Building own schemas in Seeburger bic mapper

I'm consulting for Utilities industry and looks like Seeburger does not have custom schemas for this industry type. Using standalone software bic converter and mapping designer, is it possible to
1. build custom schemas from standard EDI X12.
2. and once I build custom schema, would this be saved as xsd?
3. can this xsd be used to convert / map to an IDoc (xsd) using bic mapping designer.
4. does this come with Seeburger adapter cd or a separate cd (free / with cost)?
5. Finally, its latest version number?
I know I have several questions. Please let me know...I will reward them handsomely
Please send me answers and not links to documents. I get totally confused and lost with these Seeburger documents!
Thanks,
Pam

Hi,
1. build custom schemas from standard EDI X12.
Yes you can build custome schamas as per EDI Industry standards. Also we can have the pre standard schemas after installing the seeburger on server.
Also you can get exact manuals from the server/vendor.
2. and once I build custom schema, would this be saved as xsd?
Yes you can use it.
3. can this xsd be used to convert / map to an IDoc (xsd) using bic mapping designer.
See in general ,BIC / some edi converter can be used to generate the xsd.And also you can map the BIC mapper , if you use then you have to configure the eeburger adapter with bic modules.
4. does this come with Seeburger adapter cd or a separate cd (free / with cost)?
I hope Yes. you can have , but some cost.
5. Finally, its latest version number?
Vendor specific.
I hope you can have all seeburger links in your previous forum question.
I have given lot of links.
Regards
Chilla..
Points rewarded if it is helpful..

Similar Messages

Seeburger BIC Mapper

Dear experts,
Would you know whether BIC Mapper can manipulate the page encoding in their level? We have a scenario here wherein, the UNOA was sent by the customer, which will nake the data to be 'all caps'. However, the ideal scenario is that it should be not in 'all caps' (combination of small and large caps). Using UNOA, it will all be in all caps.
Can BIC Mapper ignore that UNOA field?
Kindly advise.
Thanks,
Gerberto

You can try changing the encoding using parameter srcEncoding in BIC MD. UNOA is part of encoding ISO 646. You may try to set this source encoding parameter to UTF-8 and try.
You can check Seeburger documentation about BIC MD to see how to change it. To brief it, you have to open your mapping and check properties of that mapping in BIC MD. After the change, it has to be redeployed.
Regards,
Prateek Raj Srivastava

Seeburger BIC mapper - CRLF as the segment delimiter

I am trying to configure an E2X AS2 scenario using Seeburger adapters but the sender AS2 channel is failing. I receive the error "Length limit exceeded - no SEG. delim. found!!!" during the BIC mapping step. The format of the message I am receiving from the vendor has no segment delimiters and the different segments are simply on separate lines of the message. The fields are delimited with asterisks.
If I add ~ at the end of each line, and delete all of the CRLFs so that the entire message is on one line, the BIC is able to successfully map the EDI message to XML.
Without having the vendor change the format of the file, what can I do to configure the Seeburger adapters to recognize CRLF as the segment delimiter so I can process the vendor's files as they are currently creating them?

Try this in the module chain
localejbs/Seeburger/ReplaceString                  Local Enterprise Bean              key
Then in module key parameter
key         searchString         "\n"
key          replaceString        "~"
Regards,
Prateek

Seeburger BIC Mapping-Small info required

Hi folks,
I am currently working on Seeburger BIC Mapping designer, Are there any forums for Seeburger BIC Mapping related Issues, can we discuss the Seeburger BIC Mapping related issues in this forum.
Please let me know.
Regards,
Varun

hi
check the link related to bic mapping
1./people/nithiyanandam.au2/blog/2008/02/20/handling-edi-interfaces-using-seeburger-bic-modules
2.Building own schemas in Seeburger bic mapper
3.BIC mapping names / classes
4.Seeburger - BIC configured as Module
BR
Kasturika

EDI BIC MAPPER

Can you help me get some information on the Seeburger BIC mapper?
Is it a standalone tool?
What is it used for?
Is it a debugging tool?
Purpose of Sterling Commerce?
Thanks And Regards
Sripathi

Hi,
Please see the below links with above explination
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/135b0b94-0701-0010-f6a9-86a14057544a
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
seeburger adapter configuration
Regards
Chilla

Seeburger bic module mapping parameter

Hi all,
I'm implementing a Invoice02 to 810 scenario, my mapping name in repository is MM_xyz..
But I'm using the standard content of Seeburger...there are lot of mapping transformation..
So do I need to create 1:1 mapping in BIC mapper or can I use See_X2E_ANSIX12_810_V4010 as my mappingName in bic module config...
Thanks,
Srini

