Building /deploying sample plugin in WLI 2.1 and WLS 6.1

I'm running WLI 2.1 (service pack 1) and WLS 6.1. I'm trying to build and deploy
the sample plugin (sampleplugin-ejb.jar) but have had numerous problems.
Specifically, though there are no errors and the WLS admin console tells me the
plugin is deployed I cannot actually see any of the plugin actions etc. on the
WLI Studio and am told that the plugin is not loaded when I open the template
definitions.
I've even resorted to deploying the version of the plugin bundled in WLI_HOME\lib\sampleplugin-ejb.jar
i.e. one I didn't build myself but again, although there are no errors, the plugin
does not seem to be correctly loaded.
In order to get this far I've had to include the plugin jar file in the server
CLASSPATH. Otherwise I get an 'java.lang.NoClassDefFoundError: com/bea/wlpi/common/plugin/PluginObject'
error. I know I shouldn't have to include the EJB in the CLASSPATH but it seems
to resolve this error. Perhaps this is contributing to the other problem ????
Any help gratefully appreciated. Has anyone successfully built and deployed the
sample plugin to WLI 2.1/ WLS 6.1 ?

I found WLI sp2.
Thanks.
Sangeetha
"Sangeetha.R" <[email protected]> wrote in message
news:[email protected]..
Thanks Chris.
But, I couldn't find this in the support downloads too.
Could you let me know, from where can I download this?
Thanks,
Sangeetha
"Chris Stead" <[email protected]> wrote in message
news:[email protected]..
Sangeetha,
WLI 2.1 SP2 will go live tomorrow (7/31) and is compatible with WLS 6.1SP3.
Cheers,
Chris
Sangeetha.R wrote:
Is there a service pack for WLI 2.1 that is compatible with WLS 6.1
sp3
Thanks in advance.
Sangeetha

Similar Messages

Getting error as error spawning cmd.exe while building a sample plugin by Dollyxs (Windows)

Hi,
I am still new to indesign plugin development. I am not able to build a
sample project created using Dollyxs on windows for Indesign CS4.
I am getting error as Error spawning cmd.exe .
Am I missing some settings to be made for the project. Can anybody help me
about this problem.B'z I am not able to build plugin and I am new to
Indesign plugin development.
Thanks and Regards,
Ravi Sharma

Path of ant lib is incorrect. Ant resides in - $mw_home\modules\org.apache.ant_1.7.1\lib
Make sure you have set the ant home correctly.
Regards,
Anuj

Wls 7.0 sp2 proxy plugin issue with iplanet6.x and wls 6.1 sp3 app server

Hi,
I've a setup with iplanet 6.x webserver using the wls 7.0 sp2 proxy plugin to
route requests to the clustered app server instances (2 of them) that are in wls
6.1 sp3.
The issue is, I'm noticing that the session is not sticky and is getting routed
onto the other app server instance. The error that I see in the wlproxy.log is
as follows:
*******Exception type [PROTOCOL_ERROR] raised
at line 654 of URL.cpp
Thu Nov 13 11:30:08 2003 failure on sendRequest() w/ recycled connection
to Instance1:7001, numfailures=1
Thu Nov 13 11:30:08 2003 Marking Instance1:7001 as bad
Thu Nov 13 11:30:08 2003 got exception in sendRequest phase:
PROTOCOL_ERROR [line 654 of URL.cpp]: unexpected EOF
reading HTTP status at line 1010
Thu Nov 13 11:30:08 2003 Failing over after sendRequest exception
Thu Nov 13 11:30:08 2003 attempt #1 out of a max of 5
Has anyone seen this issue? Can anyone explain why this issue is occuring.?
Thanks.

Did you find a solution for this problem?
I have somthing very similar going on where I am currently working.
Thanks!
Andy.
"Simple Guy" <[email protected]> wrote:
>
Hi,
I've a setup with iplanet 6.x webserver using the wls 7.0 sp2 proxy plugin
to
route requests to the clustered app server instances (2 of them) that
are in wls
6.1 sp3.
The issue is, I'm noticing that the session is not sticky and is getting
routed
onto the other app server instance. The error that I see in the wlproxy.log
is
as follows:
*******Exception type [PROTOCOL_ERROR] raised
at line 654 of URL.cpp
Thu Nov 13 11:30:08 2003 failure on sendRequest() w/ recycled connection
to Instance1:7001, numfailures=1
Thu Nov 13 11:30:08 2003 Marking Instance1:7001 as bad
Thu Nov 13 11:30:08 2003 got exception in sendRequest phase:
PROTOCOL_ERROR [line 654 of URL.cpp]: unexpected EOF
reading HTTP status at line 1010
Thu Nov 13 11:30:08 2003 Failing over after sendRequest exception
Thu Nov 13 11:30:08 2003 attempt #1 out of a max of 5
Has anyone seen this issue? Can anyone explain why this issue is occuring.?
Thanks.

"Error loading plugins" on sample plugin

This is happening on a new installation of the Illustrator CS6 and new, out-of-the-box builds of sample plugins.
I tried MenuPlay and Annotator in both Debug and Relese with the same error on AI startup.
Here is what I do:
- open xcode project for a selected sample plugin. Build it - both debug and relese configuration,
- copy the AIP file to /Applications/Adobe Illustrator CS6/Plug-ins.localized,
- also:
     changed the owner and permissions of the plugin to be root:admin and rwxrwxr-x,
     moved plugins to a new directory inside Plug-ins and in the place outside of
         /Applications/Adobe Illustrator CS6/ tree with the location specified in Preferences
Any idea what's causing this?

