Building to other 2 building

Hello
I Want to connect building represent the H.O with 2 buildings acts as branches using wireless technology ,I have 3 bridges(1200 series) at each site with parabolic dish's now I need a help to design and implement and configure such this project, PDF Describe such this project is very much appreciated
Thanks

Hello,
It is almost impossible to give you a detailed answer without more information about the site... this document may help you:
http://www.cisco.com/en/US/customer/tech/tk722/tk809/technologies_configuration_example09186a008058f53e.shtml
As for the antennas, please keep in mind that your H.O. will need to send and receive from 2 sites, so I am not sure if a parabolic dish, which is very "point to point" (very narrow beam) will be the best one... I would expect more an omni or sector antenna at the HO site, but it depends of course on the distance to the branches.
Have a look at this document, it will give you the antenna beam shapes:
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008008883b.html
Hope it helps
Jerome

Similar Messages

I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected. Please help me out!!

I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected in the other building. This problem was not there earlier but has occured recently. I would also like to mention that none of my other colleauges who uses iphone are not facing this issue. Please help me out!!

Assuming you entered the correct WiFi password for your network, see these articles:
iOS: Troubleshooting Wi-Fi networks and connections
iOS and OS X: Recommended settings for Wi-Fi routers and access points

Change background color - Integration Builder and others

Hello all,
Does anyone know how to change the background color displayed in the Integration Builder and other Java stack components of XI?
We have a company policy that each different landscape (Dev, QA, Prod, etc) has a different background color in order to minimise the risk of mistakes (ie making an entry / setting in the wrong system).
For the SAPGui components this is easy to do (just registry entries), but how can this be done for Java stack components?
Any ideas appreciated (including other ways of highlighting which system you are on if differnt colors are not possible).
Thanks,
Brad

Hi Brad,
can can always have a look
the top tab of the IB tools (IR, ID)
you have server + instance number there
with ID you will have different object names (business systems)
for IR different authorizations (DEV, PRD...)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

IPad build vs iPhone build

hey guys, just in general.
is there any difference between a iPhone build or iPad build (provision profiles, etc.) or is everything the same just connect the iPad and use it as a iPhone like?
thanks

Pretty sure you have better luck w/these types of questions on the DevForums...
https://devforums.apple.com/community/iphone

Flex builder 3 - clean build

I am having problems with Flex builder 3 not building
correctly.
It does incremental builds - to reduce compilation time on
individual changes I assume - but quite often gets it wrong and
produces a whole stack of invalid errors.
I've tried the build clean function but that doesn't seem to
actually perform a full build clean. It only resolves these issues
some of the time. I can mess around with the code - deleting and
then un-deleting lines that are throwing up errors, or sometimes
renaming the main style sheet - which usually fixes it. But this is
a constant drain on my productivity and sometimes no amount of
messing around will help. In those cases only exporting the entire
code base and creating a new project resolves the issue. (I would
guess because this forces a completely clean build)
Does anyone know of a way to either eliminate this problem
alltogether or failing that perform a full clean build through the
builder.
I'm guessing a customised any build script may be the
solution, but I've never created one of these.

jfb, I tried all that but to no avail.
Devtron, am not using SVN ! I'm using the Flex Builder standalone version.
Thanks guys for your replies. I just ran out of patience and just started working with FB4 and all is going great !
Thanks again

Different transitions page build in and build out

is there a way to create different transitions for page build in and build out in indesign?

You are correct - that is not Indesign Terminology. I want to have a differnet page transiton when I arrive at page 2 then when I leave page 2. I want objects to animate in a particula waay when I arrive on page two, and those objects to animate away in a differnet way when I leave page 2. I can't seem to get a button to do animations AND then leave a page.

[svn] 1190: Clean the flex-sdk-description. xml during the clean stage of the build so the build starts from a "clean" state.

Revision: 1190
Author: [email protected]
Date: 2008-04-11 07:06:59 -0700 (Fri, 11 Apr 2008)
Log Message:
Clean the flex-sdk-description.xml during the clean stage of the build so the build starts from a "clean" state.
-Set the antTasks.compiled property if the flexTasks have already been compiled to avoid having a failure when calling ant main checkintests package
Modified Paths:
flex/sdk/branches/3.0.x/build.xml

Somewhere in your pom.xml where you are configuring your build dependancies there will be a line <scope>caching</scope> this line is configuring the build to use a flex runtime shared library. This line is generating the error because caching is not a valid dependancy scope in maven 3 however mojos uses it anyway. There was a defect opened against flexmojos; I've linked it below. Froeder's response to the issue was that it was not fixable, that the warning is expected and that we'll have to live with it for now.
https://issues.sonatype.org/browse/FLEXMOJOS-363?page=com.atlassian.jira.plugin.system.iss uetabpanels%3Achangehistory-tabpanel

