Building FLV Player for FMS Video and Audio

Hi All,
Am new to flash development. I would need all of your
knowledge to build an application for FLV Streaming.
I need to write a FLV player which dynamically picks the file
from FMS Server by taking the arguments password to the
movie/player.
Please let me know how do i go about it.
Thanks in Advance
Mady

arunbe,
I read the live docs information about NetStream.onMetaData,
and this tells me that it is possible that I might get some
information about an audio codec, but it doesn't really help all
that much in learning if there is a way to tell if there is an
audio track present at all. Does such a possibility exist?
C

Similar Messages

Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan Foley

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

I need to connect Lightning to RCA componet for both Video and Audio

I have an Ipad 2nd generation and use a 30 pin to RCA Componet adapter from rockfish and its work great for video and audio. I now have a IPad mini 5 gen and I bought a lightning to 30 pin adapter and tried to use my Ipad mini to watch video and audio. Audio works but video does not. Does anyone have a solution for this for the new Ipad Mini and iphone 5s.

Nope.
There is no lightning to RCA.
The 30 pin adaptor clearly states it does not support video out.

Sound for recording video and audio not working

I have tried everything to get the sound to work. I have reinstalled the audio driver. When I go to soundrecording.exe to see if I can record sound it gives me a message "An audio recording device cannot be found." Please help this is driving me crazy.

well, since people can hear you on a call, it's not a hardware problem with the microphone.
It appears to be something wrong with your recording apps -- the camera (in the case of video) and whatsapp.
First attempt would be to:
a) install another camera app with video capability and see if IT will record audio. and
b) uninstall and reinstall whatsapp to see if that fixes the problem.
If that doesn't work, to a backup, then try a hard reset and re-install the apps one by one, confirming that recording works after each install.
/drt

What's the best mouse for heavy video and audio editing?

I do an enormous of audio and video editing. I'm finally feeling the strange sensations of tightness in my right hand (being right-handed). I realize now that the typical mouse design is bad for heavy precision work. When I use my son's Mac flat mouse, I notice that my hand lies flat and somewhat rested while working.
Can anyone recommend a great flat or other mouse for my PC?

I guess it's all a matter of personal preference.
When I got my Mac, the first thing I did was replace that God-awful Mighty Mouse with a nice, generic two-button roller mouse.
They all work about the same. I guess it's mostly about your personal ergonomic comfort.

Bandwidth Shaping for limiting Video and Audio Streaming

Hi,
How do I setup this on the SRP527W?
I already block most of the video stuff on the internet.
But I want to make this one more step.
Thanks
Best Regards,
Mr. Simon Yee
Document Control
Budi Feed Sdn. Bhd.(827186-P)
Lot 11940, Jalan Perajurit 1,
Off Jalan Perajurit,
Kampung Tengah,
Telok Gong,
42000 Port Klang,
Selangor Darul Ehsan.
Tel :-- 603-3134 1081
Notice of Confidentiality:
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender immediately by return electronic transmission and then immediately delete this transmission, including all attachments, without copying, distributing or disclosing same.

Hello Mr Yee,
I found a link from the cisco site where you could find the configuration steps for Traffic Shaping.
http://www.cisco.com/en/US/docs/ios/12_0/qos/configuration/guide/qcgts.html
hope you find this answer useful, if it was satisfactory for you, please mark the question as Answered.
Thank you

Where do I find instructions for Youtube Video and Audio Downloader 0.3.9.1

I need "dummies" instructions for someone who does not have much computer knowledge. I managed to download one video, but not another one. I have looked on line for instructions, and cannot find any, so I don't know if I am using the addon correctly. I do not understand the things in the "conversion tool" area. What I want to do is download videos to my computer to then convert and burn them to a dvd to play on my tv. Maybe I need a different addon, but how do I choose from all the ones that are offered?

HI jcrmain24,
I would recommend trying them, or viewing the reviews of the ones you are looking at. This may help.

Is there a fix for my video and audio stopping in the middle of playing but the video timer keeps going

This happens on YouTube, Safari and Music videos. I just got my iPhone 5s a week a go and this has been a problem since day 1. My phone is not jailbroken. Let me know if there's any other relevant information that would be helpful in answering this question.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You may have switched on caret browsing.
*http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
*Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
*http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
*http://kb.mozillazine.org/Accessibility_features_of_Firefox

USB interface to composite video and audio

I've been searching a long time for a compatible, low cost and convenient capture device for composite video and audio. The EasyCap devices are super cheap, but their audio section is just horrid. Others won't provide audio usable by Adobe Connect. The EZCap 116 seems to work very well with Adobe Connect, providing a single USB cable connection that carries both audio and video. To get it to work with Skype you need to use Splitcam. the only reminaing annoyance is that you have to use the bundled software each time you want to get the device to use composite or S-video inputs. Sure wish the Flash module would let you configure webcam settings directly.
My main application for the gadget is to interface our institutional VC codecs (which have VCR outputs) to Adobe Connect users.

Studio X: Doh!, you beat me, with your maximally cryptic reply!