Joe, Unfortunately your symptoms are slightly different than the original posters. Bunny's issue is odd because the plug-in loads on some machines and not others. I'm afraid I'm stumped there. But Joe, I think we could help you if we had some more information about the process you went through to get your samples loaded. It really could be a lot of things at this point. And it would help to know if you're developing on a windows or mac OS, etc. Did you follow the procedures in the "Getting Started Guide" in the docs folder of the SDK?

How to deploy the sample plugins

hi,
I am new to Oracle Enterprise Manager. I have got the setup running. Now, I want to deploy the plugins available under the samples. Can someone tell me the process to do the same. Although there is a readme.txt which has some instructions, I find that that instructions themselves are probably incomplete, it talks about emcli which I had to download and install. Can someone help me build and deploy the plugins in the OEM and see how they work or point me to the right documentation.

Finally I was successfully able to create the plugin archive:
Here are the steps I followed:
Login as oracle user
Download the EDK from setup -> Extensibility -> Development Kit and unpack the zip archive under the same user credentials
If it happens to be any other user you will end up with the same issues as above (and you will have no clue over the error similar as me ).
set the JAVA_HOME to the JDK
Follow the steps of files to copy as given in the README for the sample for which you are going to run create_plugin on
Now go into the bin directory of the edk and execute the command
./empdk create_plugin -stage_dir <EDK_INSTALL_HOME>/samples/plugins/HostSample/demo_hostsample/stage/ -conn_desc <ORACLE_DB_HOST>:1521:<ORACLE_SID> -repos_user sysman -repos_pwd <your password> -out_dir build
And the OPAR archive gets created. Hope this helps for those who encounter similar issues.

[svn:osmf:] 13604: Update build-config files for sample plugins.

Revision: 13604
Revision: 13604
Author:   [email protected]
Date:     2010-01-18 17:09:32 -0800 (Mon, 18 Jan 2010)
Log Message:
Update build-config files for sample plugins.
Modified Paths:
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/AkamaiPluginSample-build-config.xml
    osmf/trunk/apps/samples/plugins/MASTSample/MASTSample-build-config.xml

Thanks Brian. I would certainly appreciate the maintenance and documentation of some of these. The one that most comes to mind is the OSMFTest suite. This would be valuable if only so that developers have some idea of the coverage that's going on under the hood. It would also help for diagnosing what's going on when behavior is not as expected. I was pleased that when I figured out how to compile this directory, I could see that there were 1109 tests, all of which passed except for one that failed due to not being on my local security whitelist.

NoClassDefFoundError exception deplying sample plugin

I'm running WLI 2.1 SP1 and WLS 6.1 SP2.
I've been trying to build and deploy the sample plugin provided by BEA. My thinking
was that 'tweaking' the sample plugin would be an easy way to understand plugin
development. Boy was I wrong !
Unfortunately, I can't get the version of the SamplePlugin that I build to successfully
deploy. I'm trying to deploy to the wlidomain i.e. to a domain where the sampleplugin
is not pre-deployed.
I've deployed using the following command line;
java weblogic.deploy -port 7001 -host witless -component SAMPLE:myserver deploy
security SAMPLE k:\bea\wlintegration2.1\lib\sampleplugin-ejb.jar
Unfortunately I get an exception.
The error is java.lang.NoClassDefFoundError: com/bea/wlpi/common/plugin/PluginObject
The detailed exception is in the attached logfile.
I've tried including the sampleplugin-ejb.jar file in the classpath of the WLI
server but that doesn't seem to make any difference.
Anyone got any ideas ?
[myserver.log]

Tom,
You have to hand edit the config.xml for the domain and add the EJBComponent
element to the WLI application definition.
Mike
"Tom" <[email protected]> wrote in message
news:[email protected]..
>
I'm running WLI 2.1 SP1 and WLS 6.1 SP2.
I've been trying to build and deploy the sample plugin provided by BEA. Mythinking
was that 'tweaking' the sample plugin would be an easy way to understandplugin
development. Boy was I wrong !
Unfortunately, I can't get the version of the SamplePlugin that I build tosuccessfully
deploy. I'm trying to deploy to the wlidomain i.e. to a domain where thesampleplugin
is not pre-deployed.
I've deployed using the following command line;
java weblogic.deploy -port 7001 -host witless -component SAMPLE:myserverdeploy
security SAMPLE k:\bea\wlintegration2.1\lib\sampleplugin-ejb.jar
Unfortunately I get an exception.
The error is java.lang.NoClassDefFoundError:com/bea/wlpi/common/plugin/PluginObject
>
The detailed exception is in the attached logfile.
I've tried including the sampleplugin-ejb.jar file in the classpath of theWLI
server but that doesn't seem to make any difference.
Anyone got any ideas ?

Updating sample plugin in samples domain

I'm running WLI 2.1 SP1 and WLS 6.1 SP2.
I've been trying to make some code changes to the sample plugin and deploy it
to the samples domain.
The sampleplugin-ejb.jar file is pre-deployed to this domain as part of the WLI
deployment unit. The plugin is available after I first install the server.
I made some changes to the plugin and recompiled using the supplied build.cmd.
I then copied the Jar file to the c:\bea\wlintegration2.1\lib directory and updated
the WLI deployment unit using
java weblogic.deploy -port 7001 -host witless update security WLI c:\bea\wlintegration2.1\lib\sampleplugin-ejb.jar
This creates a WLI.jar file in the .wlstaging directory that contains the files
from my modified version of the sample plugin.
When I start the studio and attempt to load the template definition I get an error
telling me the plugin is not loaded.
If I restart the server this error goes away and I can use the plugin actions
etc. from the studio console. Unfortunately it's NOT my modified version of the
plugin, its the version of the plugin that was deployed when the server was installed.
Can anyone tell me the correct steps to follow to change the sample plugin and
deploy the new version in the samples domain.
Thanks !

