Building an i5-2500 desktop...not powering on
Hi there,
I am building an i5-2500 desktop with 16gb of Patriot DDR3 ram. I am using my old Corsair 520w psu and an Geforce 430 Fermi gfx card. I have checked everything to make sure all the cables are tightly plugged in. When I goto turn it on the psu fan spins at the same time as the cpu fan, and does that once. There's a lighton the board that turns on so I'm assuming my PSU isn't able to handle the new CPU. I am running 2 sata drives. There is no video or beeps. Please any advice would be appreciated. I am heading to the store in a bit to checkout a new PSU. Thanks!
Sean
Do you have onboard video? You might need to go into the BIOS(while plugged into the onboard video) and set it to use the PCI card.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.
Similar Messages
-
Playbook not powering up, not charging, nothing
My BB playbook is not powering up when placed in the charging cradle or when plugged into a computer. I have tried hard restart and all kinds of things - I am not even getting a red light.
is there any way I can get it restarted, rebooted, or something so that it can take a charge. I know it has to be powered up to charge - but right now nothing is working. Please help!paulmitt wrote:
but is there a chance that my playbook is just finished ....:
Nope! It's just deeply and severely drained, and you'll notice references to that in the KB articles I linked for you.
This happened on one of my PlayBooks recently, and it too some patience and work...if it's not TOO deeply drained, you will begin to see some life eventually via the no battery icon, or a low orange glowing pulsating LED at the top of the device.
If it is VERY deeply drained, you will need to eventually use the PlayBook debricking method to bring it back to life. You will lose all media, pictures, etc., on the device however, if you have not made a previous backup.
Try this, while connected to your charger. Press and hold the Power key, up and down volume (-/+) all three buttons simultaneously, for about 10-12 seconds. You should the red LED blink and that should allow a reset of the PlayBook and to power up.
After charging 24+ hours:
1- Press the powerbutton for about 20 seconds
2- Charge PB for 2 minutes (use stopwatch)
3- Disconnect powercable for 8 seconds
You have to repeat step 2 and 3 total of 10 times. Then reboot by pressing power and + key for 22 seconds.
Other users have reported this reset their device and got it working.
You need to follow these instructions to "debrick" your PlayBook:
1. (skip this if the devce is dead due to no battery charge) Do a backup of your PlayBook using your computer and BlackBerry Desktop Software version 7 installed. It can be downloaded from http://us.blackberry.com/apps-software/desktop/
2. (skip this if the devce is dead due to no battery charge) Unplug the PlayBook and on the PlayBook press and hold down the power button until the unit forces the device off.
3. With the Desktop Software still open on your computer and the PlayBook powered off, connect the PlayBook to your computer once again.
4. You should see an error screen from Desktop Software popup with the options to Retry, Update, or Cancel.
Very quickly choose the Update option.
5. All information will on your PlayBook will be erased and a reload of the Software will commence to install on the PlayBook.
6. Once this is complete your PlayBook will go back through the initial (as if new) setup wizard (entering the BlackBerryID, etc., and then you can perform a restore using Desktop Software to return your personal data from the backup. Applications which you downloaded from AppWorld won't restore, but they can be easily reinstalled using AppWorld > MyWorld section of AppWorld.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I have bought a HP DC7700 and it is not powering up.
I was wondering if there is a way to distirnguish whether the fault is with the motherboard or the power supply?
Cheers
This question was solved.
View Solution.You would probably be throwing good money after bad replacing components via trial and error.
You can get a used but working one for cheap on eBay.
http://www.ebay.com/sch/Desktops-AllInOnes-/171957/i.html?_from=R40&_sop=15&LH_BIN=1&_nkw=dc7700 -
My laptop does not power up at all. I removed the battery, and unplugged the power adapter, held down the power button for 30 seconds to drain any build up. Then I plugged in the power adapter (only the power adapter, NO battery), and pressed the power up button to turn the laptop on, but nothing powers up at all..NO lights or LED's come on. Only light that glows when I plug in the power adapter, is the small light near the power input hole where the adapter connects to the laptop.
