Building a budget desktop PC for CS5 (under $1,700)

After reading most of the posts here and elsewhere about building a PC to run Premiere CS5 I decided to take a stab at assembling the components to build my own (keep in mind I have never done this before). Below are the items in my Newegg shopping cart followed by an explanation about why I chose them. Please note the prices are valid as of 8/19/10 and the ones with a * are the prices after rebate so the actual prices may be higher when you read this. I welcome any comments and suggestions:
MOBO: Asus P6X58D-E LGA 1366 - $229.99
I looked at the Gigabyte Mobo but some of the bad reviews really concerned me. The Asus seems to get much better feedback and is only $20 more.
Processor: Intel Core i7-930 2.8GHz 4x256KN L2 Cache 8MB L3 Cache LGA 1366 130W - $289.99
This was the easiest item to choose since everyone seems to like it.
Ram: G.Skill PI 6GB (3 x 2GB) 240-Pin DDR3 SDRAM 1600 - $199.99 - But I'm ordering two (12GB total) for $399.98
I have never heard of G.Skill memory but it seems to be the most popular and highest rated at Newegg.
PSU: Corsair CMPSU-750TX 750W - $89.99 *
Corsair seems to be highly rated although not perfect... several customers reported problems or DOA units. I guess there is no PSU maker that you can really count on.
Case: AZZA Solano 1000 ATX Full Tower - $59.99 *
My alternate choice is the Antec 1200 for $159.99 but the Azza gets very good ratings so with that price difference I am leaning towards trying it. By the way, I was hoping to get a mid-tower case but have concerns about my graphics card fitting so I guess I'll go with the full tower. Like Harm said elsewhere "bigger is better".
Video card: MSI N465GTX - $234.99 *
This was a tough decision because everyone here seems to recommend the GTX 470, yet the 465 is about $100 cheaper. I'm really wondering if I'll see a HUGE difference in performance between the 465 and 470. I may still go with the 470 if I can find one under $300. By the way, this MSI model has dual fans which I read elsewhere is better than the single fans found on most cards. Not sure if it really matters with all the fans included in the case I am getting. If it doesn't, maybe I should get a GTX 470 with one on-board fan?
System Drive: WD Caviar Black 640GB 7200RPM 32MB Cache - $74.99
I read how others recommend a smaller drive with 10K RPM but I may use this PC for other things besides video editing so I think I want the larger drive.
Video storage drive (internal): WD Caviar Black 1TB 7200RPM 32MB Cache - $94.99
DVD/CD Drive: LG 22x DVD OEM - $24.99
I don't have any plans to do Blu-ray anytime soon.
Wireless Net Card: EDIMAX EW-7128G - $19.99
Windows 7 Home Premium 64-bit OEM - $99.99
I haven't been able to see how the higher end versions of Win 7 improve Premiere performance.
TOTAL: $1,619.88
(I already own a monitor, keyboard, mouse and Premiere CS5. I'm also not including liquid cooling until the system is up and running and I see if I really need it.)
I had hoped to stay under $1,500 but I don't see how that is possible.
What do you think? I won't pull the trigger on this system until the end of August so feel free to offer comments and suggestions. This will be my first ever PC build and I'm kind of nervous about it but also excited about getting a system that will be a high performer for many years to come. Now I have to find some good websites that teach how to put all this stuff together!
Thanks!

The following table specifies the limits on physical memory for Windows 7.
Version
Limit in 32-bit Windows
Limit in 64-bit Windows
Windows 7 Ultimate
4 GB
192 GB
Windows 7 Enterprise
4 GB
192 GB
Windows 7 Professional
4 GB
192 GB
Windows 7 Home Premium
4 GB
16 GB
Windows 7 Home Basic
4 GB
8 GB
Windows 7 Starter
2 GB
2 GB
465GTX
GPU Engine Specs:
CUDA Cores
352
Graphics Clock (MHz)
607 MHz
Processor Clock (MHz)
1215 MHz
Texture Fill Rate (billion/sec)
26.7
Memory Specs:
Memory Clock (MHz)
1603
Standard Memory Config
1024 MB GDDR5
Memory Interface Width
256-bit
Memory Bandwidth (GB/sec)
102.6
470GTX
GPU Engine Specs:
CUDA Cores
448
Graphics Clock (MHz)
607 MHz
Processor Clock (MHz)
1215 MHz
Texture Fill Rate (billion/sec)
34.0
Memory Specs:
Memory Clock (MHz)
1674
Standard Memory Config
1280 MB GDDR5
Memory Interface Width
320-bit
Memory Bandwidth (GB/sec)
133.9
Notice the Cores and Memory Bandwidth. That is why we recommend the 470GTX.
Eric
ADK

Similar Messages

Desktop spec for cs5

Hi Everyone
I'm really sorry to post this as your all probably sick to death of these but i really need your advice as you ladies n gents know whats required to get the best from this software and I'm new to this and don't want to spend cash I don't need to or spend my cash only to find I should have got a more powerful processor etc,
I need to know if the below spec will alow me to get the best out of cs5 with no or very little lag, also is the graphics card upto scratch? it is CUDA enabled but is it powerful enough? I have added 2 hard drives as I have heard it's prefferable to have the software seperate from all your other stuff?
I appreciate any advice
Processor
Intel Quad Core Processor i7-930 (2.80GHz) 4.8GTs/8MB Cache
Motherboard
ASUS P6T7 WS Supercomputer: supports CUDA technology
Memory
12GB TRI-DDR3 1333MHz (3 x 4GB)
Graphics Card
PNY QUADRO FX580 512MB GDDR3 CUDA enabled
Hardrive 1
150 GB
Hardrive 2
1 TB
Operating system
Windows 7 pro 64 Bit
22" HD Monitor
I have blueray drives ect in wish list but I think the main bits are listed above

Yes, there are risks involved in overclocking. The hardware that you have specified is more than up to the task, though.
This is not the forum to learn how to do that. All it really involves is making some BIOS settings changes and keeping the i7 processor temperature within spec while running extreme stress programs (LinX or Intel Burn Test) for an hour. Be sure to get a huge heatsink for your processor. All I can do is point you here, and you'll have to decide if that's something that you might want to learn how to do.
http://www.evga.com/forums/tt.aspx?forumid=4
Look in the top section for the threads that have the word "Overclock" in them.
The new generataion VelociRaptor drives (faster, less power than the older generation) come in 450 GB and 600 GB. Not sure why anyone would buy the 450 GB version, as the 600 GB is only $10 more....
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136555&cm_re=velociraptor_600gb-_ -22-136-555-_-Product

How do I create desktop shortcut for RogersYahooMail under Firefox?

When I right click on my rogers mail page, I don't get an option to create a desktop shortcut. I tried the methods suggested by Mozilla Support but couldn't get any of them to work.

