Building Facebook apps in Flash CS3?

Hi all,
Can Facebook apps be written in Flash CS3 or do I have to use Flex? I'm more comfortable with Flash, but it seems geared toward Flex.
One of the Facebook SDK examples (FriendsList_flash) contains an FLA file but it won't load in Flash CS3. Does it require a new version or am I doing something wrong?
Thanks in advance,
Barry

Hello Friends,
Can anyone give me some code hints of how to connect facebook from Flash cs3. I have installed the Flash component file "Facebook_library_v3.4_flash". But its documentation is too bad and has no code hints.
Arindam Mojumder
Visit My Flickr
Visit My Facebook
Visit My Twitter Account
Visit My Gblogger
Visit My Wordpress Blog

Similar Messages

Build iOS app with Flash Builder Burrito.

I have some Android apps built with Flash Builder Burrito that I want to deploy on iOS.
Can it work?
How?
Is the folowing working ? StageOrientationEvent and StageWebView Class
Best regards,
mark

Solved it. Just added the following in the <InfoAdditions> tag for iPhone in my app descriptor XML file:
<key>UIRequiredDeviceCapabilities</key>
<array>
<string>wifi</string>
<string>armv6</string>
<string>armv7</string>
</array>

Is there a way to build an App with CS5.5 that can run in older iPods

Hello
Does anybody know if there is a way to build an app with flash CS5.5 that can run in older iPods?, just like with CS5?
Each IPA I build with CS5.5 cannot be installed in my iPod 8GB with iOS 4.2 and before with CS5 I could install all the IPAs there and test.
The lack of support to iPod 8GB would be limitating for the market and sales...
Is there some setting to build IPA to older iPods?
Thanks

AIR 2.7 release notes:
AIR runs on "iPodTouch 4th generation iPhone 3GS and iPhone 4iPad".
But:
AIR 2.7 runs on iPod Touch 3rd Generation, too - but only on the 32GB and 64GB models. The 8GB model is in fact only an older 2nd gen iPod Touch.
We tested this and we even have some apps in the app store running on the iPod Touch 3rd gen.
I posted about this, look here:
http://forums.adobe.com/thread/892541?tstart=0

Developing iOS apps with Flash Guide.

Hello,
Does anybody know any good guide or tutorial for build iOS apps in flash?
I had done an application which is in "Waiting for review", but I made it lineal, without packages or clases, because I don't know them, so i used pure ActionScript in a single FLA.
I don't know what people can say when they mention AIR ... I don't have that? (or I do)?)
I need to make an app that is basically a book, so I need smooth paging and scrolling technique
Sorry if it's too much, any help will be apreciatte
Best Regards

See Xcode Versions ~ iOS - As of 4.29.12

AIR Intrinsic Classes-Tried and Proven Approach to building AIR applications in the Flash CS3 IDE

