Built a livecd with archiso - can i release it on the internet?

Not sure where is best to ask this so went with newbie.
I've built a livecd with the archiso project to use in my classroom (maths teacher) and some colleagues have expressed interest in having a look, so i thought about making it available for download. then i thought further; what if other people i don't know would be interested?
it's still not quite finished, but it works and has nearly all the software i want in it. when it's finished, is there anything to stop me from legally making it available to download from a blog or something like that? does an archiso creation count as a distro that i can submit to distrowatch? is there anything against me using this as a logo?
sorry to bombard you with questions
thanks for reading

10 minutes to boot up? Was it Windows that was the problem or the school needed to pass a bond issue to upgrade their equipment? Linux can bring life to old equipment of course.
You have a few options (maybe):
Your LiveCD would override your windows installation. I don't like LiveCDs except when I have no choice but to use them and installation of course. Running on LiveCD all the time wears out the already short lived CD ROM drive.
BYOB with ArchLinux and the PXE setup serving your network/classroom. Having the regular computers in the room allows for whatever packages to run on that particular machine on its' own memory.
You could also buy a USB storage device big enough to do what you need and boot one machine from it, complete with the PXE structure. Then all the other ones can boot from it. This way you could stay up to date and a flash drive is somewhat inexpensive. I don't necessarily recommend it as being anymore reliable, but we must all sit down and play xbill!
Last edited by nomorewindows (2012-07-17 23:44:21)

Similar Messages

YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads.

YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads, if it's even loading at all.
I do not know if it's relevant or not, but I got a message on my ipad while on safari saying that my iPhone has a virus. I looked it up and it seems it might have just been an ad from the website I was on, but it happened around the same time YouTube stopped working.

You will find that using the YouTube app will provide a better viewing experience for YouTube videos.

Can no longer connect to the internet with the 580...

Hi, my PC was able to connect to the internet with my 5800 via a USB cable. Now, I can no longer connect to the internet with the 5800 via a USB cable.
I had never tried connecting the computer to the internet with the 5800 via Bluetooth prior to this incident, so I tried that. Strangely, it works.
My question is how come I can no longer use the 5800 via USB as a modem, but how come the 5800 via Bluetooth still works as a working modem?
Sorry, if my sentences are confusing. I have a terrible headache at the moment. While the Bluetooth connection works, I just feel better using the USB connection and knowing that my 5800 has a clean bill of health.
BTW, my PC is on Windows 7 Professional at the moment. I've tried uninstalling the Ovi Suite and reinstalling it, but that didn't work. I've also tried using PC suite instead of the Ovi Suite but that didn't work either. What other options do I have, beside hard resetting the phone? Thanks in advance.
Edit: BTW, the message shown when I tried to connect to the internet with the 5800 USB modem was "failed to establish a network connection".
Solved!
Go to Solution.

Hi,
I am so much tierd by trying to connect my phone to pc.
I have nokia 5800,and I used to connect my phone to PC by USB cable.
But from last 5 days I could not able to connect it.
The problem is that,
when I connect phone to pc,notification comes up that phone connected via ovi suit,but within a minute or 2,
"porable device" icon disappears from the task bar in the right hand corner,so connection could not proceed further.
Please help me in this asap.
I had tried following already:
1.format my PC
2.Installed new ovi suit
now please give me a proper solution on that.
thank you.

Currently using Lightroom 5 as a standalone on a mac and two windows machines one desktop one laptop. with CC can i still use all the machines or do i have to take out an individual license for each?

with CC can i still use all the machines or do i have to take out an individual license for each?

Your LR5 license allows for activated installations on two machines. Of those two machine, only one can be using the licensed software at a given time. The same applies with CC, except with CC you won't be able to sneak in the third machine. What you can do though with CC is have it installed on all three and sign in and out of the different machines as needed.
If you intend to be using all three machines at the same time then you do need three separate licenses/subscriptions to be in compliance with the license agreement.

Only some pages of my website made with Muse can't be edit in the Business Catalyst Admin Console... How access all my pages edit possibilities ?

My website is made with Adobe Muse and published with Business Catalyst.
Some pages can be edit on the Business Catalyst Console, but, unfortunately, some other pages can't.
Why some pages and not others ?
Thanks for yours answers.

Hi,
I have try the edit mode with Firefox and Chrome and no one doesn’t work.
For the french pages, I must reload the page to have the blue blocks. And if I do that on an english one, it switches on the french one...
Caroline Duhamel
+33 (0)6 08 34 33 61
Le 24 oct. 2014 à 09:40, rohit776 <[email protected]> a écrit :
Only some pages of my website made with Muse can't be edit in the Business Catalyst Admin Console... How access all my pages edit possibilities ?
created by rohit776 in Help with using Adobe Muse CC - View the full discussion
Hi,
I have just checked at my end and it seems everything is working fine and I am able to edit even the English version pages.
Can you please try some other browser or in a different system to edit your site and check if you are able to do so.
Regards,
Rohit Nair
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6862093#6862093
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Hello. I need help. I use Photoshop Elements 10 on my MAC but it no longer reads discs. Can I download it from the internet with my original package serial number?

