Building my Arch: is Enlightenment17 for me?

Dear Arch Community,
I'm moving from Linux Ubuntu with the standard GNOME inteface and I want to start using Arch Linux for reasons that I probably don't have to spell out here. I've been making my way through the documentation, and have pretty much gotten stuck on choosing a Desktop Environment. While I know I can just switch between several window managers, I'd feel much better if I had an impression of what I'm getting into before I make the leap. I've done a search and did not find something that gave me an answer I could feel satisfied with.
The situation is thus: I have a small Samsung netbook of modest capabilities that I work with on the road. Therefore I want a stable system that lets me do Office work, watch movies, listen to music and browse and there it mostly ends. I have been looking for a full-environment DE that is fast and work-oriented and especially low-resource.
I have used GNOME extensively and while it's not bad, it's too broad and bulky for my tastes and the displays tend to take up a lot of screen space. As a fan of GNOME Do I want to use such an application for my computer use.
If anyone could help me get perspective on how and what to choose I would appreciate it greatly, especially in the form of pros and cons and comparisons if possible.
Cheers,
Matsjo

Matsjo wrote:While I know I can just switch between several window managers, I'd feel much better if I had an impression of what I'm getting into before I make the leap. I've done a search and did not find something that gave me an answer I could feel satisfied with.
We discourage these sorts of threads because they invariably become a list of what individuals prefer: the Wiki has excellent entries on all of the DEs and most of the WMs: you are encouraged to read through those, look at the dedicated threads for WMs here on the boards, install a couple and make up your own mind.
Installing E17 or LXDE is not an irreversible choice - you can uninstall one or the other, or have both on the system and choose when you start X.
Closing.

Similar Messages

Error! Build of vmblock.ko failed for: 3.12.2-1-ARCH (x86_64)

Hello,
I'm very new to the world of arch linux. I see that there are patches for this but I don't have knowledge of using them.
Help please?
sudo dkms install -m open-vm-tools -v 2013.09.16 -k $(uname -r)
Kernel preparation unnecessary for this kernel. Skipping...
Building module:
cleaning build area....
make KERNELRELEASE=3.12.2-1-ARCH VM_UNAME=3.12.2-1-ARCH MODULEBUILDDIR=/var/lib/dkms/open-vm-tools/2013.09.16/build -C vmblock; make VM_UNAME=3.12.2-1-ARCH MODULEBUILDDIR=/var/lib/dkms/open-vm-tools/2013.09.16/build -C vmci; make VM_UNAME=3.12.2-1-ARCH MODULEBUILDDIR=/var/lib/dkms/open-vm-tools/2013.09.16/build -C vmhgfs; make VM_UNAME=3.12.2-1-ARCH MODULEBUILDDIR=/var/lib/dkms/open-vm-tools/2013.09.16/build -C vmsync; make VM_UNAME=3.12.2-1-ARCH MODULEBUILDDIR=/var/lib/dkms/open-vm-tools/2013.09.16/build -C vmxnet; make VM_UNAME=3.12.2-1-ARCH MODULEBUILDDIR=/var/lib/dkms/open-vm-tools/2013.09.16/build -C vsock.........
Error! Build of vmblock.ko failed for: 3.12.2-1-ARCH (x86_64)
Consult the make.log in the build directory
Last edited by diabolik (2013-12-02 15:31:57)

OK, assuming the patch posted there fixes the problem, the only problem before you is how to patch?
If that's the case, you should first download the patch content posted on the AUR page and save it with the given filename, i.e., vmblock-9.0.2-5.0.2-3.12.patch
Then put the filename in the sources field of the PKGBUILD and put the file's md5sum in the respective field of the PKGBUILD as well.
After that, run
$ makepkg -si
You might want to read the following for reference:
https://wiki.archlinux.org/index.php/PKGBUILD
https://wiki.archlinux.org/index.php/Makepkg
Last edited by x33a (2013-12-03 05:48:46)

