Built-in dictionary not showing

Hey all , how are you ?
The built-in dictionary not working !!
It was working before but i don't know what happend ! I formated my iphone and then restored it from itune and when i went to notes and highlighted a word and clicked on define , it told me to download it and i was using 3G network and it told me to use wifi , and now when i'm using wifi The "define" button isn't showing !! What's wrong !!? And i reset settings but it didn't work ! What's the problem ?

Sounds like either there is something plugged into the 3.5mm Audio Output port or the micro switch inside of the port is stuck.
If have something plugged into the Audio Output port, try unplugging and replugging it in several times to see if the internal micro switch will reset from Digital to normal Output.
If not, then you may need to contact your local AASP and take the Mac Mini in for service.

Similar Messages

  • Built in Ethernet not showing up

    I'v got a 15inch Power book running 10.4.3 In my network settings the Built in Ethernet option is not showing up. I plug in a working ethernet cable (works fine with other powerbooks) and the computer can not detect a connection. Run network setup assistant and it can't make a connection.
    Help.

    This is my 5th post on my problem and I've received only one response--and that was just to tell me to post my question somewhere else. So here I am again.
    When I go to Sys Preferences and Network. I pull up TCP/IP and there are no visible addresses. Network Status is all blank. What's the deal with my ethernet connection?
    Anyone?
    G4 iMac Flatscreen   Mac OS X (10.4.4)   800 mHz / 768 RAM

  • Built-In isight not showing picture

    **Please Help!**
    I have a built-in isight camera that is not working at the moment. I have tried everything that apple tells you about troubleshooting isight, created new account, repair permissions, empty caches, but nothing worked. Could not find isight preferences to delete.
    When I open, say PhotoBooth, Skype, ichat, my camera turns on (LED green light is on) but no picture is showing up. Do not know if there us a setting that turns the image off and i might have somehow or what. It was working one day and the next nothing.
    Does anyone have any solutions for this problem?

    Ok, so i found the answer by calling apple support.
    They told me to
    1. Shut off the computer.
    2. Turn on the computer.
    3. RIGHT AFTER you turn on the computer, simeltaneously hold down the command, option, 'p', and 'r' keys. This will reset the computer. You want to reset your computer two times, for a total of three start-ups (or three biiiiings that you hear at the start of the computer.) DO NOT LET GO OF THE KEYS UNTIL the third biiiing (or startup sound)!
    Once you hear that third biiiiing, just let the computer do its normal startup cycle. This process resets the perimeter RAM, which is used by applications such as safari and ichat.
    Good luck!

  • Built-in FTP not showing all files

    I have my 15" flat panel connected to a Topfield 7160 PVR by an ethernet cable.  The Topfield has a built-in FTP server.  So, using the built-in FTP (read only) facility in OS X Tiger, I can show the Topfield files on the Finder.
    Recently, however, the FTP facility has not been accessing all folders on the Topfield properly.  Some folders are shown as empty when they are not.  When I disconnect and reconnect, different folders are shown as empty.
    I have tested the Topfield FTP server with the Cyberduck client. Everything shows properly.  So, there is an issue with the OSX Tiger FTP client and/or how it sends commands to the Topfield FTP server.
    Does anyone know what the problem might be ?
    Many thanks
    Garry

    I think your second question is correct - I think I see more if I open up further down the tree.  I'll have to do some tests with the Finder and my AppleScript.  I'll search for more online regarding the file limit.
    I know that being read only the OS X ftp client isn't fully featured.  I wouldn't be surprised if there are limitations.
    Many thanks.
    GB

  • Built in camera not showing up in devices

    I have installed Skype but it can not find my built in camera (when I go to select the video device it doesn't find anything).  My system is a Dell Studio 1458.
    uname -r -s
    Linux 3.16.3-1-ARCH
    I have searched and can not find anything useful.  I can't even seem to locate my camera.  The Arch Webcam Setup has some information but I can't even find my device listed.  This webcam has worked in the past (on other operating systems) but I have never tried to get it to work on Arch until now. 
