Building Permits and Contractor Licensing Applications

Building Permits and Contractor Licensing Applications
Does anyone know any municipal government that uses Peoplesoft for there building permit process or contractor licensing process.
The Bobman
[email protected]

Similar Messages

Clusterware Pricing and/or Licensing Information for 3rd Party Applications

Hi,
Can anyone please direct me to Oracle Clusterware 11g pricing and/or licensing information in the scenario where the Clusterware solution is intended for use with a 3rd party application and not with Oracle Database?
Also, in the case where Clusterware is used with Oracle Database 11g Enterprise, does it require a separate license?
I appreciate if anyone can provide me with a link to this type of information.
Thanks in advance!
Best regards,
Johan

OK - So if there is no RAC installed and you all you need to do is provide Cold failover for an Oracle database instance then yes the Clusterware license is at no charge in this scenario.
briefly :
you install a Clusterware home - as if you were goin gto create a RAC database
then you install a database software home on each node.
then you create the instance.
there is a good paper here : http://otn.oracle.com/clusterware
See : Using Oracle Clusterware to Protect A Single Instance Oracle Database 11g (PDF) February 2008
If the software you are wanting to protect 'talks' to an Oracle database
You can either install on the RAC nodes - using the clusterware that is already there
OR
install Oracle clusterware onto 2 or 3 or more new nodes to build an new application cluster and then install your application.
Either way both meet the terms of the license doc.
Philip...

How to Build and Deploy Flex application in EP6

Hi All,
Can anyone tell how to build and deploy Flex application in EP6.
I want to build a normal application in flex and present it through iviews. How do I configure my Iiview to have flex component running in Portal Environment.
Thanks
Deepak

A good book to start with is Enterprise JavaBeans by Monson-Haefel (O'Reilly press). It covers deployment of EJBs on J2EE servers. Also check out sites specific to your server, sometimes they have specific requirements (like Weblogic).

What does: "A license has expired on the Proxy, and your request is not permitted: "The SGOS license has expired" " mean?

I have an intermittent problem with trying to access www.google.co.uk and www.google.com, I just can't seem to access the sites and get the message:
A license has expired on the Proxy, and your request is not permitted: "The SGOS license has expired"
==
I have tried restarting both my laptop and my ADSL router-modem, but to no avail. Yesterday, I had no problem accessing either site, this just seems to have started this morning.
I do not seem to have this problem with any other web sites, including popular ones such as Facebook, Twitter, Yahoo! or BBC News.
== URL of affected sites ==
http://www.google.co.uk and http://www.google.com

Same here. With tiscali as well. Any luck with their reply.

What to buy? I want to a small amount of product photo editing, build websites, and do some product label graphics. 74 years old and do not want to do the Cloud thing online.

what to buy? I want to a small amount of product photo editing, build websites, and do some product label graphics. 74 years old and do not want to do the Cloud thing online.

Well, the web site building we can get out of the way rather easily: You cannot build websites with any Photoshop related applications. Adobe has other applications for that.
You can still buy the full version of Photoshop CS6 with a perpetual license—no monthly payments and you own it. $700 for the standard version, $1,000 for the extended version.
The Photographer's deal gives you a subscription to both Photoshop and Lightroom for $10 per month, but you never get to own the software. The moment you stop paying, the software ceases to work.
The Cloud thing is not really on-line. It resides on your computer. It only has to call the mother ship once a month or so.
Then there's the bargain-basement priced, emasculated Photoshop Elements, with some hand-holding features.
I'm a septuagenarian too, but then I've been using computers for decades, Photoshop seriously for over twelve years. Photoshop is a professional level application that makes no apologies for its very long and steep learning curve.
Depending on exactly how much editing you need to do to those products shots, you may be satisfied with Ps Elements mentioned above.
There are trial versions for all of the above.

[svn:bz-3.x] 15191: Minor update to the build. xml and only make files write protected with chmod.