Build Plugin IS NOT DEFINED for this component or the defined Build Plugin

Hello,
we have upgraded our NWDI (nw04s) to SP13 and to DB2 V.9. We don't know if this has something to do with our problem. The NWDS developers called us. They can't activate the changes anymore. When I check the CBS I can see, that all components are broken. Any idea?
REgards,
Alexander
Build number assigned: 487
Change request state from QUEUED to PROCESSING
REQUEST PROCESSING started at 2007-10-10 10:46:13.526 GMT
    BUILD request in Build Space "NW1_GPMS_D" at Node ID: 27,972,750
     [id: 473; parentID: 0; type: 2]
    Waiting for access: 33 ms
    ===== Pre-Processing ===== started at 2007-10-10 10:46:13.559 GMT
        Calculate all combinations of components and variants to be built...
        Analyze request DC BV... started at 2007-10-10 10:46:13.702 GMT
                'zurich.com/gpms/jco_pool' variant 'default'
                'zurich.com/gpms/jco_pool' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/yea' variant 'default'
                'zurich.com/gpms/yea' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/chgpwd' variant 'default'
                'zurich.com/gpms/chgpwd' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/rep' variant 'default'
                'zurich.com/gpms/rep' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/model' variant 'default'
                'zurich.com/gpms/model' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/idp' variant 'default'
                'zurich.com/gpms/idp' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/ovt' variant 'default'
                'zurich.com/gpms/ovt' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/arch' variant 'default'
                'zurich.com/gpms/arch' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/myr' variant 'default'
                'zurich.com/gpms/myr' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/div' variant 'default'
                'zurich.com/gpms/div' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/ume' variant 'default'
                'zurich.com/gpms/ume' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/com' variant 'default'
                'zurich.com/gpms/com' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/ovw' variant 'default'
                'zurich.com/gpms/ovw' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/obj' variant 'default'
                'zurich.com/gpms/obj' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/chgpwdb' variant 'default'
                'zurich.com/gpms/chgpwdb' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/pdata' variant 'default'
                'zurich.com/gpms/pdata' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
        Analyze request DC BV... finished at 2007-10-10 10:46:14.049 GMT and took 347 ms
        Prepare build environment in the file system... started at 2007-10-10 10:46:14.049 GMT
            Synchronize development configuration... started at 2007-10-10 10:46:14.049 GMT
            Synchronize development configuration... finished at 2007-10-10 10:46:14.068 GMT and took 19 ms
            Synchronize used libraries... started at 2007-10-10 10:46:14.068 GMT
            Synchronize used libraries... finished at 2007-10-10 10:46:14.068 GMT and took 0 ms
        Prepare build environment in the file system... finished at 2007-10-10 10:46:14.068 GMT and took 19 ms
    ===== Pre-Processing ===== finished at 2007-10-10 10:46:14.069 GMT and took 510 ms
    Waiting for access: 3 ms
    ===== Processing ===== started at 2007-10-10 10:46:14.072 GMT
        No Components to be built.
        BUILD DCs
    ===== Processing ===== finished at 2007-10-10 10:46:17.407 GMT and took 3 s 335 ms
    ===== Post-Processing =====
    Waiting for access: 5 ms
    ===== Post-Processing ===== started at 2007-10-10 10:46:17.412 GMT
        STORE build results... started at 2007-10-10 10:46:17.413 GMT
            "zurich.com/gpms/jco_pool" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/jco_pool": store meta-data
            "zurich.com/gpms/jco_pool" in "default" variant is PROCESSED
            "zurich.com/gpms/yea" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/yea": store meta-data
            "zurich.com/gpms/yea" in "default" variant is PROCESSED
            "zurich.com/gpms/chgpwd" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/chgpwd": store meta-data
            "zurich.com/gpms/chgpwd" in "default" variant is PROCESSED
            "zurich.com/gpms/rep" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/rep": store meta-data
            "zurich.com/gpms/rep" in "default" variant is PROCESSED
            "zurich.com/gpms/model" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/model": store meta-data
            "zurich.com/gpms/model" in "default" variant is PROCESSED
            "zurich.com/gpms/idp" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/idp": store meta-data
            "zurich.com/gpms/idp" in "default" variant is PROCESSED
            "zurich.com/gpms/ovt" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/ovt": store meta-data
            "zurich.com/gpms/ovt" in "default" variant is PROCESSED
            "zurich.com/gpms/arch" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/arch": store meta-data
            "zurich.com/gpms/arch" in "default" variant is PROCESSED
            "zurich.com/gpms/myr" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/myr": store meta-data
            "zurich.com/gpms/myr" in "default" variant is PROCESSED
            "zurich.com/gpms/div" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/div": store meta-data
            "zurich.com/gpms/div" in "default" variant is PROCESSED
            "zurich.com/gpms/ume" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/ume": store meta-data
            "zurich.com/gpms/ume" in "default" variant is PROCESSED
            "zurich.com/gpms/com" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/com": store meta-data
            "zurich.com/gpms/com" in "default" variant is PROCESSED
            "zurich.com/gpms/ovw" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/ovw": store meta-data
            "zurich.com/gpms/ovw" in "default" variant is PROCESSED
            "zurich.com/gpms/obj" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/obj": store meta-data
            "zurich.com/gpms/obj" in "default" variant is PROCESSED
            "zurich.com/gpms/chgpwdb" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/chgpwdb": store meta-data
            "zurich.com/gpms/chgpwdb" in "default" variant is PROCESSED
            "zurich.com/gpms/pdata" in "default" variant is BROKEN. No build results to store.
            "zurich.com/gpms/pdata": store meta-data
            "zurich.com/gpms/pdata" in "default" variant is PROCESSED
        STORE build results... finished at 2007-10-10 10:46:17.440 GMT and took 27 ms
        Change request state from PROCESSING to SUCCEEDED
        Analyze effect of applied changes to buildspace state... started at 2007-10-10 10:46:17.440 GMT
            Skip check for build time dependency cycles. DC metadata is not changed.
            Determine components that have become DIRTY due to the results of this request started at 2007-10-10 10:46:18.601 GMT
                No such components have been found.
            Determine components that have become DIRTY due to the results of this request finished at 2007-10-10 10:46:18.602 GMT and took 1 ms
            No Internal Build Requests are canceled by this request
        Analyze effect of applied changes to buildspace state... finished at 2007-10-10 10:46:18.642 GMT and took 1 s 202 ms
        Request SUCCEEDED
    ===== Post-Processing ===== finished at 2007-10-10 10:46:18.646 GMT and took 1 s 234 ms
REQUEST PROCESSING finished at 2007-10-10 10:46:18.646 GMT and took 5 s 120 ms
    ===== Pre-Processing ===== started at 2007-10-10 07:16:55.069 GMT
        Calculate all combinations of components and variants to be built...
        Analyze request DC BV... started at 2007-10-10 07:16:55.104 GMT
                'zurich.com/gpms/jco_pool' variant 'default'
                'zurich.com/gpms/jco_pool' variant 'default' cannot be built and will be marked as BROKEN.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
                'zurich.com/gpms/yea' variant 'default'