Tom,
I have had similar problems using weblogic.Deploy for ejbs. Remove the
WLI.jar in the .wlstaging directory. Make sure there isn't anything under
the applications subdirectory related to this either. Since you've already
copied the new jar file to the lib subdirectory just restart the server.
Make sure the EJB deploys during startup.
Generally speaking, stop the server, replaces the jar in the lib
subdirectory and restart the server.
Mike
"Tom" <[email protected]> wrote in message
news:3cbd5cbf$[email protected]..
>
I'm running WLI 2.1 SP1 and WLS 6.1 SP2.
I've been trying to make some code changes to the sample plugin and deployit
to the samples domain.
The sampleplugin-ejb.jar file is pre-deployed to this domain as part ofthe WLI
deployment unit. The plugin is available after I first install the server.
I made some changes to the plugin and recompiled using the suppliedbuild.cmd.
>
I then copied the Jar file to the c:\bea\wlintegration2.1\lib directoryand updated
the WLI deployment unit using
java weblogic.deploy -port 7001 -host witless update security WLIc:\bea\wlintegration2.1\lib\sampleplugin-ejb.jar
>
This creates a WLI.jar file in the .wlstaging directory that contains thefiles
from my modified version of the sample plugin.
When I start the studio and attempt to load the template definition I getan error
telling me the plugin is not loaded.
If I restart the server this error goes away and I can use the pluginactions
etc. from the studio console. Unfortunately it's NOT my modified versionof the
plugin, its the version of the plugin that was deployed when the serverwas installed.
>
Can anyone tell me the correct steps to follow to change the sample pluginand
deploy the new version in the samples domain.
Thanks !

Sample plugins not working with Netscape 7 on Solaris 8.

I'm trying to build a scriptable plugin for deployment into Netscape 7
and Solaris 8.
I finally got mozilla 1.4.1 built under Solaris 8 and deployed the
plugin from modules/plugin/tools/sdk/samples/simple. By deployed I
mean that I copied the libnpsimple.so file to the netscape plugin
directory and copied the .xpt files to the netscape components
directory. I even removed the xpti.dat file from the netscape
components directory so that it will get regenerated when netscape 7
is started.
I started up netscape 7 and checked about plugins and I find the
simple plugin in the list of enabled plugins. So far, so good.
I open the test.html file in modules/plugin/tools/sdk/samples/simple
into the browser and click on the version button and I get an alert
box that displays "undefined". Also, if I reload the page netscape
crashes.
I also tried the scriptable sample plugin with essentially the same
result.
Does anyone know what I need to do to get a sample plugin to work with
Netscape 7 on Solaris 8.
Some help would be very much appreciated.
Thanks.

Start by fixing the Xhtml coding errors:
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.frontiers.uk.net%2F&charset=%28detect+a utomatically%29&doctype=Inline&group=0
And CSS errors:
http://jigsaw.w3.org/css-validator/validator?uri=http%3A%2F%2Fwww.frontiers.uk.net%2F&warn ing=1&profile=css21&usermedium=all
Your 50% site stats probably include Mozilla/Firefox users.
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"pawpour" <[email protected]> wrote in
message
news:fbghtk$o3s$[email protected]..
> Hello everybody
>
> My site is up at www.Frontiers.uk.net. I used
Dreamweaver CS3, with CSS,
on a
> Mac.
>
> It seems to work fine in IE 6 & 7, Firefox and
Safari. When doing a
browser
> compatibility check, I get one error: "Double float
margin bug", which it
says
> affects IE 6. I don't think this is causing a problem.
>
> However in Netscape (I've only tried version 7) the site
looks terrible -
the
> right hand link in the navbar drops down to the second
line.
>
> Also, there are two DIVS, one floated left and one
floating right, and in
> Netscape the right one drops underneath the other. I
know that there can
be
> problems with IE 5, in its dealing with margins but I
havent heard
anything
> about Netscape being a problem? Also I thought that the
IE box model bug
can
> just make the DIVS narrower, not make one drop below the
other.
>
> Dreamweaver isn't throwing up any browser errors for
Netscape.
>
> I thought that hardly anyone would use Netscape, but the
stats for my
site say
> that around 50% of users are using Netscape (which i
find hard to
believe!)
>
> Any ideas what I've done wrong or how to fix this for
Netscape?
>

Deploying sample applications in mosaic

Hello, i want to deploy the applications in Mosaic. I'm following these instructions:
Use the Ant build files provided with the Mosaic ES2 installation to deploy sample applications to the server.
To run Ant, type ant from the command line. When you do not provide arguments, Ant looks for a build.xml file in the current directory.
For descriptions of the sample applications, see Sample applications.
Deploy all samples and demos
In the following directory, run Ant:
[Mosaic ES2 install directory]/samples/
Deploy the general sample applications
In the following directory, run Ant:
[Mosaic ES2 install directory]/samples/general/
Deploy the MAX2009 application
In the following directory, run Ant:
[Mosaic ES2 install directory]/samples/max2009/
I've set the ant_home enviromment variable but it still gives me the 'ant' is not recognized as an internal or external command,
operable program or batch file.
Thanks.

