Building multiple outcomes with CS6

So I build a website 960 pixels wide, 1080 tall. Mash it through Mobile and APP? Whoa. Sounds like fun! Who's done it?

Hi there
First off, even though we are at version 6 of Captivate, it has never been part of the Creative Suite. So it's technically incorrect to call it "CS6". In fact, if that's all you said about it without providing other info that helps us identify that it's Captivate, we would likely tell you, sorry, but the CS forums are this way.
As for the ActiveX message. There are essentially two ways to "fix" it.
Add the mark of the web to the page
Adjust the browser settings to "Allow active content to run on pages".
Likely, you think your end users will encounter the same message, no? But I need to point out that this only affects things when running the Captivate content from the local file system. The moment you copy the Captivate content to a web browser and your user views it that way, the issue resolves and they will never see the message. YOU see it because you are the captivate author and testing by playing from your local file system before deploying to the server.
I do believe you are spot on with your assessment of the JavaScript message.
Sorry, I'm not a "Quiz" person. So I'm not equipped to coherently answer or guide you with what to do on the Quiz issue.
I am unaware of any way to control the size of the TOC to make it smaller. However, you may configure an Overlay TOC by clicking the Settings... button in the lower left corner of the dialog. Using an overlay will keep the TOC hidden until desired. When desired, the little icon is clicked and the TOC slides into view. Perhaps that will help?
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Similar Messages

How to build a form with multiple tables in oracle application express

Hi everyone,
I have got problem in building a form with multiple tables.I have a main table with (20) columns and this main table is related to the other tables with the primary key-foreign key relation ship.My requirement is i have to build a form which has fields from many tables and all the fields are related to the main table using (ID) column.In that form if i enter ID field i have to get information from differnt tables.
Please help me to solve this (building a form with mutiple tables)
Thank you
sans

Sans,
I am no Apex expert, but with a situation as "complex" as yours, have you thought about creating a VIEW that joins these 7/8 tables, placing an INSTEAD OF trigger on that view to do all the business logic in the database, and base your application on the view?
This is the "thick-database" approach that has been gaining momentum of late. The idea is to put your business logic in the database wherever possible, and let the application (Form, Apex, J2EE, whatever) concentrate on UI issues,

ORACLE EXPRESS: build a page with multiple forms linked to one table

hi,
im using oravle application express. APEX
i would like to build a page with multiple forms linked to one table (orders) , the page has 4 from each one with different order_id number (depending on filtering), and if the order is prepared click yes for each order and this 'YES' should be UPDATED AND SAVED to each order number in the same table with the press of one button.
i created all the form as (sql query)
and create one update process
(UPDATE ORDERS
SET TRAY_PREPARED =:P10_TRAY_PREPARED_1
WHERE ORDER_ID =:P10_ORDER_ID_1;
UPDATE ORDERS
SET TRAY_PREPARED =:P10_TRAY_PREPARED_2
WHERE ORDER_ID =:P10_ORDER_ID_2;
UPDATE ORDERS
SET TRAY_PREPARED =:P10_TRAY_PREPARED_3
WHERE ORDER_ID =:P10_ORDER_ID_3;
UPDATE ORDERS
SET TRAY_PREPARED =:P10_TRAY_PREPARED_4
WHERE ORDER_ID =:P10_ORDER_ID_4;
i dont know really if i can do that, but it appear hat it actually saving according to order_id number , but not all the time some time it saved the value as "null".
please guide me what is the correct way to do this.
I READ THIS ONE
http://stackoverflow.com/questions/7877396/apex-creating-a-page-with-multiple-forms-linked-to-multiple-related-tables
BUT IT WAS FOR MULTIPLE INSERT
thanks.