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.16.3-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=652fafcb-9a22-4cd0-8554-460d758126cc rw
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c3a7bfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c3a7c000-0x00000000c3a81fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c3a82000-0x00000000c3be9fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c3bea000-0x00000000c3c0efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c3c0f000-0x00000000c3c6efff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c3c6f000-0x00000000c3c6ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c3c70000-0x00000000c3cf0fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000c3cf1000-0x00000000c3f0efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c3f0f000-0x00000000c3f16fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c3f17000-0x00000000c3f1efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c3f1f000-0x00000000c3f80fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c3f81000-0x00000000c3f9efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000c3f9f000-0x00000000c3fdcfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c3fdd000-0x00000000c3ffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000c3fff000-0x00000000c3ffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c4000000-0x00000000c5ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c7800000-0x00000000c7ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0704000-0x00000000f0704fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000237ffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: Dell Inc. Studio 1458/0133D9, BIOS A07 05/12/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-D3FFF write-protect
    [ 0.000000] D4000-DFFFF uncachable
    [ 0.000000] E0000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0C4000000 mask FFE000000 uncachable
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0C0000000 mask FF8000000 write-back
    [ 0.000000] 4 base 100000000 mask F00000000 write-back
    [ 0.000000] 5 base 200000000 mask FE0000000 write-back
    [ 0.000000] 6 base 220000000 mask FF0000000 write-back
    [ 0.000000] 7 base 230000000 mask FF8000000 write-back
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xc4000000-0xc5ffffff] usable ==> reserved
    [ 0.000000] e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xc4000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f7050-0x000f705f] mapped at [ffff8800000f7050]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
    [ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
    [ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x237e00000-0x237ffffff]
    [ 0.000000] [mem 0x237e00000-0x237ffffff] page 2M
    [ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x234000000-0x237dfffff]
    [ 0.000000] [mem 0x234000000-0x237dfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x233ffffff]
    [ 0.000000] [mem 0x200000000-0x233ffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc3a7bfff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0xc39fffff] page 2M
    [ 0.000000] [mem 0xc3a00000-0xc3a7bfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xc3a82000-0xc3be9fff]
    [ 0.000000] [mem 0xc3a82000-0xc3be9fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xc3c0f000-0xc3c6efff]
    [ 0.000000] [mem 0xc3c0f000-0xc3c6efff] page 4k
    [ 0.000000] BRK [0x01b27000, 0x01b27fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xc3f0f000-0xc3f16fff]
    [ 0.000000] [mem 0xc3f0f000-0xc3f16fff] page 4k
    [ 0.000000] BRK [0x01b28000, 0x01b28fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xc3f1f000-0xc3f80fff]
    [ 0.000000] [mem 0xc3f1f000-0xc3f80fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xc3f9f000-0xc3fdcfff]
    [ 0.000000] [mem 0xc3f9f000-0xc3fdcfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xc3fff000-0xc3ffffff]
    [ 0.000000] [mem 0xc3fff000-0xc3ffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x379d8000-0x37ce3fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F6F70 000024 (v02 DELL )
    [ 0.000000] ACPI: XSDT 0x00000000C3FF14CB 000074 (v01 DELL FX09 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 0x00000000C3FE1000 0000F4 (v03 DELL M09 06040000 ALAN 00000001)