I replaced my power adapter with a brand new one (original equipment) and the same thing happens.
What is the next step in troubleshooting this problem?Hi there @gd2554,
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that your notebook is not powering up at all, and that you have replaced the power adapter with a new one. I am happy to help.
Are you connected directly to a wall outlet or going through a power bar? If possible use a direct power connection.
Next, if you haven't already, try using a different power outlet entirely.
Did you replace the entire power adapter including the power cord (assuming it is one of the adapter with a brick and a removable cord going to the wall outlet? Be sure to use the replacement cord as well, if you haven't already.
Then try going through all of the following:
Computer Does not Start (Windows 7, Vista, XP)
Battery Charging Is Not Indicated in Vista or Charging LED Does Not Turn On
If there is no sign of life then it is likely the issue is on the main board of the notebook itself, in which case, I would recommend, calling our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping! -
Not able to spy objects in ie9 using coded UI Test Builder Spy, giving exception - "Interface not registered(Exception from HRESULT:0X...."
I am not able to capture any objects of my web application using coded ui recorder. Even though it is a simple html page, coded ui is showing a message -"Interface not registered(Exception from HRESULT:0X...."
Please give me solution , why this is hapening. I am having problem with object identification. Even I am not able to identify any object in google.com.
swapnanil senguptaTechnologyName is displaying as "MSAA" . But my application is a Webapplication.If I try to spy the google .com's search field then also TechnologyName is displaying as "MSAA". Is it any configuration issue of vsts codedui.
swapnanil sengupta -
How do I get my widgets to come up on my desktop not on a new screen
how do I get my widgets to come up on my desktop not another screen
System preferences > mission control > uncheck "show dashboard on a new screen"
-
[SOLVED] multipath-tools build fails because file is not a directory
Hi all,
I'm trying to build the multipath-tools-git AUR package (I'm playing around with virtualization, and need the kpartx tool). I tried building, and got this output:
(NOTE: /home/gregory/AUR PACKAGES is symlinked to /mnt/STORAGE/AUR PACKAGES, which shows up in this build. I tried building without using the symlink, and it didn't change anything.)
[gregory@whitcomb multipath-tools-git]$ makepkg -s
==> Making package: multipath-tools-git 1295.81895af-1 (Sat Sep 7 16:50:52 EDT 2013)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Updating multipath-tools-git git repo...
Fetching origin
==> Validating source files with md5sums...
multipath-tools-git ... Skipped
==> Extracting sources...
-> Creating working copy of git repo...
Cloning into 'multipath-tools-git'...
done.
==> Starting pkgver()...
==> Starting prepare()...
==> Removing existing pkg/ directory...
==> Starting build()...
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmultipath'
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o memory.o memory.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o parser.o parser.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o vector.o vector.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o devmapper.o devmapper.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o callout.o callout.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o hwtable.o hwtable.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o blacklist.o blacklist.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o util.o util.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o dmparser.o dmparser.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o config.o config.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o structs.o structs.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o discovery.o discovery.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o propsel.o propsel.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o dict.o dict.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o pgpolicies.o pgpolicies.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o debug.o debug.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o regex.o regex.c
regex.c: In function ‘re_match_2’:
regex.c:3297:17: warning: variable ‘sdummy’ set but not used [-Wunused-but-set-variable]
const char *sdummy;
^
regex.c:3296:20: warning: variable ‘pdummy’ set but not used [-Wunused-but-set-variable]
unsigned char *pdummy;
^