>
Srinivas Davuluri wrote:
> Hi all,
>
> I'm implementing a Invoice02 to 810 scenario, my mapping name in repository is MM_xyz..
> But I'm using the standard content of Seeburger...there are lot of mapping transformation..
> So do I need to create 1:1 mapping in BIC mapper or can I use See_X2E_ANSIX12_810_V4010 as my mappingName in bic module config...
>
> Thanks,
>
> Srini
Dont confuse yourself with the data mapping and the BIC mapping.
Note that the data mapping transforms your IDoc XML to 810 EDI XML. Here you have a transformation logic via the business rules. The BIC mapping is nothing but a structure conversion something you can say like FCC in file adapter which will convert the EDI XML to the EDI flat file
The BIC is at an adapter level conversion as it is part of a module. You actual IDOC to EDI XML transformation is done by your message mapping.

Reg: Seeburger BIC Mapping Designer

We are using BIC to resolve hierarchy issue.. As you know we can not pasre more than 2 hierarchy levels in XI.
we have a text file which contains all the records in one row..
<Recordset>
 <Record00> 1-unbounded
 <Field>
 <Field>
 <Record01>1-unbounded
 <Filed>
 <Field>
I did following steps in BIC...
Created Datatype in INHOUSE to user project
Edit structure and save
Export structure (msg_....xml)
Run CreateXMLmessage, source file msg_....xml, target file XML_....xml)
Import XML.xml to User Project
Run CreateMappingXMLToEdi source file msg_....xml, target file X2E_....xml
Import X2E.xml to user project..
Run X2E Map by giving our source text file and output will be in xml.
Problems:
 In 5th Step. while importing XML to user project i am getting auto correction window which is changing field occurances and false to true etc.
 In 8th Step i am getting errors with conversion and i got the output xml file but with default values which i have given while creating datatype.
I have gone thorugh all the links related to seeburger.
I would really appreciate if anyone thorw some light on the same.
Thanks in Advance...
Regards,
Mansoor.

Hi
the steps to generatt the file using the BIC is
1.create the structure in inhouse
2.select the structure you have created , right click then go to the Export, give the destination, the file will be saved at that location.
3.now create the XML message using the create XML Message
4.After creating the XML Message import the XML file .
5. After importing the file the file can be see in the XML node in the BIC mapper for the inhouse structure you have created.
in this way you can create the XML file.
and the created xml file you cam export as XSD,as XML. or as DTD
if you still face the problem please reply me back
Thanks
Rinku

Seeburger BIC mapping designer : querry

Hi,
 We have installed the SeeBurger BIC adapter. I have a querry regarding the mapping that we specify as a parameter to the BIC module in the modules tab of the communication channel.
 Are there standard mappings provided with the installation for EDI -> XML and vice versa , and we simply need to provide the name of the mapping that needs to be used or do we need to develop the mappings from scratch using the BIC mapping designer.
 If the first case is true then how to get the names of all the mappings that are provided so that we can make out which one do we need to use. If it is not so please help me with the BIC mapping designer manual path on the installation as we are not able to figure out the path to the manual.
Thanks in advance,
Pravesh Puria.

Hi Babu,
1."you can use these mappings in "Modules" of your seeburger communication channel."
>> can we use these developed mappings with BIC MD in any communication channel of Seeburger like OFTP,FTP ,AS2 ,BIC or we need to use those mapping with only BIC communication channel?
>>> Yes Babu,You can use this in all communication channel modules .
one thing, "BIC" is not a seeburger adapter type.
You need to deploy BIC Mappings in your XI server.
You have to refer Seeburger manuals for this.
2.lets say if we have developed mappping with BIC MD ,then do we need to develop mapping with XI mapper too or its not needed?but if we do mapping with Xi then data format will be of xml but it needs to be converted to/from EDI ,so how it can be possible just with XI maping and no BIC MD mapping?
>>> No, You Cannot do it in only with XI Mapper.
First you need to use BIC Mapping in modules which will convert your EDIFACT format to EDI-XML.
After this you need to Apply XI Mapping Which will Convert EDI-XML to your IDOC-XML.i.e. your mapping program.
Thanks & Regards,
Akshay Jamgaonkar.
Reward Points For Good Answer .