See this KB page. <br />
https://support.mozilla.org/en-US/kb/create-desktop-shortcut-website

PC build for CS5 Production Premium

Hello everyone. Ron here from Toronto Canada.
I'm a serious hobbyist leaning more towards video and flash production, attempting to put together a PC for CS5 Production Premium.
I've gone through this forum recently (a few times, actually - great info - thanks guys) and have put together what I think I want, as I'm not a hardware techie.
I'm looking to see if I'm going on overkill, or if there are any finer details I may have missed in putting together these hardware components.
Ex: Motherboard fits in case; CPU Cooler doesn't block RAM slots; GPU good enough - SuperClocked worth the price; Overclocking issues; Good Blu-Ray burner; Hardware alternatives; etc...
Your thoughts and suggestions are most welcome.
PC-X2000F - LIAN-LI Black Aluminum ATX Super Full Tower Computer Case
CMPSU-1200AX - Corsair Professional Series Gold 1200W ATX Fully Modular 80PLUS Gold Power Supply
GA-X58A-UD9 - GIGABYTE LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 XL ATX Intel Motherboard
015-P3-1485-AR - EVGA 015-P3-1485-AR GeForce GTX 480 (Fermi) SuperClocked+ 1536MB 384-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
* Was going for the Quadro FX3800, but understand they're going EOL
F3-12800CL7T-12GBTDD - G.SKILL Trident+ Turbulence II 12GB (3 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model
BX80613I7980X - Intel Core i7 980X Extreme Edition Six-Core Socket LGA1366, 3.33Ghz, 6.4GT/s FSB, 12MB L3 Cache, 32nm (Retail Boxed)
NH-D14 - Noctua Six Heatpipe Dual Radiator CPU Cooler for Intel Socket LGA1366/1156/775 & AMD Socket AM2/AM2+/AM3
AS5-3.5G - Arctic Silver 5 (3.5g) High-Density Polysynthetic Silver Thermal Compound
WD2003FYYS - (2x) Western Digital RE4 2TB SATAII 7200RPM 64M Buffer - OEM
WD6000HLHX - Western Digital VelociRaptor 600GB SATA 6Gb/s 10000RPM 32MB OEM
LG WH10LS30K - LG 10X Blu-ray Burner - LightScribe Support - Bulk - OEM
GLC-00736 - Microsoft Windows 7 Ultimate 64-bit - OEM
Thanks again.

Thanks Harm. Phew!! What a relief.
My next step is to order my list through a local computer store rather than online, and have them build it for me for the cost of shipping and me trying to build it myself.
>> I wonder where you can find the F3 Trident 4 G sticks though. A great choice but hard to get I think. I have been looking at that memory as well to upgrade to 24 G.
I got the idea from: http://forums.adobe.com/message/2968126
Which led me to: http://www.newegg.ca/Product/Product.aspx?Item=N82E16820231381
This led me to another question. In the reviews section ( http://www.newegg.ca/Product/ProductReview.aspx?Item=N82E16820231359 ) there's mention of the price for the 6x4 sticks being a marketing trick, where its cheaper to buy 2x (3x4) sticks. Yet one reply to that, mentions the price difference is because the 6x4 sticks are all made to work together. I also read somewhere that its better to get the 6 pack because they're all manufactured on the same line. Any thoughts?
>> If anything critical, consider more disks and a separate hardware controller for the RE4's. Not absolutely necessary, but desirable.
I thought about this already from previous discussions. Thanks for mentioning it, however. Greatly appreciated. In my case, this will be a future consideration.
Thanks for the fast response, Harm.
And many thanks to the other contributors for your time and wealth of information.
Ron

I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use

@I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
Ram available = 1588 MB
Range = 873 -1143 MB
Recommended Photoshop usage range = 857 however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
The Photoshop I use is registered, I have product # and order # .

Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.

New PC Build for CS5 Master Suite

Hi,
I'm building a new PC to use with the CS5 Master Suite of programs (amongst others) and am looking for a little advice.
I've already read through lots of posts here and got some valuable advice, however there are so many different options available that I still have some questions. I hope you can help.
System will be used for web design, graphic design, photo editing and video (inc HD).
Here is the component list I've put together so far:
1. Motherboard
Asus P6X58D Premium Intel X58 (Socket 1366) DDR3
http://www.overclockers.co.uk/showproduct.php?prodid=MB-379-AS
£243.00
2. CPU
Intel Core i7 930 2.80GHz (Bloomfield) (Socket LGA1366)
http://www.overclockers.co.uk/showproduct.php?prodid=CP-318-IN&groupid=701&catid=6&subcat= 1272
£222.00
3. Memory
Corsair Dominator Tri Channel 6GB (3x2GB) PC3 - 12800 1600MHz DDR3
http://www.overclockers.co.uk/showproduct.php?prodid=MY-269-CS&groupid=701&catid=8&subcat= 1389
£190.00
4.System HD
Western Digital VelociRaptor 150GB 10000RPM SATA-II 16MB Cache
http://www.overclockers.co.uk/showproduct.php?prodid=HD-236-WD&groupid=701&catid=14&subcat =167
£135.00
5a.Storage HD's
Samsung SpinPoint F3 1TB SATA-II 32MB Cache - OEM
http://www.overclockers.co.uk/showproduct.php?prodid=HD-082-SA&groupid=701&catid=14&subcat =1279
£57.00
5b.OR
Western Digital Caviar Black 1TB SATA 6Gb/s 64MB Cache
http://www.overclockers.co.uk/showproduct.php?prodid=HD-336-WD&groupid=701&catid=14&subcat =1279
£77.00
6a. Quiet Case
Coolermaster Sileo 500 Silent Case - Black
http://www.overclockers.co.uk/showproduct.php?prodid=CA-164-CM
£63.00
6b. OR
Antec Solo Quiet Mini Tower Case
http://www.overclockers.co.uk/showproduct.php?prodid=CA-058-AN&tool=3
£73.00
6c. OR
Antec Sonata III Piano Black Quiet Case
http://www.overclockers.co.uk/showproduct.php?prodid=CA-073-AN&tool=3
£105.00
7a. CPU Fan/Cooling
Noctua NH-D14 Dual Radiator CPU Cooler
http://www.overclockers.co.uk/showproduct.php?prodid=HS-011-NC
£67.00
7b. OR
Corsair H50 CPU Watercooling
http://www.overclockers.co.uk/showproduct.php?prodid=WC-002-CS
£67.00
8a. Graphics Card
Asus NVIDIA GeForce GTX 480 1526MB
http://www.cclonline.com/product-info.asp?product_id=46710
£435.00
8b. OR
nVidia GeForce GTX 470 PCI-Expres VGA Card 1280MB
Eclipse Computers
£312.00
8c. OR
PNY Quadro FX 1800 768MB
£266.00
9a. Quiet Power Supply
Corsair HX 750W ATX Modular SLI Compliant Power Supply
http://www.overclockers.co.uk/showproduct.php?prodid=CA-018-CS&groupid=701&catid=123&subca t=1084
£130.00
9b. OR
Corsair HX 1000W ATX Modular SLI Compliant Power Supply
http://www.overclockers.co.uk/showproduct.php?prodid=CA-012-CS&groupid=701&catid=123&subca t=1084
£195.00
10. Windows 7 Pro 64Bit
Microsoft Windows 7 Professional 64-Bit - OEM
Overclockers
£120.00
1. Has been recommended on these forums. Good to have USB3.0.
2. CPU is affordable and fast, with the ability to overclock it if I feel the need for a bit more speed in the future.
3. Would love 12GB, but will start with 6GB and perhaps add more later.
4. Started looking at Solid State Drives as I love the comments about how fast they load programs, etc., however as they are still really expensive felt that going with a fast standard drive would be best. As I plan on having a dual boot system, I would get two of these. One would have OS, CS5 and all my other software installed and the other one would have the minimum for CS5 installed and the OS tweaked for performance with video editing.
5. Both seem like great drives. Anyone any preference? Would plan on getting two and use one to store video rushes and the other for previews and the page file. Would getting a HD with a 6GB/s interface be worth it?
6. I want a quiet case and one that's no higher than 45cm. I already own the Antec Solo and I like the elastic HD mounting. Anyone any preference?
7. Noctua comes recommended on these forums, however am concerned with it's size. Love the idea of water cooling an the H50 system make it easier and less fuss being a closed system. Final choice must be quiet and I've read differing reviews on both.
8. Can't wait to use the MPE, so want a decent card. Torn between getting a cheaper card and upgrading later or spending the money now on a GTX480 and doing the software hack until fully supported.
9. With a GTX480 would a 750w PSU be enough?
GRAPHICS CARD
I've read reports of the GTX480 not being faster than the 2XX version card, however am I not correct in saying that the 2XX cards are no longer being sold? Should I be looking for a card from a particular manufacturer, i.e. Asus, Gainward, Point of View, Gigabyte? Or even Nvidia themselves?
I am worried about the heat generated by the GTX480 and the associated fan noise to cool it. Any thoughts?
Love the water cooling solution, perhaps some day. http://www.guru3d.com/article/geforce-gtx-480-liquid-cooling-danger-den-review/1
HD SET-UP
C:
WD VelociRaptor 150GB
Main System
C:
WD VelociRaptor 150GB
Video System
D:
DVD Burner
E:
Samsung SpinPoint F3 1TB
Video rushes
F:
Samsung SpinPoint F3 1TB
Video previews / Page File
G:
1.5TB
Other storage
H:
1.5TB
Other storage
DUAL BOOT
For my dual boot, has anyone had experience of using a HD caddy like this one? http://www.ebuyer.com/product/172727
I read a review which said that there was no real speed difference as there is no interface card, just a cable to the motherboard. It would make my dual boot less complicated to set-up as I wouldn't need to use Win 7 to dual boot or use 3rd party software like Acronis OS Selector. It would also free up space for a further internal HD.
PREMIERE OUTPUT TO A HDMI SCREEN
I've been going back and forward on the best solution to get a proper output of my timeline in Premiere to an external monitor. I was set to go with the Matrox MX02 Mini, however some here have said they're unstable (to a degree). Although with the CS5 drivers not out yet, perhaps it's too early to say.
Although none of my video work has been for broadcast (so far), I see a great benefit from being able to preview my timeline on a TV screen as opposed to a PC monitor. I will be running two screens so I need both outputs from the graphics card.
I look forward to receiving your collective wisdom.