Revision: 15191
Revision: 15191
Author:   [email protected]
Date:     2010-04-01 07:06:21 -0700 (Thu, 01 Apr 2010)
Log Message:
Minor update to the build.xml and only make files write protected with chmod.
Modified Paths:
    blazeds/branches/3.x/modules/sdk/build.xml

DyNamic I agree that is sounds like you may be facing a network configuration issue. Please let your network people know that you need access to the following servers and ports to download Adobe applications through the Adobe Application Manager:
ccmdls.adobe.com:443
ims-na1.adobelogin.com:443
na1r.services.adobe.com:443
prod-rel-ffc-ccm.oobesaas.adobe.com:443
lm.licenses.adobe.com:443
In addition for updates to download properly you will also need access to the following servers:
http://www.adobe.com/:80
htttp:///swupmf.adobe.com/:80
http://swupdl.adobe.com/:80
http://crl.adobe.com/:80

What's the difference between a web site and a web application?

I'm stumped trying to come up to a difference between a web site and a web application for myself. As I see it, a web site points to a specific page and a web application is more of some sort of 'portal' to content and information.
But where I'm stuck is that a web application is still viewed through a browser (is it not?) and a web site can still view content dynamically, making the line between web site and application prety gray.
For instance, does a web site using ASP.NET or AJAX (I assume ASP.NET is AJAX's proprietary sibling, if not, ignore ASP.NET AND concentrate on the AJAX), becomes a web application because it can retrieve data dynamically and asynchronously or would a website
using PHP and a CMS be more of a web application because it forms the pages on request, based on the request of the client and its content in its databse?
Or maybe I'm totally wrong here - what differenciates between a web application and a website?
http://support.peopleperhour.com/entries/68630566--C-mon-lets-Watch-The-Other-Woman-2014-full-movie-online-free
https://glossicom.zendesk.com/entries/68643806--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
https://cloudhance.zendesk.com/entries/68115098--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
This is totally personal and subjective, but I'd say that a website is defined by its content, while a webapplication is
defined by its interaction with the user. That is, a website can plausibly consist of a static content repository that's dealt out to all visitors, while a web application depends on interaction and requires programmatic user input and data processing.
For example, a news site would be a "website", but a spreadsheet or a collaborative calendar would be web "applications". The news site shows essentially the same information to all visitors, while the calendar processes individual data.
Practically, most websites with quickly changing content will also rely on a sophisticated programmatic (and/or database) backend, but at least in principle they're only defined by their output. The web application on the other hand is essentially a program that
runs remotely, and it depends fundamentally on a processing and a data storage backend.
http://support.peopleperhour.com/entries/68125597--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
https://cloudhance.zendesk.com/entries/67541393--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
http://support.peopleperhour.com/entries/68168787--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
https://glossicom.zendesk.com/entries/68161538--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
There is no real "difference". Web site is a more anachronistic term that exists from the early days of
the internet where the notion of a dynamic application that can respond to user input was much more limited and much less common. Commercial websites started out largely as interactive brochures (with the notable exception of hotel/airline reservation sites).
Over time their functionality (and the supporting technologies) became more and more responsive and the line between an application that you install on your computer and one that exists in the cloud became more and more blurred.
If you're just looking to express yourself clearly when speaking about what you're building, I would continue to describe something that is an interactive brochure or business card as a "web site" and something that actually *does something that feels
more like an application as a web app.
The most basic distinction would be if a website has a supporting database that stores user data and modifies what the user sees based on some user specified criteria, then it's probably an app of some sort (although I would be reluctant to describe Amazon.com
as a web app, even though it has a lot of very user-specific functionality). If, on the other hand, it is mostly static .html files that link to one another, I would call that a web site.
Most often, these days, a web app will have a large portion of its functionality written in something that runs on the client (doing much of the processing in either javascript or actionscript, depending on how its implemented) and reaches back through some
http process to the server for supporting data. The user doesn't move from page to page as much and experiences whatever they're going to experience on a single "page" that creates the app experience for them.

...can i make as many iweb websites as i want? ...and as many blogs as i want? ...i have never made one before....
....although, i do have my own small business and i do have a website that i paid a guy to make and also host....(which is a waste of $$$$ in my opinion as i think i can do a better job making one myself through iweb) ....
...anyways, i know it is splitting hairs but what exactly is the diff b/w a blog and a website ....i am under the impression that a blog is just a personal newsletter sort of thing,...?