Sans,
I am no Apex expert, but with a situation as "complex" as yours, have you thought about creating a VIEW that joins these 7/8 tables, placing an INSTEAD OF trigger on that view to do all the business logic in the database, and base your application on the view?
This is the "thick-database" approach that has been gaining momentum of late. The idea is to put your business logic in the database wherever possible, and let the application (Form, Apex, J2EE, whatever) concentrate on UI issues,

Building multiple EXE's with common code

I’m trying to determine the best way to use Application Builder to deploy a fairly large LabVIEW project to computers which do not have a LabVIEW development system installed. This project consists of:
Multiple top-level VI’s, each of which should be compiled to a separate executables.
Multiple plug-in classes which are dynamically loaded by the top-level VI’s.
Common modules (LabVIEW classes, project libraries, and individual VI’s) shared by both the top-level VI’s and the plug-in classes.
Everything works well under the development system, and also when I use a single build specification to both build the EXE for one top-level VI and to place the plug-in classes in the correct folder relative to the EXE. However, this seems wasteful, as it makes a full copy of all of the plug-in classes, and their dependencies for each top level EXE.
If I try to build the EXE with one build specification, and a source distribution for the plug-in classes with another build specification, error 1448 occurs when I load some of the plug-in classes using “Get LV Class Default Value.vi”. I suspect that this is due to having the same common VI expected at two different paths (i.e. one embedded in the EXE and a second copy in the folder where the plug-in class is located).
Is there any way to use multiple build specifications to build several EXE’s and a “library” of common code in such a way that everything links properly?
Mark Moss
Electrical Validation Engineer
GHSP

It is possible, but I will save you the trouble - if it works as a monolithic executable, leave it at that. It may be wasteful, but computers are powerful, memory is cheap and headaches resulting from trying to manage dependencies aren't.
If you want, you can find some plugin schemes in the large apps group over at the communities area of this site, but you're probably better off not going into it if you don't actually need the functionality.
Try to take over the world!

Multiple devices with the same GUID

Hi,
According to the Zenworks Command line utilities reference https://www.novell.com/documentation...a/bb15p2z.html
There exists an option to register a device with a new GUID by doing the following...
register (reg) [-g] [-k <key>] [-u <username> -p <password] <ZENworks Server addressort>
Registers the device in a Management Zone.
You can use the following options:
g - Lets you create a new device object with a new GUID and password for the device if you have multiple devices with the same GUID. When you register a device by using this switch, all the associations (policies and bundles) assigned to the original device object are removed. You cannot use this option to create a new GUID for a Primary Server or a Satellite device. The local user must have Local Administrator rights to use this option.
I would like to know if it is possible to have such a command line option for the agent installation. So built into the agent installer, a command line option to force the agent to register with a new GUID.
We are having CONTINUOUS problems with the above scenario. When we move devices from one computer lab to another and re-image the device, Zenworks keps trying to assign the same GUID to the device and this mixes up our Dynamic Workstation groups, which then affect the applicable policies to each device.
I would like to know if there is an option to tell the installer to stop remembering the GUID and simply register the device with a new guid on agent installation.
This way we can build that into the post imaging scripts which install the zenworks agent.