Here are the components I plan to buy this week:
Description
Inc VAT
1000W Corsair CMPSU-1000HXUK, ATX, EPS12V, PS/2, Modular Power Supply, UK Version, 5 Year Warranty
£184.11
300GB Western Digital WD3000HLFS VelociRaptor, SATA 3Gb/s, 10000rpm, 16MB Cache, 4.2 ms
£154.78
Coolermaster ATCS 840 Classic Full Tower Aluminum Case, Black w/o PSU
£143.31
1TB Samsung HD103SJ Spinpoint F3, SATA 3Gb/s, 7200rpm, 32MB Cache, 8.9 ms, NCQ, OEM
(2x) £96.30
Sony AD-5240S-0B 24x DVDR 12xDVDDL DVDRW x8/-RWx6 SATA Black
£14.99
12GB (6x2GB) Corsair Dominator, DDR3 PC3-12800 (1600), CAS 8-8-8-24, DHX, XMP, DF, 1.65V
£357.34
Microsoft Windows 7 Professional 64 Bit, Single, - OEM
£110.53
Intel Core i7 930 D0 SLBKP Bloomfield 45nm, 2.8 GHz, QPI 4.8GT/s, 8MB Cache, 20x Ratio, 130W, Retail
£236.37
1280MB Asus GTX 470, 40nm, 3348MHz GDDR5, GPU 607MHz, Shader 1215MHz, 448 Cores, 2xDVI,mini HDMI
£293.13
Asus P6X58D-E, Intel X58, S1366, PCI-E 2.0 (x16), DDR3 1333/1600/2000, SATA 3Gb/s RAID, ATX
£168.22
Noctua NH-D14 Dual Radiator CPU Cooler (Socket LGA1366/LGA1156/LGA775/AM2/AM2)
£66.99
Noctua NF-P12 Vortex-Control 120mm Quiet Case Fan - 3 Pin
£17.61
Noctua NF-S12B ULN Ultra Low Noise 120mm Cooling Fan, 500/700 RPM
£16.99
Plus a couple of PSU to motherboard extension cables and Windows 7 Pro. It was mentioned by someone that the CPU thermal paste you get with the HN-D14 is fine, so no need to buy anything else.
One extra fan (NF-S12B) to cool hard drives and the other for somewhere else in the case. Perhaps I don't need these.
I presume that I should try and get an OEM CPU as I'll not need the heatsink and fan that'll be in the retail version?
I'm just waiting for Scan to get the case back in stock. Should be today. All priced at Scan, except last three items which are from Overclockers.
Anyone any final thoughts or tips?

Adobe Extension Manager CS5 is not showing Photoshop CS5 under products. I am using a mac trying to install a plug in for Kubota auto album.

I have a Mac, using chrome, and trying to install Kevin Kubota Auto album into Photoshop. Talked with Kevin Kubota support and they said they can't help me anymore because my Adobe Extension Manager was reinstalled and will not display Photoshop CS5 under products. Please help !!!!

EXACT and complete info, please.
BOILERPLATE TEXT:
Note that because this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Build error on using environment variable for CS5 on Mac