Hi everyone,
For all of you out there who would like to develop AIR
applications
from the Flash CS3 IDE but aren't sure how to get those pesky
intrinsic
classes working, I have a technique that you can work with to
create
your classes and make fully functional AIR applications.
First of all, those solutions out there that list
"intrinsic" functions
in their class definitions won't work. That keyword has been
taken out
and simply won't work. The "native" keyword also doesn't work
because
Flash will reject it. The solution is to do dynamic name
resolution at
runtime to get all the classes you need.
Here's a sample class that returns references to the "File",
"FileStream", and "FileMode" classes:
package com.adobe{
import flash.utils.*;
import flash.display.*;
public class AIR extends MovieClip {
public static function get File():Class {
try {
var classRef:*=getDefinitionByName('flash.filesystem.File');
} catch (err:ReferenceError) {
return (null);
}//catch
return (classRef);
}//get File
public static function get FileMode():Class {
try {
var
classRef:*=getDefinitionByName('flash.filesystem.FileMode');
} catch (err:ReferenceError) {
return (null);
}//catch
return (classRef);
}//get FileMode
public static function get FileStream():Class {
try {
var
classRef:*=getDefinitionByName('flash.filesystem.FileStream');
} catch (err:ReferenceError) {
return (null);
}//catch
return (classRef);
}//get FileStream
}//AIR class
}//com.adobe package
I've defined the package as com.adobe but you can call it
whatever you
like. You do, however, need to import "flash.utils.*" because
this
package contains the "getDefinitionByName" method. Here I'm
also
extending the MovieClip class so that I can use the extending
class
(shown next) as the main Document class in the Flash IDE.
Again, this is
entirely up to you. If you have another type of class that
will extend
this one, you can have this one extend Sprite, Math, or
whatever else
you need (or nothing if it's all the same to you).
Now, in the extending class, the Document class of the FLA,
here's the
class that extends and uses it:
package {
import com.adobe.AIR;
public class airtest extends AIR{
public function airtest() {
var field:TextField=new TextField();
field.autoSize='left';
this.addChild(field);
field.text="Fileobject="+File;
}//constructor
}//airtest class
}//package
Here I'm just showing that the class actually exists but not
doing much
with it.
If you run this in the Flash IDE, the text field will show
"File
object=null". This is because in the IDE, there really is no
File
object, it only exists when the SWF is running within the
Integrated
Runtime. However, when you run the SWF as an AIR application
(using the
adl.exe utility that comes with the SDK, for example), the
text field
will now show: "File object=[object File]". Using this
reference, you
can use all of the File methods directly (have a look here
for all of
them:
http://livedocs.adobe.com/labs/flex/3/langref/flash/filesystem/File.html).
For example, you can call:
var appResource:File=File.applicationResourceDirectory;
This particular method is static so you don't need an
instance. If you
do (such as when Flash tells you the property isn't static),
simply
create an instance like this:
var fileInstace:File=new File();
fileInstance.someMethod('abc'); //just an example...read the
reference
for actual function calls
Because the getter function in the AIR class returns a Class
reference,
it allows you to perform all of these actions directly as
though the
File class is part of the built in class structure (which in
the
runtime, it is!).
Using this technique, you can create references to literally
*ALL* of
the AIR classes and use them to build your AIR application.
The beauty
of this technique is its brevity. When you define the class
reference,
all of the methods and properties are automatically
associated with it
so you don't need reams of code to define each and every
item.
There's a bit more that can be done with this AIR class to
make it
friendlier and I'll be extending mine until all the AIR
classes are
available. If anyone's interested, feel free to drop me a
line or drop
by my site at
http://www.baynewmedia.com
where I'll be posting the
completed class. I may also make it into a component if
there's enough
interest. To all of you who knew all this already, I hope I
didn't waste
your time.
Happy coding,
Patrick

Wow, you're right. The content simply doesn't show up at all.
No
JavaScript or HTML parsing errors, apparently. But no IE7
content.
I'll definitely have to look into that. In the meantime, try
FireFox :)
I'm trying to develop a panel to output AIR applications from
within the
Flash IDE. GSkinner has one but I haven't been able to get it
to work
successfully. Mine has exported an AIR app already so that's
a step in
the right direction but JSFL is a tricky beast, especially
when trying
to integrate it using MMExecute strings.
But, if you can, create AIR applications by hand. I haven't
yet seen an
application that allows you to change every single option
like you can
when you update the application.xml file yourself. Also, it's
a great
fallback skill to have.
Let me know if you need some assistance with AIR exports.
Once you've
done it a couple of times, it becomes pretty straightforward.
Patrick
GWD wrote:
> P.S. I've clicked on your link a few times over the last
couple of days to
> check it out but all I get is a black page with a BNM
flash header and no way
> to navigate to any content. Using IE7 if that's any
help.
>
>
>
http://www.baynewmedia.com
Faster, easier, better...ActionScript development taken to
new heights.
Download the BNMAPI today. You'll wonder how you ever did
without it!
Available for ActionScript 2.0/3.0.

Flash CS3 fl.* package cannot be used in Flex Builder 3

Hi,
I was very disappointed to find out that one cannot import
the fl.* package, which is available for flash CS3. I found a work
around by creating swc file and importing them, however it's
disappointing that flash CS3 would have such a major advantage over
Flex Builder 3 when building an Action Script 3.0 Application.
Best, E

I've looked over that sample.
Part of the problem is that I don't have access to
mx.effects. I think this is because that example is a Flex 3
Project and has a MXML file attributed to it. I opened a Flex 3
project and was able to access mx.effects - but my project is
different in that it's an ActionScript project - meaning, I opened
an ActionScript project in Flex Builder 3. Apperantly the
ActionScript projects don't have access to mx.effects.Tween. And
niether do they have access to fl.transitions.Tween. It's strange -
and I'm trying to find a way to access them by connecting the build
path to the Tween classes somehow.
My project preferences already have the fl.* folders in the
build path. It just still doesn't seem to work.