Hi Craig,
OK, I've had a look at the ZCM Reconcile rules and run a few tests to see if it is possible to get the machines not to reconcile (use a new GUID after imaging).
As I have explained before, sometimes this result is desired in our case especially when we move machines around from lab to lab.
So far, no matter what configuration I use, I cannot get Zenworks to generate a new GUID for a device that is getting re-imaged (without doing so only after the fact by unregistering the machine and reregistering the machine via the zac und and zac reg -g).
We use dynamic workstation groups to assign policies and bundles to machines so reconciling the devices is not necessary most of the time. We need an option to tell the machine to register with a new GUID on installation of the agent. Surely such an option can be built into the agent installer?
The options in the ZCM config management "reconcile settings" I tested with are:
Serial Number - Unticked/Unselected
Mac Address - Unticked/Unselected
Machine Name - Unticked/Unselected
Enable Differentiation - Unticked/Unselected
I then also tested:
Serial Number - Unticked/Unselected
Mac Address - Unticked/Unselected
Machine Name - Ticked/Selected
Enable Differentation - Ticked/Selected
and also:
Serial Number - Unticked/Unselected
Mac Address - Unticked/Unselected
Machine Name - Ticked/Selected
Enable Differentation - Unticked/Unselected
With all three different configurations, I re-imaged the same machine, which renames the machine via the first post imaging installation script to match the DNS name. Thereafter the Zenworks agent gets installed, which then renames the machine back to what it was registered into the Zenworks database with on first installation.
We need a method of telling Zenworks NOT to reconcile when we want it to. It should not reconcile every time and thereby rename the machine netBIOS name.
Is there any way to achieve this?
Originally Posted by CRAIGDWILSON
Quite Simple,
Let's say a HDD Dies and you replace it.
All you need to do is bring down an image and the machine will come back as it was with all the same WS and Device associations.
The same thing could apply if bringing in new Hardware.
If a new computer were to replace an old computer but the name stayed the same, everything could be automatic depending on the rules setup.
It is all a matter of how you tell ZCM to reconcile devices.
The Help in the ZCC under these items should explain how it works so you can setup your rules to meet your use cases.

Multiple queries with 1 connection

Can I execute multiple queries with one connection?
//Example -
<%
String firstconn;
Class.forName("org.gjt.mm.mysql.Driver");
// create connection string
firstconn = "jdbc:mysql://localhost/profile?user=mark&password=mstringham";
// pass database parameters to JDBC driver
Connection aConn = DriverManager.getConnection(firstconn);
// query statement
Statement firstSQLStatement = aConn.createStatement();
String firstquery = "UPDATE auth_users SET last_log='" + rightnow + "'WHERE name='" + username + "' ";
// get result code
int firstSQLStatus = firstSQLStatement.executeUpdate(firstquery);
// close connection
firstSQLStatement.close();
%>
Now, instead of building a new connection for each query, can I use the same connection info for another query?
if so - how do you do this?
thanks for any help.
Mark

Create multiple statement objects from your connection. It's a good idea to close these in a finally block after you're done with them
Connection conn = null;
Statement stmt1 = null;
Statement stmt2 = null;
try {
    conn = DriverManager.getConnection();
    stmt1 = conn.createStatement();
    // some sql here
    stmt2 = conn.createStatement();
    // some more sql here
} finally {
    if ( stmt1 != null ) stmt1.close();
    if ( stmt2 != null ) stmt2.close();

XOQ-01950: Cube contains multiple BuildSpecifications with the same name.

Hi All ,
While executing the Maintain Cube option it is throwing below issue : Any Clue ?
XOQ-01950: The AWCubeOrganization for cube "NN_OLAP_POC.MARKET_SALES_CUBE" contains multiple BuildSpecifications with the same name.
Thanks,
DxP

This error should only show up when you create a cube (by importing XML), not when you maintain it. So I will assume that this is what you mean.
If you import XML that refers to an OLAP object that already exists, then the new definition overrides the old one. The only exception to this rule is the BuildSpecification object. This kind of object is named, but it does not follow these conventions (for messy implementation reasons). If you import XML that has a BuildSpecificaiton with the same name as one that already exists, then you will trigger the error you see. Here is an example of the relevant XML.
<BuildSpecifications>
<![CDATA[BUILD SPEC LOAD_AND_AGGREGATE
LOAD NO SYNCH,
SOLVE
) ]]>
</BuildSpecifications>The workaround is to delete this section from the XML before importing it.

Writing to multiple tags with the same name

Hi,
I am writing to multiple tags with the same name but in different groups. I have noticed only the tag from the first group gets updated. How can I write to a tag in a specific group in this scenario?
Regards,
Chanti.