I have created a sample project using dollyx on Mac for CS5 . I have used an environment variable and defined it in Source tree of XCode preferences.
I am using snow leapard and my XCode version is 3.2.2 .
I have defined variable as IDSDK7 for /idsdk7 (which is my SDK directory). I am creating project outside SDK . While creating project with DollyX , I am giving SDK's path as $(IDSDK7) which is absolute path and not relative with respect to the project .
I am getting many build errors -----
/idsdk7/external/afl/includes/AErrors.h:31:0 /idsdk7/external/afl/includes/AErrors.h:31:19: error: Files.h: No such file or directory
/idsdk7/source/public/includes/K2Debugging.h:53:0 /idsdk7/source/public/includes/K2Debugging.h:53:3: error: #error DEBUG and NDEBUG are out of sync!
/idsdk7/source/public/includes/UnicodeSavvyString.h:35:0 /idsdk7/source/public/includes/UnicodeSavvyString.h:35:26: error: adobe/move.hpp: No such file or directory
/idsdk7/source/public/includes/PMString.h:34:0 /idsdk7/source/public/includes/PMString.h:34:30: error: adobe/typeinfo.hpp: No such file or directory
/idsdk7/source/public/includes/UnicodeSavvyString.h:211:0 /idsdk7/source/public/includes/UnicodeSavvyString.h:211: error: expected `)' before '<' token
/idsdk7/source/public/includes/PMString.h:120:0 /idsdk7/source/public/includes/PMString.h:120: error: expected `)' before '<' token
/idsdk7/source/public/includes/PMString.h:1196:0 /idsdk7/source/public/includes/PMString.h:1196: error: expected constructor, destructor, or type conversion before '(' token
/idsdk7/source/public/includes/WideString.h:322:0 /idsdk7/source/public/includes/WideString.h:322: error: expected `)' before '<' token
/idsdk7/source/public/includes/WideString.h:751:0 /idsdk7/source/public/includes/WideString.h:751: error: expected constructor, destructor, or type conversion before '(' token
/idsdk7/source/public/includes/IDFile.h:385:0 /idsdk7/source/public/includes/IDFile.h:385: error: expected constructor, destructor, or type conversion before '(' token
/idsdk7/source/public/interfaces/architecture/IDataBase.h:488:0 /idsdk7/source/public/interfaces/architecture/IDataBase.h:488: warning: 'IDataBase::<anonymous struct>' declared with greater visibility than the type of its field 'IDataBase::<anonymous struct>::mainFile'
/idsdk7/source/public/interfaces/architecture/IDataBase.h:488:0 /idsdk7/source/public/interfaces/architecture/IDataBase.h:488: warning: 'IDataBase::<anonymous struct>' declared with greater visibility than the type of its field 'IDataBase::<anonymous struct>::miniSaveFile'
/idsdk7/source/public/interfaces/architecture/IDataBase.h:779:0 /idsdk7/source/public/interfaces/architecture/IDataBase.h:779: error: expected constructor, destructor, or type conversion before '(' token
/idsdk7/source/public/includes/InterfacePtr.h:506:0 /idsdk7/source/public/includes/InterfacePtr.h:506: error: expected constructor, destructor, or type conversion before '(' token
/idsdk7/source/public/includes/K2Vector.h:241:0 /idsdk7/source/public/includes/K2Vector.h:241: error: expected constructor, destructor, or type conversion before '(' token
/idsdk7/source/public/includes/MSystemUtils.h:382:0 /idsdk7/source/public/includes/MSystemUtils.h:382: warning: 'InvertRgn' is deprecated (declared at /System/Library/Frameworks/ApplicationServices.framework/Frameworks/QD.framework/Headers/ QuickdrawAPI.h:1831)
/idsdk7/source/public/includes/MSystemUtils.h:382:0 /idsdk7/source/public/includes/MSystemUtils.h:382: warning: 'InvertRgn' is deprecated (declared at /System/Library/Frameworks/ApplicationServices.framework/Frameworks/QD.framework/Headers/ QuickdrawAPI.h:1831)
/idsdk7/source/public/includes/MSystemUtils.h:618:0 /idsdk7/source/public/includes/MSystemUtils.h:618: warning: 'SysBeep' is deprecated (declared at /System/Library/Frameworks/Carbon.framework/Frameworks/CarbonSound.framework/Headers/Soun d.h:1383)
/idsdk7/source/public/includes/MSystemUtils.h:618:0 /idsdk7/source/public/includes/MSystemUtils.h:618: warning: 'SysBeep' is deprecated (declared at /System/Library/Frameworks/Carbon.framework/Frameworks/CarbonSound.framework/Headers/Soun d.h:1383)
/CS5Test/Prj/../Source/CTActionComponent.cpp:0:0 /CS5Test/Prj/../Source/CTActionComponent.cpp: At global scope:
/CS5Test/Prj/../Source/CTActionComponent.cpp:43:0 /CS5Test/Prj/../Source/CTActionComponent.cpp:43: warning: 'CTActionComponent' declared with greater visibility than the type of its field 'CTActionComponent::<anonymous>'
/CS5Test/Prj/../Source/CTActionComponent.cpp:43:0 /CS5Test/Prj/../Source/CTActionComponent.cpp:43: warning: 'CTActionComponent' declared with greater visibility than its base 'CActionComponent'
CompileC build/CS5Test.build/Default/Debug.build/Objects-normal/i386/CTNoStrip.o ../Source/CTNoStrip.cpp normal i386 c++ com.apple.compilers.gcc.4_2
cd /CS5Test/Prj
setenv LANG en_US.US-ASCII
/Developer/usr/bin/gcc-4.2 -x c++ -arch i386 -fmessage-length=0 -pipe -Wno-trigraphs -fpascal-strings -fasm-blocks -Os -Werror -DMACINTOSH -DMACOSX_SDKVERSION= -fvisibility-inlines-hidden -gdwarf-2 -I/CS5Test/Prj/build/CS5Test.build/Default/Debug.build/CS5Test.hmap -F/CS5Test/Prj/../debug/sdk -F/idsdk7/build/mac/debug/packagefolder/contents/macos -F/idsdk7/build/mac/debug/packagefolder/contents/Frameworks -I/CS5Test/Prj/../debug/sdk/include -I/idsdk7/external/afl/includes -I/idsdk7/source/precomp/msvc -I/idsdk7/source/public/interfaces/xmedia -I/idsdk7/source/public/interfaces/preflight -I/idsdk7/source/public/interfaces/ui -I/idsdk7/source/public/interfaces/tables -I/idsdk7/source/public/interfaces/text -I/idsdk7/source/public/interfaces/graphics -I/idsdk7/source/public/libs/widgetbin/includes -I/idsdk7/source/public/interfaces/workgroup -I/idsdk7/source/public/interfaces/interactive -I/idsdk7/source/public/interfaces/interactive/ui -I/idsdk7/source/public/interfaces/colormgmt -I/idsdk7/source/public/interfaces/utils -I/idsdk7/source/public/interfaces/incopy -I/idsdk7/source/public/interfaces/layout -I/idsdk7/source/public/interfaces/architecture -I/idsdk7/source/public/interfaces/cjk -I/idsdk7/source/precomp/common -I/idsdk7/source/public/includes -I/idsdk7/source/public/libs/publiclib/plugins -I/idsdk7/source/public/libs/publiclib/files -I/idsdk7/source/public/libs/publiclib/objectmodel -I/idsdk7/external/asl/boost_libraries -I/idsdk7/source/sdksamples/common -I/idsdk7/external/afl/includes -I../Source -I/CS5Test/Prj/build/CS5Test.build/Default/Debug.build/DerivedSources/i386 -I/CS5Test/Prj/build/CS5Test.build/Default/Debug.build/DerivedSources -include /idsdk7/source/precomp/gcc/PluginPrefix.pch -c /CS5Test/Prj/../Source/CTNoStrip.cpp -o /CS5Test/Prj/build/CS5Test.build/Default/Debug.build/Objects-normal/i386/CTNoStrip.o
In file included from /idsdk7/external/afl/includes/AFile.h:30,
                 from /idsdk7/source/public/includes/IDFile.h:34,
                 from /idsdk7/source/public/interfaces/architecture/IDataBase.h:37,
                 from /idsdk7/source/public/includes/InterfacePtr.h:76,
                 from /idsdk7/source/precomp/common/ShukHeaders.cp:48,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/external/afl/includes/AErrors.h:31:19: error: Files.h: No such file or directory
In file included from /idsdk7/source/public/includes/PMString.h:28,
                 from /idsdk7/source/public/includes/IDFile.h:36,
                 from /idsdk7/source/public/interfaces/architecture/IDataBase.h:37,
                 from /idsdk7/source/public/includes/InterfacePtr.h:76,
                 from /idsdk7/source/precomp/common/ShukHeaders.cp:48,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/includes/K2Debugging.h:53:3: error: #error DEBUG and NDEBUG are out of sync!
In file included from /idsdk7/source/public/includes/PMString.h:31,
                 from /idsdk7/source/public/includes/IDFile.h:36,
                 from /idsdk7/source/public/interfaces/architecture/IDataBase.h:37,
                 from /idsdk7/source/public/includes/InterfacePtr.h:76,