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o defaults.o defaults.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o uevent.o uevent.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o switchgroup.o switchgroup.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o uxsock.o uxsock.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o print.o print.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o alias.o alias.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o log_pthread.o log_pthread.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o log.o log.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o configure.o configure.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o structs_vec.o structs_vec.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o sysfs.o sysfs.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o prio.o prio.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o checkers.o checkers.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o lock.o lock.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o waiter.o waiter.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o file.o file.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o wwids.o wwids.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -c -o prioritizers/alua_rtpg.o prioritizers/alua_rtpg.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -Wl,-soname=libmultipath.so.0 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -DLIBDM_API_FLUSH -D_GNU_SOURCE -DLIBDM_API_COOKIE -o libmultipath.so.0 memory.o parser.o vector.o devmapper.o callout.o hwtable.o blacklist.o util.o dmparser.o config.o structs.o discovery.o propsel.o dict.o pgpolicies.o debug.o regex.o defaults.o uevent.o switchgroup.o uxsock.o print.o alias.o log_pthread.o log.o configure.o structs_vec.o sysfs.o prio.o checkers.o lock.o waiter.o file.o wwids.o prioritizers/alua_rtpg.o -lpthread -ldl -ldevmapper -ludev
ln -sf libmultipath.so.0 libmultipath.so
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmultipath'
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmultipath/prioritizers'
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o random.o random.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libpriorandom.so random.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o const.o const.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libprioconst.so const.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o hp_sw.o hp_sw.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libpriohp_sw.so hp_sw.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o emc.o emc.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libprioemc.so emc.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o rdac.o rdac.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libpriordac.so rdac.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o alua.o alua.c
alua.c: In function ‘get_alua_info’:
alua.c:58:6: warning: variable ‘aas’ set but not used [-Wunused-but-set-variable]
int aas;
^
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libprioalua.so alua.o alua_rtpg.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o ontap.o ontap.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libprioontap.so ontap.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o datacore.o datacore.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libpriodatacore.so datacore.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o hds.o hds.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libpriohds.so hds.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o weightedpath.o weightedpath.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libprioweightedpath.so weightedpath.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o iet.o iet.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libprioiet.so iet.o
rm random.o weightedpath.o ontap.o hp_sw.o hds.o rdac.o const.o datacore.o emc.o iet.o
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmultipath/prioritizers'
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmultipath/checkers'
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o libsg.o libsg.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o cciss_tur.o cciss_tur.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libcheckcciss_tur.so libsg.o cciss_tur.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o readsector0.o readsector0.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libcheckreadsector0.so libsg.o readsector0.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o tur.o tur.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libchecktur.so libsg.o tur.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o directio.o directio.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libcheckdirectio.so libsg.o directio.o -laio
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o emc_clariion.o emc_clariion.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libcheckemc_clariion.so libsg.o emc_clariion.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o hp_sw.o hp_sw.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libcheckhp_sw.so libsg.o hp_sw.o
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I.. -c -o rdac.o rdac.c
cc -Wl,-O1,--sort-common,--as-needed,-z,relro -shared -o libcheckrdac.so libsg.o rdac.o
rm tur.o hp_sw.o rdac.o readsector0.o cciss_tur.o emc_clariion.o
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmultipath/checkers'
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmpathpersist'
cc -Wall -fPIC -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist *.c
cc -shared -lpthread -ldevmapper -ldl -L../libmultipath -lmultipath -Wl,-soname=libmpathpersist.so.0 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist -o libmpathpersist.so.0 mpath_persist.o mpath_updatepr.o mpath_pr_ioctl.o
ln -s libmpathpersist.so.0 libmpathpersist.so
/usr/bin/gzip -9 -c mpath_persistent_reserve_in.3 > mpath_persistent_reserve_in.3.gz
/usr/bin/gzip -9 -c mpath_persistent_reserve_out.3 > mpath_persistent_reserve_out.3.gz
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmpathpersist'