What is difference bettwen Seeburger BIC and Seeburger BIS

Hi All,
What is difference bettwen Seeburger BIC and Seeburger BIS.
I know BIC is Business Integration Converter(BIC).What is Seeburger BIS?
Regards,
Srini

Hi,
      Srinivas...BIS (Business Integration Server) is also a kind of integration platform which mainy focuses on B2B kind of integration.Its an EDI subsystem generally deal with EDI formats like ANSI,EDIFACT ,ODETTE and many.Jus like an inbuilt graphical mapping designer we have in XI/PI.SEEBURGER BIS do comes with inbuilt mapping designer (In EDI envionment we all it EDI translator) for mapping purpouse and its called (BIC) Business integration Converter.
   XI like any other requires Format conversion utilities called 'Adapters'.SAP instead of developing their own adapters .Relies on third party developed adapters(SEEBURGER,iWAY..etc.).
Especially for Mapping between EDI to XML or XML to EDI .SAP leverages BIC Adapters(ex.,AS2 Adapter) developed by SEEBUGER for B2B integration part of it.
   If you want to kow more on EDI mapping in XI lots many blogs are there in SDN it self.All the very best and go ahead.
Thanks,
Ram.

BIC Mapper Installtion

Hi All,
Where we need to Install the BIC Mapping Designer ????
In XI Server Or in Some Other Server is also Ok ????
Please Let me Know
Regards
Bopanna

Hi Chirag,
My Actual Requirement is we are receiving an edi ANSI X12 850 file from the customer and we need to post that to SAP as IDOC.
This is the sample EDI ANSI X12 850 (PO) file which we received from the customer:
ST850A02937322^
BEG00SABPO 02937322~20071127^
CURSEUSD^
PEREXLEIGH JOHN CWP630-406-3448^
TD5Z~~~SEE 2007 SHIPPING INSTRUCTIONS^
N1BTAGCO1070169594^
N3ATTN: ACCOUNTS PAYABLE1500 NORTH RADDANT ROAD^
N4BATAVIAIL605101398USA^
PERZZTE6308793300^
N1STAGCOZZBPO^
N3BATAVIA RECEIVING1500 NORTH RADDANT ROAD^
N4BATAVIAIL60510USA^
PO1000011700EA2.68PEBP1447031V1VP~51459^
PIDF~~~FILTER^
SCH1700EA~~01020080205^
N9ZZMORE LINE INFO~LINE COMMENTS:^
MSG~PART VENDOR PACKAGED^
MSG~SUPPLIER PACKAGE QTY^
CTT~1^
SE20A02937322^
To let you know we have the Generic Seeburger FTP adapter installed without any VAN. So we have currently installed Seeburger BIC map designer tool in our local system to test the proceessing of the EDI file.
We want to how to create mappings to convert this PO 850(ANSI X12) format to xml which can be used in XI for further processing using BIC mapper and also let us know if this file is been ANSI X12 850 is converted to xml will it process the above mentioned file in XI.
Please let us know the clear steps of how to use BIC mapper tools are we dont have any idea about BIC mapper as well as processing of ANSI X12 messages in XI.
Regards,
Bopanna

Is it possible to change the owning schema when generating datetime dimensions in the datasource?

When creating a date time dimension using the dimension wizard and generate schema wizard, i would like to be able to change the owning schema from dbo to something else. The field is greyed out and I am unable to change it.
Is it possible to change the owning schema when generating datetime dimensions in the datasource?

Hi rkbjr,
Thank you for your question.
I am currently looking into this issue and will give you an update as soon as possible.
Thank you for your understanding and support.
Thanks,
Bin Long
TechNet Subscriber Support
If you are TechNet Subscription user and have
any feedback on our support quality, please send your feedback here.
Bin Long
TechNet Community Support

Seeburger BIC Mapping deployment issue in PI 7.1

Hi experts
We have upgraded from XI 3.0 to PI 7.1 and seeburger is also upgraded to a compatible version.(2.x).
Mappings_user.sda was used in 3.0 environment.
But we are not able to deploy the same in 7.1. I think sda format is not supported in 7.1.
Is there any way to convert .sda to .sca and deploy?
Or how can we generate a compatible deployment file for 7.1?
I have tried using BIC mapping designer,but it shows the option for .sda and .jar only.
Thanks in advanceDhanish Joseph

