Building Odata service for Purchase Requisition
Hi Experts,
I have a requirement where I need to build a workflow approval service for Purchase requisition.
I want to build this service using the BOR/RFC option for itemwise approval of PR.
There are 2 BAPI's BAPI_REQUISITION_GETDETAIL and BAPI_PR_GETDETAIL but I am not getting the approach to get itemwise detailed information of a PR.
Could you please help me the steps taken to build this service.
Thanks in advance.
Hi Kavi;
I have configured Workflow Mailer Service for PO Approval and REQ Approval. For PO Approval Mail is coming correctly. But For Requisition Approval , Mail not coming. I have given 'REQAPPRV' in Correlation ID. What is error, did you check log file for details?
Please also check below:
11i/R12 - A guide for troubleshoting Workflow Notification Emails - Inbound and Outbound Doc ID:831982.1
Notifications Not Being Sent In Workflow Doc ID: 1012344.7
Workflow Mailers Not Sending Notifications Doc ID: 560472.1
Regard
Helios
Similar Messages
-
ESOA: Enterprise Service for Purchase Requisition Query.
Hi,
I am not sure whether I am posting this question to the right forum, if not then please let me know the correct route.
I am trying to test the standard enterprise service for purchase requisition query response. It brings all the purchase requisitions even though they are deleted and not appearing in MD04.
Is there a way I can restrict and get only active purchase requistion. I am using the service PurchaseRequestItemByProductAndOrganisationalDataQueryResponse_InNot Answered.
-
Account assignement category for purchase requisition - error message
Hi All!
I created a new Item category in service order (IW31) "O" with the account assignment category "O". If I don't set the Consumption posting indicator to V for this category, when I set the account assignment category "O" to the purchase requisition in <i>Plant Maintenance and Customer Service-Maintenance and Service Processing-Maintenance and Service Orders-General Data-Define Account Assignment Category/Document Type for Purchase Requisitions</i>, I receive the message:
<b>"Acct. assign. cat. "O" for purchase req. does not exist.
Message no. CS 075"</b>
The client request is not to charge immediately for the goods receipt with the relevant costs the service order. The client wants to create the goods receipt in a storage location for the plant and then confirm the components and charge the costs after the component confirmation (movement type 261) - similar to stock material.
Any idea about what should I do?
Thank you.Hi Everyone,
The problem is solved now. The cause was that the test requisition that I was making was satisfying more than one rules and hence I end dated the remaining rules which solved the problem.
Thanks! -
SAP workflow for purchase requisition and purchase order
Hello Sap Workflow,
Can you please help me on building workflow for purchase requisition and purchase order with the necessary screen shots ?
your quick response will be greatly appreciated.
Thanks in AdvanceHi,
Please check http://help.sap.com .
http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92761846f311d189470000e829fbbd/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92775546f311d189470000e829fbbd/frameset.htm
Configuration guides are available in SAP Solution Manager.
Regards,
Masa -
Need to attach document for Purchase requisition usingBAPI_DOCUMENT_CREATE
Hi All,
Requirement:
Attach document(PDF,TXT etc) for purchase requisition using BSP service.
For this i am finding one function module "BAPI_DOCUMENT_CREATE" please suggest me how to use this function module or its working my requirement or not.
if it possible provide any sample code for BAPI_DOCUMENT_CREATE
So that i can move to another why.
Thanks in advance.
Regards,
Rajeshv.Hi,
Did you check the function module documentation. It contains one example also. Please check that.
BAPI fm BAPI_DOCUMENT_CREATE is internally calling this BAPI. Please check how it is calling.
Please alos check program LWPLGF06. I think it has similar code.
Thanks,
Ramakrishna
Message was edited by: Ramakrishna Prasad Ramisetti -
Can't use Overall Release for Purchase Requisitions
I have two groups, AA and ZZ. Each group has it's own Class.
