Building an Integration scenario with the Foundation Pack

From what I can see most people use AIA so they can make use of the available PIPS.
Has anybody used just the AIA Foundation pack to build integration scenarios?
We are experiencing many problems just trying to develope a simple end to end process and wondered if anyone had a simple Do's and DOn'ts, or Step by step guide to developing a scenario.
There is a lot of documentation and its very difficult to find the relevant information as it seems to be spread across multiple docs.
Stuart

We have made some small progress using the Foundation Pack 2.3.
I thought i'd share some of my experiences for others who are having problems and finding it difficult to get info.
We used the Artifcat Generater which creates the ABCS (BPEL process).
We found several issue:
1. In ABCS Requester (which calls an EBS implemented as an ESB process) - Partner Links did not work. We were getting Invalid Port Type errors (i will post the error message when i'm back in the office), but on close inspection everything looked ok but just did not work. The simple work around was to delete the Partner Link and re-enter it manually. I wasted days investigating this problem and ended up creating my own test BPEL process calling the EBS to prove it was configured correctly.
2. The XSL stylesheets could not be tested in JDEV. We ended up commenting out many of the generated XSL templates (generated by the Artifact Generater), the main culprit seems to be GetSenderNode template, haven't got to the bottom of the issue but ended up commenting out much of the code, specifically the aia.Getxxxxxx functions. Once I get time and find more information i'll post my findings.
Good luck.

Similar Messages

  • More integration scenarios with the same business system in Int. Direct.?

    Hi guys!
    I need to integrate 5 business systems. I tried to create more integration scenarios (to do it clearly), but it is not possible to add already added business system to any other scenario...
    What's the logic of this?
    Can someone explain me it? Or some link?
    Thanx Peter

    hi Peter,
    have you tried:
    service without party ->
    right click on your business system ->
    add to scenario?
    like this you can add your business system
    to as many scenarios as you wish
    Regards,
    michal

  • ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3

    Hi,
    we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
    Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
    My question is:
    We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
    It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
    Best regards,
    Steven

    Hi Abhishek,
      This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna  maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
    Thanks in advance.
    Regards,
    Arunmozhi.

  • Unable to Load the Integration scenario into the Integration directory

    Hi All,
    I am new to using SAP XI.
    Require your help on the following issue.
    I have built an Integration scenario, added Component  Type: Product Version, inserted actions and connections.
    I did check for any errors. I found no errors.
    When I am trying to load this scenario into the  Integration directory its not showing up the scenario in the popup.
    Navigation:
    Directory > tools> Transfer scenario from repository
    The status of Integration Scenario in the builder shows as
    "Being processed".
    I created the scenario 2 days back.
    Can some one help me in this? 
    Regards,
    Meher

    Hi All,
    Thanks to all who helped me.
    michal,divija : Can you please let me know in details how to activate Business Scenario?
    I did not create any business process.
    Sridhar: I did releases some locks on my process, no luck.
    Can you please explain me in more details?
    Should I have a process build for my Integration scenario to be activated?
    Thanks,
    Meher

  • Synchronous process integration scenario with PI 7.1

    Hi all,
    Iu2019m trying to create a process integration scenario which contains two actions. Both actions use the same synchronous interface to a web service which takes some parameters and returns a value. When I check the configurability it displays the errors:
    Connection from Action1 to Action2 has no outbound interface
    Connection from Action1 to Action2 has no inbound interface
    and the warning:
    Connection from Action1 to Action2 has no mapping
    I first assigned the service interface as outbound interface to Action1 and inbound to Action2. Next I tried to assign the interface in- and outbound to both actions, but this didnu2019t change anything on the message. The same scenario with the interface set to asynchronous seems to be valid (but looses the return value of course).
    Can anyone give me a hint what Iu2019m doing wrong? Is there any special consideration for synchronous communication which doesn't apply for asynchronous services?
    Regards,
    Tarik

    Deleting and recreating the actions and service interfaces exactly the same as they were before solved the problem. Seems as if changes in the interface objects sometimes are not activated correctlyu2026

  • Do I need flash builder 4 to work with the flex sdk?

    Is it necessary to use flash builder 4 to work with the flex sdk?
    Can you build apps just using the open source flex sdk. If so are there tutorials and books on how to do so?
    Thanks in advance for your help.

