Building Address Information

Hi All,
Looking for some help with what should be an easy question. I am running an Infoset Query (Ad-hock) to extract the Building address where an employee as worked since being defined in SAP. When I run the query, it collects and shows the date ranges, the Centres and all other information correctly, but populates the same Address information for all entries (Even though they are clearly meant to be different).
as anyone came across this in the past and if so, how do you work round it??
Cheers
Dave

Hi,
It looks like the adhoc query is throwing the only available result from the cache memory.
You need to go the Query designer and build the Query based on the infoset and redefine the Query structure.
Hope this gives an understanding of the problem.
Ravi Sundaresan

Similar Messages

Logon Error Message - Enterprise Services Builder address not maintained

Hi Experts,
I'm about to start the configuration on PI PROD (PI 7.1) server, but I keep encountering an error, saying "Service cannot be reached"
Service cannot be reached
What has happened?
URL http://hostname:port/nwa call was terminated because the corresponding service is not available.
Note
The termination occurred in system PIP with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If it is a valid URL, check whether service /nwa is active in transaction SICF.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:XXXXX_PIP_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
What's more weird is that I can't launch sxmb_ifr because 'Enterprise Services Builder address not maintained'.
I already made some RFC Destination such as AI_DIRECTORY_JCOSERVER, AI_RUNTIME_JCOSERVER, LCRSAPRFC, and SAPSLDAPI and when I test the connection, here's the error message said 'Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67'
Thanks for the reply.

Hello,
Check if you have more than one system. If so, check whether host, port and URL of startpage are maintained on the correct one.
Also, please follow the MANUAL steps of the SAP Help link below:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
Ensure you have created the RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59
(ABAP) and the Visual Administrator (Java):
AI_RUNTIME_JCOSERVER
AI_DIRECTORY_JCOSERVER
LCRSAPRFC
SAPSLDAPI
Last, please check whether, In tcode SM59, the destination INTEGRATION_DIRECTORY_HMI.
The user maintained in the Logon tab should be PIISUSER
and ensure he password is correct,and check if the destination will test successfully.
All of those will solve this issue
Regards,
Caio Cagnani

Automate the creation of Active Directory users with organization/address information

On one of our Domain Controllers we regularly have to create new users with fully populated organisation/address information, as they use a server-side application which appends email signatures at the end of all of their emails created from this information.
At the moment we have to fill this information out manually and it can sometimes cause inconsistencies if the information is not uniform or is typed incorrectly.
Is there any way to automate this/do it in bulk?

This is another Powershell script that can be used:
http://www.wictorwilen.se/how-to-use-powershell-to-populate-active-directory-with-plenty-enough-users-for-sharepoint
Note that you have two ways to do that:
Create a new User account Provisioning script and include the Street update as part of it
Have a daily scheduled script that will run against your users OUs and update the Street address for user accounts having it wrong or missing
From my point of view, option 2 would be the best as it will make a Bulk update and Bulk correction if required.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Why can't I edit all of address information for Siri to use?

I have been playing around a lot with Siri lately. Unfortunately she doesn't seem to want to play with me. I have been trying to find a way for Siri to remind to complete a task after I leave from a location other than my home or work address. At first I realized that I did not have other addresses other than my home and work address stored under my contact information in my address book. After I tried to tell Siri to remind me to complete a task after I left my gym for example, Siri told me that this information was not entered and that I should edit my information which I tried doing. The problem is that I was not able to change the name of the address information in my address book from "other" to "gym". Is there anyway to get around this?
I have also noticed that when I ask Siri to remind to complete a task after I leave a location (e.g. "work") she reminds me to complete the task when I arrive at the location. There must be a way for Siri to distinguish between me arriving at a location and me leaving that location.
My final gripe is that Apple does not have anywhere for me to submit feedback on Siri or its Maps services. I do not understand how Apple expects to improve these two critical areas of their user experiences without allowing people to provide suggestions for improvement.

So I read through some feedback posted on here and was able to answer my first question. The second issue remains a problem however.