Group AA uses Cost Center Class (CN) (uses Characteristics Cost Center and Line Amount)
Group ZZ uses Order Class (OC) (uses Characteristic Order)
I have built one and only one Release Strategy for each of these Groups. These Strategies both work successfully when I select the other group to be the group for Overall Release. That is, if I set ZZ to be for Overall Release, then create a requisition, the release strategy for Group AA is applied successfully. However, if I modify the req the strategy for ZZ, does not get applied.
The opposite is true. When AA is set to be for Overall release, then ZZ works. However, if I modify the req, then AA's release strategy does not get applied.
Again, both strategies work correctly when the other Group is set to be the one to use for Overall Release. However, neither strategy works if its group is set to be the one for Overall Release.
What am I missing? I only have two classes, two groups, and two release strategies.SAP Standard system allows only 8 levels of release codes.If client requirement is more than 8 then for excess release codes customisation is done by the technical team (Abapers).Lets take an example of 15 release levels required for a client according to his Business needs then in this case initial 7 codes are customised and remaining 8 release codes are configured in the system.
Release procedure is of two types
Release Procedure without classification
This procedure is applicable only for Purchase Requisitions.
Here PR is released Item by Item only.
Release Procedure with classification
This procedure is applicable to PR,RFQ,Service Entry sheet,RFQ,PO,Contract and scheduling agreements.
Item by Item and Header level releases can be configured
For PR - both item by item and Header level release can be configured
For external purchasing documents - Release is possible only at Header level.
Step 1:
Create Characteristics
In this step we need to create characteristics - conditions to be satisfied for triggering Release startegy.For example client has asked to set release strategy based on 3 inputs.Combination of value, Plant and Purchasing group
1) Total value of PR more than Rs 50,000
create characteristic as "Release_PR_total_value" in transaction code CT04.
Tab - Basic data " Data type --- CURR currency format", "Decimal places - eg. 2 " and "currency eg. INR or USD"
Tab -values key in > 50000 INR
Tab - Additional Data- Table Name "CEBAN" and Field Name "GSWRT"
Tab - Restrictions - class type - 032 - Release strategy
2) Plant
Create characteristic "Release_PR_plant" in transaction code CT04.
Tab - Basic data - Data type - CHAR; Number of chars - 4
Tab - Values - Key in all the plants for which you are required to configure release proc. eg. 1000,2000,3000
Tab - Additional data - Table name CEBAN and Field Name is WERKS.
3) Purchaisng Group
Create characteristic "Release_PR_PurchasingGroup" in TCode CT04
Tab - Basic data - Data Type - char, Number of chars eg. 3
Tab - values - Key in all the purchasing Groups for which Release proc. is to be configured as required by Client.
Tab - Addnl Data - Table Name CEKKO and field name - EKGRP
Step 2:
Define class in transaction code CL02
Menu path SPRO>Materials Mgmt>Purchasing>Purchase Requisition>Release Procedure>Procedure with Classification>Edit classes
Here we assign all the above created Characteristics to a CLASS so that a release strategy to be triggered when all the conditions are met.
Create a new class with free choice of names as "PR_Release_proc" in transaction code CL02.*Key in the class name and select class type as 032 - RELEASE STRATEGY then click on symbol create to enter all the details as mentioned below.
Tab - Basic data - Enter description as "PR_Release-Proc",
status- Released, Same classification - check the push button - Warning Message
Tab- CHAR Enter above created 3 characteristics
1.Release_PR_total_value
2.Release_PR_plant
3.Release_PR_PurchasingGroup
step3:
Menu path is
SPRO>Materials Mgmt>Purchasing>Purchase Requisition>Release Procedure>Procedure with Classification>set up procedure with classification>
here define
1.Release Groups
Release group 01 is used for Purchase requisitions and 02 for Purchase orders.
Here assign class "PR_Release_proc" against release code "01"
check "OvRelPReq" indicator for over all release (All line items )of document in one shot else it will be released line item wise.
2.Release codes
Release codes are assigned to Release groups, in Workflow these release codes are tagged to users' SAP IDs through which they will be able to approve or reject a PR in SBWP(Inbox in SAP Business workplace.