    [ 0.000000] ACPI: DSDT 0x00000000C3FE2000 00D5F3 (v02 DELL M09 06040000 INTL 20060912)
    [ 0.000000] ACPI: FACS 0x00000000C3F9BFC0 000040
    [ 0.000000] ACPI: HPET 0x00000000C3FFECC2 000038 (v01 DELL M09 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: MCFG 0x00000000C3FFECFA 00003C (v01 DELL M09 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: APIC 0x00000000C3FFED36 0000BC (v01 DELL M09 06040000 LTP 00000000)
    [ 0.000000] ACPI: BOOT 0x00000000C3FFEDF2 000028 (v01 DELL M09 06040000 LTP 00000001)
    [ 0.000000] ACPI: OSFR 0x00000000C3FFEE1A 000070 (v01 DELL DELL 06040000 ASL 00000061)
    [ 0.000000] ACPI: SLIC 0x00000000C3FFEE8A 000176 (v01 DELL FX09 06040000 LTP 00000000)
    [ 0.000000] ACPI: SSDT 0x00000000C3FE0000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20090320)
    [ 0.000000] ACPI: SSDT 0x00000000C3FDF000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20090320)
    [ 0.000000] ACPI: SSDT 0x00000000C3FDE000 00049F (v01 PmRef ApTst 00003000 INTL 20090320)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000237ffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x237ffffff]
    [ 0.000000] NODE_DATA [mem 0x237ff3000-0x237ff7fff]
    [ 0.000000] [ffffea0000000000-ffffea0008dfffff] PMD -> [ffff88022f600000-ffff8802375fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x237ffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009bfff]
    [ 0.000000] node 0: [mem 0x00100000-0xc3a7bfff]
    [ 0.000000] node 0: [mem 0xc3a82000-0xc3be9fff]
    [ 0.000000] node 0: [mem 0xc3c0f000-0xc3c6efff]
    [ 0.000000] node 0: [mem 0xc3f0f000-0xc3f16fff]
    [ 0.000000] node 0: [mem 0xc3f1f000-0xc3f80fff]
    [ 0.000000] node 0: [mem 0xc3f9f000-0xc3fdcfff]
    [ 0.000000] node 0: [mem 0xc3fff000-0xc3ffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x237ffffff]
    [ 0.000000] On node 0 totalpages: 2079880
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3995 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12468 pages used for memmap
    [ 0.000000] DMA32 zone: 797933 pages, LIFO batch:31
    [ 0.000000] Normal zone: 19968 pages used for memmap
    [ 0.000000] Normal zone: 1277952 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000e3fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc3a7c000-0xc3a81fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc3bea000-0xc3c0efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc3c6f000-0xc3c6ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc3c70000-0xc3cf0fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc3cf1000-0xc3f0efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc3f17000-0xc3f1efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc3f81000-0xc3f9efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc3fdd000-0xc3ffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc5ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc6000000-0xc77fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc7800000-0xc7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc8000000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf0703fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0704000-0xf0704fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0705000-0xfeafefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xc8000000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880237c00000 s86784 r8192 d23808 u262144
    [ 0.000000] pcpu-alloc: s86784 r8192 d23808 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2047359
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=652fafcb-9a22-4cd0-8554-460d758126cc rw
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8106532K/8319520K available (5335K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 212988K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1728.959 MHz processor
    [ 0.000048] Calibrating delay loop (skipped), value calculated using timer frequency.. 3459.99 BogoMIPS (lpj=5763196)
    [ 0.000051] pid_max: default: 32768 minimum: 301
    [ 0.000060] ACPI: Core revision 20140424
    [ 0.013580] ACPI: All ACPI Tables successfully acquired
    [ 0.023377] Security Framework initialized
    [ 0.023384] Yama: becoming mindful.