Hello. I need help. I use Photoshop Elements 10 on my MAC but it no longer reads discs. Can I download it from the internet with my original package serial number? thanks

Yes, from here:
Download Photoshop Elements products | 13, 12, 11, 10

When Firefox last automatically updated, it suggested that Adobe reader needed updating, now, with Adobe Reader 8, I can no longer print from the internet, only to file. Help please.

When Mozilla Firefox last automatically updated, it suggested that Adobe Reader needed updating. After updating to Adobe Reader 8, I can no longer print from the internet, only to a file. I know the printer and its interface must be OK because Word prints normally.

Problem solved, it was my oversight, I had not removed the check from the Print to File box in the print set up.

My iPhone 5 won't use 3G when 4G isn't available. I live in the middle of nowhere, but with my iPhone 4 I could use the Internet on 3G just fine. Now I don't get anything unless I'm on wifi. I have AT

My iPhone 5 won't use 3G when 4G isn't available. I live in the middle of nowhere, but with my iPhone 4 I could use the Internet on 3G just fine without needing wifi. Now I don't get anything unless I'm on wifi. My phone says '4G' but then says 'could not activate cellular data' or gives me the gray google failed because you dont have internet page. I have AT&T if that matters. I just want to get Internet and my email like I used to be able to. Slow 3G is fine with me, but I need it to work on my iPhone 5. Can anyone help me?

Oh ok, thank you! So I just got a bum SIM card when I bought this phone or something?

How can I deauthorize a computer that can no longer connect to the internet or is no longer working ?

How can I deauthorize Itunes on a computer that can no longer connect to the internet or is no longer working ?

You can't, which shouldn't be a problem unless you have 4 other computers authorized with the iTunes account and you need to authorize another.
Once you have authorized 5 computers, you can de-authorize all computere from a computer that is currently authorized followed re-authorizing the current active computers that need to be authorized.

WRT54G ver. 6 can no longer connect to the internet after reset

I reset my WRT54G ver. 6 to clear the password, and now I can no longer connect to the internet with it. I can see the router itself from my PC, but that is all. I've followed the directions here for connection problems, but I can't seem to get an IP Address for it in the Web Configuration tool. Anybody have any thoughts?

Since you reset your router, you need to reconfigure it back again. try the online utility that automates the configuration. download Easy Link Connect utility at www.linksys.com/connect then download "Netset" and follow instructions.
if not Easy Link connect didnt work then you need to do the configuration manually.
1. check physical connection modem should be connected wired to internet port of the router then PC to numbered ports of the router.
2. Brighthouse i believe is cable connection, right? try power cycle your devices (turn off modem and router then turn on modem 1st then router next). check if your online.
3. if not. check PC ip. click "start" then "run" type in "cmd" then press "OK". the command prompt should pop-up. type "ipconfig" and check IP and gateway. you should be getting an ip: 192.168.1.x and gateway: 192.168.1.1
4. access router. open IE, then type in http://192.168.1.1 on address bar.
5. you will be prompted with username and PW. "admin" is the default password. on setup, just below are subtabs. select "MAC address clone". in it, set "mac clone" to "enable" then click on "clone" then "save settings".
6. power cycle devices again. try to go online
note: if you dont have latest firmware. try updating if needed
Message Edited by whodas on 11-07-200601:28 PM
it is EVIL enough for GOOD men do NOTHING.

IMac Can No Longer Connect to the Internet

My parents use a 2006 Intel Core Duo iMac (the 17", 1.83GHz model) running OS 10.6 (Snow Leopard). They typically connect to the internet using a wireless network set up using an Airport Extreme with RCN as their ISP.
As of yesterday, the computer can no longer connect to the internet, while all other computers in the house, both Mac and PC, still can. I've tried power cycling the modem and the router, connecting using ethernet, and connecting the computer directly into the modem. Thus far, none of these attempts have succeeded. I've taken a look at the network settings for the computer and while networking is most certainly my thing I wasn't able to detect a change. As a last ditch attempt I tried using Google's public DNS service, rather than RCN's default, but that made no difference, so I've reverted it.
I realize that the information available in this thread is almost certainly too little to guess at what the problem might be, but I'm more than happy to fetch information that might be helpful in finding a solution.
Thanks for taking the time to read the problem; hopefully there's an obvious solution.