Hi
I have installed BICMD 632 version and imported .BICMD project file.
Then assigned sda/sca number to it and created deploy file.(Mapping_user00.sda).
Then installed this in PI system using JSPM.
I have tested allmost all the mappings successfully except one in PI system.(EDI 990 message).
When i send data to PI data comes to channel and it shows conversion error. But detailed information not available.
In seeburger monitoring the message goes to recovery mode.
I have used the input 990 X12 and tested in Seeburger BIC MD. And there it is success!!!!!! So i am confused what is happening when it comes to PI system.
I faced some issues>>>
1. while importing project file into BIC MD it asked for apply some autocorrection for one map.(different than this). I have clicked on cancel
2. When i assigned SDA number to my project i have selected 2.1.0 SDA version( 1.8.0 option was also there).
Your prompt reply is greatly appreciated .
Thanks

Seeburger Attribute Mapper

I am using Seeburger Attribute mapper. We need to remap the SFTP filename attribute to a value dependat on the AS2 Message subject.
In my test environment, I have sent a message with the subject of "PROCARD" -- regardless of what message subject is used, value 2 (not-matched) is being set to the dynamic attribute http://seeburger.com/xi/SFTP/dtSubject
Key:                map
Param Name: http://seeburger.com/xi/SFTP/dtSubject
Param Value: if ( subStringRegEx( "PROCARD", @http://seeburger.com/xi/AS2/dtSubject),    "matched", "not-matched")
I have also attempted using asterisk to terminate the search parameter.
Thank you in advance...

The module parameter will have
Source - @Namespace/PropertyName
Target - Namespace/PropertyName
This way you may copy source FileName to target FileName.
Regards,
Prateek

Error in Seeburger BIC Mapping

Hi all,
I am working on Seeburger BIC Mapping Designer.
As i am starting off with it, i have planned to do a very simple scenario File to file.
Source would be an XML and target also would be an xml.
Compilation is fine, but while converting I am gettuing an error
"[Error:ID=2023;LEVEL=1] InhouseDocReader readNextSegment(): offset[4(read Segment : KA\)]: caught ReadingException: Length limit exceeded - no SEG. delim. found!!!
DESCRIPTION: InhouseDocReader causes an ReadingException while trying to read the next segment of current file, abort
<<ErrorStreamEnd>>
Conversion error "
Please let me know what should be done.
Even I have enabled SetIngnoreCRLF option in the source options.
Cheers,
Karthick

Hi Karthick,
Where do you get this error?
In BICMD ?
Have you created the E2X and/or X2E mapping programs in BICMD tool?
Test it locally in the tool intself before deploying the mappings to XI server.
Follow these steps to create a 1;1 mapping for XML to EDI and EDI to XML conversion program:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b66651-eeea-2b10-e5a6-8459ec30d948;jsessionid=(J2EE3414900)ID2060961950DB01298938248398894809End
Regards,
Ravi

How to get the own schema data while calling the other schema's Procedure

Hello Experts,
I'm Sanjit, new to OTN forum.
I'm using Oracle 10g 10.1.0.2.0 database. Another user Sush has created one procedure proc_1 like
create or replace procedure proc_1
as
v_total number;
begin
select sum(amt) into v_total from trans_master where dot
between add_months(sysdate,-3) and sysdate;
dbms_output.put_line('last three months total transactions is: '||v_total);
end proc_1;
He has the Trans_master table and having 280 records and I have the same Trans_master table with 430 records
inserted in last 3 months. He has granted execute privileges on the procedure Proc_1 to me. When I call the procedure
I cannot call it directly like my own schema procedures: Exec Proc1;
I am calling like : Exec Sush.Proc1 to get the result. My issue is: when the procedure is called,
it is accessing the data from the Sush schema Trans_master table with 280 records total, but I want
the procedure to get the total amount of transaction of 430 records from my own Trans_master table.
Please resolve my issue which would be a great help. And is there any way to call the procedure of other schema
by not attaching the owner name of the object with it?
Thanks
Sanjit

Pleast take a look at "Definer's rights and invoker's rights" in the following article:
http://docs.oracle.com/cd/E11882_01/timesten.112/e21639/accesscntl.htm#BABDDCHC
I guess you need to define a stored procedure with "invoker's rights".
If this is what you are looking for will have to define it in the stored procedure that you are going to call.
The syntax is as follows:
create or replace procedure <yourprocedure> authid current_user ...
...or (the following is the default, you don't have to use the "authid definer" keywords):
create or replace procedure <yourprocedure> authid definer ...
...hm

Building own schemas in Seeburger bic mapper

Similar Messages

Maybe you are looking for