    [ 0.024083] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.026165] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.027064] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.027078] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.027376] Initializing cgroup subsys memory
    [ 0.027402] Initializing cgroup subsys devices
    [ 0.027410] Initializing cgroup subsys freezer
    [ 0.027414] Initializing cgroup subsys net_cls
    [ 0.027419] Initializing cgroup subsys blkio
    [ 0.027446] CPU: Physical Processor ID: 0
    [ 0.027448] CPU: Processor Core ID: 0
    [ 0.027453] mce: CPU supports 9 MCE banks
    [ 0.027465] CPU0: Thermal monitoring enabled (TM1)
    [ 0.027475] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    tlb_flushall_shift: 6
    [ 0.027572] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
    [ 0.028601] ftrace: allocating 20438 entries in 80 pages
    [ 0.041910] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.074900] smpboot: CPU0: Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz (fam: 06, model: 1e, stepping: 05)
    [ 0.179631] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
    [ 0.179652] perf_event_intel: CPU erratum AAJ80 worked around
    [ 0.179654] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
    [ 0.179656] ... version: 3
    [ 0.179658] ... bit width: 48
    [ 0.179659] ... generic registers: 4
    [ 0.179660] ... value mask: 0000ffffffffffff
    [ 0.179661] ... max period: 000000007fffffff
    [ 0.179663] ... fixed-purpose events: 3
    [ 0.179664] ... event mask: 000000070000000f
    [ 0.203037] x86: Booting SMP configuration:
    [ 0.203040] .... node #0, CPUs: #1
    [ 0.216378] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.223033] #2 #3 #4 #5 #6 #7
    [ 0.336263] x86: Booted up 1 node, 8 CPUs
    [ 0.336267] smpboot: Total of 8 processors activated (27674.98 BogoMIPS)
    [ 0.342350] devtmpfs: initialized
    [ 0.345861] PM: Registering ACPI NVS region [mem 0xc3c70000-0xc3cf0fff] (528384 bytes)
    [ 0.345874] PM: Registering ACPI NVS region [mem 0xc3f81000-0xc3f9efff] (122880 bytes)
    [ 0.347195] pinctrl core: initialized pinctrl subsystem
    [ 0.347244] RTC time: 0:13:26, date: 09/30/14
    [ 0.347304] NET: Registered protocol family 16
    [ 0.347442] cpuidle: using governor ladder
    [ 0.347445] cpuidle: using governor menu
    [ 0.347473] ACPI: bus type PCI registered
    [ 0.347475] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.347576] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.347579] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.348242] PCI: Using configuration type 1 for base access
    [ 0.360029] ACPI: Added _OSI(Module Device)
    [ 0.360032] ACPI: Added _OSI(Processor Device)
    [ 0.360034] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.360035] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.363464] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.379612] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.393321] ACPI: Dynamic OEM Table Load:
    [ 0.393330] ACPI: SSDT 0xFFFF88022BE82400 0003ED (v01 PmRef Cpu0Ist 00003000 INTL 20090320)
    [ 0.393928] ACPI: Dynamic OEM Table Load:
    [ 0.393936] ACPI: SSDT 0xFFFF88022BEB1000 0005CD (v01 PmRef Cpu0Cst 00003001 INTL 20090320)
    [ 0.419845] ACPI: Dynamic OEM Table Load:
    [ 0.419852] ACPI: SSDT 0xFFFF88022BE82C00 000303 (v01 PmRef ApIst 00003000 INTL 20090320)
    [ 0.432999] ACPI: Dynamic OEM Table Load:
    [ 0.433006] ACPI: SSDT 0xFFFF88022BE99A00 000119 (v01 PmRef ApCst 00003000 INTL 20090320)
    [ 1.326065] ACPI: Interpreter enabled
    [ 1.326074] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
    [ 1.326080] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    [ 1.326099] ACPI: (supports S0 S3 S4 S5)
    [ 1.326101] ACPI: Using IOAPIC for interrupt routing
    [ 1.326142] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 1.333007] ACPI: Power Resource [FN00] (off)
    [ 1.333122] ACPI: Power Resource [FN01] (off)
    [ 1.333858] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 1.333865] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 1.333907] \_SB_.PCI0:_OSC invalid UUID
    [ 1.333909] _OSC request data:1 1f 0
    [ 1.333914] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 1.334941] PCI host bridge to bus 0000:00
    [ 1.334945] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 1.334948] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.334950] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.334952] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.334955] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 1.334957] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 1.334959] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 1.334962] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xfebfffff]
    [ 1.334972] pci 0000:00:00.0: [8086:d132] type 00 class 0x060000
    [ 1.335119] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
    [ 1.335181] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