Heres what I found.
When I tried "http://<server>:<port>/XMII/Illuminator?Server=<Name of the TAG dataServer>&Mode=CurrentWrite&TagName=<Group>.<TagName>", the outcome was "Message
Could not add "<Group>.<TagName>" to the response list.
Message
No tags selected."
When I tried "http://<server>:<port>/XMII/Illuminator?Server=<Name of the TAG dataServer>&Mode=CurrentWrite&TagName=<TagName>", it seemed like it worked fine.
Any thoughts?

How to build a array with high sampling rates 1K

Hi All:
Now I am trying to develop a project with CRio.
But I am not sure how to build a array with high sampling rates signal, like >1K. (Sigle-point data)
Before, I would like to use "Build Arrary" and "Shift Register" to build a arrary, but I found it is not working for high sampling rates.
Is there anyother good way to build a data arrary for high sampling rates??
Thanks
Attachments:
Building_Array_high_rates.JPG ‏120 KB

Can't give a sample of the FPGA right now but here is a sample bit of RT code I recently used. I am acquiring data at 51,200 samples every second. I put the data in a FIFO on the FPGA side, then I read from that FIFO on the RT side and insert the data into a pre-initialized array using "Replace Array subset" NOT "Insert into array". I keep a count of the data I have read/inserted, and once I am at 51,200 samples, I know I have 1 full second of data. At this point, I add it to a queue which sends it to another loop to be processed. Also, I don't use the new index terminal in my subVI because I know I am always adding 6400 elements so I can just multiply my counter by 6400, but if you use the method described further down below , you will want to use the "new index" to return a value because you may not always read the same number of elements using that method.
The reason I use a timeout of 0 and a wait until next ms multiple is because if you use a timeout wired to the FIFO read node, it spins a loop in the background that polls for data, which rails your processor. Depending on what type of acquisition you are doing, you can also use the method of reading 0 elements, then using the "elements remaining" variable, to wire up another node as is shown below. This was not an option for me because of my programs architecture and needing chunks of 1 second data. Had I used this method it would have overcomplicated things if I read more elements then I had available in my 51,200 buffer.
Let me knwo if you have more qeustions
CLA, LabVIEW Versions 2010-2013
Attachments:
RT.PNG ‏36 KB
FIFO read.PNG ‏4 KB

How does one transfer CS5 actions for use with CS6?

CS6 installation, which was uneventful, has transferred none of my actions from my copy of CS5. The CS5 actions are located in the actions folder of the APPLICATION/PHOTOSHOP CS5/PRESETS/ACTIONS. The "actions" folder in application support/adobe in my library is empty, and has always been so.
Only the CS6 default actions are located in the same folder for CS6.
I use imac i7, lion.
Note that i also have CS3 and CS4 on my machine. This due to recent upgrade to CS5 and recent upgrade to LION, and my general paranoia.
Must i load each action into CS6, one at a time?
thanks to any and all.
vince

Re: how does one transfer CS5 actions for use with CS6?
On a Mac - There are multiple ways to do this. I have done them both ways. In order to do this you need to know where you have your actions stored, and you can move them all at once if you have them stored in the same location.
1. You can load an action ONE AT TIME into your actions palette by:
     A. Open up the action palette and click on the little arrow with 4 little horizontal lines next to it on the upper right corner of the actions palette.
     B. Select "Load Actions" and a Finder window will open up and you can search your computer through this window for your actions.
     C. Click on the action from the Finder window then click 'Open' at the bottom right of the finder window.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens- click on 'Save Actions'. It will select the location where the          actions are currently stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
2. TO MOVE MULTIPLE ACTION SETS AT ONCE
     A. Open up CS6 (or CS5) and move the Photoshop workspace it to the right side of your computer screen so you can see your desktop on the left side.
     B. Open up your Finder search window from your dock (the square blue head icon thingy for those who are new to photoshop). Move this to the left side of your screen so you can see the Photoshop work space on the right and the Finder window          on the left. In the Finder window, navigate to the file where all your actions are stored, select all the actions in the file (command+A will select everything in the file if you are actively inside the open file) or you can select multiple files           individually by continuously holding down the command key and clicking on the different actions you want to move.
     C. With the Photoshop workspace visible on the right, and the actions palette open so you can see that the actions actually transferred - In the Finder window, click the selected actions you want to load and drag them over to the Photoshop           workspace. I did this without an image open, I just dragged them onto the empty workspace. The actions should all appear immediately in the actions palette that is open.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens click on 'Save Actions'. It will select the location where the           actions are stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
I hope this helps.
and I hope there are no typos.