                 from /idsdk7/source/precomp/common/ShukHeaders.cp:48,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/includes/UnicodeSavvyString.h:35:26: error: adobe/move.hpp: No such file or directory
In file included from /idsdk7/source/public/includes/IDFile.h:36,
                 from /idsdk7/source/public/interfaces/architecture/IDataBase.h:37,
                 from /idsdk7/source/public/includes/InterfacePtr.h:76,
                 from /idsdk7/source/precomp/common/ShukHeaders.cp:48,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/includes/PMString.h:34:30: error: adobe/typeinfo.hpp: No such file or directory
In file included from /idsdk7/source/public/includes/PMString.h:31,
                 from /idsdk7/source/public/includes/IDFile.h:36,
                 from /idsdk7/source/public/interfaces/architecture/IDataBase.h:37,
                 from /idsdk7/source/public/includes/InterfacePtr.h:76,
                 from /idsdk7/source/precomp/common/ShukHeaders.cp:48,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/includes/UnicodeSavvyString.h:211: error: expected `)' before '<' token
In file included from /idsdk7/source/public/includes/IDFile.h:36,
                 from /idsdk7/source/public/interfaces/architecture/IDataBase.h:37,
                 from /idsdk7/source/public/includes/InterfacePtr.h:76,
                 from /idsdk7/source/precomp/common/ShukHeaders.cp:48,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/includes/PMString.h:120: error: expected `)' before '<' token
/idsdk7/source/public/includes/PMString.h:1196: error: expected constructor, destructor, or type conversion before '(' token
In file included from /idsdk7/source/public/includes/IDFile.h:37,
                 from /idsdk7/source/public/interfaces/architecture/IDataBase.h:37,
                 from /idsdk7/source/public/includes/InterfacePtr.h:76,
                 from /idsdk7/source/precomp/common/ShukHeaders.cp:48,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/includes/WideString.h:322: error: expected `)' before '<' token
/idsdk7/source/public/includes/WideString.h:751: error: expected constructor, destructor, or type conversion before '(' token
In file included from /idsdk7/source/public/interfaces/architecture/IDataBase.h:37,
                 from /idsdk7/source/public/includes/InterfacePtr.h:76,
                 from /idsdk7/source/precomp/common/ShukHeaders.cp:48,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/includes/IDFile.h:385: error: expected constructor, destructor, or type conversion before '(' token
cc1plus: warnings being treated as errors
In file included from /idsdk7/source/public/includes/InterfacePtr.h:76,
                 from /idsdk7/source/precomp/common/ShukHeaders.cp:48,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/interfaces/architecture/IDataBase.h:488: warning: 'IDataBase::<anonymous struct>' declared with greater visibility than the type of its field 'IDataBase::<anonymous struct>::mainFile'
/idsdk7/source/public/interfaces/architecture/IDataBase.h:488: warning: 'IDataBase::<anonymous struct>' declared with greater visibility than the type of its field 'IDataBase::<anonymous struct>::miniSaveFile'
/idsdk7/source/public/interfaces/architecture/IDataBase.h:779: error: expected constructor, destructor, or type conversion before '(' token
In file included from /idsdk7/source/precomp/common/ShukHeaders.cp:48,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/includes/InterfacePtr.h:506: error: expected constructor, destructor, or type conversion before '(' token
In file included from /idsdk7/source/precomp/common/ShukHeaders.cp:51,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/includes/K2Vector.h:241: error: expected constructor, destructor, or type conversion before '(' token
In file included from /idsdk7/source/public/includes/SystemUtils.h:33,
                 from /idsdk7/source/public/includes/PMPoint.h:29,
                 from /idsdk7/source/public/includes/PMMatrix.h:33,
                 from /idsdk7/source/precomp/common/ShukHeaders.cp:53,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/includes/MSystemUtils.h: In function 'void InvertSysRgn(OpaqueGrafPtr*, const __HIShape*)':
/idsdk7/source/public/includes/MSystemUtils.h:382: warning: 'InvertRgn' is deprecated (declared at /System/Library/Frameworks/ApplicationServices.framework/Frameworks/QD.framework/Headers/ QuickdrawAPI.h:1831)
/idsdk7/source/public/includes/MSystemUtils.h:382: warning: 'InvertRgn' is deprecated (declared at /System/Library/Frameworks/ApplicationServices.framework/Frameworks/QD.framework/Headers/ QuickdrawAPI.h:1831)
/idsdk7/source/public/includes/MSystemUtils.h: In function 'void SystemBeep()':
/idsdk7/source/public/includes/MSystemUtils.h:618: warning: 'SysBeep' is deprecated (declared at /System/Library/Frameworks/Carbon.framework/Frameworks/CarbonSound.framework/Headers/Soun d.h:1383)
/idsdk7/source/public/includes/MSystemUtils.h:618: warning: 'SysBeep' is deprecated (declared at /System/Library/Frameworks/Carbon.framework/Frameworks/CarbonSound.framework/Headers/Soun d.h:1383)
CompileC build/CS5Test.build/Default/Debug.build/Objects-normal/i386/CTID.o ../Source/CTID.cpp normal i386 c++ com.apple.compilers.gcc.4_2
cd /CS5Test/Prj
setenv LANG en_US.US-ASCII
/Developer/usr/bin/gcc-4.2 -x c++ -arch i386 -fmessage-length=0 -pipe -Wno-trigraphs -fpascal-strings -fasm-blocks -Os -Werror -DMACINTOSH -DMACOSX_SDKVERSION= -fvisibility-inlines-hidden -gdwarf-2 -I/CS5Test/Prj/build/CS5Test.build/Default/Debug.build/CS5Test.hmap -F/CS5Test/Prj/../debug/sdk -F/idsdk7/build/mac/debug/packagefolder/contents/macos -F/idsdk7/build/mac/debug/packagefolder/contents/Frameworks -I/CS5Test/Prj/../debug/sdk/include -I/idsdk7/external/afl/includes -I/idsdk7/source/precomp/msvc -I/idsdk7/source/public/interfaces/xmedia -I/idsdk7/source/public/interfaces/preflight -I/idsdk7/source/public/interfaces/ui -I/idsdk7/source/public/interfaces/tables -I/idsdk7/source/public/interfaces/text -I/idsdk7/source/public/interfaces/graphics -I/idsdk7/source/public/libs/widgetbin/includes -I/idsdk7/source/public/interfaces/workgroup -I/idsdk7/source/public/interfaces/interactive -I/idsdk7/source/public/interfaces/interactive/ui -I/idsdk7/source/public/interfaces/colormgmt -I/idsdk7/source/public/interfaces/utils -I/idsdk7/source/public/interfaces/incopy -I/idsdk7/source/public/interfaces/layout -I/idsdk7/source/public/interfaces/architecture -I/idsdk7/source/public/interfaces/cjk -I/idsdk7/source/precomp/common -I/idsdk7/source/public/includes -I/idsdk7/source/public/libs/publiclib/plugins -I/idsdk7/source/public/libs/publiclib/files -I/idsdk7/source/public/libs/publiclib/objectmodel -I/idsdk7/external/asl/boost_libraries -I/idsdk7/source/sdksamples/common -I/idsdk7/external/afl/includes -I../Source -I/CS5Test/Prj/build/CS5Test.build/Default/Debug.build/DerivedSources/i386 -I/CS5Test/Prj/build/CS5Test.build/Default/Debug.build/DerivedSources -include /idsdk7/source/precomp/gcc/PluginPrefix.pch -c /CS5Test/Prj/../Source/CTID.cpp -o /CS5Test/Prj/build/CS5Test.build/Default/Debug.build/Objects-normal/i386/CTID.o
In file included from /idsdk7/external/afl/includes/AFile.h:30,
                 from /idsdk7/source/public/includes/IDFile.h:34,
                 from /idsdk7/source/public/interfaces/architecture/IDataBase.h:37,
                 from /idsdk7/source/public/includes/InterfacePtr.h:76,
                 from /idsdk7/source/precomp/common/ShukHeaders.cp:48,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/external/afl/includes/AErrors.h:31:19: error: Files.h: No such file or directory
In file included from /idsdk7/source/public/includes/PMString.h:28,
                 from /idsdk7/source/public/includes/IDFile.h:36,
                 from /idsdk7/source/public/interfaces/architecture/IDataBase.h:37,
                 from /idsdk7/source/public/includes/InterfacePtr.h:76,
                 from /idsdk7/source/precomp/common/ShukHeaders.cp:48,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/includes/K2Debugging.h:53:3: error: #error DEBUG and NDEBUG are out of sync!