    [ 1.335245] pci 0000:00:03.0: System wakeup disabled by ACPI
    [ 1.335305] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
    [ 1.335439] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
    [ 1.335573] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
    [ 1.335702] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
    [ 1.335832] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
    [ 1.335946] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
    [ 1.336099] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
    [ 1.336141] pci 0000:00:16.0: reg 0x10: [mem 0xf0705800-0xf070580f 64bit]
    [ 1.336240] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.336375] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
    [ 1.336410] pci 0000:00:1a.0: reg 0x10: [mem 0xf0705c00-0xf0705fff]
    [ 1.336513] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.336581] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 1.336643] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
    [ 1.336666] pci 0000:00:1b.0: reg 0x10: [mem 0xf0700000-0xf0703fff 64bit]
    [ 1.336753] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.336821] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.336882] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
    [ 1.336973] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.337041] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.337099] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
    [ 1.337189] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.337257] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 1.337314] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
    [ 1.337404] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 1.337471] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 1.337543] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
    [ 1.337578] pci 0000:00:1d.0: reg 0x10: [mem 0xf0706000-0xf07063ff]
    [ 1.337685] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.337752] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.337810] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 1.337927] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 1.337991] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
    [ 1.338216] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
    [ 1.338246] pci 0000:00:1f.2: reg 0x10: [io 0x1830-0x1837]
    [ 1.338259] pci 0000:00:1f.2: reg 0x14: [io 0x1824-0x1827]
    [ 1.338272] pci 0000:00:1f.2: reg 0x18: [io 0x1828-0x182f]
    [ 1.338285] pci 0000:00:1f.2: reg 0x1c: [io 0x1820-0x1823]
    [ 1.338298] pci 0000:00:1f.2: reg 0x20: [io 0x1800-0x181f]
    [ 1.338312] pci 0000:00:1f.2: reg 0x24: [mem 0xf0705000-0xf07057ff]
    [ 1.338374] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.338487] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
    [ 1.338512] pci 0000:00:1f.3: reg 0x10: [mem 0xf0706400-0xf07064ff 64bit]
    [ 1.338539] pci 0000:00:1f.3: reg 0x20: [io 0x1840-0x185f]
    [ 1.338730] pci 0000:02:00.0: [1002:68e0] type 00 class 0x030000
    [ 1.338747] pci 0000:02:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 1.338758] pci 0000:02:00.0: reg 0x18: [mem 0xcfee0000-0xcfefffff 64bit]
    [ 1.338766] pci 0000:02:00.0: reg 0x20: [io 0x2000-0x20ff]
    [ 1.338780] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
    [ 1.338817] pci 0000:02:00.0: supports D1 D2
    [ 1.338878] pci 0000:02:00.1: [1002:aa68] type 00 class 0x040300
    [ 1.338894] pci 0000:02:00.1: reg 0x10: [mem 0xcfedc000-0xcfedffff 64bit]
    [ 1.338959] pci 0000:02:00.1: supports D1 D2
    [ 1.342669] pci 0000:00:03.0: PCI bridge to [bus 02]
    [ 1.342677] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
    [ 1.342684] pci 0000:00:03.0: bridge window [mem 0xcfe00000-0xcfefffff]
    [ 1.342693] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 1.342913] pci 0000:03:00.0: [14e4:1692] type 00 class 0x020000
    [ 1.343024] pci 0000:03:00.0: reg 0x10: [mem 0xf0300000-0xf030ffff 64bit]
    [ 1.343657] pci 0000:03:00.0: PME# supported from D3hot D3cold
    [ 1.343742] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 1.343882] pci 0000:00:1c.0: PCI bridge to [bus 03]
    [ 1.343893] pci 0000:00:1c.0: bridge window [mem 0xf0300000-0xf03fffff]
    [ 1.343992] acpiphp: Slot [1] registered
    [ 1.344007] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
    [ 1.344016] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 1.344025] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fffff]
    [ 1.344036] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 1.344367] pci 0000:06:00.0: [8086:422c] type 00 class 0x028000
    [ 1.344650] pci 0000:06:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
    [ 1.346064] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
    [ 1.346313] pci 0000:06:00.0: System wakeup disabled by ACPI
    [ 1.346546] pci 0000:00:1c.2: PCI bridge to [bus 06]
    [ 1.346556] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
    [ 1.346660] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
