Builded executable doesn't close the main VI front panel

I created an application with the Application Builder. All of it runs well, except that when the operator ends the program, the front panel of the main vi (the only top-level VI) remains open.
Moreover, inside the VI window appears the toolbar with only the Run button on (in the VI properties I choosed to hide toolbar and menu bar).
Is there a way to close the front panel when the program completes execution?
Roberto
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

I ussually use the "Quit LabVIEW" function found in the application control palette when application finishes. I use a utility that checks to see if it is running in the development or run time enviroment and only quits LabVIEW if it's in the run time enviroment.
This wouldn't work to well if you were running other LabVIEW programs though.
Brian

Similar Messages

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately.

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately. Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time? Something like it works in Gmail. I do not want to use set lists, I want to enter different addresses each time I send an email. And I am a very slow typist, so I don't want to type the first few letters of each recipient's name. It is much faster for me to just click on the e-mail addresses in the list as a group. It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group. If there is a solution to this, please tell me. Thanks.

Vatlily,
Try this:
1. Select Mail>File>New Message.
2. Select Mail>Window>Address Panel.
3. Use (command+click) on the desired addressees in the Address Panel to create the list.
4. Click "To:" on the top left of the Address Panel.
The group that you selected will be added to the "To" field in your New Message.

How to close the main window from Popup

hello all,
i need to close the main window from a popup, so i create a popup and after clicking on close button of this popup, should also the main window be closed.
how can do this please?
BR

Hi
Please go through this.. check thomas reply
Re: Close Main Window directly on action on Pop up window
also check this..
how to close main window on click of a button on popup window
cheers,
Kris.
Edited by: kissnas on May 12, 2011 5:06 PM

Firefox will open a New Pop-up Window in Windows 7 Aero. When trying to Close it, it thinks it wants me to Close the Main Window. Why?

I use Windows 7 Ultimate in Aero-mode. When a new Firefox window is opened, or a Pop-up window appears, I can't close it without first clicking on that page and clicking the "X" in the corner. Instead, whenever I try to close a window that is not the first window (my main window), it will ask me if I want to close the main window with all the tabs... I have noticed some other slight quirks in this stable release as well, but this one is always present.

When I hover over the window, it does come up front, but as soon as I press the red "X" it goes immediately back to the main window and acts as if I was trying to close that one. Once in a while it will work, but shortly thereafter, it will just go back into this manner. Quite odd. This is the first time I've truly had any problems with Firefox.
In addition to that problem I have noticed a few things, but one that may be linked is sometimes I'll click a link. Although I haven't specified to open it in a new window, it will do so anyhow. This gets annoying quickly. Usually shutting down Firefox and reopening will fix this (and once in a while just leaving it be for a long time). Somehow, I think this issue is somehow linked to the one above.

Docking the "Main" and "Controller" panels

In the past, all versions of Flash allowed you to dock the
Main and Controller panels under or in the top portion of the
program. CS4 doesn't seem to allow the docking of these panels any
longer... Is this just a simple thing that they forgot or am I
missing something? I can drag the panels to the top, but they are
floating, not actually docked to anything. I tried moving them all
over the program to see if they were "dockable" somewhere else and
they are not.
Any ideas or is this something I will have to get used to?
Thanks

Unfortunately those two are not panels in the same sense that
everything else is. They were -supposed- to become panels, but for
some reason they did not. Basically it's a bug, it's been reported
and will have to be revised in a future version.

I try to open two sub vi front panel in third - main vi front panel.

I have two sub vi, and I`d like to see this two vi front panel in main vi front panel window. Does anybody can answer me , If it`s possible?

Click here for a recent related discussion.
Or have you thought about using a tab control? You can organize controls in pages and have those controls call sub-VIs with or without displaying the front panel of the sub-VI. See the Tab Control Properties.vi example that ships with LabVIEW.
From any LabVIEW window, select Help from the window menubar, then Find Examples >> Search, then enter "tab control" (without the quotes) in the box labeled Type a keyword to find:

How can i update the spreadsheet in front panel

Hi all,
I need to update the datas read from excel sheet in labview front panel in same format( as a spreadsheet). I placed the spreadsheet in front panel from activeX object. but i could not insert the data inside it. Because the read data from spread sheet is 2D string array but the spreadsheet in block diagram is refnum indicator. what should i do to place the data in Spreadsheet in labview front panel.
Thanks in advance.

http://forums.ni.com/ni/board/message?board.id=170&message.id=26319&requireLogin=False
.......^___________________^
....../ '---_BOT ____________ ]
...../_==O;;;;;;;;_______.:/

Is the iPhone 4 front panel made of glass or plastic

Is the iPhone 4 front panel made of glass or plastic?