PRs are released by users in transaction code ME54N.
Eg
Type of user - Level - Release code
PR creator - clerk or Business user -
Approver - Supervisor - R1
Approver - Project Lead - R2
Approver - Asst. Manager - R3
Approver - HOD/General Manager - R4
Release codes R1 to R5 are assigned to corresponding users.Manager R4 can only approve the PR if prior approvals till R3 are completed else not in ideal situation.
For detailed info please refer
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
3. Release Indicator:
Release indicators show the release status of a Purchase Requisition.
For detailed info please refer SAP Help official site
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
4.Release Pre requisites:
These define the order in which individuals or departments release the PR in sequence.
3.Release strategies
Create a new release startegy eg ."A1" or "U1" , write its description PR release for value >1 lakh
Now select release codes according to the Chart of Authority set by your client.
Eg.
Release startegy " A1 - PR release for value >1 lakh"
R1 - Supervisor
R2- Project Lead
R3- Asst. Manager
R4- General Manager
Now click on" Release Prerequisites "push button and check all the boxes in ascending order.Save the document
click on "Release statuses" push button, check release statuses then click on "Continue" push button.
In third push button you can maintain CLASSIFICATION data or later you can directly mainatain in transaction code CL20N for this strategy.
Classification data for example
1. Value - > 100000
2. Plant - 1000,2000,3000 etc
3. Purchasing groups - 101,102,103 etc
By clicking on "Release Simulation" push button you can check whether release is getting affected for configured release codes or not.
In this way you can configure all the required Release startegies.
Now create a PR in T code ME51N with the above conditions then a new tab will appear in PR creation screen at the time of check.Save the document and this can be released by respective users in TCode ME54N.
Tcode - ME54N - For Individual Release
Tcode - ME55 - For Collective Release
For detailed info please visit SAP HELP website
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
Regards,
Indranil -
OCI call starcture for Purchase requisitions trans NME51N
Hi,
I am looking for any documentation on the OCI call structure ('Web service') for PO/Requisitions.
This it allow accessing external catalog via transaction NME51N using ERP 2005 PR/PO. The only documentation I have seen is related to the SRM EBP and OCI, which works fine for our SRM side.
But for integration with Purchasing via OCI we notice that the HOOK-URL value is NULL, so we do not have the return URL to the calling application upon the completing the catalog shopping,
KevinHi Kevin,
The only OCI documentation I know is about OCI version 4.0.
You are right that only SRM customizing is detailed.
For the return URL in parameter HOOK_URL, its content should be populated by the calling application (SRM, MM or PM).
That's why we must leave it blank in SRM catalog calling structure.
But in MM or PM, I don't know where it is handled.
Rgds
Christophe -
Creating structured texts for purchase requisitions
Hello,
I would like to know if it's possible to define structured texts for purchase requisitions. By example, the item text would be like this :
Building :
Room :
and the user should only complete the missing information.
Does anybody have an idea on how to realize this ?
Thanks in advance.Hi,
It is not a simple thing to do.
The item text comes from the material master (if you are using one) and so you could easily have the text for that as "Building Room" and the material text can be changed (if you configure the system correctly) so they could just add the information.
But you are limited to the size of the material text and so many people just use a non-material approach and manually key in the information in the text options rather than the Item text on the requisition line on the main screen. But in this case it is not a standard option to preformat the text as you require.
It is almost as if configurable materials may help, these use the classification function and so they have characteristics, it would be easy enough to have a characteristic for room and one for building. The user would then be prompted to enter just the values for each and so it would do exactly what you need.
But I don't have enough detailed experience of configurable materials to know for sure that you could use them like this, perhaps someone who knows them well could confirm if this would work?
Whatever happens it is not a simple standard option, but SAP is very flexible and so there may be a reasonable work-around option.
