Building project api?

just curious if anybody knew of a way to auto-generate documentation/api information for portal projects. Somthing like javadoc, but on steriods. Any help would be apperciated.
Thanks,
-Kevin

Hello zyl7,
Thanks for posting on
National Instruments.
I have attached a VI doing
it. I have used the API for Compiling FPGA VIs and especially the VI
niFpgaCompileVI.vi:
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/
Attachments:
Compile FPGA VI Prog.vi ‏17 KB

Similar Messages

Is it possible to get a count of all the class files in a Flash Builder project?

Is it possible to get a count of all the class files in a Flash Builder project?
Thanks!

Resultsets are one per connection unless you have copied them. Do you have lots of connections are you properly reusing them or at least closing and discarding all references?
See tutorial and Javadoc of API too

Error: The folder does not contain a valid Flex Builder Project.

HI All,
My first Post here. I am new to Flex Hardly 10 days old. I
want to open the flexstore project in flex builder 3 and could not
able to do so.
What I did: file->import->.... got the error msg as
"The folder does not contain a valid Flex Builder Project".
also tried file->import->general->..... same error
msg.
I need your Help guys
I downloaded the sample project from
http://examples.adobe.com/flex2/inproduct/sdk/flexstore/srcview/index.html
Thanks in Advance
SAS
Text

"shakeb66" <[email protected]> wrote in
message
news:gknbn8$av9$[email protected]..
> HI All,
> My first Post here. I am new to Flex Hardly 10 days old.
I want to open
> the
> flexstore project in flex builder 3 and could not able
to do so.
> What I did: file->import->.... got the error msg
as "The folder does not
> contain a valid Flex Builder Project".
> also tried file->import->general->..... same
error msg.
> I need your Help guys
> I downloaded the sample project from
>
>
http://examples.adobe.com/flex2/inproduct/sdk/flexstore/srcview/index.html
Try creating a new Flex project and dragging the files from
the zip into the
src folder. You may find that you need to rearrange things a
bit, depending
on how they set up the project, but this should get you
started.
HTH;
Amy

DNG SDK build project cannot find the xml sdk

On win7/x64. Installed dng sdk and all dependencies per the readme files. xml sdk built OK with vc10 express, as 64 bit static and dll.
But the vc solution for dng_validate has incorrect names for the xml sdk build projects, so it cannot find those components. Specifically it looks for "..\..\..\xmp_sdk\build\vc\XMPCore.vcxproj". the actual paths in the xmp sdk are different and longer, like "..\..\..\xmp_sdk\build\vc10\dynamic\windows_x64". Moreover there is no XMPCore.vcxproj there.
I suppose the real problem may be that the dng sdk project is trying to build it as .net managed code, while the xml sdk was built as open code. So I guess what I am looking for is a way to build the dng sdk open.

I would confirm your post, but I have not found a solution. I wish someone at Adobe would look into this.

Error -17704, Build project failed in CVI

I'm using CVI7.0 with TS3.0.
When I configure the CVI adapter to be in debug mode, the TS uses tscvirun.prj to run an additional instance of the CVI code for debugging. As soon as TS finishes to load this project I get the run-time error:
Build project failed in CVI for the project c:\....\tscvirun.prj.
Error Code: -17704; CVI ActiveX automation server command failed.
Any idea where to start looking?
p.s. This entire project was copied from another pC where I don't have this problem. I did a lot of comparing between configurations of the two pCs but found nothing.
Thanks

Rafi2003 -
Does the original tscvirun project that TestStand installs work with the example on the failing system?
To validate this you may need to repair TestStand so that the tscvirun files are refreshed and try the examples to make sure things are working properly on the system before attempting to use the files from the second system.
If you rerun the insaller, one of the available options will be to perform a repair.
Scott Richardson (NI)
Scott Richardson
National Instruments

[svn:osmf:] 11292: Removing 'libs' as a library path from the Flex Builder project properties.

Revision: 11292
Author:   [email protected]
Date:     2009-10-30 02:28:09 -0700 (Fri, 30 Oct 2009)
Log Message:
Removing 'libs' as a library path from the Flex Builder project properties.
Modified Paths:
    osmf/trunk/framework/MediaFramework/.actionScriptProperties
    osmf/trunk/framework/MediaFramework/.flexLibProperties

Revision: 11292
Author:   [email protected]
Date:     2009-10-30 02:28:09 -0700 (Fri, 30 Oct 2009)
Log Message:
Removing 'libs' as a library path from the Flex Builder project properties.
Modified Paths:
    osmf/trunk/framework/MediaFramework/.actionScriptProperties
    osmf/trunk/framework/MediaFramework/.flexLibProperties

Linking library with flash builder project?

I have a flash builder project going and I have found I need to make various movie clips and sprites in in Flash Pro. Is there a simple way to just link my library from the .fla project to my builder project so I can access the assets made in the .fla?
I'm using the latest version of both software packages.
Thanks!
-SGW

Open your .actionScriptProperties file and set useFlashSDK to false. This will allow you to use your older SDKs. They are managed in the same way as Flash Builder 4.6 when this option is changed.