Hodmi, i've done that but now i got this error:
C:\MOSAIC_HOME\samples>ant
Buildfile: build.xml
deploy:
deploy-catalogs:
   [delete] Deleting: C:\MOSAIC_HOME\samples\general\sample_catalog.zip
      [zip] Building zip: C:\MOSAIC_HOME\samples\general\sample_catalog.zip
[mosaic-catalog] Exception in thread "Thread-2" C:\MOSAIC_HOME\samples\general\b
uild.xml:21: Read failed: Server returned HTTP response code: 403 for URL: http:
//localhost:9080/mosaic/catalogs/sample_catalog
[mosaic-catalog]        at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:413)
[mosaic-catalog] Caused by: java.io.IOException: Server returned HTTP response c
ode: 403 for URL: http://localhost:9080/mosaic/catalogs/sample_catalog
[mosaic-catalog]        at sun.net.www.protocol.http.HttpURLConnection.getInputS
tream(HttpURLConnection.java:1313)
[mosaic-catalog]        at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:407)
[mosaic-catalog] --- Nested Exception ---
[mosaic-catalog] java.io.IOException: Server returned HTTP response code: 403 fo
r URL: http://localhost:9080/mosaic/catalogs/sample_catalog
[mosaic-catalog]        at sun.net.www.protocol.http.HttpURLConnection.getInputS
tream(HttpURLConnection.java:1313)
[mosaic-catalog]        at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:407)
     [echo] ${response}
deploy-applications:
[mosaic-application] Exception in thread "Thread-4" C:\MOSAIC_HOME\samples\gener
al\build.xml:33: Read failed: Server returned HTTP response code: 403 for URL: h
ttp://localhost:9080/mosaic/applications/Basic
[mosaic-application]    at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:413)
[mosaic-application] Caused by: java.io.IOException: Server returned HTTP respon
se code: 403 for URL: http://localhost:9080/mosaic/applications/Basic
[mosaic-application]    at sun.net.www.protocol.http.HttpURLConnection.getInputS
tream(HttpURLConnection.java:1313)
[mosaic-application]    at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:407)
[mosaic-application] --- Nested Exception ---
[mosaic-application] java.io.IOException: Server returned HTTP response code: 40
3 for URL: http://localhost:9080/mosaic/applications/Basic
[mosaic-application]    at sun.net.www.protocol.http.HttpURLConnection.getInputS
tream(HttpURLConnection.java:1313)
[mosaic-application]    at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:407)
     [echo] ${response}
[mosaic-application] Exception in thread "Thread-6" C:\MOSAIC_HOME\samples\gener
al\build.xml:42: Read failed: Server returned HTTP response code: 403 for URL: h
ttp://localhost:9080/mosaic/applications/Brokerage
[mosaic-application]    at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:413)
[mosaic-application] Caused by: java.io.IOException: Server returned HTTP respon
se code: 403 for URL: http://localhost:9080/mosaic/applications/Brokerage
[mosaic-application]    at sun.net.www.protocol.http.HttpURLConnection.getInputS
tream(HttpURLConnection.java:1313)
[mosaic-application]    at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:407)
[mosaic-application] --- Nested Exception ---
[mosaic-application] java.io.IOException: Server returned HTTP response code: 40
3 for URL: http://localhost:9080/mosaic/applications/Brokerage
[mosaic-application]    at sun.net.www.protocol.http.HttpURLConnection.getInputS
tream(HttpURLConnection.java:1313)
[mosaic-application]    at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:407)
     [echo] ${response}
[mosaic-application] Exception in thread "Thread-8" C:\MOSAIC_HOME\samples\gener
al\build.xml:51: Read failed: Server returned HTTP response code: 403 for URL: h
ttp://localhost:9080/mosaic/applications/TileGame
[mosaic-application]    at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:413)
[mosaic-application] Caused by: java.io.IOException: Server returned HTTP respon
se code: 403 for URL: http://localhost:9080/mosaic/applications/TileGame
[mosaic-application]    at sun.net.www.protocol.http.HttpURLConnection.getInputS
tream(HttpURLConnection.java:1313)
[mosaic-application]    at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:407)
[mosaic-application] --- Nested Exception ---
[mosaic-application] java.io.IOException: Server returned HTTP response code: 40
3 for URL: http://localhost:9080/mosaic/applications/TileGame
[mosaic-application]    at sun.net.www.protocol.http.HttpURLConnection.getInputS
tream(HttpURLConnection.java:1313)
[mosaic-application]    at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:407)
     [echo] ${response}
[mosaic-application] Exception in thread "Thread-10" C:\MOSAIC_HOME\samples\gene
ral\build.xml:60: Read failed: Server returned HTTP response code: 403 for URL:
http://localhost:9080/mosaic/applications/Default
[mosaic-application]    at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:413)
[mosaic-application] Caused by: java.io.IOException: Server returned HTTP respon
se code: 403 for URL: http://localhost:9080/mosaic/applications/Default
[mosaic-application]    at sun.net.www.protocol.http.HttpURLConnection.getInputS
tream(HttpURLConnection.java:1313)
[mosaic-application]    at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:407)
[mosaic-application] --- Nested Exception ---
[mosaic-application] java.io.IOException: Server returned HTTP response code: 40
3 for URL: http://localhost:9080/mosaic/applications/Default
[mosaic-application]    at sun.net.www.protocol.http.HttpURLConnection.getInputS
tream(HttpURLConnection.java:1313)
[mosaic-application]    at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:407)
     [echo] ${response}
deploy:
deploy-catalogs:
   [delete] Deleting: C:\MOSAIC_HOME\samples\max2009\max2009_catalog.zip
      [zip] Building zip: C:\MOSAIC_HOME\samples\max2009\max2009_catalog.zip
[mosaic-catalog] Exception in thread "Thread-12" C:\MOSAIC_HOME\samples\max2009\
build.xml:21: Read failed: Server returned HTTP response code: 403 for URL: http
://localhost:9080/mosaic/catalogs/max2009_catalog
[mosaic-catalog]        at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:413)
[mosaic-catalog] Caused by: java.io.IOException: Server returned HTTP response c
ode: 403 for URL: http://localhost:9080/mosaic/catalogs/max2009_catalog
[mosaic-catalog]        at sun.net.www.protocol.http.HttpURLConnection.getInputS
tream(HttpURLConnection.java:1313)
[mosaic-catalog]        at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:407)
[mosaic-catalog] --- Nested Exception ---
[mosaic-catalog] java.io.IOException: Server returned HTTP response code: 403 fo
r URL: http://localhost:9080/mosaic/catalogs/max2009_catalog
[mosaic-catalog]        at sun.net.www.protocol.http.HttpURLConnection.getInputS
tream(HttpURLConnection.java:1313)
[mosaic-catalog]        at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:407)
     [echo] ${response}
deploy-applications:
[mosaic-application] Exception in thread "Thread-14" C:\MOSAIC_HOME\samples\max2
009\build.xml:33: Read failed: Server returned HTTP response code: 403 for URL:
http://localhost:9080/mosaic/applications/MAX2009
[mosaic-application]    at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:413)
[mosaic-application] Caused by: java.io.IOException: Server returned HTTP respon
se code: 403 for URL: http://localhost:9080/mosaic/applications/MAX2009
[mosaic-application]    at sun.net.www.protocol.http.HttpURLConnection.getInputS
tream(HttpURLConnection.java:1313)
[mosaic-application]    at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:407)
[mosaic-application] --- Nested Exception ---
[mosaic-application] java.io.IOException: Server returned HTTP response code: 40
3 for URL: http://localhost:9080/mosaic/applications/MAX2009
[mosaic-application]    at sun.net.www.protocol.http.HttpURLConnection.getInputS
tream(HttpURLConnection.java:1313)
[mosaic-application]    at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:407)
     [echo] MAX2009 : ${response}
[mosaic-application] Exception in thread "Thread-16" C:\MOSAIC_HOME\samples\max2
009\build.xml:42: Read failed: Server returned HTTP response code: 403 for URL:
http://localhost:9080/mosaic/applications/RedMAX2009
[mosaic-application]    at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:413)
[mosaic-application] Caused by: java.io.IOException: Server returned HTTP respon
se code: 403 for URL: http://localhost:9080/mosaic/applications/RedMAX2009
[mosaic-application]    at sun.net.www.protocol.http.HttpURLConnection.getInputS
tream(HttpURLConnection.java:1313)
[mosaic-application]    at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:407)
[mosaic-application] --- Nested Exception ---
[mosaic-application] java.io.IOException: Server returned HTTP response code: 40
3 for URL: http://localhost:9080/mosaic/applications/RedMAX2009
[mosaic-application]    at sun.net.www.protocol.http.HttpURLConnection.getInputS
tream(HttpURLConnection.java:1313)
[mosaic-application]    at com.adobe.mosaic.ant.MosaicTask$Reader.run(MosaicTask
.java:407)
     [echo] RedMAX2009 : ${response}
deploy:
BUILD SUCCESSFUL
Total time: 7 seconds
C:\MOSAIC_HOME\samples>
I'm using websphere 6.1.0.2.
I've got the 403 server in websphere.
Is there any procedure or any example to workaround this problem in websphere?
Thanks