    [ 1.346675] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 1.346677] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 1.346680] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 1.346682] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 1.346684] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 1.346687] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    [ 1.346689] pci 0000:00:1e.0: bridge window [mem 0xc8000000-0xfebfffff] (subtractive decode)
    [ 1.347415] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 1.347495] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.347574] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 1.347647] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 11 12 14 15)
    [ 1.347725] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 1.347804] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 *5 6 7 11 12 14 15)
    [ 1.347885] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 1.347963] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 1.347994] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
    [ 1.347999] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 1.348004] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [ 1.348060] PCI host bridge to bus 0000:ff
    [ 1.348064] pci_bus 0000:ff: root bus resource [bus ff]
    [ 1.348070] pci 0000:ff:00.0: [8086:2c52] type 00 class 0x060000
    [ 1.348129] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
    [ 1.348192] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
    [ 1.348247] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
    [ 1.348303] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
    [ 1.348356] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
    [ 1.348410] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
    [ 1.348465] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
    [ 1.348520] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
    [ 1.348575] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
    [ 1.348628] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
    [ 1.348684] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
    [ 1.348738] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
    [ 1.348792] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
    [ 1.348845] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
    [ 1.349048] ACPI: Enabled 4 GPEs in block 00 to 3F
    [ 1.349316] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 1.349454] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.349459] vgaarb: loaded
    [ 1.349460] vgaarb: bridge control possible 0000:02:00.0
    [ 1.349504] PCI: Using ACPI for IRQ routing
    [ 1.356071] PCI: pci_cache_line_size set to 64 bytes
    [ 1.356281] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
    [ 1.356283] e820: reserve RAM buffer [mem 0xc3a7c000-0xc3ffffff]
    [ 1.356286] e820: reserve RAM buffer [mem 0xc3bea000-0xc3ffffff]
    [ 1.356289] e820: reserve RAM buffer [mem 0xc3c6f000-0xc3ffffff]
    [ 1.356291] e820: reserve RAM buffer [mem 0xc3f17000-0xc3ffffff]
    [ 1.356293] e820: reserve RAM buffer [mem 0xc3f81000-0xc3ffffff]
    [ 1.356295] e820: reserve RAM buffer [mem 0xc3fdd000-0xc3ffffff]
    [ 1.356426] NetLabel: Initializing
    [ 1.356427] NetLabel: domain hash size = 128
    [ 1.356428] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.356446] NetLabel: unlabeled traffic allowed by default
    [ 1.356505] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
    [ 1.356514] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
    [ 1.356521] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.358579] hpet: hpet2 irq 40 for MSI
    [ 1.358647] hpet: hpet3 irq 41 for MSI
    [ 1.358721] hpet: hpet4 irq 42 for MSI
    [ 1.358783] hpet: hpet5 irq 43 for MSI
    [ 1.358849] hpet: hpet6 irq 44 for MSI
    [ 1.358988] Switched to clocksource hpet
    [ 1.365036] pnp: PnP ACPI init
    [ 1.365056] ACPI: bus type PNP registered
    [ 1.365296] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
    [ 1.365301] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [ 1.365370] system 00:01: [io 0x0910-0x0917] has been reserved
    [ 1.365373] system 00:01: [io 0x0500-0x050f] has been reserved
    [ 1.365376] system 00:01: [io 0xffff] has been reserved
    [ 1.365379] system 00:01: [io 0x0400-0x047f] could not be reserved
    [ 1.365381] system 00:01: [io 0x1180-0x11ff] has been reserved
    [ 1.365384] system 00:01: [io 0x164e-0x164f] has been reserved
    [ 1.365386] system 00:01: [io 0xfe00-0xfe01] has been reserved
    [ 1.365390] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.365455] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.365496] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.365537] pnp 00:04: Plug and Play ACPI device, IDs DLL0404 PNP0f13 (active)
    [ 1.366011] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.366015] system 00:05: [mem 0xfed1b000-0xfed1bfff] has been reserved
    [ 1.366020] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