Adding Multiple Records with Express

Hello All,
We have a CRUD application written in Express 2.0 that allows users to
enter part numbers and associated information. Our part numbers are
structured as a prefix, alpha, suffix and 'M' or 'P' number variations :
1 AB 2 P3 for example. We have provided functionality to allow the
user to enter multiple P or M variations all at once, say 1 AB 2 P1 thru
P100,
using a dialog box where they enter the starting number, ending number
and step.
The problem comes in the AddRecordsToSave method.
This method correctly builds the array of BusinessClass needed to be
passed to the Save method, however, the Save method adds only the
initial record (the one from the original Express data entry screen)
to the database.
I have traced the problem to the BusinessClient.Update method called
from
Save. I believe I am missing some query information that should be
built into
AddRecordsToSave, but I am completely unsure of how to provide this.
As you can see in the attached code, we are using the LogAttr method to
post
changes. Apparently this is not enough. What am I missing here?
The InstanceStatus key of the added records is set to ST_EMPTY by
default....
I have tried forcing this to ST_UPDATE, only to receive an error that it
should
be ST_EMPTY......?? I am confused. If anyone can shed some light on this
for me,
I would appreciate it. Thanks for any help.
Scott Guman E-mail: [email protected]
IRM Analyst II Phone: (610) 709-2144
Mack Trucks, Inc. Fax: (610) 709-4713
Allentown, PA 18105

Hi There,
If attr is not specified in your LogAttr() call, the
BusinessClass
will be put in the update state but not attributes will
be logged.
That may be the reason why only the displayed record(
fetched from
the DB ) is getting logged, but not the new records.
I think you should use ATTR_SIMPLE with LogAttr. This
will cause
all the attributes to be logged and a proper query to
be built
to insert the newly created record. I am no Express
Guru,
but it works fine for me. Also, try not to modify
InstanceStatus directly.
Sometimes it might lead to inconsistencies. The online
help
The Add Records to Save example really helps.
Good luck!
Ajith Kallambella. M.
Forte Systems Engineer,
International Business Corporation
-----Original Message-----
From: Scott Guman [SMTP:[email protected]]
Sent: Wednesday, September 16, 1998 9:34 AM
To: 'Forte Users'
Subject: Adding Multiple Records with Express
Hello All,
We have a CRUD application written in Express 2.0 that
allows users to
enter part numbers and associated information. Our
part numbers are
structured as a prefix, alpha, suffix and 'M' or 'P'
number variations :
1 AB 2 P3 for example. We have provided functionality
to allow the
user to enter multiple P or M variations all at once,
say 1 AB 2 P1 thru
P100,
using a dialog box where they enter the starting
number, ending number
and step.
The problem comes in the AddRecordsToSave method.
This method correctly builds the array of BusinessClass
needed to be
passed to the Save method, however, the Save method
adds only the
initial record (the one from the original Express
data entry screen)
to the database.
I have traced the problem to the BusinessClient.Update
method called
from
Save. I believe I am missing some query information
that should be
built into
AddRecordsToSave, but I am completely unsure of how to
provide this.
As you can see in the attached code, we are using the
LogAttr method to
post
changes. Apparently this is not enough. What am I
missing here?
The InstanceStatus key of the added records is set to
ST_EMPTY by
default....
I have tried forcing this to ST_UPDATE, only to receive
an error that it
should
be ST_EMPTY......?? I am confused. If anyone can shed
some light on this
for me,
I would appreciate it. Thanks for any help.
Scott Guman E-mail:
[email protected]
IRM Analyst II Phone: (610) 709-2144
Mack Trucks, Inc. Fax: (610) 709-4713
Allentown, PA 18105
<< File: AddRecordsToSave.txt >>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Distribute multiple forms with HDWForm2Mail