SSO for SAP and Non-SAP applications without Enterprise Portal

Dear all,
Is it possible to implement SSO for both SAP and non-SAP applications without involvement of EP at all?
I have gone through this link.
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/e5/4344b6d24a05408ca4faa94554e851/frameset.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/e5/4344b6d24a05408ca4faa94554e851/frameset.htm</a>
But I still i am not able to get the precise answer on how to enable SSO for both SAP and non-SAP applications without EP.
We have decided not to implement EP in first phase of SAP implementation. But we need to enable SSO for other SAP and Non-SAP applications.
A detailed description on how to deal this kind of scenarios will be helpful.
Thanks.

A client of our's uses SAP Enterprise Portal, and is using the SAP SSO, which is implemented with tickets, and requires the use of SAPSECULIB. My company provides an application for this client, and our application in hosted in our data center for the client, as a Software as a Service application, obviously across the internet. Our client, which owns a SAP license, has asked that we support the SAP SSO as a non-SAP SSO application. The client user's SSO ticket will be created from SAP EP, and then passed across the internet to our application, and we are to use that SSO ticket as an authentication ticket to our application. I beleive I know how to do this work technically, having reviewed the SAP document named: "Dynamic Library for Verifying SSO Tickets in Third-Party Software" Specification Version 2.00 December 2005.
My question is, does my company have the right to use the SAPSECULIB? Where is the official download and license download, that indicates we can download this library, and use it to support a SAP customer? We do not own a SAP license. Thank you for your help. I have searched many places in SAP support.

ESET NOD 32 cannot scan past this point. I keep getting stuck at 56% at the following; C:\Documents and Settings\Owner\Application Data\ Mozilla\Firefox\Crash Reports\Pending. Is this a problem with NOD32 or with Firefox? Thank you.

I ran into a glitch on my system that I tried to fix myself. My NOD32 was always showing the yellow warning circle as my protection status when I started my computer. I tried to fix this every way I new how.
Then I started to get pop ups asking me to fix and then send system error reports to Windows. Some stating they were '''''critical.''''' So I sent NOD32 the e-mail below.
'''Me:''' I cannot seem to run a complete system scan. I keep getting stuck at 56% at the following point. C:\Documents and Settings\Owner\Application Data\
Mozilla\Firefox\Crash Reports\Pending
I also keep getting messages to send error reports to Microsoft constantly. I also have this code C:\pagefile.sys-error opening
Thank you for your assistance.
'''Their solution:'''
Based on the information you provided, we recommend that you upgrade to latest version of ESET NOD32 Antivirus and see if this makes a difference.
Please click or copy/paste the following ESET Knowledgebase article into your web browser for step-by-step instructions:
'''Me''' : I did as they requested and am fully upgraded and licensed with their new edition.
Ran a new scan same problem.
I sent them a new e-mail but now wonder if it is a Firefox issue as, C:\Documents and Settings\Owner\Application Data\
''Mozilla\Firefox\Crash Reports\Pending'' this is where the scan stalls.
Any help would be appreciated.
Thank you.

Try delete the files in Pending folder and make the scan again, do not be afraid to delete the files see : https://support.mozilla.org/en-US/questions/679996
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

App-V 5.0 no longer allows a manual or automatic publishing refresh to add and/or remove applications