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/multipath'
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -c -o main.o main.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath main.o -o multipath -Wl,-O1,--sort-common,--as-needed,-z,relro -lpthread -ldevmapper -ldl -L../libmultipath -lmultipath -ludev
/usr/bin/gzip -9 -c multipath.8 > multipath.8.gz
/usr/bin/gzip -9 -c multipath.conf.5 > multipath.conf.5.gz
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/multipath'
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/multipathd'
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist -c -o main.o main.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist -c -o pidfile.o pidfile.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist -c -o uxlsnr.o uxlsnr.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist -c -o uxclnt.o uxclnt.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist -c -o cli.o cli.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist -c -o cli_handlers.o cli_handlers.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist main.o pidfile.o uxlsnr.o uxclnt.o cli.o cli_handlers.o -Wl,-O1,--sort-common,--as-needed,-z,relro -lpthread -ldevmapper -lreadline -ludev -ldl -L../libmultipath -lmultipath -L../libmpathpersist -lmpathpersist -o multipathd
/usr/bin/gzip -9 -c multipathd.8 > multipathd.8.gz
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/multipathd'
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/mpathpersist'
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist -c -o main.o main.c
cc -g main.o -o mpathpersist -Wl,-O1,--sort-common,--as-needed,-z,relro -lpthread -ldevmapper -L../libmpathpersist -lmpathpersist -L../libmultipath -lmultipath -ludev -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I../libmultipath -I../libmpathpersist
/usr/bin/gzip -9 -c mpathpersist.8 > mpathpersist.8.gz
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/mpathpersist'
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/kpartx'
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o bsd.o bsd.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o dos.o dos.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o kpartx.o kpartx.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o solaris.o solaris.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o unixware.o unixware.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o dasd.o dasd.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o sun.o sun.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o gpt.o gpt.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o mac.o mac.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o ps3.o ps3.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o crc32.o crc32.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o lopart.o lopart.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o xstrncpy.o xstrncpy.c
cc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"usr/lib64\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DLIBDM_API_COOKIE -c -o devmapper.o devmapper.c
cc bsd.o dos.o kpartx.o solaris.o unixware.o dasd.o sun.o gpt.o mac.o ps3.o crc32.o lopart.o xstrncpy.o devmapper.o -o kpartx -ldevmapper
/usr/bin/gzip -9 -c kpartx.8 > kpartx.8.gz
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/kpartx'
==> Entering fakeroot environment...
==> Starting package()...
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmultipath'
install -d /home/gregory/AUR packages/multipath-tools-git/pkg/multipath-tools-git//usr/lib
install -m 755 libmultipath.so.0 /home/gregory/AUR packages/multipath-tools-git/pkg/multipath-tools-git//usr/lib/libmultipath.so.0
install: target ‘packages/multipath-tools-git/pkg/multipath-tools-git//usr/lib/libmultipath.so.0’ is not a directory
make[1]: *** [install] Error 1
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmultipath'
make: *** [recurse_install] Error 2
==> ERROR: A failure occurred in package().
Aborting...
[gregory@whitcomb multipath-tools-git]$
I noticed there was a typo from the line:
install: target ‘packages/multipath-tools-git/pkg/multipath-tools-git//usr/lib/libmultipath.so.0’ is not a directory
with the duplicated slash, so I edited the package() section of the PKGBUILD to remove the duplicated slash
make LIB="/usr/lib" DESTDIR="${pkgdir}" install
to
make LIB="usr/lib" DESTDIR="${pkgdir}" install
However, rebuilding the package caused the same error to occur (only relevant part shown)
==> Starting package()...
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmultipath'
install -d /home/gregory/AUR packages/multipath-tools-git/pkg/multipath-tools-git/usr/lib
install -m 755 libmultipath.so.0 /home/gregory/AUR packages/multipath-tools-git/pkg/multipath-tools-git/usr/lib/libmultipath.so.0
install: target ‘packages/multipath-tools-git/pkg/multipath-tools-git/usr/lib/libmultipath.so.0’ is not a directory
make[1]: *** [install] Error 1
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools-git/src/multipath-tools-git/libmultipath'
make: *** [recurse_install] Error 2
==> ERROR: A failure occurred in package().
Aborting...
So that couldn't have been the problem. There doesn't seem to be any indication on the AUR page that someone else ran into this problem. I also checked the upstream site as well as the mailing lists, and didn't see anything resembling my problem.