JJ247 wrote: I typically say a restore would correct any software issues but your drive is dead.
"Drive is dead????" what in this thread gives you that idea? What card might be failing?
Agent: do you have any Input Managers (might be called Input Methods) either in the Home Folder/Library or in the HD/Library (not /System/Library.)
Yes, do try another Account and test for this there.
I know you've already tried Google DNS, but try OpenDNS
You don't need to go to the OpenDNS site to use OpenDNS. Simply open Network>Advanced>DNS in Sys Prefs and enter the following numbers for the interface you use, e.g. Airport or Ethernet,
208.67.222.222
208.67.220.220
Hit OK and then Apply. Make sure those numbers are entered above any others you may have there.
To check to see if it's working
http://www.opendns.com/welcome/

I can connect my tc to the internet and back up my iMac, but it will not back up my mac book pro... ANY thoughts?

i can connect my tc to the internet and back up my iMac, but it will not back up my mac book pro... ANY thoughts?

When I go to connect my MBP, it says I have the wrong user name and/or password; however the names and password are the same on both computers.
The MBP connects smoothly to the internet, just not the TC.
Does this help?
There is no login name required to get internet unless you are running a vpn or pppoe client.
The wireless uses a security key.. but that is fixed in the wireless setup.. so no user login should be required at any time.
It sounds to me like you have the wrong setup.
Please do a screen shot and post it of the imac setup that works.. show us the airport network with its ip address and where you are putting in the login.
Please also do a snapshot of the TC and how it is setup.
What broadband do you have?
Is the TC a router or bridged?

Can ipad4 a1460 connects to the internet services of the 2g cdma mobile networks

can ipad4 a1460 connects to the internet services of the 2g cdma mobile networks

I'm not sure whatyou mean by "2G CDMA". The iPad supports CDMA EV-DO Rev. A and Rev. B and will work with the CDMA carrier for which the iPad is sold. You cannot buy a CDMA iPad intended for a given carrier and use it with another CDMA carrier, if that's what you wish to do.
Regards.

HT1695 Why can't I connect to the Internet when I not at home

Why can't I connect to the Internet when I'm not home

If you do not have an iPad with 3G cellular service, you can only connect to the internet when you have access to Wifi. Wifi is not available everywhere, but there are places that do offer free Wifi service, such as Starbucks, Panera Bread, the Airport, etc. When you are at a location which offers free Wifi access, you have to join their network, which is usuall nothing more than touching a connect option that should automatically pop up, when you open Safari on your ipad.

Can't connect wirelessly to the Internet

Hi all,
hope someone can help me with this.
I'm running OSX 10.3.9, have an ADSL Nation X-Modem and AirPort Express.
My wireless network is up and running, I have strong signal and AirTunes can connect and play fine wirelessly.
However, when I try to open Safari and connect to the Internet, it doesn't connect ("Can't find Server.")
When I plug the X-Modem direct into the Mac with the Ethernet cable, I can connect to the internet fine, so the modem and cable don't seem to be the problem. I've tried running throgh the AirPort Express SetUp Assistant and restarted AirPort and rebooted everything many times. In Network Preferences, it says it's happily connected, has IP address etc, but I still can't connect wirelessly to the Internet?
Any help greatly appreciated!
thanks
Nat

OK, here it is again
First you plug the Ethernet cable from your Internet modem into the AE. Then plug it in. The light will go amber. Run the Airport Setup Assistant. Create a new wireless network. Call it what you want. Enter the information about your modem, in the fields just like you do for your Ethernet connection on your PC or Mac. This means DHCP or static IP and subnet..... most if you use DHCP will be filled in for you. Now that you have saved the info and the AE has restarted, look for the network that you named in the available networks. If you have set it up to dish out IP addresses, it will give you one. If you have started out with WEP or WPA the connection process is much more difficult at first.
I leave it wide open until I can connect to it and then I create MAC access lists. I'll leave all the security stuff to you after you get it working basically.
Run Airport Admin Utility. It will scan the area for AEs and AEBSs and you can select yours from the list. Click on configure. Here is where you set all the details up on how you want it to work. Here you can configure the details, place your securities etc. Notice that you are accessing it wireless and then you can go through the various Tabs to configure how you want it to operate.
There is an Internet tab. This will show you how it is configured. It should look the same as your NIC parameters did when you hooked straight to the modem. There are also many more tabs that allow you to configure each area, like do you want it to be the gateway of your network, dish out IP addresses etc. My advice is to let it do that if more than one machine will connect and you don't require defined addresses to get to say a server.
The two important areas are the Internet and the LAN area. These tell it how to interact with your modem, and the machines trying to connect to it. If the AE doesn't see the modem or can't interact with it, one of the parameters is wrong. Same goes for the LAN side of things.
Michael

Built a livecd with archiso - can i release it on the internet?

Similar Messages

Maybe you are looking for