We just received confirmation from Microsoft that there has been what we deem a major behavior change in App-V 5.0 from 4.x. With 4.x you could add a user to an AD group that is assigned to a virtual application then on the client machine the user could
right click the App-V icon in the system tray and choose 'Refresh Applications' and the app's icon would appear immediately. You could also wait for the configured automatic refresh time and the app's icon would be added immediately. Same applied is you
removed a user from an app group.
This is no longer the case in App-V 5.0 as there is only one way to get app to be added or removed from client and that is to have them log off and log back on. Like many organizations, we have users who do not routinely log off/log on, they just lock
their PC and unlock it. These people would never get a new app added or removed!
In the 5.0 client there is an 'update' button, but all this does is apply any changes to an already assigned application such as if you changed the icon name, and that only occurs after the default 10 minute publishing server to management server refresh
has occurred (although you can change this from 10 minutes to something lower).
My point is, in 4.6 you could add a user to a group and have them click refresh and the user had the app immediately or tell them to continue working normally and the new app icon would appear within an hour. We opened a case with premier
support and they confirmed that this behavior change is expected, although the engineer sounded shocked that this was the case and he seemed surprised this had not come up yet. Also, I recall that at TechEd 2010 the App-V team demoed the beta version
and one of the things the did was add a user to a group, click the then named refresh button and the app would appear.
As I mentioned above, in the RTM build this button has been renamed to 'Update' but its not just a name change, but a complete change from 4.6 and the 5.0 beta 1. I have been unable to find any documentation from Microsoft pointing out this major
change in behavior, and the fact that a member of the App-V team that authored the KB about server publishing refresh times in App-V 5.0 was surprised to realize this change (see
http://support.microsoft.com/kb/2780177) Is it just me or is this a major issue with 5.0?
This will prevent us from migrating to 5.0. Any one know of a workaround or some other option? If you want to see what I am talking about, log onto a machine with the 5.0 client, add yourself to an App-V 5.0 app group that you are not already
a member of, do not log off and you will see that you never get the app on your client. What a few hours if you want, it won't show up. Lock the machine and unlock it. Still now new app. Now log off and log back on and only then will you see the new
app show up. You can repeat this by now removing yourself from the group and waiting. The app will remain there until you log off/on.

We just received confirmation from Microsoft that there has been what we deem a major behavior change in App-V 5.0 from 4.x. With 4.x you could add a user to an AD group that is assigned to a virtual application then on the client machine the user could
right click the App-V icon in the system tray and choose 'Refresh Applications' and the app's icon would appear immediately. You could also wait for the configured automatic refresh time and the app's icon would be added immediately. Same applied is you
removed a user from an app group. This is no longer the case in App-V 5.0 as there is only one way to get app to be added or removed from client and that is to have them log off and log back on. Like many organizations, we have users who do not routinely
log off/log on, they just lock their PC and unlock it. These people would never get a new app added or removed! In the 5.0 client there is an 'update' button, but all this does is apply any changes to an already assigned application such as if you changed
the icon name, and that only occurs after the default 10 minute publishing server to management server refresh has occurred (although you can change this from 10 minutes to something lower). My point is, in 4.6 you could add a user to a group and have
them click refresh and the user had the app immediately or tell them to continue working normally and the new app icon would appear within an hour. We opened a case with premier support and they confirmed that this behavior change is expected,
although the engineer sounded shocked that this was the case and he seemed surprised this had not come up yet. Also, I recall that at TechEd 2010 the App-V team demoed the beta version and one of the things the did was add a user to a group, click the
then named refresh button and the app would appear. As I mentioned above, in the RTM build this button has been renamed to 'Update' but its not just a name change, but a complete change from 4.6 and the 5.0 beta 1. I have been unable to find any
documentation from Microsoft pointing out this major change in behavior, and the fact that a member of the App-V team that authored the KB about server publishing refresh times in App-V 5.0 was surprised to realize this change (see
http://support.microsoft.com/kb/2780177) Is it just me or is this a major issue with 5.0? This will prevent us from migrating to 5.0. Any one know of a workaround or some other option?
If you want to see what I am talking about, log onto a machine with the 5.0 client, add yourself to an App-V 5.0 app group that you are not already a member of, do not log off and you will see that you never get the app on your client. What a few hours
if you want, it won't show up. Lock the machine and unlock it. Still now new app. Now log off and log back on and only then will you see the new app show up. You can repeat this by now removing yourself from the group and waiting. The app will
remain there until you log off/on.