Just to make sure that I hadn't downloaded some bad build from git, I also tried installing the multipath-tools package from the AUR, since that should have at least worked for the packager. However, I got the exact same (albeit sooner cause it didn't have to download git sources):
==> Starting package()...
make[1]: Entering directory `/mnt/STORAGE/AUR packages/multipath-tools/src/libmultipath'
install -d /mnt/STORAGE/AUR packages/multipath-tools/pkg/multipath-tools/usr/lib
install -m 755 libmultipath.so.0 /mnt/STORAGE/AUR packages/multipath-tools/pkg/multipath-tools/usr/lib/libmultipath.so.0
install: target ‘packages/multipath-tools/pkg/multipath-tools/usr/lib/libmultipath.so.0’ is not a directory
make[1]: *** [install] Error 1
make[1]: Leaving directory `/mnt/STORAGE/AUR packages/multipath-tools/src/libmultipath'
make: *** [recurse_install] Error 2
==> ERROR: A failure occurred in package().
Aborting...
I'm guessing there's probably some configuration issue with my machine causing this problem, but I have no idea where it would come from. If anybody else has any other ideas on how to proceed, I'd be really appreciative. And if any more information is needed, let me know! Thanks!
Last edited by cactaur (2013-09-08 05:23:36)Of course, soon after I post this, I stumble upon the solution. It turns out that having a path with a space in it can cause certain packages to bug out while building. I changed the "AUR Packages" folder to "AUR-packages", and then it built successfully. Guess that's something to look out for.
-
My iphone 5 is not powering the scree, when i connect the iphone to the power it only vibrates
my iphone 5 is not powering the scree, when i connect the iphone to the power it only vibrates o make the connect sound (is like the sound when you connect the phone to power) and the screen remains black, itunes recognizes the iphone, but i cannot do a hard reset because the power button does not work, and have password in my phone so itunes wond restore it. i want to know if is a hardware problem like the mother board o something. help please
If you have iOS 7 installed, you can try to restore it via the instructions given by lllaass in https://discussions.apple.com/thread/5634135
As an alternative, you could take it to an Apple store genius bar and have the techs test it and see what is wrong beyond the failed power button. -
Copying iMovie back to tape: "your firewire camera is not powered on"
I'm trying to follow iMovie 6 instructions for copying a movie back to tape.
I connected my camcorder to the computer with the firewire cable, and it shows up in the Share-->Video Camera menu as an attached device. (It's a Canon Elura 100, btw.)
So all seems well until I start the procedure, and then I get a "Cannot Export to Camera" error message that says "your firewire camera is not powered on or is not available."
My ever so slow brain thinks this might have something to do with the fact that I'm using the DV/firewire cable that I used to import the footage into my iMac, and maybe it only sends stuff OUT the firewire end, and won't send video the other way?
Do I need a different kind of firewire cable?Thanks for your assistance!
I bought this camcorder from Amazon.com (USA) and I have not daisy-chained it anywhere. I've only connected it to one device at a time. It is capable of receiving digital as well as analog video, and can convert analog to digital.
For example, I used my stereo-video cable to transfer footage from an old VHS tape played by our VCR to my Canon Elura camcorder via the Canon's AV terminal.
Once the tape was safely transferred into my Canon camcorder, I then plugged my DV/firewire cable into the Canon's DV terminal, and the firewire end of it into the iMac. iMovie saw the Canon camcorder and imported all the footage very nicely.
Now I would like to transfer the edited footage from iMovie back to a mini DV tape, and my iMovie help file says I can do it, but it's a little sketchy on what cables I should be using.
The firewire/DV cable I used to send the footage IN to iMovie isn't working to receive the edited footage OUT of iMovie. So maybe I need a different kind of firewire cable?
Thanks for any help you can offer! -
'build waveform' in cluster-constant not possible?
I would like to read a 2d-array of a cluster from file that contains - beside 4 clusters - a waveform.
As far as I understand, you have to determine the byte-stream-type for the "read-file" operation.
In order to do so I tried to generate a 2d-array-constant that contains the cluster mentioned above with all values as empty constants.