Glass.
The internal components are situated between two panels of aluminosilicate glass, described by Apple as being "chemically strengthened to be 20 times stiffer and 30 times harder than plastic," theoretically allowing it to be more scratch resistant and durable than the prior models.[9]
http://en.wikipedia.org/wiki/IPhone_4
Message was edited by: b j t

Connecting the chassis-mounted front panel audio I/O module to the X-Fi Extreme Mu

Hello to everybody.
Many pc chassis provide two audio connectors on the front side, usually for the headphones with microphone.
I need to know if I can connect the chassis-mounted front panel audio I/O module to the Sound Blaster X-Fi Extreme Music.
I saw that the X-Fi Extreme Music has the internal connector (named AD_EXT) to connect . Is there a pin mapping of the AD_EXT connector? Is it possible to connect the chassis-mounted front panel I/O module cable to the proper pin of the AD_EXT connector?
Thank you.

Hi and thank you for your response.
Unfortunatelly I actually haven't got a X-Fi card, because I need to know if I can connect the chassis-mounted front panel audio I/O module to the card before buying it.
For this reason I don't know what is the J you're talking about. Is it an internal connector avaiable in the X-Fi Extreme Music card? Can I use this J to connect the chassis-mounted front panel audio I/O module to the card?
Thank you.

I always have many tabs open in FF, and rely on it restoring them each time I close/open it again. Sometimes I'll have a second window open and will close the main window first, losing a record of tabs I had open. Is there a way around this?

Seems like when FF restores a session, it restores the session of the last window open. If you use tabs as a way of keeping a list of things to do or look at, you have to be careful if you have a second window open to close the second window before your main one, or you will lose your list. I'm absent minded though and do this all the time. The only way to prevent this is bookmark all my tabs once a day, but I tend to forget to do even that. Any workaround for this?

When you re-open Firefox and choose Restore Session, by default it picks up your most-recently-open window, and the other windows should then show up in Recently Closed Windows.
The Firefox add-on Session Manager lets you manage how many closed windows and closed tabs are saved, in case it's not enough.

How to call sub VI and close the main VI in while loop and sequence condition

Hiya,
I have a problem with the while loop and the sequential condition in placed together i.e while loop as Global and sequential condition as local (i.e inside the Global loop). For example,when calling the sub vi from the main vi (main vi as main menu and sub vi as sub menu.)My problem is I can't run my sub menu when the particular icon is pressed through the main menu and only the front panel appears. My concerned was if possible the sub menu is activated in few second then jump back to the main menu again (analyze through the diagram).So, I don't know what should I need to do. If possible, please advice me how to encountered that particular problem.
Thanks!

Go to your block diagram of your main menu, then click on the "Hightlight Execution" it is something like a bulb. then you execute your vi. then LV will show you all your data flow.
When you feel sad, laugh

I can't get the Facebook page to close. the main screen is blocked by the Facebook page so i can't enter the passcode

I cant unblock a Facebook page which covers the main screen and therefore cannot enter the passcode on my iPad air.

How can I close Facebook?

JRE doesn't find the main class inside a JAR archive file

Hello everybody,
I've written a small application in Java, using NetBeans. Running my application inside NetBeans works fine, but I can't run it from the console or by double clicking the jar file.
Running it from the console I get the following error message:
java -jar TestApplication.jar
Exception in thread "main" java.lang.NoClassDefFoundError: tst.Benchmark
   at gnu.java.lang.MainThread.run(libgcj.so.81)
Caused by: java.lang.ClassNotFoundException: tst.Benchmark not found in gnu.gcj.runtime.SystemClassLoader{urls=[file:TestApplication.jar], parent=gnu.gcj.runtime.ExtensionClassLoader{urls=[], parent=null}}
   at java.net.URLClassLoader.findClass(libgcj.so.81)
   at gnu.gcj.runtime.SystemClassLoader.findClass(libgcj.so.81)
   at java.lang.ClassLoader.loadClass(libgcj.so.81)
   at java.lang.ClassLoader.loadClass(libgcj.so.81)
   at gnu.java.lang.MainThread.run(libgcj.so.81)I know that these errors often come when the class path is not set in the right way, and using a single java file, you can fix this by passing the parameter "-cp ."
I tried this with the jar file but it does not work and using "-cp TestApplication.jar tst/Benchmark" didn't work either.
Inside the jar file I have the META-INF Folder and a "tst" Folder which contains all my class files. And I've set tst.Benchmark as the main class, this also stands in the manifest file correctly.
Do you have any ideas what could be wrong?
Greetings JavanianGuy