Here are some things to have a look at:
- Check your SC definitions and their Usage Dependencies in the SLD
- Check that the basis SCA's have been imported into the track. You can quickly see this by having a look at the total nr of DCs for these SCs in CBS.

Adobe Air Apps for OS X: Unable to build a valid certificate chain for the signer. // Code Signing on OS X 10.10 Yosemite

Hi,
I created several OS X Apps using Adobe Air. That worked quite well before. Now I have do update my OS X Apps - therefore I also needed update my certificates. [ I'm using Flash CC 2014 on OS X Yosemite 10.10 ]. But whatever I do it doesn’t work anymore. I always get this Message saying:
Unable to build a valid certificate chain for the signer.
I googled a lot and the only "guide" I found is this post (from April 2013) about code singing - http://scottgaertner.com/code_signing/
I’m not used to deal with this kind of stuff (CA etc.) - so it's quite confusing to me.
Would anybody please be so kind and tell me what I have to do?
Is there any instruction from Adobe? (I didn't find one yet)
A step by step instruction for absolute dummies would be great!
Best regards and thank you in advance
Jan

Hi Mukesh,
I installed the Flash CC 2014 update and added some Certificates from Apple to my Keychain. Now EVERYTHING works fine again!! :-)
Thank you very much for the Update! :-) Good job!
Best regards
Jan

Error message generating Adobe Air output Unable to build a valid certificate chain for the signer

error message generating Adobe Air Output: Unable to build a valid certificate chain for the signer.