But soemhow it doesnt seem to work for "build waveforms". I am not able to put the waveform inside the cluster!?
Any ideas so far?
Thanks in advance
ThomasI'm a lttle confused. You can put a waveform datatype inside a cluster and put that cluster inside an array and make that array multi-dimensional. This is all easily done on the front panel. Putting a function like "Build Waveform" inside a cluster doesn't work any more than trying to put an arithmetic function inside a cluster. Clusters hold valid datatypes, not functions. If I've misunderstood your problem, could you explain a little more?
-
4s with latest software update will not power off, text will only vibrate, iPod only works with earphones. When I sync it with iTunes it works until power save mode starts, then back to not powering down, making text sounds, or playing iPod out loud.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM instead.
Am I overlooking something? Should I need to prepare the image in a different way? (Sysprep differently?)
ThanksHi,
Thank you for your posting in Windows Server Forum.
Can you specify the error which you are facing during VDI setup for server 2012?
I might think that you need to check the memory setting for server 2012, as might happens that due to less memory you can’t setup the VDI setup properly.
Memory: If the Master VM is configured with static memory, it must have at least 1024 MB as startup RAM. If the Master VM is configured with dynamic memory, the maximum RAM must be at least 1024 MB.
Please check beneath article for information.
Windows
Server 2012 2,500-user pooled VDI deployment guide (Doc)
Single Image Management for Virtual Desktop Collections in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki -
My apple tv3, serial no. C07JWBZ9DRHN is not powering on. Connected with Computer, with micro USB cable with power on, it is not shown in Devices. How to rectify
You have to remove all cables before connecting to your computer with micro usb. Power is only connected when using a 3rd gen device and done after the initial connection.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US -
How to print to my wireless all in one photosmart prem c410 when printer is not powered on?
how to print to my wireless all in one photosmart prem c410 when printer is not powered on?
Hi,
You cant print to a printer that you physicly turned off. Most network printer have a sleep mode, so leave it on and after a while it should go into a sleepmode. And should wake up when a printjob is being sent.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution" -
27" thunderbolt monitor is not powering back on with Laptop
Since updating to the new version of Yosemite my 27" thunderbolt monitor is not powering back on when plugged into my laptop via the thunderbolt port. Suggestions on how to get it back up?
Apple Support had me reset the SMC and after doing so my monitor came back up and functioned like it was supposed to. Support said sometimes after updates we need to reset the SMC if changes aren’t cleared from the previous update resulting in behaviors like I was experiencing. Below are the steps i followed to reset the SMC.....
1. Shut down the computer.
2 Plug in the MagSafe or USB-C power adapter to a power source and to your computer.
3 On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
4 Release all the keys and the power button at the same time.
5 Press the power button to turn on the computer.
On MagSafe power adapters, the LED might change states or temporarily turn off when you reset the SMC.
Maybe you are looking for
-
My Safari is no longer working with many sites. However Chrome and Firefox work fine. I would like to re-install Safari in an effort to clear up the problem I can not resolve.
-
One iMac, 2 users w/2 different Apple id's, how do I make this work?
I have an iMac. My dad has his own iCloud address and his own iTunes Apple id. I have my own seperate iCloud account with a seperate iTunes apple id. I made myself an administror on my dad's computer so that we have our own seperate log in "sides" of
-
Lenovo G510 windows 8revovery disk
Is there a way to buy or get reovery disk for windows 8 pre-installed for lenovo g510. Please do not tell me that I should have created it, as I have not. I would appreciate help and I have the latptop lying for a month now not knowing what to do
-
How to use JMF to play the video data in a array(not in a local file)?
dear all: I am a newer to JMF. Now My program has a thread which is always inputing mpg video data into a static array, so I want to wrap this array as a DataSource, then let the player play the video. But I don't know how to wrap that as a DataSourc
-
Track doesn't show elapsed play time in itunes
hello. when i play a track in itunes, the track window does not show the elapsed time played (although the track title and artist shows). can you help ?