Workaround for using the latest nightly SDK 4.0 builds with Flash Builder Beta 2

The latest builds of SDK 4.0 have been updated in preparation for including playerglobal.swc for Flash Player 10.1. Flash Builder Beta 2 can not find playerglobal.swc due to the addition of the {targetPlayerMinorVersion} variable found in the flex-config.xml file.
When using recent nightly SDKs with Flash Builder Beta 2, please modify them as follows:
1) Rename the folder <nightly sdk location>/frameworks/libs/player/10.0 to "10"
2) Edit the file <nightly sdk location>/frameworks/flex-config.xml and remove ".{targetPlayerMinorVersion}" and save
When you restart Flash Builder, we will now find a correct location for playerglobal.swc, allowing for code hints and many other features to work properly.
Jason San Jose
Quality Engineer, Flash Builder

Bump.
As people continue to have problems with the nightly SDK 4 builds and Flash Builder Beta 2, please remember to use the workaround described at the top of this thread. Also see http://blogs.adobe.com/jasonsj/2010/02/workaround_for_using_the_latest_nightly_sdk_40_buil ds_with_flash_builder_beta_2.html.
Jason San Jose
Quality Engineer, Flash Builder

FAQ Builder and Survey Builder Portlet

I am currently using Oracle Portal Version: 9.0.2.2 and am not able to find the FAQ Builder and Survey Builder Portlet.
Is this not shipped with this version?
How can I go about adding these to my pages?

The first version of Portal in which the survey portlet appeared is: 9.0.4.0.99.

If cloak some files in an App would uploaded or not in build.phonegap to build the App?

cloaked files not uploaded...
if cloak some files in an App would uploaded or not in build.phonegap to build the App?

i use dw cs6
http://tv.adobe.com/watch/building-mobile-apps-with-phonegap-build/introduction-to-phonega p-build-building-your-first-app/
why in this video skipps to talk about signing keys? ios, android, blackberry?
when required?
may skipped for paid apps? how get codes to setup for phonegap build?

Keynote: I'm attempting to tweak a presentation I did on my old PC in ppt. When I click build inspector, then build, I do not get an effects drop down window. Please advise

Keynote: I'm attempting to tweak a presentation I did on my old PC in ppt. When I click build inspector, then build, I do not get an effects drop down window. Please advise

Here's the Keynote forum:
https://discussions.apple.com/community/iwork/keynote

Flex Builder 4 == Flash Builder 4

I've seen a ton of blogs discussing Adobe's decision to rename Flex Builder to "Flash Builder" for version 4.0, and wanted to see what you all think.
Personally I agree with many of the blog comments that it is a bad move.
Flex apps are not Flash apps (thankfully), they just happen to run in the same runtime (Flash Player). AIR apps are not Flash apps as well.
I still think Flex will succeed, but are you all looking forward to working in Flash Builder 4?
I for one hope Flex continues to succeed despite this move.

Just recently re-infuriated by this terrible decision on Adobe's part so I located this thread.
On Adobe labs they use this as the reasoning:
If you are new to the Flash Builder beta, the first thing that you’ve already noticed is that we are renaming Flex Builder to Flash Builder. This name change will create a clear distinction between the free open-source Flex framework and the commercial IDE.
So instead of developers (most of which have already learned the distinction by now after TWO versions) having to know the difference between an SDK and an IDE (what kind of idiot developers can't understand this???), now Flash designers (many more of those) and programmers also need to understand the difference between Flash Builder and Flash Professional. They aren't the same product in the least and are barely related, but Flash "newbies" won't know that from the names. Meanwhile Flex newbies will still be confused by the Flex SDK/Flash Builder mismatch.
You would think that Flex devs (many of which come from the Java world which has exactly the same concept of SDK/IDE) who are familiar with software engineering (unlike your typical Flash developer), would be able to overcome this "confusion" more easily than the much larger number of Flash devs.
So now this change is needed, to add even more confusion for everybody involved:
When Flash Builder 4 is released for purchase, the current plan is to name the full-featured edition Flash Builder 4 Premium edition. This change is being made to reduce any risk of confusion between Adobe Flash Professional and Adobe Flash Builder.
If it's already realized that you're just replacing the confusion of Flex newbies with the confusion of both Flex AND Flash newbies... why do it?
Was this some over-paid executive's knee jerk solution to an almost insignificant problem? Given that it seems almost nobody thinks this change is a good idea, perhaps they should have asked (here or elsewhere) their customers what they thought of such a change before simply announcing it and passing it off as a big marketing improvement?
But more importantly: Is it too late to reconsider this idiocy? (I can't wait till Google searches start mixing up Flash Pro and Flash Builder information making it just that much harder to find relevant links!)
If you really want to eliminate the confusion of "Flex Builder" vs "Flex SDK" for the mentally challenged, why not simply rename Flex Builder to a more creative and unique name similar to what Java has in Eclipse/JDK? Heck even calling it FX Builder would have been better than Flash Builder! The marketing dept here needs a serious wake up call IMO.