Steve B -
NO Approved found for Purchase Requisition
HI,
we have a case, employee belongs to company B and raising the PR for company A. when he / she was initiating the PR. it says "NO Approved found for Purchase Requisition". we are following the Position Hierarchy. we have only one hierarhy for the two companies Can only please let me know how to sort the issue.
regardsHi,
Are you using positional Hierarchy for approval for your Purchasing? Please check what is the final approver's approval limit/Position
and how much he can approve ?
You will get "No approver found" when system failed to find a approver based on the amount/position in your PR/PO.
Moreover, Please review the following MOS doc.
How To Diagnose Deferred Purchase Order And Requisition Workflows? [ID 884391.1]
How to Diagnose No Approver Found (Document Status Remains Incomplete with No Action Taken) and Build Default Approval List Failures in the Purchasing Approval Workflow [ID 295153.1]
HTH
sd -
User exit/BADI for Purchase requisition through release of Process order
Hi ,
i need to add some text to the Pur Req.
The Pur Req will be created THROUGH the release of PROCESS order. Please let me know any exits are available for the same.
regardsHi
Check the following Exits and BADI for Pur Requisition
Enhancement
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MM06E011 Activate PReq Block
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
Business Add-in
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Custome
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_PURCHDOC_POSTED Purchasing Document Posted
SMOD_MRFLB001 Control Items for Contract Release Order
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_REQ_POSTED Purchase Requisition Posted
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_BSART_DET Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN Commitment for return item
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CHECK_OA Check BAdI for Contracts
Reward points if useful
Regards
Anji -
How do I enter Document Type for Purchase requisition IDOC
Hello,
File - IDOC (PREQCR.PREQCR02)
The file is getting picked up and shows up a checkered flag in Moni..
but in WE05, on R3 side, i see an error message
"Enter Document Type"
How do I enter document type for Purchase requisition IDOC?
will that solve this issue?
thanks and regards
Nikhil.Hi,
For error 51, you need to set the default document type in the inbound processing FM of the IDOC
Standard type - NB
Subcontrator type
Blank PO
Service PO
Stock transport PO.
Document types is used for below things,
1. It controls the no. range of the document i.e. the doc no.
2. It controls whether doc no. is auto assigned or manually entered
3. It controls the field status of the doc header fields i.e. whether input is mandatory or optional
4. It controls the physical doc filing
Thanks
Swarup -
Release strategy for purchase requisition does not kick in
Hi Gurus!
I've been struggling with this issue for some weeks now.
I have set up the release strategy configuration for purchase requisitions with classifications.
However, if I create a purchase requisition the release functionality is not taken into account by the system.
See below some more information regarding my configuration:
1. I've created a new characteristic "REL_PR_GROUP". Status: released, Multiple values, Number of Chars 3, 7 values (TR1, TR2, TR3....TR7), Table name: CEBAN, Field name: EKGRP, Procedure for value assignment set to not ready for input.
2. I've created a new class: "REL_PR_ANPC". Class type 032, Status: released, Same classification: do not check, Char: "REL_PR_GROUP"
3. I have one release group "T1", Rel. object 1, OverReqRel is marked, Class: "REL_PR_ANPC"
4. I have 5 release codes. Grp: T1, Code: 01....05
5. I have 2 release indicators:
"R = Released", Rel. for ordering is marked, Changeabil: 4, Value chgs. 100,0
"X = Blocked", Changeabil: 4, Value chgs. 100,0
6. I have 1 release strategy:
"T1 with Grp T1"
- one release group, 01 Manager
- release prerequisites not applicable because of only one release group
- release status, nothing marked = blocked, 01 marked = released
- classification, purchasing group is TR1 or TR2 or TR3 or TR4 or TR5 or TR6 or TR7
I intentionally kept the configuration as simple as possible so I can try to get it working first.
Now if I create a purchase requisition for an item with release group T1, I would expect the release strategy to be activated. However, this is not the case. I don't see the "release status" tab in the PR, and if I try to relase via ME54 the system says the PR is not relevant for release.