Intigration builder address not maintained error

Hi All,
While accessing intigration builder in ECC5, i am getting the following error.
"Intigration Builder address not maintened"
Along with this error teh following directory was opened automatically..
"C:\Documents and Settings\sundaramj\SapWorkDir"
can any one provide solution for this problem?
regards,
sundaramj

Hi,
Are you getting this error in the Browser ?
These blogs will help you on the logon issuses-
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
Integration Builder Address not maintained
REgards,
Moorthy

Alternative Payer Address information stored in REGUH table

Hi
Is there a setting that would tell the system to use Alternatine Payer Address information to be used and stored in table REGUH?
Whenever there is a Payer that has the Alternative Payer set, the system is using its Address information instead of Address from Original Payer.
Any help on this topic is very much appreciated.
Best regards, Maikol M.

Alternative payers are maintained in the vendor master data or can be entered in a document from the list maintained in vendor master. Payment program uses the alternative payer instead of the original vendor info while creating the check.

Building addresses in training and events

My client is going to expand in a very short period from now. It has some building addresses as of now, but will be increased in future. Can the Core Team Member include new building addresses through transaction S_AHR_61011843?
Points assured!
Thank you,
Nivedita.

Hi,
Here we need to create the our company building address.
Whereever we are going to conduct the trainings to the employees, that places here we need to define.
Good luck
Devi

ABAP Proxy Error - Integration Builder address not maintained

I intend to use ABAP proxy between R/3 (ECC 6.0) and XI (PI 7.0).
On configuring the relevant connections, I run SPROXY and get the following error:
Integration Builder address is not maintained in the Exchange profile (Connections)
I have created the connx LCRSAPRFC & SAPSLDAPI from R/3 to PI but the connectivity does not work.
On running the reports
SPROX_CHECK_IFR_RESPONSE
SPROX_CHECK_HTTP_COMMUNICATION
SPROX_CHECK_IFR_ADDRESS
SPROX_CHECK_IFR_CONNECTION
My question is:
What is the Program to be used in LCRSAPRFC & SAPSLDAPI? I have used LCRSAPRFC_<sys id of XI server>
and SAPSLDAPI_<sys id of XI server>
Should the XI Integration Builder address be maintained in R/3?
If yes, is there any place where IB address can be maintained in R/3 (I believe there is no such thing as exchange profile in R/3. then how can IB address be maintained in R/3??...pls correct if I am wrong)
If IB address of XI has to be maintained in R/3 then can anyone pls tell me how to do it?

Just recheck the steps with this and come up with doubts then
How do you activate ABAP Proxies?
Regards,
Prateek

Address information on BP General ledger

hi experts,
How we can get address information related to the particular Business partner in BP's general ledger screen.
Am getting the BP code and name in the standard PLD itself, but i can not fetch address information to the PDL.
If am trying to do so, system will pick the first record information and list it out in print preview.
any possibilities to get address information on PLD ?
regards,
Sanju M S

Hi Sanju,
It is not possible in SAPB1. Check the thread,
Re: Business partner address
Try to Create QPLD.
sorry, now i'm out of station & i dont have any database
so now i can not test your requirement in my database.
SELECT distinct T1.[RefDate], T1.[BaseRef], T1.[Memo], T0.[Debit], T0.[Credit],T1.[LocTotal],
T2.CardCode, T2.CardName, T2.Address, T2.Balance
FROM JDT1 T0
INNER JOIN OJDT T1 ON T0.TransId = T1.TransId
LEFT JOIN OCRD T2 on T2.CardCode = T0.ShortName
WHERE T2.[CardName] =[%0]
Regards,
Madhan.

Need to pull vendor address information from PO

Hi Friends..
I am creating a shipper instructions smartform and need to display shippers address in the form.. For that purpose i need to pull the vendor address information from the PO...
Can some one tell me the data extraction logic involved here like what tables i need to access to get the required vendor address and flow of it...
Here the client is creating the PO and also sending the shippers instruction form when PO is created as far as i my understanding...
Thanks,
Kanthi..