How do you build an image gallery in Flash CS3 actionscript3?

I am building my entire website in flash cs3, actionscript3
but I really need help building an image gallery. What I need is a
horizontal scroll bar that contains thumbs within it and then loads
the full size image right above the scroll bar. Anyone has any
suggestions for books, tutorials or even safe places to purchase
the fla that I can customize it?

if you want help understanding as3 check:
http://www.senocular.com/flash/tutorials/as3withflashcs3/
if you want to purchase a custom fla that does exactly what
you want send me an email via my website.

Problems with Dashboard Demo App in Flash Builder 4

I imported the Adobe Flex Dashboard app into Flash Builder 4 using SD 4.1 and selected "Use Flex 3 compatibility mode", but there are still some issues after import.
I'm not talking about having to create the "libs" folder and re-generate the HTML templates. I know why that needs to be done. I'm also not talking about the IStroke and IFill errors you get for the number of arguments to the apply() and begin() methods, as those interfaces changed in Flex 3.5.
But when I get the app launched, the chart datatips are just a black rectangle (no text) and the combobox entry text is invisible.
I'm going to try and fix these, but I thought selecting "Use Flex 3 compatibility mode" meant no changed required?

Here is a simple example. Create a new project in Flash Builder 4 and in the project properties compiler section, select "Use Flex 3 compatibility mode". Then launch the app, hover over a column in the chart and you see black rectangles, not data tips. Why is this and how to fix?
<?xml version="1.0" encoding="utf-8"?>
<mx:Application
xmlns:mx="http://www.adobe.com/2006/mxml"
creationComplete="srv.send()"
height="600">
<mx:HTTPService id="srv"
    url="http://aspexamples.adobe.com/chart_examples/expenses-xml.aspx"/>
<mx:ComboBox dataProvider="{srv.lastResult.data.result}" labelField="month"/>
<mx:Panel title="Column Chart">
    <mx:ColumnChart id="myChart" showDataTips="true"
      dataProvider="{srv.lastResult.data.result}">
      <mx:horizontalAxis>
        <mx:CategoryAxis categoryField="month"/>
      </mx:horizontalAxis>
      <mx:series>
        <mx:ColumnSeries xField="month" yField="profit"
          displayName="Profit"/>
        <mx:ColumnSeries xField="month" yField="expenses"
          displayName="Expenses"/>
      </mx:series>
    </mx:ColumnChart>
    <mx:Legend dataProvider="{myChart}"/>
</mx:Panel>
</mx:Application>

How to build a custom Flash CS3 component

I just googled in the hope to find some resources about how
to build custom Flash CS3 components, but nothing turned up. I also
couldn't find any info on Adobe's Flash developers center.
Do you know of any resource that sheds some light on this
subject?
If not then I'll have to try to find my way around custom
components by learning from the ones that came with Flash CS3 I
guess.

Flash CS3 has been out for a few weeks. At this point, your
best bet is Amazon books or Barnes & Noble. I've read a few
books that should shed light on the subject. Otherwise, you'll need
to wait a few more weeks while people start hashing it out and
posting it to blogs and other sites.

Flash CS3 vs. Flex Builder 2

Here's the $64,000 question: should we be developing in Flash
CS3 or should we shift over to Flex Builder 2? I maintain that AS
3.0 is a pain in the proverbial, but I've been researching and
finding as much help as possible online about it, and I've found
that by and large people are using Flex Builder 2 as the basis of
tutorials about AS 3.0. Does anyone have an official slant on this
question? Should we abandon Flash for Flex? Will it help? Will it
mitigate the difficulties non-programmers are experiencing with AS
3.0 - or as I call it simply ***? Would I be getting more responses
to my *** questions if I post them over in the *** forum under Flex
Builder?
Any thoughts on this matter would be most welcome, thank
you.