SOLUTION: Building the Flex 2 FlexStore application in Flex 3

I gave step by step instructions on building the Flex 2 FlexStore application in Flex 3 as a post in the Adobe Flex 3 Cookbook:
http://www.adobe.com/cfusion/communityengine/index.cfm?event=showdetails&productId=2&postI d=15606&loc=en_US
If you don't want to go there, here are the instructions:
1) Download the Adobe FlexStore archive flexstore.zip file.
    - go to http://examples.adobe.com/flex2/inproduct/sdk/flexstore/flexstore.html
    - right-click the application and select View Source
    - click the "Download source (ZIP, 1769K)" link in bottom of the left-side-bar
2) Create a directory "flexstore" somewhere on your harddrive
3) Extract the contents of the flexstore.zip file to the directory flexstore you
   just created. The directory flexstore should now have these top-level contents:
       assets           (directory)
       data             (directory)
       productsView     (directory)
       samples          (directory)
       AC_OETags.js     (file)
       beige.css        (file)
       blue.css         (file)
       build.bat        (file)
       build.sh         (file)
       flexstore.html   (file)
       flexstore.mxml   (file)
       HomeView.mxml    (file)
       main.css         (file)
       ProductsView.mxml    (file)
       README.htmlSupportView.mxml   (file)
4) Launch Flex Builder 3.
5) Select File - Switch Workspace and change the workspace to the directory
   containing the directory "flexstore" you created.
6) After Flex Builder re-launches, create a new Flex Project named "flexstore":
    - ensure the "Web application" radio button is selected for "Application type"
    - click the "Next" button, not the "Finish" button
    - click "Next" again in the "Configure Output" screen
    - ensure the "Main source folder" TextInput has "src" in it
    - ensure the "Main application file" TextInput has "flexstore.mxml" in it
    - click the Finish button
7) Drag all the unzipped files now visible in your Flex Builder "flexstore" project
   folder to the "src" folder Flex Builder created for you, and click "Yes" when
   asked if you want to overwrite the flexstore.mxml file Flex Builder created for you.
8) In Flex Builder, drag the following folders into the "src" folder:
    - assets
    - data
    - productsView
    - samples
9) Right click file build.bat and select Open With - Text Editor.
    - Remove the following line from the file:
         ..\..\bin\mxmlc.exe %OPTS% flexstore.mxml
    - Edit the following lines, replacing "..\..\bin\mxmlc.exe" with the hardcoded
      path to the mxmlc compiler for the Flex 3 SDK, which on my computer is
      "C:\Program Files\Adobe\Flex Builder 3\sdks\3.2.0\bin\mxmlc.exe". Make sure
      it is enclosed in double-quotes. This will be to build.sh for Mac users.
         BEFORE
         ..\..\bin\mxmlc.exe %OPTS% beige.css
         ..\..\bin\mxmlc.exe %OPTS% blue.css
         AFTER
         "C:\Program Files\Adobe\Flex Builder 3\sdks\3.2.0\bin\mxmlc.exe" %OPTS% beige.css
         "C:\Program Files\Adobe\Flex Builder 3\sdks\3.2.0\bin\mxmlc.exe" %OPTS% blue.css
10) Open a DOS window (Terminal in Mac) and change the current directory to the "src"
    directory on the local harddisk, which for me is:
    C:\aaaFlexApps\flexstore\src
11) Execute build.bat (build.sh on Mac).
12) Ensure beige.swf and blue.swf are created in the project "src" directory.
13) Select Project - Clean to rebuild the project.
14) Ensure beige.swf and blue.swf and all the other files from the src
    directory were copied to the bin-debug folder.
15) You should now be able to launch the application.

Here the fxp project that i export with flex builder 4 -> source-code
Thank's Greg

Flash Builder 4 and PHP

Hi
I was just wondering if you could help me with a problem i'm having. I'm using adobe flash builder 4 to create an application and i have it connected to a php database to populate the data grids. I have three data grids, which are drag enabled and they will be populated from the database. I then have a fourth data grid, which is used to store the data dragged from the other three.
What i want to do is take the data that is dragged into the fourth grid and store it in an array in a php file. Is this possible?
Shell

I also have Flash Builder 4.5 for PHP and the ANT view does not show when going to Window -> Show View --> Other. I could not find it in any of the folders.
However, I was able to add it by hitting Command 3 (CTRL 3 on PC) and typing Ant.

App build is successful but "no application was specified"

Hello, I'm relatively new to the ios developer game and I recently started working with a project that i obtained from the web (Anypic from Parse).
I've followed the developers setup steps and managed to get a successful build in xcode, however once the build is complete I get the message "no application was specified". The simulator opens and loads the default screen (with simulated apps, calender etc) however Anypic does not appear.
Having trawled the net for an answer I've ensured that I have a "build scheme" and that it is configured correctly. I have yet to try loading the app to a device but I thought that it would be best to sort out one issue at a time.
Any suggestions would be most appreciated.
I'm using xcode 5.1.1 on Maverick.
Thank you!