    [ 1.366023] system 00:05: [mem 0xf0704000-0xf0704fff] has been reserved
    [ 1.366025] system 00:05: [mem 0xc8000000-0xc8000fff] has been reserved
    [ 1.366028] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.366031] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.366033] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
    [ 1.366036] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.366040] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.366223] pnp: PnP ACPI: found 6 devices
    [ 1.366225] ACPI: bus type PNP unregistered
    [ 1.373688] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
    [ 1.373693] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
    [ 1.373712] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
    [ 1.373715] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
    [ 1.373732] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 1.373734] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 1.373737] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 1.373740] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 1.373750] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc8100000-0xc82fffff 64bit pref]
    [ 1.373756] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc8300000-0xc84fffff 64bit pref]
    [ 1.373760] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
    [ 1.373763] pci 0000:00:1c.2: BAR 13: assigned [io 0x5000-0x5fff]
    [ 1.373768] pci 0000:02:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
    [ 1.373771] pci 0000:00:03.0: PCI bridge to [bus 02]
    [ 1.373774] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
    [ 1.373779] pci 0000:00:03.0: bridge window [mem 0xcfe00000-0xcfefffff]
    [ 1.373783] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 1.373788] pci 0000:00:1c.0: PCI bridge to [bus 03]
    [ 1.373795] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
    [ 1.373805] pci 0000:00:1c.0: bridge window [mem 0xf0300000-0xf03fffff]
    [ 1.373814] pci 0000:00:1c.0: bridge window [mem 0xc8100000-0xc82fffff 64bit pref]
    [ 1.373825] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
    [ 1.373833] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 1.373842] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fffff]
    [ 1.373851] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 1.373862] pci 0000:00:1c.2: PCI bridge to [bus 06]
    [ 1.373870] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
    [ 1.373879] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
    [ 1.373888] pci 0000:00:1c.2: bridge window [mem 0xc8300000-0xc84fffff 64bit pref]
    [ 1.373899] pci 0000:00:1e.0: PCI bridge to [bus 07]
    [ 1.373914] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.373917] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.373919] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.373921] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 1.373924] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 1.373926] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
    [ 1.373928] pci_bus 0000:00: resource 10 [mem 0xc8000000-0xfebfffff]
    [ 1.373931] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 1.373933] pci_bus 0000:02: resource 1 [mem 0xcfe00000-0xcfefffff]
    [ 1.373936] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 1.373938] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
    [ 1.373940] pci_bus 0000:03: resource 1 [mem 0xf0300000-0xf03fffff]
    [ 1.373943] pci_bus 0000:03: resource 2 [mem 0xc8100000-0xc82fffff 64bit pref]
    [ 1.373945] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
    [ 1.373947] pci_bus 0000:04: resource 1 [mem 0xf0200000-0xf02fffff]
    [ 1.373950] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 1.373952] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
    [ 1.373954] pci_bus 0000:06: resource 1 [mem 0xf0400000-0xf04fffff]
    [ 1.373957] pci_bus 0000:06: resource 2 [mem 0xc8300000-0xc84fffff 64bit pref]
    [ 1.373959] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
    [ 1.373962] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
    [ 1.373964] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.373966] pci_bus 0000:07: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 1.373968] pci_bus 0000:07: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 1.373971] pci_bus 0000:07: resource 9 [mem 0x000e0000-0x000e3fff]
    [ 1.373973] pci_bus 0000:07: resource 10 [mem 0xc8000000-0xfebfffff]
    [ 1.374005] NET: Registered protocol family 2
    [ 1.374262] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 1.374559] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.374958] TCP: Hash tables configured (established 65536 bind 65536)
    [ 1.374982] TCP: reno registered
    [ 1.374998] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.375081] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.375203] NET: Registered protocol family 1
    [ 1.375845] pci 0000:02:00.0: Boot video device
    [ 1.375936] PCI: CLS 64 bytes, default 64
    [ 1.375985] Unpacking initramfs...