Are you talking about AIR Help produced by RoboHelp or an AIR application that you are creating?
If the latter, please see the notice at http://forums.adobe.com/community/robohelp/airhelp
If you are using RoboHelp, which version?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Building an Admin Console Extension for a Custom Security Provider

I am looking for an example or a description how to build an Administration Console extension for a custom Authentication Provider.
Especially the creation page for the provider is interesting because I am not able to create and register the required Authentication Provider MBean.
The call “mbeanHome.getMBeanServer().createMBean(className,objectname)” always throws the following Exception “javax.management.ReflectionException: The MBean class could not be loaded by the default loader repository”
Even if I try the class “weblogic.security.providers.authentication.IPlanetAuthenticator”, that is part of the bea distribution, the same exception is thrown.
It seams that the Problem has something to do with class loaders?
When I use the standard admin console pages to create and configure my provider everything works fine.
The only example “kennedy0208.zip” I found in the net does not deal with the creation of the MBean.
It only customizes the edit pages for the provider and at that point the MBean has already been created by the standard admin pages.
Maybe the author discovered the same Problems and gave up!?
What makes me wondering is that I have to put my MBean Classes to my console extension war file to be able to import the packages in my jsp.
If I not put the classes to my war the compiler throws an exception because he can’t resolve the package.
Because I moved my provider implementation jar to the directory “WLHOME\server\lib\mbeantypes” as described in the bea documentation it should run without putting the classes to the war!?!
I am very surprised that the bea documentation does not provide any example about this topic.

Found it. Cut and paste error. I still had one of their example class
names in my code. Oops.

How to avoid Build Array function inside a For (while) Loop?

Hi there,
I have a simple question about how to avoid using Build Array function inside the loop. Now I want to remove the Build Array funtion inside the loop to improve the performance (To get better memory management). Any idea how to do that?
Thanks a lot!
Warmest regards,
Chong

It's been my experience that using the auto-indexing to build an array
on a For loop is just as good as initializing and replacing elements.
The For loop knows before it runs how many iterations it has to run and
can allocate the array ahead of time.
You're better off initializing and replacing when using a While loop
because it does not know how many iterations it will run and can't
pre-allocate the array ahead of time.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

How to build dynamic databases(record set) for mobile?

Hi All ,
i have an applocation that needs to personalize the data for users .
i have the data available , but dont know how to personalize it fot users to download special version of my application.
how to build dynamic databases(record set) for mobile?

In the load rule in the dimension build settings you would need to go to the tab dimension definition, choose the time dimension and right click on it. Select Edit properties. If you have not done so, set the dimension to be the time dimension. Then go to the generations/levels tab and set the generation names you need. For example if you want YTD, you would set the generation name to Year, if you want QTD set it to Quarter. You would set the number to the generation number that coorisponds to the generation. The DBAG has the list of names for all of the DTS members.

Code signing cert error using Digicert - Unable to build a valid certificate chain for the signer

Steps to fix this error on code signing adobe air using .p12 cert from Digicert - Unable to build a valid certificate chain for the signer
a. Open Firefox and browse to https://www.digicert.com/digicert-root-certificates.htm
b. On the middle of the page, download -
DigiCert Assured ID Code Signing CA-1
Valid until: 10/Feb/2026
Serial #: 07:F4:73:6F:AF:EF:40:8A:1F:66:40:F2:65:D1:0A:C1
Thumbprint: B170A10819BEA936905D719E643399783E1F4567
Download
c. Install the cert in Firefox
d. Once done, export again the code signing cert from digicert, through (click Firefox -> Preferences -> View Certificates -> HIghlight the digicert code signing cert -> click Backup)
e. Done, the newly exported file should now have the valid certificate chain and that should fix the error "Unable to build a valid certificate chain for the signer"
Even though this is from Digicert, this should also work for other Certificate Authority providers assuming you download your provider's root cert for code signing.
Regards,
Reigner S. Yrastorza

Are you talking about AIR Help produced by RoboHelp or an AIR application that you are creating?
If the latter, please see the notice at http://forums.adobe.com/community/robohelp/airhelp
If you are using RoboHelp, which version?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Unable to build a valid certificate chain for the signer

Updating an AIR application after a few years and needed a new signing certificate which I purchased from Comodo. Imported it successfully into Keychain Access and exported it as a pfx file. When I identified this certificate to Flash Builder it went all the way through the build process and then came up with the error "Unable to build a valid certificate chain for the signer".
I can see there was a discussion on this matter in October 2011 but this did not seem to answer my question as that guy was trying to use an Apple Dev Centre key rather than paying for one like I did.
TIA
David

In Keychain Access, command-click your Class 2/3 certificate, the CA's intermediate certificate, and the CA's root certificate before hitting export.
Short guide: Code Signing Certificates for Adobe Air in OS X

Error creating AIR file: Unable to build a valid certificate chain for the signer.