In file included from /idsdk7/source/public/includes/PMString.h:31,
                 from /idsdk7/source/public/includes/IDFile.h:36,
                 from /idsdk7/source/public/interfaces/architecture/IDataBase.h:37,
                 from /idsdk7/source/public/includes/InterfacePtr.h:76,
                 from /idsdk7/source/precomp/common/ShukHeaders.cp:48,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/includes/UnicodeSavvyString.h:35:26: error: adobe/move.hpp: No such file or directory
In file included from /idsdk7/source/public/includes/IDFile.h:36,
                 from /idsdk7/source/public/interfaces/architecture/IDataBase.h:37,
                 from /idsdk7/source/public/includes/InterfacePtr.h:76,
                 from /idsdk7/source/precomp/common/ShukHeaders.cp:48,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/includes/PMString.h:34:30: error: adobe/typeinfo.hpp: No such file or directory
In file included from /idsdk7/source/public/includes/PMString.h:31,
                 from /idsdk7/source/public/includes/IDFile.h:36,
                 from /idsdk7/source/public/interfaces/architecture/IDataBase.h:37,
                 from /idsdk7/source/public/includes/InterfacePtr.h:76,
                 from /idsdk7/source/precomp/common/ShukHeaders.cp:48,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/includes/UnicodeSavvyString.h:211: error: expected `)' before '<' token
In file included from /idsdk7/source/public/includes/IDFile.h:36,
                 from /idsdk7/source/public/interfaces/architecture/IDataBase.h:37,
                 from /idsdk7/source/public/includes/InterfacePtr.h:76,
                 from /idsdk7/source/precomp/common/ShukHeaders.cp:48,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/includes/PMString.h:120: error: expected `)' before '<' token
/idsdk7/source/public/includes/PMString.h:1196: error: expected constructor, destructor, or type conversion before '(' token
In file included from /idsdk7/source/public/includes/IDFile.h:37,
                 from /idsdk7/source/public/interfaces/architecture/IDataBase.h:37,
                 from /idsdk7/source/public/includes/InterfacePtr.h:76,
                 from /idsdk7/source/precomp/common/ShukHeaders.cp:48,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/includes/WideString.h:322: error: expected `)' before '<' token
/idsdk7/source/public/includes/WideString.h:751: error: expected constructor, destructor, or type conversion before '(' token
In file included from /idsdk7/source/public/interfaces/architecture/IDataBase.h:37,
                 from /idsdk7/source/public/includes/InterfacePtr.h:76,
                 from /idsdk7/source/precomp/common/ShukHeaders.cp:48,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/includes/IDFile.h:385: error: expected constructor, destructor, or type conversion before '(' token
cc1plus: warnings being treated as errors
In file included from /idsdk7/source/public/includes/InterfacePtr.h:76,
                 from /idsdk7/source/precomp/common/ShukHeaders.cp:48,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/interfaces/architecture/IDataBase.h:488: warning: 'IDataBase::<anonymous struct>' declared with greater visibility than the type of its field 'IDataBase::<anonymous struct>::mainFile'
/idsdk7/source/public/interfaces/architecture/IDataBase.h:488: warning: 'IDataBase::<anonymous struct>' declared with greater visibility than the type of its field 'IDataBase::<anonymous struct>::miniSaveFile'
/idsdk7/source/public/interfaces/architecture/IDataBase.h:779: error: expected constructor, destructor, or type conversion before '(' token
In file included from /idsdk7/source/precomp/common/ShukHeaders.cp:48,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/includes/InterfacePtr.h:506: error: expected constructor, destructor, or type conversion before '(' token
In file included from /idsdk7/source/precomp/common/ShukHeaders.cp:51,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/includes/K2Vector.h:241: error: expected constructor, destructor, or type conversion before '(' token
In file included from /idsdk7/source/public/includes/SystemUtils.h:33,
                 from /idsdk7/source/public/includes/PMPoint.h:29,
                 from /idsdk7/source/public/includes/PMMatrix.h:33,
                 from /idsdk7/source/precomp/common/ShukHeaders.cp:53,
                 from /idsdk7/source/precomp/gcc/PluginPrefix.pch:30,
                 from <command-line>:0:
/idsdk7/source/public/includes/MSystemUtils.h: In function 'void InvertSysRgn(OpaqueGrafPtr*, const __HIShape*)':
/idsdk7/source/public/includes/MSystemUtils.h:382: warning: 'InvertRgn' is deprecated (declared at /System/Library/Frameworks/ApplicationServices.framework/Frameworks/QD.framework/Headers/ QuickdrawAPI.h:1831)
/idsdk7/source/public/includes/MSystemUtils.h:382: warning: 'InvertRgn' is deprecated (declared at /System/Library/Frameworks/ApplicationServices.framework/Frameworks/QD.framework/Headers/ QuickdrawAPI.h:1831)
/idsdk7/source/public/includes/MSystemUtils.h: In function 'void SystemBeep()':
/idsdk7/source/public/includes/MSystemUtils.h:618: warning: 'SysBeep' is deprecated (declared at /System/Library/Frameworks/Carbon.framework/Frameworks/CarbonSound.framework/Headers/Soun d.h:1383)
/idsdk7/source/public/includes/MSystemUtils.h:618: warning: 'SysBeep' is deprecated (declared at /System/Library/Frameworks/Carbon.framework/Frameworks/CarbonSound.framework/Headers/Soun d.h:1383)
CompileC build/CS5Test.build/Default/Debug.build/Objects-normal/i386/SDKPlugInEntrypoint.o /idsdk7/source/sdksamples/common/SDKPlugInEntrypoint.cpp normal i386 c++ com.apple.compilers.gcc.4_2
cd /CS5Test/Prj
setenv LANG en_US.US-ASCII
/Developer/usr/bin/gcc-4.2 -x c++ -arch i386 -fmessage-length=0 -pipe -Wno-trigraphs -fpascal-strings -fasm-blocks -Os -Werror -DMACINTOSH -DMACOSX_SDKVERSION= -fvisibility-inlines-hidden -gdwarf-2 -I/CS5Test/Prj/build/CS5Test.build/Default/Debug.build/CS5Test.hmap -F/CS5Test/Prj/../debug/sdk -F/idsdk7/build/mac/debug/packagefolder/contents/macos -F/idsdk7/build/mac/debug/packagefolder/contents/Frameworks -I/CS5Test/Prj/../debug/sdk/include -I/idsdk7/external/afl/includes -I/idsdk7/source/precomp/msvc -I/idsdk7/source/public/interfaces/xmedia -I/idsdk7/source/public/interfaces/preflight -I/idsdk7/source/public/interfaces/ui -I/idsdk7/source/public/interfaces/tables -I/idsdk7/source/public/interfaces/text -I/idsdk7/source/public/interfaces/graphics -I/idsdk7/source/public/libs/widgetbin/includes -I/idsdk7/source/public/interfaces/workgroup -I/idsdk7/source/public/interfaces/interactive -I/idsdk7/source/public/interfaces/interactive/ui -I/idsdk7/source/public/interfaces/colormgmt -I/idsdk7/source/public/interfaces/utils -I/idsdk7/source/public/interfaces/incopy -I/idsdk7/source/public/interfaces/layout -I/idsdk7/source/public/interfaces/architecture -I/idsdk7/source/public/interfaces/cjk -I/idsdk7/source/precomp/common -I/idsdk7/source/public/includes -I/idsdk7/source/public/libs/publiclib/plugins -I/idsdk7/source/public/libs/publiclib/files -I/idsdk7/source/public/libs/publiclib/objectmodel -I/idsdk7/external/asl/boost_libraries -I/idsdk7/source/sdksamples/common -I/idsdk7/external/afl/includes -I../Source -I/CS5Test/Prj/build/CS5Test.build/Default/Debug.build/DerivedSources/i386 -I/CS5Test/Prj/build/CS5Test.build/Default/Debug.build/DerivedSources -include /idsdk7/source/precomp/gcc/PluginPrefix.pch -c /CS5Test/Prj//idsdk7/source/sdksamples/common/SDKPlugInEntrypoint.cpp -o /CS5Test/Prj/build/CS5Test.build/Default/Debug.build/Objects-normal/i386/SDKPlugInEntrypo int.o
i686-apple-darwin10-gcc-4.2.1: /CS5Test/Prj//idsdk7/source/sdksamples/common/SDKPlugInEntrypoint.cpp: No such file or directory
i686-apple-darwin10-gcc-4.2.1: warning: '-x c++' after last input file has no effect
i686-apple-darwin10-gcc-4.2.1: no input files
Command /Developer/usr/bin/gcc-4.2 failed with exit code 1
Without using environment variable everything works fine . (i.e when I give SDK's dir path like ../../ i.e relative to my project)

