Building a .rtexe Takes an Unreasonable Long Time

Hi all, I have found that building .rtexe's for a mid-sized LVOOP application takes an unreasonably long time.
In some cases the wait is in excess of ~3h before the compile completes. Debugging any deployment issues on .rtexes then quickly becomes intractable, tedious and costly.
The class hierarchy below:
Any takes on the issue?
Br,
/Roger

Intaris wrote:
You know it would be nice if people would actually give enopugh information so that we can help.
We do actually like helping but if you want to play the game of looking for problems, than you're going to be running low on helpers I'm afraid.
I was referring to your question whether what you provided a few posts earlier is enough when it should be rather clear that it cannot be enough to help solving your problem.
But hey, it's your problem and not mine so why should I bother?  Your contributions ont he forum int he last time have been rather neagtive int one and since we're volunteers here it doesn'0t exactly make me want to spend my own time in helping you.  Sorry, that's just the way the world is.
Shane.
Yes, I am a very negative person.
If you got nothing that provides some valuable or additional information, refrain from posting to my threads. Thanks.
Br,
/Roger

Similar Messages

  • Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help.   Is th

    Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help.
    Is there another way to adjust tempo of loops the faster way, any other technique?

    No clue why the final processes have suddenly started to take so long. Two things I'd try: a) capture from an older tape to see if some problem with the new tape is at fault.  And b) check the health of your RAM and the hard drive.
    The red frame sounds a bit like a glitch we used to have in OnLocation (actually in its predecessor HDV Rack) which was caused by a partial GOP. But that was a product of HDV Rack recording from the live video stream. It turned out that HDV cameras intentionally interrupt the data stream for an instant upon starting to record--specifically to avoid recording a partial GOP to tape. So my gut says that the tape has partial GOPs at the points where you stopped/started recording.

  • Mac Air takes a very long time when manually putting to sleep

    I put my Mac Air in sleep mode from the apple icon after Im dont using it but sometimes takes a very long time to shut down. Then Im not sure if sometimes it goes into sleep mode by itself first. My mac notebook as soon as you hit sleep it shut down instantly. Anyone else have this problem?

    I put my Mac Air in sleep mode from the apple icon after Im dont using it but sometimes takes a very long time to shut down. Then Im not sure if sometimes it goes into sleep mode by itself first. My mac notebook as soon as you hit sleep it shut down instantly. Anyone else have this problem?

  • Macbook Pro, bought 2012, takes a very long time to start up/restart (5 mins). How do I fix this?

    My Macbook Pro, bought 2012, takes a very long time to start up/restart (5 mins) every single time I have shut it down.  I try not to shut it down at all now because once or twice, I have got a grey screen, and then nothing. I've held down the power button to shut down again and restart  How do I fix all this?

    Start up with your built-in Recovery disk by holding down the Command and R keys when starting. Open Disk Utility from there and use it to REPAIR your disk (you've already verified it and it came up with errors).
    With any luck, your problems will be solved. While I was there, I would also repair  permissions.
    Good luck,
    Clinton

  • It takes a very long time to download an app on my iPad 3

    It takes a very long time to download an app on my iPad 3. My WiFi is OK, and the first 75 % of the program downloads in a fast way, but then it nearly stops. The rest (25%) takes such a long time to install

    my e-mail is [email protected]

  • Since itunes and apple tvs latest update I have had problem wtching movies on apple tv via my itunes can any one help, movie takes a very long time to load sometimes never, it use to work really well, whats going on please help?

    Since itunes and apple tvs latest update I have had problem wtching movies on apple tv via my itunes can any one help, movie takes a very long time to load sometimes never, it use to work really well, whats going on please help?

    You might find useful information in item D1 of Time Machine Troubleshooting.

  • Takes a very long time to load pages and is laggy

    The new''' FF (4) '''was good at first, but recently it is starting to lack the goodness it once had.
    '''It is becoming slower and slower by the day and takes a very long time to load pages. Sometimes the "loading" icon circles for 5 minutes, and whether the page loads or not depends on my luck at that time.'''
    Also, it has become seriously '''laggy''':
    '''Scrolling''' up and down, typing and '''filling out forms''' (like writing this message) etc have slowed down.
    I have deleted the history, and cleared the cache, but to no avail.
    Could it be some of the add-ons?
    Or is it that FF4 was all hyped up and '''''can't stand to it's name'''''? :)
    Please help.
    Info: Vista 64-bit, 4GB ram, 2.33GHZ....can't be my computer!

    You could try to disable this feature for now by toggling this pref on the <b>about:config</b> page:
    *devtools.debugger.source-maps-enabled = false

  • After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this?  Thanks in advance.

    After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this?  Thanks in advance.

    I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.

  • I have a keynote presentation that includes a significant amount of video.  When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)?

    I have a keynote presentation that includes a significant amount of video.  When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)?  I edit the presentation depending on the audience to which I am presenting.

    If you add a new  slide with just a text box (therefore a very small amount of data),  to an existing presentation then save,  Keynote will only save the new content to the file,  it wont save  pre-existing content as its already included in the file.
    The time  taken to "save" will be very much shorter than a "save as" when all of the existing content is saved again.

  • My lap top is extremly slow. It studders. It kind of sounds like there is a fan inside and it constantly stopping and starting. And, it takes a really long time for it too start up. Whats wrong with it?