Hi, My boss got a certificate from Thawte, and I'm getting this error message when building my AIR app.
Error creating AIR file: Unable to build a valid certificate chain for the signer.
I'm on windows XP.
thanks,
steve

To manage your code signing certificate, please see
http://www.adobe.com/devnet/air/articles/signing_air_applications_print.html
The error you are seeing is typically caused by exporting a cert without the trust chain. On Windows, in IE, you can manage your keystore by going to
Internet Options > Content > Certificates
When you export the certificate needed for signing your app, be sure to check “Include all certificates in the certificate path, if possible”.

Built app with Flash Builder 4.6 and compiled for iOS, now error when loading to appstore

I built a fairly simple app using Flash Builder 4.6 and have successfully deployed it to the Android Market (after testing on my own Android device). I have also taken that same app and compiled it for iOS and tested it on my own iPad.
I have then done the release build with the "Final Release for App Store Distribution" option in the release build wizard. I have all the correct provisioning certificates in place and compiled the application to a .ipa file.
At this point, using a MAC, I have run the Application Loader utility to upload my application to the itunesConnect portal to get it in the appstore. I've already gone through the steps of entering the metadata, price scheme, and screenshots in the itunes connect portal, and just need to upload it for review.
When I upload the .ipa file into the application loader, it gives me the following error:
"iPhone/iPod Touch: application executable contains unsupported architecture(s): arm"
Anyone have any idea what this means and how I can fix it? Any help is greatly appreciated!
Thanks in advance!

Solved it. Just added the following in the <InfoAdditions> tag for iPhone in my app descriptor XML file:
<key>UIRequiredDeviceCapabilities</key>
<array>
<string>wifi</string>
<string>armv6</string>
<string>armv7</string>
</array>

Cbs build portal application dc fail. Build Plugin IS NOT DEFINED for this

hi all
I use NW7.0 ehp1,have portal and a nwdi.
I create a track at nwdi . and develop a portal application .
local build is ok . but when i check in .run a activitce. dc is broken.
log is -
CBS Request Log - [ 300/DEP_PESKM_D ]
Build number assigned: 314
Change request state from QUEUED to PROCESSING
REQUEST PROCESSING started at 2010-11-05 02:17:38.921 GMT
    ACTIVATION request in Build Space "DEP_PESKM_D" at Node ID: 13,975,650
     [id: 300; parentID: 0; type: 4]
     [options: NO OPTIONS]
    Waiting for access: 79 ms
    ===== Pre-Processing ===== started at 2010-11-05 02:17:39.000 GMT
        List of requested for activation activities:
            'deep.com_PESKM_1' compartment
                tet
                    [ISN 111][created by YANLIANG at 2010-11-05 10:17:31.0][OID 6b2f604ae87c11df94ff000000d54062]
            There is 1 activity in compartment deep.com_PESKM_1
            1 activity will be processed by this request
        Analyze dependencies to predecessor activities... started at 2010-11-05 02:17:39.031 GMT
            Analyzing predecessors in compartment "deep.com_PESKM_1"
                No dependencies to predecessor activities found.
        Analyze dependencies to predecessor activities... finished at 2010-11-05 02:17:39.046 GMT and took 15 ms
        Analyze versions... started at 2010-11-05 02:17:39.046 GMT
            List Active Versions Report: "HTTP/1.1 207 Multi-Status" finished at 2010-11-05 02:17:41.812 GMT and took 2 s 766 ms
            Synchronize metadata for [deep.com.cn/dc_logo_par] started at 2010-11-05 02:17:41.812 GMT
                Verification of DL [ws/PESKM/deep.com_PESKM/dev/active/] finished at 2010-11-05 02:17:41.906 GMT and took 0 ms
                Verification of cache (level 2: Comparison of attributes) finished at 2010-11-05 02:17:41.937 GMT and took 31 ms
            Synchronize metadata for [deep.com.cn/dc_logo_par] finished at 2010-11-05 02:17:41.937 GMT and took 125 ms
            < CHANGE > 'deep.com.cn/dc_logo_par' DC
        Analyze versions... finished at 2010-11-05 02:17:41.937 GMT and took 2 s 891 ms
        Analyze activities... started at 2010-11-05 02:17:41.937 GMT
            Loading component definitions
            1 component to be build in compartment "deep.com_PESKM_1"
        Analyze activities... finished at 2010-11-05 02:17:42.000 GMT and took 63 ms
        Calculate all combinations of components and variants to be built...
        Analyze request DC BV... started at 2010-11-05 02:17:42.109 GMT
                'deep.com.cn/dc_logo_par' variant 'default'
                'deep.com.cn/dc_logo_par' variant 'default' cannot be built. ACTIVATION will fail.
                Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
        Analyze request DC BV... finished at 2010-11-05 02:17:42.140 GMT and took 31 ms
    ===== Pre-Processing ===== finished at 2010-11-05 02:17:42.187 GMT and took 3 s 187 ms
    Change request state from PROCESSING to FAILED
    Error! The following problem(s) occurred during request processing:
    Error! The following error occurred during request processing:Activation failed due to component "deep.com.cn/dc_logo_par" variant "default". The component is BROKEN.
REQUEST PROCESSING finished at 2010-11-05 02:17:42.187 GMT and took 3 s 266 ms
No build logs available for the request.
Edited by: yan liang on Nov 5, 2010 3:12 AM