I am trying to create multiple forms using Dreamweaver's extension HDWForm2Mail. I thought this would be simple since I created my first form no problem and had it working within minutes.
As I would like to have multiple forms, each on separate pages, I have run into an unexpected problem... Whenever I create more than one form everything works with the form itself (redirect and all), but when it comes through to my email it doesn't display any message.
I am puzzled on how to fix this. I have had it working multiple times with a single form, but if I add two forms it automatically breaks. Also, I have also noticed as soon as I add a "file field" it also gives me the same result. What is up with this????
Has anybody ever had this problem happen before or am I missing something obvious? I would appreciate the help!
Justin

Thanks for your responses.. and your input
But the following details doesn't clear the picture of using multiple form in struts..........as I think.
by the way I am going to create a form in struts and print the values of form first......
Please give the more details..
Thanks
first define the form bean and then use that in action mappingform-bean
ex
<form-bean name="wamHistoryForm"
type="com.td.rainbow.web.wam.form.WAMHistoryForm" />
then
<action path="/WAMHistoryDisplay"
type="com.td.rainbow.web.wam.actions.WAMHistoryDisplayAction"
className="com.td.rainbow.web.core.config.RainbowActionDescriptor"
name="wamHistoryForm" validate="false">
<set-property property="builder"
value="com.td.rainbow.web.wam.builder.WAMHistoryFormBuilder" />
<forward name="Success" path="wam_history" />
<forward name="Failure" path="wam_history" />
</action>

Windows 8.1 pro with cs6 masters. or should i stick with windows 7 pro?

i am building a new pc and considering using windows 8.1 pro with cs6 masters. has anyone had any issues or should i stick with windows 7 pro?

Hi Tedm,
Please check the system requirement for CS6 Master Collection in the below mentioned link.
System requirements | Adobe Creative Suite 6
For more info or clarification you can contact our chat support as well : Adobe - Contact Support – Download and Installation
Thanks!
Eshant

Multiple members with same alias

I have multiple members with same alias name. Are there anyway to build dimension members with same alias name?

Typically I will concatinate the member name (as either a prefix or suffix ) to the Alias to make it unique

Printing with CS6 Beta on Epson 2880 ?

I'm having the same problem printing with CS6 Beta that I have with CS5 (but not with CS4): the colors are grayer than appear on my calibrated MacBook Pro screen. A difference with CS6 Beta is a redder red, but stil the same grayed out colors.
I've coordinated all the settings in CS, have an up to date printer driver, but the problem occurs regardless of the settings (ex. various printer profiles). I'm wasting a lot of ink and paper.
Hoped this would be fixed in CS6 Beta.
Any solutions?

If unchecking the scene-referred profiles box clears the display problem in Photoshop, you most likely have hit a known bug with defective monitor profiling packages building defective monitor profiles that affect Photoshop and After Effects — specifically, the defective profile is erroneously marked as "scene referred."
Version 4 ICC Profiles: If your are using v4 printing profiles, try Googling for more information...some symptoms of this bug are Photoshop prints a light cyan or blue in the page white areas. The Fix is to use Version 2 printer profiles.
there is another old known issue that has to do with trying to Hard Proof simulate press conditions (printing cyan in whites) but i am not sure what you are trying and i can't recall it right now
if those aren't it upload these screenshots of your workflow:
show full Photoshop window including zoom% and Docuent Profile in lower left corner

Building multiple outcomes with CS6

Similar Messages

Maybe you are looking for