    My lap top is extremly slow. It studders. It kind of sounds like there is a fan inside and it constantly stopping and starting. And, it takes a really long time for it too start up. Whats wrong with it?

    Do you have current backups?
    Those symptoms could indicate a failing Hard drive. If it dies, all your documents go with it unless you have Backups.
    I have had very good luck with physical and battery problem diagnosis at the Genius Bar. Those guys put their hands (and their ears) to these machines, all day every day, and they know immediately what all those sounds mean.
    Your appointment for an evaluation is FREE, in warranty or out.

  • Bank statement import FF_5 sometimes takes a really long time

    Hello!
    In the middle of august we started to have problems with bank statement import FF_5 - sometimes (but not always) it takes a really long time (3 - 4 hours) to import data - usually it would take from few minutes to 1 hour (depending on size of import file). There is no error, the documents that match are posted automatically like always, the amount of documents, that are not posted automatically, is the same as always... We didn't do any new settings in system.
    We tried to find cause with debugger and sql trace, but there was no error - the import program works ok, then suddenly it stops in one line and searches in cluster table RFBLG without filled field GJAHR (year) - that means that it searches among approx 7.400.000 records (the size of our RFBLG is appr. 12 Gat the moment).
    We don't have ideas any more, how to find a cause for strange behaviour. The problem is, that there is no rule - sometimes it's ok, sometimes it works very slow - no matter how big the import file is. The problem occurs with all bank files (we have 3 banks).
    Do you maybe have any suggestions, what to do and how to find and eliminate the cause?
    Thankyou in advance for your tips!
    Meti

    Hi Meti,
    Have you tried analysing differences between files that it goes slow on and files where it goes quickly?  Sounds like there is some difference in file data that causes it to do a lookup.  If the traecs are not finding the differences, it might be wortwhile to put the file data into Excel for a slow and a fast and compare field level data?
    Regards,
    Tony

  • TS3276 When I send an email no matter how small it now seems to take a much longer time than usual (by watching the gear wheel spinning). Anyone have any ideas how I can get my sending back to a much shorter time?

    When I send an email no matter how small it now seems to take a much longer time than usual (by watching the gear wheel spinning). Anyone have any ideas how I can get my sending back to a much shorter time?

    Have you burned Discs with other programs using this computer? Are you certain that you have a drive that will burn discs?

  • Query takes very very long time to display on the web portal.

    HI Gurus
    My query takes very very long time to display the result on the web.It takes almost 30 mins to show the
    results.However when I execute the same query in analyzer it shows the result in 10 Sec.
    Gurus could u please let me what r the steps required to increase teh performance of it.
    What steps BI Consultant take to resolve it . Is it a portal issue.
    Regards
    loyee

    Hi,
    you can use the following parameters to the start URL: &PROFILING=X&TRACE=X. They could be set in iView of Portal as well as the url of the webtemplate. You will get information about performance of the web application.
    Additional check this notes:
    NW 7.0 BI Web Applications: Performance Problem Analysis
    SAP Note Number: [1048691|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler]
    Performance problems when you start a query in Java Web
    SAP Note Number: [950602|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler]
    Also intresting threads:
    Re: Poor performance Web vs Bex
    Re: BEx vs the Web : Which provides better performance
    Regards
    Andreas

  • After installing Lion my time machine using a Time capsule backups take a very long time, particularly indexing the back up, does any one know why and a fix?

    I have installed Lion over Snow Leopard and noticed a marked increase in the time it takes my time capsule/time machine to back up.  It seems to spend a very long time indexing the back up.  Does any one know why and more importantly is there a "fix"?

    The first index with Lion takes a very long time.  Could take over 10 hours.  You just have to wait.  You can see the progress by opening Console and entering backupd in the search box

  • Signature verification in Adobe Reader 10 takes a VERY long time...

    I work for a restaurant chain that uses PDFs for their new hire paperwork. We use a signature pad to sign the documents, and the documents have 51 signature boxes. Due to signature verification, it takes an absurdly long time to complete the paperwork (up to 60 minutes). Is there a way to disable the signature verification? It's incredibly frustrating to the management staff to have to sit in the office for an hour just to fill out a document that should only take about 15 minutes.

    I'm also experiencing the same issue where we go to open a document and it takes a long time to verify each of the signatures. Have you found a solution to this?

Maybe you are looking for

  • Section header with portrait and landscape view

    My iBook project is being created so that it is available in both portrait and landscape view. This has been a tricky process since alot of content was distored when I created the layout using landscape and then attempted to adjust the portrait view

  • Can I still get apple care?

    Hey, I was wondering can I still get apple care on my Mac BookPro 13" I got it in Late 2011?

  • Reporting designer - problem with insertin query

    hi, I have problem with inserting query into reporting designer, when i do it there occurs metadata error and the system write check query, but query is ok, there are no variables. Have you any idea whats the problem. thanx

  • Valuation category for DIEN material type

    Dear all, I have a requirement in which I need to maintain two price for  DIEN material type ,I have created two valuation type and asssigned to a valuation category and If Itry to assign valuation category in Material master it is Grayed out ,even i

  • New to MAC - trying to sync iphone and Mac Pro with imac

    Hi, Just made the switch to Mac. Purchased my Mac Pro yesterday, loaded .Mac, and plugged in my iPhone to the computer. Followed the steps to Sync iCal and contacts from iPhone and although it is registering there is a phone and downloading photos, i