Hi Yan,
please check the NWDI troubleshooting guide:
http://wiki.sdn.sap.com/wiki/display/TechTSG/%28NWDI%29%28CBS%29Q0030
--> Understanding Broken and Dirty DCs
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30b7c94e-fc6b-2910-30b8-d34a7b51309e
Did you import the dependent build plugins for the track in question?
(tab "development" in the /devinf --> CMS webui --> Transport studio)
See also the sap note: #1080927 - Creating CMS Tracks for Common Application Types (http://service.sap.com/sap/support/notes/1080927)
Best Regards,
Ervin

MOVED: Building my own PC - preparation for attempt 2!

This topic has been moved to Anything Under The Sun.
Building my own PC - preparation for attempt 2!

You realize this isn't the MacBook Pro forum, right?

Arch VPS (looking for a comparable plan/host) JaguarPC Business

I have used JaguarPC in the past and love it's packages, it irks me that they don't have a handful of distro's like other hosts but offer a lot of bandwidth space.
This is what I was going to order but I rather stick to the OS I know, and a tip for people thinking about using arch use ABS for packages and always, always, always ask questions before updating or keep an eye on the wiki/abs to make sure it's stable.
This is JaguarPCs Business VPS plain, I'm looking for a comparable plan with a host that offers Arch or even Gentoo Linux. I don't hate debian, I do not like CentOS and RPMs, arch is a cleaner OS imo.
100 GB Disk Space
5,000 GB Bandwidth
2048 MB RAM
4096 MB Burst RAM
Equal CPU (2 core min.)
The price is $50/mo and I'd like to stick around that price if possible but I can go higher if needed, just don't want to pay more just cause of a different OS.

Where are you located? FanaticalVPS is what a friend and I use, but it is located in Germany. Sometimes the lag is higher than you might want but for the most part it is fine. I made a post in this thread about some of the other downsides. And some of the upsides Make sure you look into the uptime thing though, it may be unacceptable to you.
You'd need a Huge for $30/month and a $10-$20/month RAM upgrade to get the specs you want. I don't know about the CPU stuff, you'd have to talk to support or look at their page. Bandwidth is "fair-usage unlimited." If you're paying that much I'm sure you'd get 5TB out of it, but best ask to be sure. I pay for a Mini and fair usage for that is like 1.5TB. They support Arch of course.
Edit: Forgot to mention! There's a wiki page about VPS's that support Arch.
Last edited by jac (2012-06-07 18:32:37)

Building my Arch: is Enlightenment17 for me?

Similar Messages

Maybe you are looking for