Could you please assist in getting this working?Hi,
Have you checked in CL30/CL30N if your release strategy is derived successfully?
See section 3 of Note 365604. A small section of it:
You can use transaction CL30 search for an object using the data
of the purchase requisition/purchase order. Here, it is important
that the object search determines exactly one strategy. If this
is not the case, this indicates that there are overlapping
strategies in the system or that the release strategies in
Customizing do not correspond with those from transaction CL24.
See the previous point. If the object search returns more than
one result, the system subsequently determines an incorrect
release strategy or no release strategy at all.
If it is derived successfully, next, check the user exit EXIT_SAPLEBND_001 as per Note 371667:
The following assignment statement has to exist within activated SAP
enhancements M06B0002 (include zxm06u13) and M06B0005 (include zxm06u31)
for purchase requisitions:
E_CEBAN = I_CEBAN.
Regards,
Purnima. -
No selectable items exist for purchase requisition l_banfn
Hi,
While creating PO with ref to PR getting the below error :
no selectable items exist for purchase requisition l'banf .
Checked if the PO is created, its not created,.
checked if the item is blocked/cancelled/deleted. Nothing is set.
PR looks fine. Dont know if any authorization data is missing?Check the status tab in ME53N whether all the qty in PR are already used up
Or
Check the line item in PR whether it is deleted
Edited by: Karthik on Jul 20, 2011 12:37 PM -
Table for Purchase Requisition Item Text
I would like to know, what is the table which stores the item text in tab texts for Purchase Requisition?
Hai,
the table is STXH.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = IT_STXH-TDID "ID
LANGUAGE = IT_STXH-TDSPRAS " LANGUAGE
NAME = IT_STXH-TDNAME
OBJECT = IT_STXH-TDOBJECT
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
IMPORTING
HEADER =
TABLES
LINES = L_LINES
Regards,
Venkat -
Regarding report for purchase requisition
Hi gurus,
I am preparing a report for purchase requisitions using SQVI. I am almost done with it but I was stuck at one thing. Our client criteria is to see it by name like they wanted users to view only purchase requisitions they created. They dont want all users to see purchase requisition created by other users. I dont know how to do that. Can anyone help me out with that.
let me know if I am not clear about anything.
Thanks in advance.
Ravi Teja BoppanaHi,
I added the field ERNAM from table EBAN. But the problem I am facing with it is any user can enter any user name in that field. Either I need that feild to be filled automatically with the username who logged in so that I can hide that field if that can be changed or filled automatically and cannot be change by user. Is there any option I can do like that. If I create a report in SQVI no one else except me can see that report, so I need this report in that manner.
Let me know if i am not clear,
Thanks in advance,
Ravi Teja Boppana
Maybe you are looking for
-
Adding video to a .swf file created in InDesign so it will work as a PDF.
I am having trouble inserting a video into my indesign file. I change the format to a .FLV and then export it as a .swf. When I bring it into Acrobat to create a PDF the video does not play. Any suggestions on how to add video to a .swf file that wor
-
How do I sort photos WITHIN folder view?
Okay, I'll admit, to me, Adobe has always been defined as "too many features and too confusing to me," but I'll give it a shot. I looked through help, etc. and I have a seemingly simple question - how do I sort photos, new to old, WITHIN folder view
-
I need to update my ARD admin from 3.6 to 3.7 but client is at 3.8 and it errors out. How do I work around this?
-
ASM and CONFIGURE RETENTION POLICY TO REDUNDANCY 1
I have a 11gR2 database in Linux. ALL the database files (including ARCHIVELOGs) are in ASM. I'm configuing and using RMAN in order to backup the DB & ArchiveLogs. I have "CONFIGURE RETENTION POLICY TO REDUNDANCY 1" configured. Please help me underst
-
Google won't work in Safari but works in FireFox?!
For the past couple of days, after doing a few searches in the Google search bar, it suddenly stops working and I get the following error message instead of Google: Safari can't open the page "http://www.google.com/" because it can't find the server