Beatie3,
>> Help please.
Sorry about that ... some days are crazier than others. :-/
[From an earlier reply ...]
> Thank you very much, that's exactly the sort of answer I
> needed. Hmmm, cheque's in the mail. ;)
Heh, good on ya! :)
> I'm definitely a 'deseloper' and will stick with Flash.
I wish
> I had the luxury of only dipping into AS3.
I don't know that I'd call it a luxury, really. Work is
work. ;) As
you might imagine, though, Flex Builder 2 provides a number
of scripting
improvements over the Actions panel (there's really no
comparison; if you've
tried them both, the Actions panel barely feels useful) and
the Flex
framework offers significantly more UI Components. Ideally,
if the pocket
book allows it, using both applications is the killer setup.
> My problem is that I built a little program that draws
scale bars
> on uploaded images that can then be printed. It did
everything
> it needed to, but in AS2.0 you can't control the quality
of the
> imported jpgs.
When you say imported, you mean dynamically loaded (loaded
at runtime),
right? Otherwise, I'm confused. The Flash IDE itself allows
you to
determine the quality of imported JPGs. In ActionScript 3.0
... are you
talking about the Stage.quality property?
> I'm experimenting with Sprites and I have something
appearing
> as the line is drawn but I can't crack the new way to
express
> coordinates.
Not sure what might be tripping you up, actually. The
coordinate grid
is the same. Horizontally, higher numbers move toward the
right;
vertically, higher numbers move toward the bottom. That's the
same as it's
been.
> I just want a blue hair line with a nice green dot at
each end
> that can be seen while the line is drawn. Once the
mouseUp
> happens the drawing guide should disappear and the black
> line appear.
Having heard what you're after, I just started a quick
experiment from
scratch. Here's my version, below. Note: I've made no effort
to optimize
my code. This is just a first draft to achieve a blue line
segment with
green dots on each end that becomes a black line segment when
the mouse
lifts.
var startX:Number;
var startY:Number;
var canvas:Sprite = new Sprite();
addChild(canvas);
canvas.stage.addEventListener(MouseEvent.MOUSE_DOWN,
mouseDownHandler);
canvas.stage.addEventListener(MouseEvent.MOUSE_UP,
mouseUpHandler);
function mouseDownHandler(evt:MouseEvent):void {
startX = mouseX;
startY = mouseY;
var dot:Sprite = new Sprite();
dot.name = "dotStart";
dot.graphics.beginFill(0x00FF00);
dot.graphics.drawCircle(mouseX, mouseY, 5);
dot.graphics.endFill();
canvas.addChild(dot);
dot = new Sprite();
dot.name = "dotEnd";
dot.graphics.beginFill(0x00FF00);
dot.graphics.drawCircle(0, 0, 5);
dot.graphics.endFill();
canvas.addChild(dot);
canvas.addEventListener(Event.ENTER_FRAME,
enterFrameHandler);
function enterFrameHandler(evt:Event):void {
var dot:DisplayObject = canvas.getChildByName("dotEnd");
dot.x = mouseX;
dot.y = mouseY;
canvas.graphics.clear();
canvas.graphics.lineStyle(1, 0x0000FF);
canvas.graphics.moveTo(startX, startY);
canvas.graphics.lineTo(mouseX, mouseY);
function mouseUpHandler(evt:MouseEvent):void {
canvas.removeEventListener(Event.ENTER_FRAME,
enterFrameHandler);
canvas.removeChild(canvas.getChildByName("dotStart"));
canvas.removeChild(canvas.getChildByName("dotEnd"));
canvas.graphics.clear();
canvas.graphics.lineStyle(2, 0x000000);
canvas.graphics.moveTo(startX, startY);
canvas.graphics.lineTo(mouseX, mouseY);
There's a lot of repeated code there, and this isn't how I'd
leave the
above in an actual project, but by spilling out a rough cut
like this, I'm
hoping it gives you something to work with -- showing the
mechanics of how
this might be done.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

Comunication and events: Flex Builder 2 with Flash CS3

Hey hello...well, my question is: how can i comunicate Flex
Builder 2 with Flash CS3?
this is my code on Flex Builder 2:
<mx:Script>
<![CDATA[
import mx.controls.*;
import mx.events.*;
public function CargaCompleta(e:Event):void
try
e.target.content.objeto_salida.addEventListener(Event.COMPLETE,uno);
catch(er:Error) { Alert.show(er.message,"Error"); }
public function uno(e:Event):void
try
s1.content["objeto_salida"].removeEventListener(MouseEvent.CLICK,s1.content["Finaliza"]);
s1.source = null;
s1.source = "recursos/reactivos/208M-1R.swf";
catch(er:Error) { Alert.show(er.message,"Error"); }
]]>
</mx:Script>
<mx:SWFLoader id="s1" width="278" height="251"
complete="CargaCompleta(event)"
source="recursos/interactivos/208M-1I.swf">
</mx:SWFLoader>
and when it change from one file to another, on the event
"Complete" for the SWFLodar, an error happend
TypeError: Error #1009: No se puede acceder a una propiedad o
a un método de una referencia a un objeto nulo.
at 208M_fla::MainTimeline/frame1()
Hope somebody can help me...for your time thanks...

