Switch off background rendering. Trash render files. Don't render. Export.
2. copying the project within Final Cut Pro into another project
3. remove the following folder: Library > Application Support > ProApps > MIO > RADPlugins > XDCAMFormat.RADPlug
Nothing worked. I try to export to Vimeo, YouTube, and master. All error right at 9%
What's going on?

Error -61 and -43 When Exporting using Quicktime

I have recently began receiving errors when I try to export using QuickTime. When I try to export to my external hard drive I get an error -61. When I try to export to Documents I get an error -43
These errors began after I had imported a bunch of home videos yesterday which were pretty massive and filled up my hard drive. I then began to delete some of my videos from my Event Library and Projects that I no longer needed.
It was after I did this that I began to experience these errors.
Any tips, suggestions, or advice would be greatly appreciated.

How are you deleting your movies to free up disk space? Are you doing them in iMovie by rejecting them? If so, that's only 1/2 of what you need to do. In the event where you deleted movies, from the pop-up menu at the bottom of the events, choose "Show rejected only" . Then click the button that says "Move rejected to trash" in the top right. You then have to empty your system trash to free up the space.
Lemme know if that works.

Build/Transition times off when exported to Quicktime

Similar Messages

Maybe you are looking for