Plz help:[unable to deploy sample content]

please help me ,i want to deploy sample content for portal but following error arise
C:\Program Files\Sun\JavaES5\share\ant\bin>ant -buildfile "C:\Program Files\Sun\
JavaES5\portal\samples\portals\build.xml"
Buildfile: C:\Program Files\Sun\JavaES5\portal\samples\portals\build.xml
community:
getConfigLocation:
[echo]
[echo] Please enter the directory where the following files will be fou
nd:
[echo]
[echo] input.properties
[echo] password.properties
[echo] comms.properties (optional: required only when configuring com
munications channels)
[echo]
[echo] For example on solaris: /var/opt/SUNWportal/tmp
[echo]
[echo]
[input] Please enter the samples configuration location:
C:\Program Files\Sun\JavaES5\temp
setInstallationProperties:
[echo] Setting installation properties
setOS:
setSparcProperties:
setLinuxProperties:
setHpuxProperties:
setUNIXProperties:
setWindowsProperties:
[echo] Setting properties specific to Windows platform
checkForUpgrade:
checkForNoUpgrade:
[echo] am.request.portal.id: portal1
setUpgradeProperties:
setProperties:
setLocalUNIXProperties:
setLocalWindowsProperties:
setLocalProperties:
init:
BUILD FAILED
C:\Program Files\Sun\JavaES5\portal\samples\portals\build.xml:16: The following
error occurred while executing this line:
C:\Program Files\Sun\JavaES5\portal\samples\portals\community\build.xml:48: java
.io.FileNotFoundException: C:\Program Files\Sun\JavaES5\portal\samples\portals\c
ommunity\${ps.data.location}\tmp\password869091403 (The system cannot find the p
ath specified)

Hi Shailendra,
Please make sure the "ps.config.location" setting in your C:\Program Files\Sun\JavaES5\temp\input.properties file is correct. On Solaris, this setting defaults to /etc/opt/SUNWportal and on Windows it will need to be changed to the appropriate directory.
The error you are seeing is most likely caused by the "ps.config.location" being inaccurate and the sample config is not finding the PSConfig.properties file.
Hope that helps. thanks ,dean.