    No, you don't need Flash Builder to use the Flex SDK. If you download the SDK and unzip it, you'll find a 'bin' directory that has the mxmlc compiler in it. You can compile Actionscript or MXML files using that.
    ./mxmlc MyFlexApp.mxml
    If you are building an AIR application, you will use amxmlc
    ./amxmlc MyAIRFlexApp.mxml
    Then, launch your AIR application using adl
    ./adl.exe MyAIRFlexApp-app.xml
    Hope this helps,
    Joan

  • Cannot build a flow graph with the customized options

    Dear JMF-Gurus,
    we implemented a DataSource for video capturing that is based on the lti-civil API, so that video capturing on Mac OS X should be possible.
    When we try to build the flow graph, we get an jmf-error as described in the following log:
    # JMF Version 2.1.1e
    ## Platform: Mac OS X, ppc, 10.4.9
    ## Java VM: Apple Computer, Inc., 1.5.0_06
    ## DataSource created: net.sf.fmj.media.protocol.civil.DataSource@a76306
    $$ Profile: instantiation: 30 ms
    ## Processor created: com.sun.media.processor.unknown.Handler@21ec03
    ## using DataSource: net.sf.fmj.media.protocol.civil.DataSource@a76306
    $$ Profile: parsing: 377 ms
    ## Getting the supported output formats for:
    ## RGB, 176x144, FrameRate=10.0, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=528
    ## # of nodes visited: 50
    ## # of formats supported: 38
    $$ Profile: getSupportedOutputFormats: 340 ms
    ## Building flow graph for: civil:?
    ## Building Track: 0
    ## Input: RGB, 176x144, FrameRate=10.0, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=528
    ## Custom options specified.
    ## An output format is specified: YUV Video Format: Size = null MaxDataLength = -1 DataType = class [B yuvType = 2 StrideY = -1 StrideUV = -1 OffsetY = -1 OffsetU = -1 OffsetV = -1
    ## An output content type is specified: RAW
    ## Here's the completed flow graph:
          com.sun.media.parser.RawBufferParser@a075e6
             connects to: com.sun.media.codec.video.colorspace.JavaRGBToYUV@9c61d3
             format: RGB, 176x144, FrameRate=10.0, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=528
          com.sun.media.codec.video.colorspace.JavaRGBToYUV@9c61d3
             connects to: com.sun.media.multiplexer.RawBufferMux@da7565
             format: YUV Video Format: Size = java.awt.Dimension[width=176,height=144] MaxDataLength = 38016 DataType = class [B yuvType = 2 StrideY = 176 StrideUV = 88 OffsetY = 0 OffsetU = 25344 OffsetV = 31680
    $$ Profile: graph building: 113 ms
    $$ Profile: realize, post graph building: 9 ms
    $$ Profile: instantiation: 0 ms
    ## Processor created: com.sun.media.processor.unknown.Handler@654dec
    ##   using DataSource: VIC.MonitorCDS@e0c0b6
    $$ Profile: parsing: 1 ms
    ## Getting the supported output formats for:
    ##   YUV Video Format: Size = java.awt.Dimension[width=176,height=144] MaxDataLength = 38016 DataType = class [B yuvType = 2 StrideY = 176 StrideUV = 88 OffsetY = 0 OffsetU = 25344 OffsetV = 31680
    ##   # of nodes visited: 48
    ##   # of formats supported: 37
    $$ Profile: getSupportedOutputFormats: 97 ms
    ## Building flow graph for: null
    ## Building Track: 0
    ## Input: YUV Video Format: Size = java.awt.Dimension[width=176,height=144] MaxDataLength = 38016 DataType = class [B yuvType = 2 StrideY = 176 StrideUV = 88 OffsetY = 0 OffsetU = 25344 OffsetV = 31680
    ## Custom options specified.
    ## An output format is specified: H263P/RTP, 176x144, FrameRate=10.0
    ## An output content type is specified: RAW/RTP
    XX Failed to realize: com.sun.media.ProcessEngine@8393ef
    XX   Cannot build a flow graph with the customized options:
    XX     Unable to transcode format: YUV Video Format: Size = java.awt.Dimension[width=176,height=144] MaxDataLength = 38016 DataType = class [B yuvType = 2 StrideY = 176 StrideUV = 88 OffsetY = 0 OffsetU = 25344 OffsetV = 31680
    XX       to: H263P/RTP, 176x144, FrameRate=10.0
    XX       outputting to: RAW/RTP
    XX Error: Unable to realize com.sun.media.ProcessEngine@8393ef
    ## com.sun.media.BasicFilterModule@31477b: input format changed: RGB, 640x480, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=1920
    We guess that the problem was first the wrong input format (wrong video-size or wrong framerate) but this has been changed to the correct format.
    The flow graph looks like correct, but it doesn't work anyway. 
    What does the last line in the log means, and are there any information were the problem good be located?                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    How were you even able to accomplish that? In my classpath I have fmj-nojmf.jar, jmf.jar and lti-civil.jar but I keep on getting this in my log.
    # JMF Version 2.1.1e
    ## Platform: Mac OS X, i386, 10.5.4
    ## Java VM: Apple Inc., 1.5.0_13
    ## DataSource created: com.sun.media.protocol.javasound.DataSource@f98d58
    I can't get it to find the civil datasource in fmj-nojmf.jar.