This line
at gnu.java.lang.MainThread.run(libgcj.so.81)says that you're using GNU's Java, not Sun's Java. They are not the same. GNU Java is incomplete.
You'll need to ask this question at the GNU Java site.
Recommendation: Use Sun's Java

[Jar Executable] Could not find the main class. Progam will exit.

Hello,
I am a French person. Excuse me for my English who is not perfect.
I seek to create an achievable "jar". I followed the instructions given in the url http://java.developpez.com/faq/java/?page=execution#creationJar, and on the site of Sun.
I have today only one class which I posed in a specific repertory "Class".
Appli
|__Class
|__Src
|__META-INFThe contents of my "Manifest" is stored in repertory META-INF with the name "Commission2007.MF" and its contents are as follows:
Manifest-Version: 1.0
Created-By: 1.5.0 (Sun Microsystems Inc.)
Main-Class: Commission2007
.I've left the space line at the end of the file.
Here the result of execution of my order "jar":
C:\#Java Dev\2007_Commissionnements>jar cvfm Commission2007.jar META-INF/Commission2007.MF -C Class/ .
manifest ajout�
ajout : Class/./(entr�e = 0) (sortie = 0)(0% stock�)
ajout : Class/./Commission2007.class(entr�e = 9060) (sortie = 4547)(49% compress�s)I controlled the assignment of the extension "jar" in "Working station = > Tools = > Files Option = > Files Type = > .jar Selection = > Advance =
Open = > Change = >" C:\Program Files\Java\jre1.6.0\bin\javaw.exe "- gravel bank" %1 "% *". Thus not of problem on this side there!When I double click on the file "jar" lately created, I have the error message according to: "Could not find the main class. Progam will exit. " I do not understand the reason of this error. I consulted all the subjects on the treating Net of this subject but without result. I thus call upon you.
Perhaps that the cause is in my code which however functions perfectly when I carry out it with the order: "Commission2007 java". The class "hand" is quite present to see the code below. You can find the totality of my code on the bond http://www.developpez.net/forums/showpost.php?p=1870361&postcount=74
import �
public class Commission2007 extends Frame implements ActionListener, WindowListener
     �
     // Construction de la class EdText
     // D�finition et affichage de la bo�te de dialogue
     Commission2007()
     �
     // D�finition d'une frame pour l'application et affichage de la
     // bo�te de dialogue
     public static void main(String args[])
          Commission2007 editer = new Commission2007();
          editer.show();
          editer.addWindowListener(editer);
}I thank you in advance for your assistance.
Cordially, Gilles.

Salut,
It has been my experience that it is never a good idea to name your .MF file anything else other than MANIFEST.MF.
Try naming your .MF file MANIFEST.MF and rebuild your JAR.
Bon chance.

How do I get my executable to not start the main part of my program until I hit a start button?

I am assuming that the best way to do this is to make my current program, the one I want to convert to an executable, a sub vi, and create a new program that places the vi in some kind of loop started by a start button or something. But isn't that just going to start immediately when I convert it into an executable? As well, if that is the way I should do it, how do I get the sub vi's front panel to show up on the fron screen when it is initialized?

Good advice Dennis,
How about simply leaving the program "as-is", but simply wiring a while loop at the very beginning of the vi, that waits until you press "GO" or "Start", which triggers the end of the loop and goes to your existing program. Same as Dennis suggested, except you only have the "start" boolean inside the initial while loop.
Makes it a little cleaner.
Ray

Builded executable doesn't close the main VI front panel

Similar Messages

Maybe you are looking for