I have quicktime player 7.7.2. A relative video clips from his phone. Previously they downloaded with both video and audio. As of Sept. 30 only the audio downloads, yet Quicktime still plays older saved video/audio clips. Help?

I have Quicktime Player 7.7.2. A relative has been sending video clips from his phone since June, and until Sept. 30 both the video and audio would download. SInce that date only the audio downloads, yet I can still open and play the older saved videos just fine. I tried looking at QuickTime help info available. One place said something about purchasing Quick Pro for use with 7.7.2, but if I need that, why can I still open older saved videos? Thanks for any help.

I'm adding more information:
in Finder, my iMovie folders are all visible and accessible. When I click on a clip from iMovie Events folder, Quicktime opens and plays the clip. ALL my video is not missing - it just isn't showing up in the Event Library!
This happened all of a sudden, while I was working on iMovie project (on both computers).
All my Projects are intact, and play when I open them.

TS3623 I rented a movie and can watch preview perfectly with video and audio feed as signal strength is at top when I checked. However, when I purchased rental video is fine , but I get scratched sound for audio. Any thoughts to fix?

I rented a movie and can watch preview perfectly with video and audio feed as signal strength is at highest when I checked. However, when I purchased rental video is fine , but I get scratched sound for audio. Any thoughts to fix? I rented movie within week and it worked. All previews of movies and show also works.

I have a suspicion that the problem is not in the recording device itelf, but rather in the playback-software, which is struggling with an unfamiliar audio format/codec/whatever-it's-called... I opened the file in QuickTime Player 7 (7.6.6) and selected "Show Movie Properties" and it says:
"Video Track: H.264
Sound Track: Integer (Little Endian)"
All current Mac systems support Integer (both Big and Little Endian) audio natively. The fact you can hear anything at all proves that the audio is playing back. The most likely problem would be a malfunction associated with the mic pickup.

Embedding video and audio for internet flipbook

Dear All,
first of all, sorry if it's been asked before but I could not find direct answer.
My company, small translation agency in Poland, plans on to buy InDesign to improve quality of our output documents, but we have one more feature in mind and we don't know if InDesign CS6 supports this.
In a movie http://tv.adobe.com/watch/cs55-design-standard-feature-tour/create-more-compelling-ebooks- with-indesign-cs55/ Terry White presents how to make an eBook with embedded video. We need a solution to create a similar effect, but the final document would be accessible from WWW (eg. http://essentialabsurdities.com/dance/ - there is no video in the example) - we want people to be able to browse content like in a book (flipbook?) and access video and audio (embedded or stored on a serwer along the document) when needed.
Does InDesign support this? What should be the final format of such a document? Interactive PDF? SWF? Everybody says Flash is going to be retired soon (Apple does not support it, Android devices are soon to follow, the same for PCs in the nearest future probably) so we do not want to use this.
Many thanks for your opinions on the issue.
Best wishes,
Michal Kornacki

I have no incoming video for my Jabber account. I was doing some testing for one of my customers who had this issue. Here is what I found. I have a EX90 registered to VCS on a corporate network. I have my Jabber Express client I downloaded and installed. When I call to or from either I don't receive video on Jabber Express but I get audio from the EX90. I get Audio and video on the EX90 from Jabber. What I found when I was troubleshooting is that if you leave the call up for 30 seconds I finally start recieving video on Jabber from the EX90. After testing a few calls this happened every time. I then checked the call settings on both sides during the call. Both endpoints are experiencing 50% or so packet loss until the video started being sent to Jabber and then the packet loss dropped to 0. So I would assume there is something wrong on the Jabber Express end that is causing a 30 second or so delay when the video is being sent through the proxy. Has anyone else had this exact issue?

Video and audio formats for iPad

Hey, guys.. I've tried searching this up in the forum but didn't have any luck with that..
I can't seem to upload my movies and songs into iPad... I tried converting my movie into .mov and .mp4. They can both be imported into my iTunes library but when I drag it to the iPad tab it says it cannot be copied because it cannot be played on the iPad. And some of my albums just can't be imported.
May I know the preferred format for my movies and my songs? And what could be the problem with my importing..
Thanks heaps.

Here are the spec for video and audio for the iPad:
H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

What should be the quality of video and audio for bandwidth 768KB

Hello Friends
We are provoding 768kB bandwidth for our connection. Can any body tell us what should be the quality of video and audio we can set that does not effect frame rate which is 24 FPS.
thanks in advance.

Hi Samir
You could try out the bitrate calculator at http://www.adobe.com/devnet/flash/apps/flv_bitrate_calculator/ . It lets you try various encoding settings to see what fits best for the bandwidth available to you.
Regards
Mamata

I am not able to download mp4 files (video and audio) to iTunes since I updated to iTunes 11. Thanks for your help.

I am not able to download mp4 files (video and audio) to iTunes since I updated to iTunes 11. Thanks for your help.

Thank you for clarifying. Your question is in your browser, not in iTunes. Each download link is different, and it has nothing to do with the File menu. You can save media files by secondary-clicking on the link to the media file and selecting Save File to "[your downloads folder".

Building FLV Player for FMS Video and Audio

Similar Messages

Maybe you are looking for