Hi
When a PO is created, at that time you need to enter vendor number (LIFNR).
The details of different vendors are maintained in table LFA1.
The tables for PO are EKKO (header table) and EKPO (line item table).
But, if you want to capture the vendor address for printing, you only need to know the PO number (EBELN field). And, then you can proceed like:
Select LIFNR from EKKO into <yourDefinedVAR> where EBELN = XYZ.
Select <requiredAddressFields> from LFA1 into (....) where LIFNR = <yourDefinedVAR>.
So, finally, if you know the PO number, you can find rest of the things.
Regards
Ashish

Ship To Address Information

Hi All,
We have an issue with the way SAP handles address informaion in the SAP Ship -To address field on the Sales Order. SAP applies the country address formatting and stores the ship-to address in the header of the sales order as one long string of text. This means it loses all structure and meaning ie. the country code, post code etc are lost so no analysis can be carried out.
This may be fine for the example where the address information is already stored on the Business Partner record which we can reference, however for 1 off addresses where the user just enter details into the Address2 field there is no guarenteed way to extract the information.
My proposal is for SAP to keep the ship-to address as a series of fields in the sales order header and to apply the country address format in the print layout designer thus keeping the address structure and meaning.

Hi Sekar,
In Address tab of business partner master , when you define a new ship to address there is a button Excise Information .
Just click on that and feed the required information. That will serve your purpose.
Thanks
Malhaar

Copying Account Address Information to a Contact

Is there a way that the associated Account Address information can be copied to the Contact Address area on a Contact by Contact basis without doing it for all Contacts?
Is there a button or anything that can be pressed on a Contact screen?

Contact Address have two address fields. Account Address field is coming from Account and Contact's Address (which can be different).
I don't think it is possible to populate Account's Address into Contact's Address automatically.
-Mani

Address Information

I am trying to write a query that would pull in to a UDF field address information.
Is there away I can pull the full ship to address in and format it properly.
Bill to Name
Street
Block
city, state, zip?
With Gordon's help I was able to get the Address name from the CRD1 table using this query
SELECT Distinct T2.Address, T2.Street, T2.City, T2.State FROM dbo.OCRD T1 LEFT OUTER JOIN dbo.CRD1 T2 ON T1.CardCode = T2.CardCode WHERE T2.AdresType ='S' AND $[OSCL.CUSTOMER] = T1.CardCode
Using Crystal I am having a hard time pulling the full address just using the address name.
Thanks

Thanks Gordon
That was the problem. Here is the final query with the spacong and commas for state and zip code.
SELECT Distinct T2.Address +CHAR(13) + ISNULL(T2.Street, '') + CHAR(13) + ISNULL(T2.Block, '') + CHAR(13) + ISNULL(T2.City, '')+ ', '+ ISNULL(T2.State, '')+ ', '+ISNULL(T2.ZipCode, '') FROM dbo.OCRD T1 LEFT OUTER JOIN dbo.CRD1 T2 ON T1.CardCode = T2.CardCode WHERE T2.AdresType ='S' AND $[OSCL.CUSTOMER] =T1.CardCode
And the even bewtter news was I was able to just drag this field in to the Crystal form and did not have to manipulate.
Appreciate the help and the extra set of eyes.
Steve

Bank/Address information update/payslip Generation

Hi Experts......
i got a following requirement in portal can any of u guys provide ur inputs for the following queries......
1) Should allow annuitants (retirees who get annuity payment) to access their payslips / monthly statement online
2) Should also allow them to update their bank and address information
3) Should provide a feature for them to download the annuity control declaration form
Thanks in Advance
Jasmine

I would appreciate your help and advice. thank you very much.

HOw do I update my address information in autofill

How do I change my address or add another credit card to the autofill feature?

Just change your Contact address information card in Contacts.

Building Address Information

Similar Messages

Maybe you are looking for