Sample plugin

Hi,
I am totally new to Adobe Indesign, having got the task to write Indesign plugins.
So I installed IndesignCS4-SDK and tried to start with sample plugins.
In the SDK there is a batchfile buildAllSamples.bat which I started.
For every every sample project there was created a folder [project].sdk.Resources but all thes folders are empty (?).
Furthermore for every project there was created a '.pln' and a '.pdb.file'
I guess, there is something missing, the so created plugins are not recognized by Indesign.
Compiling one single project in Visual Studio I get the warning:
SDK\build\win\debug\SDK\(WFP.sdk Resources)\*.idrc could not be found.
so what's wrong here?
any help would be appreciated.
Helmut

My administrator installed Visual Studio 2005.
Compiling a sample project, I get the same result as before.
the complete build protocol:
Die temporäre Datei "c:\Users\Helmut.Blass\Documents\Entwicklung\iMatchClientPlugins\IndesignCS5-SDK\SDK\build\win\objd\BasicDialog\BAT00000148007940.bat" wird erstellt. Inhalt:
@echo off
odfrc "c:\Users\Helmut.Blass\Documents\Entwicklung\iMatchClientPlugins\IndesignCS5-SDK\SDK\source\sdksamples\basicdialog\BscDlg.fr" -o ".\..\objd\BasicDialog\BscDlg.fres" -d DEBUG -i ..\..\..\source\sdksamples\basicdialog @SDKODFRCOptions.rsp
if errorlevel 1 goto VCReportError
goto VCEnd
:VCReportError
echo Project : error PRJ0019: Ein Tool hat einen Fehlercode aus folgender Quelle zurückgegeben: "Ein benutzerdefinierter Buildschritt wird ausgeführt."
exit 1
:VCEnd
]Erstellen der Befehlszeile """c:\Users\Helmut.Blass\Documents\Entwicklung\iMatchClientPlugins\IndesignCS5-SDK\SDK\build\win\objd\BasicDialog\BAT00000148007940.bat"""Die temporäre Datei "c:\Users\Helmut.Blass\Documents\Entwicklung\iMatchClientPlugins\IndesignCS5-SDK\SDK\build\win\objd\BasicDialog\RSP00000248007940.rsp" wird erstellt. Inhalt:
/Od /Ob1 /D "_CRT_SECURE_NO_DEPRECATE" /D "DEBUG" /D "STRICT" /D "_VC80_UPGRADE=0x0710" /D "_SECURE_SCL=0" /D "_SCL_SECURE_NO_DEPRECATE" /D "_HAS_ITERATOR_DEBUGGING=0" /D "_WINDLL" /FD /EHsc /MDd /GS- /Yu"VCPlugInHeaders.h" /Fp".\..\objd\BasicDialog\BasicDialog.pch" /Fo".\..\objd\BasicDialog\\" /Fd".\..\objd\BasicDialog\vc90.pdb" /W3 /WX /c /Zi /TP /vmg @"SDKCPPOptions.rsp" /MP
"..\..\..\source\sdksamples\basicdialog\TriggerResourceDeps.cpp"
"..\..\..\source\public\libs\publiclib\statics\PlugInStatics.cpp"
"..\..\..\source\sdksamples\basicdialog\BscDlgNoStrip.cpp"
"..\..\..\source\sdksamples\basicdialog\BscDlgID.cpp"
"..\..\..\source\sdksamples\basicdialog\BscDlgEntrypoint.cpp"
"..\..\..\source\sdksamples\basicdialog\BscDlgDialogObserver.cpp"
"..\..\..\source\sdksamples\basicdialog\BscDlgDialogController.cpp"
"..\..\..\source\sdksamples\basicdialog\BscDlgActionComponent.cpp"
]Erstellen der Befehlszeile "cl.exe @"c:\Users\Helmut.Blass\Documents\Entwicklung\iMatchClientPlugins\IndesignCS5-SDK\SDK\build\win\objd\BasicDialog\RSP00000248007940.rsp" /nologo /errorReport:prompt"Die temporäre Datei "c:\Users\Helmut.Blass\Documents\Entwicklung\iMatchClientPlugins\IndesignCS5-SDK\SDK\build\win\objd\BasicDialog\RSP00000348007940.rsp" wird erstellt. Inhalt:
/Od /Ob1 /D "_CRT_SECURE_NO_DEPRECATE" /D "DEBUG" /D "STRICT" /D "_VC80_UPGRADE=0x0710" /D "_SECURE_SCL=0" /D "_SCL_SECURE_NO_DEPRECATE" /D "_HAS_ITERATOR_DEBUGGING=0" /D "_WINDLL" /FD /EHsc /MDd /GS- /Yc"VCPlugInHeaders.h" /Fp".\..\objd\BasicDialog\BasicDialog.pch" /Fo".\..\objd\BasicDialog\\" /Fd".\..\objd\BasicDialog\vc90.pdb" /W3 /WX /c /Zi /TP /vmg @"SDKCPPOptions.rsp" /MP
"..\..\..\source\precomp\msvc\VCPlugInHeaders.cpp"
]Erstellen der Befehlszeile "cl.exe @"c:\Users\Helmut.Blass\Documents\Entwicklung\iMatchClientPlugins\IndesignCS5-SDK\SDK\build\win\objd\BasicDialog\RSP00000348007940.rsp" /nologo /errorReport:prompt"Erstellen der Befehlszeile "rc.exe /d "_CRT_SECURE_NO_DEPRECATE" /d "DEBUG" /l 0x809 /I "..\..\..\source\sdksamples\basicdialog" /I "..\..\..\source\sdksamples\common" /I "..\..\..\source\precomp\msvc" /I "..\..\..\source\public\includes" /fo".\..\objd\BasicDialog/BscDlg.res" "..\..\..\source\sdksamples\basicdialog\BscDlg.rc""Die temporäre Datei "c:\Users\Helmut.Blass\Documents\Entwicklung\iMatchClientPlugins\IndesignCS5-SDK\SDK\build\win\objd\BasicDialog\BAT00000448007940.bat" wird erstellt. Inhalt:
@echo off
merge_res.cmd ".\..\objd\BasicDialog" BscDlg & echo Deleting old resources... & del /f /s "c:\Users\Helmut.Blass\Documents\Entwicklung\iMatchClientPlugins\IndesignCS5-SDK\SDK\build\win\debug\SDK\(BasicDialog.sdk Resources)\"*.idrc > .\..\objd\BasicDialog\prevDeletedResources.txt & xcopy /Q /E ".\..\objd\BasicDialog\"*.idrc "c:\Users\Helmut.Blass\Documents\Entwicklung\iMatchClientPlugins\IndesignCS5-SDK\SDK\build\win\debug\SDK\(BasicDialog.sdk Resources)\" /Y
if errorlevel 1 goto VCReportError
goto VCEnd
:VCReportError
echo Project : error PRJ0019: Ein Tool hat einen Fehlercode aus folgender Quelle zurückgegeben: "Prälinkereignis wird ausgeführt..."
exit 1
:VCEnd
]Erstellen der Befehlszeile """c:\Users\Helmut.Blass\Documents\Entwicklung\iMatchClientPlugins\IndesignCS5-SDK\SDK\build\win\objd\BasicDialog\BAT00000448007940.bat"""Die temporäre Datei "c:\Users\Helmut.Blass\Documents\Entwicklung\iMatchClientPlugins\IndesignCS5-SDK\SDK\build\win\objd\BasicDialog\RSP00000548007940.rsp" wird erstellt. Inhalt:
/OUT:"..\debug\SDK\BasicDialog.sdk.pln" /INCREMENTAL:NO /DLL /MANIFEST /MANIFESTFILE:".\..\objd\BasicDialog\BasicDialog.sdk.pln.intermediate.manifest" /MANIFESTUAC:"level='asInvoker' uiAccess='false'" /DEBUG /PDB:"..\debug\SDK\BasicDialog.pdb" /SUBSYSTEM:WINDOWS /OPT:REF /DYNAMICBASE /NXCOMPAT /IMPLIB:"..\..\..\build\win\objD\BasicDialog/BasicDialog.lib" /MACHINE:X86 ..\..\..\build\win\objd\PMRuntime.lib ..\..\..\build\win\objd\Public.lib ..\..\..\build\win\objd\WidgetBin.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib
"..\objd\BasicDialog\BscDlgActionComponent.obj"
"..\objd\BasicDialog\BscDlgDialogController.obj"
"..\objd\BasicDialog\BscDlgDialogObserver.obj"
"..\objd\BasicDialog\BscDlgEntrypoint.obj"
"..\objd\BasicDialog\BscDlgID.obj"
"..\objd\BasicDialog\BscDlgNoStrip.obj"
"..\objd\BasicDialog\PlugInStatics.obj"
"..\objd\BasicDialog\TriggerResourceDeps.obj"
"..\objd\BasicDialog\VCPlugInHeaders.obj"
"..\objd\BasicDialog\BscDlg.res"
]Erstellen der Befehlszeile "link.exe @"c:\Users\Helmut.Blass\Documents\Entwicklung\iMatchClientPlugins\IndesignCS5-SDK\SDK\build\win\objd\BasicDialog\RSP00000548007940.rsp" /NOLOGO /ERRORREPORT:PROMPT"Die temporäre Datei "c:\Users\Helmut.Blass\Documents\Entwicklung\iMatchClientPlugins\IndesignCS5-SDK\SDK\build\win\objd\BasicDialog\RSP00000648007940.rsp" wird erstellt. Inhalt:
/outputresource:"..\debug\SDK\BasicDialog.sdk.pln;#2" /manifest
"..\objd\BasicDialog\BasicDialog.sdk.pln.intermediate.manifest"
]Erstellen der Befehlszeile "mt.exe @"c:\Users\Helmut.Blass\Documents\Entwicklung\iMatchClientPlugins\IndesignCS5-SDK\SDK\build\win\objd\BasicDialog\RSP00000648007940.rsp" /nologo"Die temporäre Datei "c:\Users\Helmut.Blass\Documents\Entwicklung\iMatchClientPlugins\IndesignCS5-SDK\SDK\build\win\objd\BasicDialog\BAT00000748007940.bat" wird erstellt. Inhalt:
@echo, die Manifestressource wurde zuletzt um %TIME% am %DATE% aktualisiert > "..\objd\BasicDialog\mt.dep"
]Erstellen der Befehlszeile """c:\Users\Helmut.Blass\Documents\Entwicklung\iMatchClientPlugins\IndesignCS5-SDK\SDK\build\win\objd\BasicDialog\BAT00000748007940.bat"""Die temporäre Datei "c:\Users\Helmut.Blass\Documents\Entwicklung\iMatchClientPlugins\IndesignCS5-SDK\SDK\build\win\objd\BasicDialog\BAT00000848007940.bat" wird erstellt. Inhalt:
@echo off
restore_res.cmd ".\..\objd\BasicDialog" BscDlg
if errorlevel 1 goto VCReportError
goto VCEnd
:VCReportError
echo Project : error PRJ0019: Ein Tool hat einen Fehlercode aus folgender Quelle zurückgegeben: "Postbuildereignis wird ausgeführt..."
exit 1
:VCEnd
]Erstellen der Befehlszeile """c:\Users\Helmut.Blass\Documents\Entwicklung\iMatchClientPlugins\IndesignCS5-SDK\SDK\build\win\objd\BasicDialog\BAT00000848007940.bat"""
Ausgabefenster