Load Flex/Flash Builder project in Flash Professional CS5

Is there a way that I can load (or export) Flex/Flash builder project in Flash Professional CS5?
As it turns out we got Flash Prof for our team, but it may look like we actually need Flash builder to build lots of UI related stuff..

Specifically, I want to use flex chart in CS5. Is there a way to do this?
Message was edited by: bart2335658
And flex ui

Bug: Menu option "Build project" is disabled

I have "Build automatically" disabled due to the poor compiling performance of FB (my project has hundreds of classes), and have instead attached a key binding to "Build project" to trigger a build manually.
Unfortunately this option is very often not available, although I have made changes in the project (and saved them).
Yet right-clicking the project, and selecting "Build project" does a build then.
Obviously there is a bug detecting when a build is required or not.

Build project is disabled if you have no project selected in the package explorer/navigator.
Unfortunately, the logic for detecting the project associated with what objecthas focus is not implemented well in Eclipse (see https://bugs.eclipse.org/bugs/show_bug.cgi?id=201650)
That means that if you go to Problems view or switch between editors in a certain way, Build Project gets disabled.
The short of it, it is an Eclipse bug and has been fixed for 3.6 (which is what the next version of Builder ships with).
Thanks,
Anirudh

I want to track progress on my building projects with a tick sheet

Hi All
I want to use a ticksheet to track progress on my building projects.
I have between 10 and 15 projects running simultaniously, I would like to prepopulate the ticksheet and give the tick a value.
So when waking onto a site i would like to just tick work completed then get a % complete and be able to save/output/print etc. with a date stamp.
example:
                              Item value     Total value
setting out                   =1%          1%
digging trenches           =2%          3%
Footing                        =5%          8%
So I will get a grand total% if all ticks are ticked will be 100% if not all ticked the unticked value will be deducted from 100%.
Hope this makes sense.
Thank you

You may wish to repost in iOS apps section for Numbers. Most of
what you want seems doable; I am not sure about date stamp but
it may be doable using presence/absence of tick to make date entry
in a cell.
There are some very capable people answering questions in that
forum who should be able to provide a solution. It will probably
take some setup on your part; but after the initial work, you should be
able to touch a few cells to get the results you desire.

Captivate 4 crashes while working with Power Builder projects..Can anyone help to solve this issue??

Captivate 4 crashes while working with Power Builder projects..Can anyone help to solve this issue??

Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD

Project apis

Hi All,
I am a fresher. I have no experience in oracle apps. can you help me out with
using the APIs in oracle to insert data to Oracle ebs apps? if there is any sort of tutorial or material please do mention
Thanks,
spark

Hi
Take a look on the following article, which may be found on My Oracle Support.
Project API Overview and Reference [ID 1424156.1]
Dina

Is it possible to save versions/snapshots of Flash Builder projects?

Hi there,
I am working on a project at the minute that I am saving incrementally (0.0.1, 0.0.2 etc) as would be expected with most projects. Can anyone let me know if there is a way of saving a snapshot/version of a Flash Builder project so that I can revert back to a particular version should I ever need to? I suppose I can duplicate the project so that it appears as a seperate entity in my workspace window but I was just wondering if there was a more elegant way of doing it?
Thanks in advance for your help.

Setting up a local version control system like CVS or SVN and committing your project at regular intervals will likely give you what you want.

Access Service Builder Project after transport

Hello Experts,
I had created a builder project in SEGW & had also created two web services under this project. Our system refreshes every week & then transports are re-imported on need basis. My GW developments are re-imported. Though all objects are there & service is also working fine, I am not able to find my builder project in SEGW after re-import. I have checked TADIR & entry does exist here. After debugging search help at SEGW, i found out that it seraches a global buffer table if current user has accessed that project earlier.
What would be the way to get my project in SEGW after transport or re-import?
Regards
Gaurav K

Thanks Krishna for your reply.
It was actually an authorization error. That's why i was not able to see my project in SEGW. Thanks
Regards
Gaurav Karkara

Compiling Flash Builder Projects with ant - error

I'm fairly new to FlashBuilder as well as using ant to build projects.
I'm working on a project in FlashBuilder 4.5. I'm using a 3rd party SWC that contains an alchemy-compiled C application in the SWC. Building my entire project within FlashBuilder is working fine. However, due to other parts of the project (not imported into FlashBuilder) I need to build with ant on occasion.
The Class specific to the C app within the SWC is throwing errors when building with ant - it says it can not find the source. I had one recommendation to look into adding/editing something within the build.xml file, but I don't know what that addition/edit would be.
Any help appreciated.

Apparently related to switching workspaces... the error log identifies a path to an old workspace I changed out of weeks ago. I created a new workspace and moved the project (just the source, etc, not the settings) into it. been running fine for a while now... though funny how this problem didn't show up until yesterday.

Building project api?

Similar Messages

Maybe you are looking for