  • How to start Integration server with the user XISUPER

    Hi,
    How to start Integration server with the user XISUPER?
    Regards,

    Mahesh,
    In the post installation document, under Creating User XISUPER,
    I see the following,
    1.You must now log on to the Integration server host with the user XISUPER, to switch the initial password to a valid password.
    2.You must restart the J2EE engine to transfer the user creation to the J2EE immediately.
    I am unable to proceed here.Can you please help me to resume the post installation steps ?
    Thanks,

  • Customer specific codelists in integration scenario with CRM onPrem

    Hi,
    we are working on an integration scenario C4C <> CRM onPrem. The businesspartner masterdata should be editable in C4C and CRM.
    We have several customer specific fields on the businesspartner in both systems.
    In CRM we have implemented customizing for the values of these fields via customizingtables that can be maintained with TX:SM30.
    We can also create finetuning-activities for the maintenance of the code lists for these fields in C4C.
    As these customizingtables can have around 1.000 entries per table we are searching for a solution to maintain the values just in CRM instead of maintaining them twice.
    Does anybody has an idea how to replicate customer specific codelist-values from CRM into C4C? Or maybe a valuehelp in C4C that retrieves the values via webservice from CRM?
    Thanks
    Danny

    Hi Danny,
    We have requirement like get all Oper Order based on Account from ECC to cloud and we have successfully achieved using External Web Service Integration.
    We have consume ECC web service integration and retrieve all Open orders based on Account ID and display in the table.
    So as per my knowledge you can read all value using web service call and maintained in custom OVS ( I have never tried ).
    You need to check whether is it possible or not using custom OVS but if it is working for table than it may be work for custom OVS as well.
    Please check this post below may be helpful to you
    SAP Cloud SDK : Bi-directional Custom Web-service Integration with PI
    Regards,
    Mithun

  • Integration scenario with BPM

    Hi all,
    I have an integration scenario: iDoc -> XI -> iDoc,
    On the XI I use a BPM process.
    1. On the Repository:
    I have designed the integration process on the IR, and imported the needed iDoc.
    I have created an integration scenario which consists of two SAP R/3 SWC, and an XI3.0 SWC.
    The XI3.0 is assigned to the integration process.
    2. On the Directory:
    I am using the wizard to configure the scenario.
    I have assigned the R/3 SWC to the required business systems.
    I have created a service named "ProcessBPM" for the integration process and assigned it to the XI SWC.
    all other objects(receiver determination, interface determination... etc.) were created automatically by the wizard.
    when I send the iDoc to the XI, I get an error on the SXMB_MONI:
    Unable to convert sender service ProcessBPM to an ALE logical system.
    What does this error mean ? What have I missed ?
    Is this the way to do the described scenario ?
    Thank you,
    Elad.

    Hi Elad,
    one second
    >>I have entered the logical system name of my XI,
    you enter logical names for r3 business systems (idoc sender or receiver)
    >>Logical system <LS_Name> already exists in service <Service_Name>".
    they have to be unique
    if you're using BMP - try replacing the business system in "header mapping" (sender system) in receiver agreement
    (to your r3 - the one with the unique LS name) - this way you'll be able to use the name as many times as you want:)
    http://help.sap.com/saphelp_nw04/helpdata/en/5d/112d20f6ce6c46ba66afb98d278fbd/content.htm
    Regards,
    michal
    Message was edited by: Michal Krawczyk