Is Windows Technical Preview Build 9926 Last Build before Release (PC) ??

As @ Mar 14 2015 - My WIN10 build Installations (9926) no longer have "Preview Builds" option,
in Update & Recovery Menu (PC Settings)
Build 10036 announced by rumour mill...
Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB

Microsoft Community got there first...
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/is-windows-technical-preview-build-9926-last-build/bb0bed43-4d64-4e1b-acaa-fee158f034ce
Thanks Andre da Costa
Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB
We only reply to questions posted in TechNet forums.
We don't go to MS Community and find out if the same question has been answered or not before we post the replies.
There is no such thing as who gets "there" first.

Extension Builder 2.1 'Building workspace' has encountered a problem

Any extension that includes support for CS5, now has a compile error:
'Building workspace' has encountered a problem.
Errors occured during the build.
Any suggestions? there isn't any detail. I created a test extension that is simply defaults for a Creative Suite Extension with support for CS5. An extension that supports later versions has no error. Interestingly, my other build computer has no problem. Problem just started yesterday...

The problem is one has to upgrade to 2.1, either extensions won't work in CC. And creating separate version for CC just because of this is slightly annoying.
mr_erickson wrote:
Interestingly, my other build computer has no problem. Problem just started yesterday...
that's interesting, does Extension Builder 2.1 installation work fine for you on another computer? or it was 2.0?
I've looked at the log, here's what it says.
!MESSAGE Errors running builder 'Adobe Extension Builder' on project 'ha'.
!STACK 0
java.lang.ArrayIndexOutOfBoundsException: 3
          at com.adobe.cside.libsinstaller.hostadapter.HostAdapter.getFilePathForA dapter(Unknown Source)
          at com.adobe.cside.libsinstaller.hostadapter.HostAdapter.getExtBuilderLi bInstallerPath(Unknown Source)
          at com.adobe.cside.libsinstaller.hostadapter.HostAdapter.getPluginLocati onInExtBuilder(Unknown Source)
          at com.adobe.cside.project.APEBuilder.checkHostAdapterPlugins(Unknown Source)
          at com.adobe.cside.project.APEBuilder.build(Unknown Source)

[svn:fx-trunk] 10317: In ASDoc comment, change reference of "Flex Builder" to "Flash Builder"

Revision: 10317
Author:   [email protected]
Date:     2009-09-16 12:56:03 -0700 (Wed, 16 Sep 2009)
Log Message:
In ASDoc comment, change reference of "Flex Builder" to "Flash Builder"
QE notes: -
Doc notes: -
Bugs: -
Reviewer: -
Tests run: - checkintests
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/netmon/NetworkMonitor.as

Can smart builds include other actions? Or can I copy a build?

I have a smart build with dissolves in and out. A few slides do need bullet builds. So far it seems that I'll just have to build the presentation slide by slide in order to incorporate the different builds. Any suggestions?
Also, a possibly related question: can I copy a build from one slide to another? I hoped that copying/pasting the build details would result in the same action for the new slide, but no luck so far. If I could do this, it would expedite the main question, as I could copy the dissolve in/out from Slide 1, then paste it into, say, all 20 slides, then modifying only slide 14.
Thanks,
cb

Sure, Tulse. Say I have 20 slides. I know I can do a smart build that will let them all dissolve in/out, and I can loop it, to let it run on its own. All good. But a couple of the images need to expose bullet-by-bullet. So far, it seems that once I use a smart build, I can't change any individual slides.
Re: copying a build, I'd hoped that the transitions might transfer from slide to slide, as a spreadsheet changes references ("B2+C2" pasted in subsequent rows below becomes B3+C3, B4+C4, etc. So if I'd copy and paste a particular build (dissolve in/out), subsequent slides would adapt likewise, and then for the two exceptions, I'd just build them separately.
If I have to build 18 separate identical dissolves in/out, and two with bullet-by-bullet, I will. I'd just rather see if I've missed some detail that would expedite it.
Thanks,
cb

Building to other 2 building

Similar Messages

Maybe you are looking for