"Jorge EdOardo" <[email protected]> wrote in
message
news:gfcfcr$9s2$[email protected]..
> Hey hello...well, my question is: how can i comunicate
Flex Builder 2 with
> Flash CS3?
>
> this is my code on Flex Builder 2:
> <mx:Script>
> <![CDATA[
> import mx.controls.*;
> import mx.events.*;
> public function CargaCompleta(e:Event):void
> {
> try
> {
>
e.target.content.objeto_salida.addEventListener(Event.COMPLETE,uno);
> }
> catch(er:Error) { Alert.show(er.message,"Error"); }
> }
> public function uno(e:Event):void
> {
> try
> {
>
>
s1.content["objeto_salida"].removeEventListener(MouseEvent.CLICK,s1.content["Fin
> aliza"]);
> s1.source = null;
> s1.source = "recursos/reactivos/208M-1R.swf";
> }
> catch(er:Error) { Alert.show(er.message,"Error"); }
> }
> ]]>
> </mx:Script>
> <mx:SWFLoader id="s1" width="278" height="251"
> complete="CargaCompleta(event)"
> source="recursos/interactivos/208M-1I.swf">
> </mx:SWFLoader>
>
> and when it change from one file to another, on the
event "Complete" for
> the
> SWFLodar, an error happend
>
> TypeError: Error #1009: No se puede acceder a una
propiedad o a un m?todo
> de
> una referencia a un objeto nulo.
> at 208M_fla::MainTimeline/frame1()
>
> Hope somebody can help me...for your time thanks...
http://weblogs.macromedia.com/pent/archives/2007/04/using_actionscr_1.html

Getting Flash CS3/CS4 AIR1.0 app to work in Flash CS5

This is a question in regards to Flash CS5 but since it's specific to AIR I'm posting here.
I have a Flash CS3 AIR 1.0 project and I can't get it to compile in Flash CS5. If I recall I installed some extension for Flash CS3 to be able to create AIR apps. It was an Adobe extension.
The app involves two SWFs. The first is the main app, Main.fla, the second is a window panel template, Panel.fla. The Main app would compile and include the Panel.swf which it would instantiate and load into new windows to create a paneled app.
I was able to open Main.fla and publish in CS5 with no problems. The profile even says AIR 1.0 in the properties panel, although when I click edit it shows AIR 2.0 selected in the dropdown, and there is no option for another version of AIR -- which version of AIR is actually being created? Not important as long as it work...
The Panel.fla on the other hand I cannot get to compile. The profile still says AIR 1.0 in properties but the dropdown in the publish settings says Flash Player 9, and when I compile it breaks on any AIR references, for instance:
1119: Access of possibly undefined property nativeWindow through a reference with static type flash.display:Stage.
I have this classpath:
$(AppConfig)/ActionScript 3.0 AIR 1.0/Classes
But apparently that is no longer good. I've looked in all the Flash CS5 directories I could find and there is no such dir.
The issue here is that Panel.fla is NOT an AIR app, it's a SWF which runs in an AIR app. How should get this working?

I changed the profile of both to AIR2.0, and it still shows AIR1.0 in the properties panel. I'm able to publish the Panel.swf now but it also generates an unwanted panel-app.xml -- unwanted because panel is not an app, it's merely a SWF to run inside the main app.
Is there a better way? And why does it still say AIR1.0 in the properties panel?

Developing Iphone App using Flash Builder and Flex Air Mobile

I started developing an Iphone app using the trial version of Flash Builder and was pretty impressed with how easy it was, then i hit problems:
Trying to submit my app, I was getting invalid binary, using google i tracked this down to a change in the Apple App Store meaning that all apps needed to have native iphone 5 support, which meant updating to Air SDK 3.7
Updating to AIR SDK 3.7 was a nightmare (mainly as a result of my failure to read the small print)
Once I got SDK 3.7 to work with flash builder / flex mobile i though i was there.
However now i can produce a fast build but everytime i try and produce a standard / production build i get strange errors (air 3.8 does the same).
My Question is - before i actually buy Flash Builder has anybody actually achieved the following:
     Building an Iphone App using:
     Flash Builder 4.7    (running on OSX)
     Flex Mobile 4.6
     Air 3.7
If so how ?
cheers
Toby