Found the solution for anyone who comes across this issue in the future.
I needed to identify my bundle in my facebook application (and "make this app and all its live features available to the general public").

Deployment failed. Building failed using sun java application server

Hi
am using netbean 6 ,glassfish v2 and sun java application server 9
When am try to run my jsp file am getting Deployment error report with further error given below.
Deployment error:
The Sun Java System Application Server could not start.
More information about the cause is in the Server log file.
Possible reasons include:
- IDE timeout: refresh the server node to see if it's running now.
- Port conflicts. (use netstat -a to detect possible port numbers already used by the operating system.)
- Incorrect server configuration (domain.xml to be corrected manually)
- Corrupted Deployed Applications preventing the server to start.(This can be seen in the server.log file. In this case, domain.xml needs to be modified).
- Invalid installation location.
See the server log for details.
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:163)
at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:104)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor256.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:277)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:460)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:151)
Caused by: org.netbeans.modules.j2ee.deployment.impl.ServerException: The Sun Java System Application Server could not start.
More information about the cause is in the Server log file.
Possible reasons include:
- IDE timeout: refresh the server node to see if it's running now.
- Port conflicts. (use netstat -a to detect possible port numbers already used by the operating system.)
- Incorrect server configuration (domain.xml to be corrected manually)
- Corrupted Deployed Applications preventing the server to start.(This can be seen in the server.log file. In this case, domain.xml needs to be modified).
- Invalid installation location.
at org.netbeans.modules.j2ee.deployment.impl.ServerInstance._start(ServerInstance.java:1270)
at org.netbeans.modules.j2ee.deployment.impl.ServerInstance.startTarget(ServerInstance.java:1224)
at org.netbeans.modules.j2ee.deployment.impl.ServerInstance.startTarget(ServerInstance.java:1035)
at org.netbeans.modules.j2ee.deployment.impl.ServerInstance.start(ServerInstance.java:912)
at org.netbeans.modules.j2ee.deployment.impl.TargetServer.startTargets(TargetServer.java:417)
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:140)
... 16 more
BUILD FAILED (total time: 44 seconds)

Hi,
I've found that if you remove the j2ee-application element related to the enterprise app you are trying to deploy from Sun\AppServer\domains\domain1\config\domain.xml, and also remove your enterprise j2ee-app directory from Sun\AppServer\domains\domain1\applications\j2ee-apps\, it works.
This is not a permanent solution. I get the same error again, when I try to redeploy the application for the third time. Hope someone can help soon!
Thanks.

Pros and Cons of Application Isolation/Multiple server instances?

Hi. I'm setting a new server using ColdFusion Enterprise with Apache to migrate several web application from and old server with ColdFusion 7 server. I'm currently doing research regarding multiple server instances in order to have a separate server for production apps and another for development apps (see http://help.adobe.com/en_US/ColdFusion/10.0/Admin/WSc3ff6d0ea77859461172e0811cbf363c31-7ff 5.html and https://wikidocs.adobe.com/wiki/display/coldfusionen/Using+Multiple+Server+Instanceshttp:/ /). In addition, I'm also doing research regarding application isolation to have separate production application in separate servers. I'm trying to identify all pros and cons for both "Application Isolation" and "Multiple Server Instances" to make a decision on whether I will proceed in applying these techniques. I have found several links that talk about some of the advantages but have not been able to find anything regarding possible disadvantages. Have anyone in this forum has used any of the techniques, and can provide more information/experiences regarding the pros and cons?

Hi Ricardo_Lorenzo,
Whether to go for Multiserver instances or Single server, is totally a user requirement based decison. If a user has Single website, or multiple websites (of the same nature, in terms of functionality), usually the part of same domain, then they would go for Single sever installation. One single instance will handle the requests from all the websites (if there are multiple). There would not be a clustering/failover setup within ColdFusion and can use the ColdFusion Standard or Enterprise version.
On the other hand, if a user has multiple websites, all with different functionality and have multiple applications (may or may not) running, then they can go for Multiserver installation. Each website can be configured with individual instances. Clustering can be done within ColdFusion if needed. One would need an Enterprise license of ColdFusion for the same.
Hope this helps.
Regards,
Anit Kumar

Building Permits and Contractor Licensing Applications

Similar Messages

Maybe you are looking for