  • I can't find the Foundation Pack 11.1.1.4.0 demo

    Hi,
    I installed Foundation Pack(FP) 11.1.1.4.0 for Linux x86 according to the following installation and upgrade guide.
    For installation option I chose the "Complete Install".
    Oracle Fusion Middleware Installation and Upgrade Guide for Oracle Application Integration Architecture
    Foundation Pack 11g Release 1 (11.1.1.4.0) Part Number E17949-02
    After completing the installation I can't find the directory $AIA_HOME/samples.
    In the installation guide of the FP 11.1.1.2.0, there is the chapter about deploying FP demo.
    But there isn't it in the installation and upgrade guide FP 11.1.1.4.0.
    Oracle Application Integration Architecture Foundation Pack 11g Release 1 (11.1.1.2.0): Installation Guide Release 1 (11.1.1.2.0) Part No. E17360-01
    Isn't the demo originally included in FP 11.1.1.4.0?
    Best Regards,
    Mineaki

    Hi,
    I am also looking for the AIA demo for the 11.1.1.4 version.
    Do you know the exact date, when it will be available on OTN?
    Thanks & Regards,
    Karoly

  • Integration Scenario with Oracle SOA Suite and SAP

    Hi to all
    I have the following integration scenario:
    The customer have some applications in the integration landscape. All of this applications are integrated with Oracle Soa Suite.
    This customer, want to buy SAP ERP (ECC 6.0), and they want to integrate SAP ECC in their infrastructure.
    I told to them, that is necesary have Process Integration (PI), by have a services oriented architecture.
    But, I want to hear options, possibilities and comments. Where I find information related ?
    Thank you very much
    Dario

    Hi Rodriguez  ,
    you can use Oracle AS Adapter for SAP for integrating SAP system to oracle .
    some step you need to do in SAP ECC side for data transfer - like create TCP/IP RFC connection ,
    for TCP/IP RFC config. you can generate program ID in Oracle AS Adapter ..Also Oracle provides a SAP JRFC library  for integrating SAP system .
    you can find more information in given link -
    http://www.oracle.com/technology/products/integration/adapters/dev_support.html
    Regards,
    Amit Shivhare

  • Any Scenario with the Screenshots on PI 7.0

    Dear Experts,
    I need any scenario eg., file to file with the screen shots on PI7.0
    ie., 1) SLD configuration (product, swc, TS and BS)
          2) IR and ID
          3) Monitoring details
    Note : Above all i need with the screenshots on PI7.0 only
    Thanks in advance,
    Ramana Kumar. A

    Dear Khan,
    First of all thanks for your advise..
    yesterday i tried to do for File to File scenario in PI 7.0
    So, first i successfully create product and swc, TS .
    But, if i am trying to create BS, i need to assign TS and SWC..
    Regards,
    Ramana.

  • Problems with the performance pack for Linux.

    Hi,
    I have just installed sp9 for WL 5.1 and with it the performance pack. But I
    get many of these exceptions:
    Wed Jun 06 15:46:09 EDT 2001:<E> <HTTP> Connection failure
    java.net.SocketException: Error in poll for fd: '30', revents: '23'
    at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:304)
    at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:129)
    Everything seems to be fine on the site, but that exception does not look good.
    Anybody knows anything about this? Thanks,
    ranko

    Hi all,
    I'm looking for a way to determine the total number of sessions per day or
    the number of requests per day / hour or the current moment.
    The intention is to use this for reporting from the administration point of
    view.
    Thanks in advance
    Michael

  • Creating Process Integration Scenario with synchronous connections

    Hi,
    I'm trying to create a process integration scenario in which the first step is a synchronous call by a B2B supplier to a webservice hosted on PI ccBPM.
    Step1) I have created two swim lanes:
    Lane1: Supplier.
    Lane2: PI ccBPM.
    Step2) I've created an outbound synchronous interfaces for the supplier and an inbound synchronous interface for the ccBPM. I assigned these to two actions.
    Action1: Supplier_Send(OutboundSync)
    Action2: PI_Receive(InboundSync).
    Step3) Assign the actions to the swim lanes.
    Lane1 -> Action1
    Lane2 -> Action2
    Step4) Connect Action1 and Action2. At this step, the connection is shown as asynchronous. Since both the actions are synchronous, this is clearly incorrect.
    Can someone please help?
    Thanks,
    Harsh

    > Connect Action1 and Action2. At this step, the connection is shown as asynchronous. Since both the actions are synchronous, this is clearly incorrect.
    Put actions on same level.
    Connections are sync, when actions are on same level and async, when actions are on different levels.

Maybe you are looking for