Thanks for your reply, its nice to know its not just me.
the error i got when submitting to the App store where due to native support for IPHONE 5 which is now mandatory (from May 1st), looking around the internet the common soloution seemed to be upgrading to Air 3.7.
The strange erorrs on 3.7 revolve around compiling a standard / production build (fast build works fine)
the error is always the same (snippet shown below):
Error occurred while packaging the application:
Undefined symbols for architecture armv7:
"__ZN7avmplus8Debugger9debugLineEi", referenced from:
      __ZN7avmplus9MethodEnv9debugExitEPNS_13CallStackNodeE in AOTBuildOutput-4.o
      __ZN7avmplus11BaseExecMgr22debugEnterExitWrapperNEPNS_9MethodEnvEiPj in AOTBuildOutput-4.o
I have completly failed to work out why, but my gut feeling is its something to do with how the mac is compiling the code in standard build and unable to find a library it needs.
cheers
Toby

Transition from my firefox extension to a Flash Builder desktop app

Trying to make a slow transistion from my firefox extension to a Flash Builder desktop app.
Okay i'm not familiar on how to go about this I have js code that lets my app sync it self with the lates build it looks for a new version number which is in a txt file. Inside the txt file I have 0.0.0 so evertime I change the version number to 0.0.1. The app checks for new updates and sees the txt file has a new version number and start to pull in the zip file and extrudes the zip into the directory.
I can't get my head around on how to modify this code ["@mozilla.org/extensions/manager;1"].getService
to look in the root directory of my Flash Builder app.
function Xcalibur_Sync(){
    document.documentElement.getButton("accept").disabled = true;
    var Cc = Components.classes;
    var Ci = Components.interfaces;
    var url = xcaliburGetUnicharPref("extensions.xcalibur.downloadurl");
    var Step1 = document.getElementById("xcalStep1");
    var Step1done = document.getElementById("xcalStep1Done");
    var Step2 = document.getElementById("xcalStep2");
    var Step2done = document.getElementById("xcalStep2Done");
    var Step3 = document.getElementById("xcalStep3");
    var Step3done = document.getElementById("xcalStep3Done");
    var Step4 = document.getElementById("xcalStep4");
    var Step4done = document.getElementById("xcalStep4Done");
    var xcalSyncDone = document.getElementById("xcalSyncDone");
    var progressMeter = document.getElementById("xcalProgressMeter");
    var progressPct = document.getElementById("xcalProgressPct");
// Get Xcalibur version and location
    var GUID = "[email protected]"
    var gExtensionManager = Cc["@mozilla.org/extensions/manager;1"].getService(Ci.nsIExtensionManager);
//var currentVersion = gExtensionManager.getItemForID(GUID).version;
    var currentVersion = xcaliburPrefs.getCharPref("extensions.xcalibur.installedversion");
    var xcaliburdir = gExtensionManager.getInstallLocation(GUID).getItemLocation(GUID);
    var file = Cc["@mozilla.org/file/local;1"].createInstance(Ci.nsILocalFile);
    file.initWithPath(xcaliburdir.path);
    //Step 1 - See if an update is available
    Step1.setAttribute("hidden", "false");
    var req = new XMLHttpRequest();
    req.open('GET', url+"CRV.txt", false);
    try{
        req.send(null);
    }catch(e){
        alert("Cannot get update information from "+url+"CRV.txt\n"+e.toString()+"\n\nSync aborted ...");
        window.close();
        return false;
    }//try
    if(req.status == 200){
        var CRV = req.responseText;
Any Ideas?
Thanks,
Ish

Have you taken a look at the documentation on updating AIR applications?
http://help.adobe.com/en_US/AIR/1.5/devappsflex/WS5b3ccc516d4fbf351e63e3d118666ade46-7ff2. html
Or is it something else you wish to do? You can access the directory where your app is installed by looking at File.applicationDirectory and you can hit a URL by using URLRequest.
-Anirudh

The people's posted videos no longer work on my ipad Note: I am using the Facebook app, I am not using safari Please don't tell me to use adobe flash player, it is not compatible with ipad, but it used to work nevertheless.

The people's posted videos no longer work on my ipad
Note: I am using the Facebook app, I am not using safari
Please don't tell me to use adobe flash player, it is not compatible with ipad, but it used to work nevertheless.

Facebook videos are still working for me in the Facebook App (using iOS 7.0.6).
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost.

Building Facebook apps in Flash CS3?

Similar Messages

Maybe you are looking for