There is workaround : http://stackoverflow.com/questions/12629395/weblogic-using-environment-variable-double-quotes-in-arguments-in-server
Just posting here for reference. Let's see if we get a different answer from anyone else.

One important feature of Desktop options - "Security devices" under Advance tab had been removed in Firefox for Mobile, anyone knows why?

One important feature of Desktop options - "Security devices" under Advance tab had been removed in Firefox for Mobile, anyone knows why?

- ability to choose deletion of an email on handset only
- desktop software working with all older BB's allowing drag and drop type of transferring data, contacts etc. (BB link doesn't recognize my old Storm)
- auto power on/off
- contacts syncing with yahoo & Outlook (almost two weeks trying to work around it and no luck)

I have a Mac desktop OSX Version 10.7.4 upgraded to Lion to use iCloud. Now my Parallels Desktop 5 for Mac/Build 5.0.9376 using Windows 7 does not open. What upgrade of Parallels do I need to make this work?

I have a Mac desktop OSX Version 10.7.4 upgraded to Lion to use iCloud. Now my Parallels Desktop 5 for Mac/Build 5.0.9376 using Windows 7 does not open. What upgrade of Parallels do I need to make this work? Or what do I need to do at this point?

Thank you Shootist007. I appreciate it!

I want to build a custom flash player for my desktop

I want to build a custom flash player for my desktop, using C# and Visual Studio 2008. Where do I start? I just want a real simple one to play swf files. Play, stop, loop, full screen, normal size. I'll start there. Where do I go? I've searched the web for an answer, and found several example projects that don't compile, or are incomplete. It's very frustrating. This shouldn't be that difficult.

I think you started the right way - looking for example programs.
If they won't compile, then they probably contain errors. Fix the errors until they compile. Then develop your own extensions.
This is one way of developing applications, the other way is starting from scratch.

What laptop to get for CS5 or CS6...

Increasingly there appear questions about which laptop to get for CS5/6.
First, the question is why a laptop and why not a desktop?
Laptops are always at least 2 to 3 times slower than a desktop, they are significantly more expensive than a desktop with the same or better performance and they need a wall outlet to use. Batteries don't last long enough for editing and you need a wall outlet for external components (disks, monitor, BD-R etc.) that are required. All that makes a laptop more like an expensive, underpowered luggable machine.
For video editing machines it is always best to use a machine for video editing only and use a second system for other applications and this is especially true for much weaker laptops than desktops.
So, let me repeat the question: What are the considerations to use a laptop over a desktop? You have to be very clear about it to sell the idea to the one responsible for the budget. You also have to be clear about the performance penalty, if you decide to go forward with a laptop.
OK, we got this out of the way. You have good arguments to get a laptop and you have succesfully sold the idea to the one responsible for the available budget.
So what are your choices and what do you need to look for in terms of specs?
First, let me remind you of the article Adobe Forums: What PC to build? An update... because it contains a number of relevant issues that influence your choice. Basically there are three approaches possible:
Get a laptop from a brand company like Asus, Dell, HP, Lenovo, Toshiba and the like.
Get a customizable laptop from specialist companies like Sager or Clevo.
Get a custom builder like ADK Video Editing build you a system tuned to your needs.
All these solutions have a number of common components, under the assumption you want to edit HD material:
CPU: at least a quad core i7 processor, preferably with hyper-threading. The faster the better.
GPU: at least a nVidia GTX 660M or better with 1+ GB DDR5 memory.
Disks: at least 2 internal 7200 RPM disks.
Connections: minimum is eSATA plus USB3 ports.
Monitor: at least 1920 x 1080 resolution and 15.4" screen size or bigger.
Memory: bare minimum is 8 GB but workable is only 16 or 32 GB.
Looking at brand names one may come up with a short-list like:
Now, in their standard configurations they are all lacking on some aspects. Insufficient memory, only single disk, or lacking connections. If these can not be configured to meet the above practical minimum requirements, where at least 2 disks is the most crucial, there is only companies like Sager and Clevo to look at. Something like this is about bare minimum, because of the underspecced video card:
Despite the price this will still be around 3 times slower than an equally priced desktop. If that performance penalty is too big, then one can consider a system like this:
Again, despite the price, this system will still be more than 2 times slower than a far less expensive desktop, but hey, you knew that when you decided on a laptop and got approval for the budget, right?
The last option is to go to a custom builder to get a laptop that is exactly tuned to your needs and budget. It will not be less expensive than the Sager route, but it will get you the best balance between performance and price for your needs. Additionally, you get great service if ever needed.
To sum this up, a laptop is a compromise. A compromise in performance and price. It is not for the faint of heart, faint of wallet. It is not a laptop, it is a luggable system on a wall outlet. An alternative is coasters under a desktop system and you can use other wall outlets as well, but with a better price and far better performance.
I hope this will help people to decide if they really need a laptop and if affirmative, to get the right system for their needs.

As usual, Harm has provided very knowledgeable and helpful advice in this matter. I would like to add that if you are inclined, and feel it's worth a gamble.....New Egg has been selling refurbished Asus i7 laptops that have almost all the necessary components for a lower price than normal. You may have to add more memory yourself and add a quality SSD for OS and programs and pagefile, ( cloned from the supplied drive). Then, use the supplied drive for media and all else in the second bay....or, as an emergency backup of your original configuration. I am not sure,but I think if you put a second Marvell controlled SSD in the second bay instead,( Corsair Pro or Plextor Pro...no Sandforce), you may get the benefit of SATA III speeds from BOTH drives for best laptop performance.....I am not sure if earlier criticisms of SSD degradation still apply with these newer Marvell controlled SSDs.
      I DO know that my old Asus G73JW tested MUCH FASTER on Harm's PPBM5 benchmark when I added extra memory,( from 8 to 14GB ), AND used a Corsair Force 120GB SATA II SSD in each of the two internal drive bays. On that site you can see similar laptops to mine performing way slower using less memory and conventional spinning HDDs. At the time, I was careful to choose SSDs that had a high read AND write speed. I have had no issues with my SSDs. I also have used the Seagate Momentus XT hybrid HDD as project drive.....and scored lower on the PPBM test,( not submitted).
      Harm is right.....any laptop will not approach the performance of a good desktop setup....not to mention PPro CS 6 appears to be even more powerful and demanding than the 5.03 I'm using. People are reporting needing at least 32GB memory and more than 2GB video card memory to get better performance.
   Someone posted about Exotic PC selling upgraded laptops, ( some Asus) with up to 32GB memory and muliple HDD configurations....you may be able to upgrade a laptop similarly yourself for less money. Watch the sales at Tiger Direct and New Egg....you may find some thing workable.

Another "will this set-op be OK for CS5.5?" post.