Cannot build feeway sample in Sun Studio12

I'm new to Sun Studio. My background is 22 years c/c++ non-unix development (embedded systems & Windows application development).
I'm trying to write a GUI based c++ app for Solaris. I know this is a complete newbie question. Any help will be GREATLY appreciated.
Here's my question/issue: I cannot seem to include <gtk.h>. I've installed every GTK/ GTKMM package I can find. Building/deploying any project that does not use GTK is fine. I cannot for the life of me figure out how to build a GTK app. Even the GtkFreeway example app for Sun Studio fails to compile at #include <gtk.h>.
Thanks in advance,
Mike
MORE INFO:
In Sun Studio 12, I load then select the sample C++ project Freeway_1.
Then I select Tools->Options. Then the Code Assistance Tab. Then I click the C++ tab. Under Include Directories, I add /usr/include/gtk-2.0
Now, in the project header named FreewayWindow.h, on line #46, it reads:
#include <gtk/gtk.h>
I shut down and restart Sun Studio just in case... ;-)
I execute a clean build and immediately get the following error message:
"FreewayWindow.h", line 46: Error: Could not open include file<gtk/gtk.h>.
As a sanity check, I open a terminal window, switch to root, and issue a "find / -name gtk.h".
find replies with "usr/include/gtk-2.0/gtk/gtk.h"
Anyway, at this point I'm completely frigging frustrated. Did Microsoft have a hand in creating this dev tool? It sure seems so...
I'd appreciate any suggestions.
Thanks again,
Mike

Are you running on OpenSolaris? I ran into the same problem recently on OpenSolaris, and eventually determined that
the problem is that there are Gnome and x11 packages that you need to make this run, and they're not
installed in OpenSolaris by default. I was able to make the Freeway app build and run after I installed
the following packages from the OpenSolaris package repository:
SUNWgnome-common-devel
SUNWxinc
SUNWxorg-headers
The first clue was a message about pkg-config not being found, which occurred before the error
"FreewayWindow.h", line 46: Error: Could not open include file<gtk/gtk.h>.
I looked for pkg-config in the repository and found it was in SUNWgnome-common-devel and installed that.
With each package install, the build got a little further until it tripped on something else that
was missing, and I searched for the missing filename in the repository to figure out what package
it was in, and installed the pkg. Thankfully, only three iterations of this were required.
Hope this helps. Perhaps with the next release of Sun Studio, the README for this sample app
can tell you to make sure these packages are installed.

Trying to load the sample plugin snippetRunner but it's not getting loaded

I tried to load the sample pluggin SniipetRunner and open Indesign.
Indesign opened successfully and is showing other plug-ins in the plug-in drop down but now SnippetRunner
any idea?

I had the same problem. The SnippetRunner can be found under "Window" in the top menu bar. A screenshot can be seen here: http://stackoverflow.com/questions/23214516/indesign-sdk-sample-plugin-not-working/2323971 5#23239715

Flex Builder 3 Eclipse Plugin

Flex Builder 3 Eclipse Pluginのダウンロードができません。サポートが終了したのでしょか？

I'm not quite sure what has gone wrong here, but can you
please try launching with the "-clean" command line option? E.g.
from the command line:
eclipse -clean
or
flexbuilder -clean
Some background, in case it helps: Although I don't know why
this has happened, it appears that a DLL is missing. Almost all of
Flex Builder is written in Java, but there are a few bits of native
code. In your "plugins" directory (e.g. "C:\Program
Files\Adobe\Flex Builder 3\plugins", or ""C:\Program
Files\Adobe\Flex Builder 3 Plug-in\eclipse\plugins", something like
that) should be either a file or a directory called
com.adobe.flexbuilder.utils.osnative_3.0.*.jar (where "*" is a
six-digit number). Inside that jar file, among other things, should
be a file called os/win32/x86/JNIToNativeBridge.dll. Please note,
there are two plugins with similar names:
com.adobe.flexbuilder.utils.osnative, and
com.adobe.flexbuilder.utils.osnative.win. The one I am referring to
here is the one that does *not* have "win" in the name.
Eclipse caches lots of stuff; one thing it does is, if it
finds a DLL in a plugin, it sometimes copies that DLL to another
place, called the configuration directory. The "-clean" option
tells Eclipse to discard its cache.
Please let me know whether this resolves the problem.

Building /deploying sample plugin in WLI 2.1 and WLS 6.1

Similar Messages

Maybe you are looking for