This is yet another "is the computer I want good enough for CS5.5" question. Before I begin I'll ask you to please forgive my ignorance and the length of this post. I'm new to having to care about computer hardware. In the past any decent PC has met my needs, but I'm no longer finding that to be the case as I now have a need to edit video.
So I'll start with my particular needs. I need portability. I'm a student and direct a summer camp. In my role at camp I have identified the need to improve our camp promotional material, and that's where the video editing comes in. I'll be shooting and editing several promotional shorts and a couple of documentary style shorts using DSLR footage and perhaps a little camcorder or two. After much research, and playing around with some free trial software, I've settled on CS5.5, but there's only one problem, my computer just isn't up to the task. Conveniently enough, my current computer has seen better days and it's time to upgrade anyways, so I've been researching and shopping around trying to find an appropriate computer. As portability is a must, and I can't afford a decent desktop and a laptop (and even if I could always transferring data back and forth would be annoying), I've been looking at laptops. It seems like any off-the shelf laptop that is well suited to run adobe isn't really all that portable. Sure you can transport it a lot easier than a desktop, but you can't expect to get a full day of battery life out of it, nor is it a reasonable weight to carry all over creation (my point is that a 17" laptop is out). So I did a little digging, and after reading a lot of posts on this forum and a lot of information from other sources I think I've come up with a solution. I'm looking for input into potential problems any tech-savvy people see with my idea, and sales reps for dell aren't tech savvy, so I figured this was a good place to find out how well adobe would run on my proposed set-up (I'm not a pro, and won't be editing feature length films, so I don't think I need the same performance as a tricked out desktop, I just need it to perform well with as few hold ups as possible).
Here's what I've come up with:
Dell XPS 14z:
Intel core i-7 2640M (2.8GHz, with "turbo boost" up to 3.50GHz)
8 GB Dual Channel DDR3 SDRAM
750 GB SATA, 7200rpm hard drive
Nvidia Geforce 520M 1GB graphics card
The only information on screen resolution I could find on the Dell web-site was "true 720p HD display" after reading a few reviews, I found the specs were lower than the minimum recommended by Adobe, I forget exactly what they are though.
So this computer is more than I would ever need for my non-video editing needs. On paper it's a nice little laptop, a little pricey ($1300!), but they can be had at a very reasonable price ($700 - $800) refurbished from the Dell online outlet. None-the-less I can see several problems with this set-up.
First is the Display: it's inadequate. That's easily solved by using an external monitor, and you can get a pretty decent monitor off of tiger direct for less than $200. I can tolerate video editing at a desk, I need portability for other applications.
Second is the hard drive. From reading this forum I understand that editing with only one hard drive can slow things down quite a bit. I was wondering how big a deal this really is for the casual editor? There are adaptors that allow you to place a second hard drive where the optical drive is in this laptop. If it's necessary, I plan on putting a second 750GB 7200 rpm HDD where the optical drive is. Problem solved, right? Does anyone see any problems with this idea? My next question about the hard drive topic is: how much would a third hard drive really benefit me? And would data transfer using an external HDD with a USB 3.0 connection be fast enough to be a viable option for a third drive? Either way I could pick up an appropriate hard drive and caddy for a little under $175 and around $100 for an external HDD with USB 3.0 to be used as a third drive if necessary.
The third potential problem is the RAM. It seems there are a lot of opinions out there about how much is enough. Is 8 GB adequate? According to intel's web site this particular processor is compatible with up to 16GB of RAM, and after searching various forums I found a couple instances of people expanding their RAM on this computer to 16GB with no issues. I understand that I can replace the current 2x4GB set up with either 1x4GB + 1X8GB or 2x8GB to give either a total of 12 or 16GB of RAM. Is this necessary or even beneficial? 8GB would be more than enough for anything else I do, and since I have little experience with video editing I thought I'd ask those who know. Is a RAM upgrade necessary? Using this configuration I could update the RAM to 12 GB for around $100 and to 16 GB for around $200.
Finally, the graphics card that comes with this computer isn't on the list of cards recommended by Adobe. I understand that this is because it doesn't support CUDA, how much of an issue is this? Will I be able to efficiently edit video without a recommended card?
The point of all the numbers is this: 800+200+175+100=1,275. For $1275ish it seems to me I could get a very reasonable video editing set up that's still portable. That's less than the sticker price on these laptops, and a lot less than a mac book pro, which is everyone's first recommendation when I mention I want to use the computer for video editing. This seems like a very reasonable price for a laptop with an intel i7 2.8GHz, two 750GB 7200rpm HDD's, 12GB of RAM, and an external monitor for when I want to sit down and edit. Am I delusional in thinking this would run well using CS5.5?
So I guess the point is this. Life is about trade offs, and since I primarily need portability and I'm not a professional (just an anal consumer with high standards :), I'm willing to trade a little bit of video editing performance for the improved portability. I want the opinion of those who have experience using CS5.5 with various set-ups, does my proposed set-up seem like a reasonable trade-off? Are the upgrades even neccessary? Would they be enough to provide a reasonable editing experience? Any other advice (besides buying a desktop or a wicked expensive 17" laptop that weighs two to three times as much and chews through battery life)?
Thanks for sticking with this and giving me any feedback. It's appreciated!

Benson,
Glad the comments were helpful!
Regarding RAM, the following test results were mine from an old thread:
"...RAM size: increasing from 4GB to 8GB doubled the MPE GPU performance [11 sec. vs. 6 sec.] and improved the MPEG2-DVD performance [122 sec. vs. 91 sec.]; the other tests only improved marginally. Increasing from 8GB to 16GB made significant additional improvements to the MPEG2-DVD time [91 sec. vs. 37 sec.]; all other tests hardly changed at all". [Note that my testing, and current system, run 5.0.3, not 5.5, but I suspect that these results are still probably reasonable for your situation.]
Thread was: http://forums.adobe.com/message/3465135 (How changes to CPU speed, RAM size, and drives impacted my PPBM5 score)
Regarding graphics card RAM, either card would work just fine for you. User's that have a need for massive frame sizes might benefit from the 3GB model, but for normal HD work the 1.5 will be fine.
Regards,
Jim

Best $3K off the shelf system for CS5??

for us newbies...what
would be the Best $3K off the shelf system for CS5??
thx

ok...dell and hp steal
you blind on necessary upgrades...is the customer support and "security" offered by
them a good enough trade off with the "build it yourself/have it custom built" danger of not knowing what to do if/when things go wrong?
i am just looking to do low level (but high quality) professionasl stuff...i.e. budget weddings/training/memorials/recitals etc. and feel i am not far enough along on the high tech learning curve...but moving as fast as i can.
ALSO...and maybe this is another conversation...but:
is the miniDV tape (for SD and HDV) about over now and are we comletely into the "tapeless" video era?
thanks for all your help.

Hard Drive setup for CS5 master collection

Dear All,
I am looking for advice on what drive configuration to use. I am currently reformatting all drives for a new cs5 install and have the following drives:
1. WD Raptor 10000rpm 150gig
2. WD Raptor 10000rpm 300gig
3. Seagate 7200 rpm - 1.5tb
4. Seagate 7200 rpm - 1.5tb
I have read various forum messages, but need some clarification on what to install on what drive
I have Windows 7 Ultimate 64-bit with 6 gig memory and i7 processor
I assume windows is best installed on either of the faster WD drives. and my video projects on the seagate drives.
Where should cs5 program files be ?
I have raid options but dont know a lot about the best set up
Any advice most welcome, would like to try to get it right first time!
Regards
Chris Anderson

Hi Harm
many thanks for your reply. I am considering purchasing new HD's specific to build a machine just for CS5.
What would you recommend for performance. No price budget as such.
Im thinking 15000rpm.
Im thinking SATA - is this the fastest?
Do i have to consider the motherboard to support fast sata drives? - i am confused as i see you can get sata drives with a 6gig transfer speed, does this depend
on the motherboard?
Would a bigger cache ie 64mb make a good improvement?
Any advice most welcome
Thanks
Chris Anderson

Building a budget desktop PC for CS5 (under $1,700)

Similar Messages

Maybe you are looking for