    [ 1.450890] Freeing initrd memory: 3120K (ffff8800379d8000 - ffff880037ce4000)
    [ 1.450900] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.450903] software IO TLB [mem 0xbfa7c000-0xc3a7c000] (64MB) mapped at [ffff8800bfa7c000-ffff8800c3a7bfff]
    [ 1.450952] Simple Boot Flag at 0x36 set to 0x1
    [ 1.451393] Scanning for low memory corruption every 60 seconds
    [ 1.451809] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [ 1.452261] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.454040] zbud: loaded
    [ 1.454273] VFS: Disk quotas dquot_6.5.2
    [ 1.454320] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.454464] msgmni has been set to 15839
    [ 1.454534] Key type big_key registered
    [ 1.454794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.454875] io scheduler noop registered
    [ 1.454879] io scheduler deadline registered
    [ 1.454941] io scheduler cfq registered (default)
    [ 1.455775] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.455794] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.455830] vesafb: mode is 1024x768x32, linelength=4096, pages=0
    [ 1.455831] vesafb: scrolling: redraw
    [ 1.455833] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 1.455853] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010e80000, using 3072k, total 3072k
    [ 1.574668] Console: switching to colour frame buffer device 128x48
    [ 1.693436] fb0: VESA VGA frame buffer device
    [ 1.693457] intel_idle: MWAIT substates: 0x1120
    [ 1.693473] intel_idle: v0.4 model 0x1E
    [ 1.693475] intel_idle: lapic_timer_reliable_states 0x2
    [ 1.693949] GHES: HEST is not enabled!
    [ 1.694045] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.694683] Linux agpgart interface v0.103
    [ 1.694762] rtc_cmos 00:02: RTC can wake from S4
    [ 1.694923] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 1.694966] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.694982] ledtrig-cpu: registered to indicate activity on CPUs
    [ 1.695119] TCP: cubic registered
    [ 1.695238] NET: Registered protocol family 10
    [ 1.695532] NET: Registered protocol family 17
    [ 1.696026] registered taskstats version 1
    [ 1.696682] Magic number: 14:437:204
    [ 1.696709] acpi device:59: hash matches
    [ 1.696719] acpi device:2c: hash matches
    [ 1.696811] rtc_cmos 00:02: setting system clock to 2014-09-30 00:13:27 UTC (1412036007)
    [ 1.697022] PM: Hibernation image not present or could not be loaded.
    [ 1.698955] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
    [ 1.698959] Write protecting the kernel read-only data: 8192k
    [ 1.704529] Freeing unused kernel memory: 796K (ffff880001539000 - ffff880001600000)
    [ 1.706993] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
    [ 1.723222] random: systemd-tmpfile urandom read with 10 bits of entropy available
    [ 1.726313] systemd-udevd[84]: starting version 216
    [ 1.750954] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 1.761851] i8042: Detected active multiplexing controller, rev 1.1
    [ 1.765273] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.765338] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 1.765399] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 1.765463] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 1.765567] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 1.769703] ACPI: bus type USB registered
    [ 1.769802] SCSI subsystem initialized
    [ 1.769804] usbcore: registered new interface driver usbfs
    [ 1.769859] usbcore: registered new interface driver hub
    [ 1.770012] usbcore: registered new device driver usb
    [ 1.771662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.773005] ehci-pci: EHCI PCI platform driver
    [ 1.773119] libata version 3.00 loaded.
    [ 1.773323] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 1.773338] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.773363] ehci-pci 0000:00:1a.0: debug port 2
    [ 1.777407] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.777437] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf0705c00
    [ 1.785529] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.785893] hub 1-0:1.0: USB hub found
    [ 1.785922] hub 1-0:1.0: 3 ports detected
    [ 1.786574] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 1.786592] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.786634] ehci-pci 0000:00:1d.0: debug port 2
    [ 1.790657] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.790673] ehci-pci 0000:00:1d.0: irq 20, io mem 0xf0706000
    [ 1.798854] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.799240] hub 2-0:1.0: USB hub found
    [ 1.799257] hub 2-0:1.0: 3 ports detected
    [ 1.799619] ahci 0000:00:1f.2: version 3.0
    [ 1.799853] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
    [ 1.799884] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 1.804130] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.812224] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
    [ 1.812234] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
    [ 1.834196] scsi0 : ahci
    [ 1.835068] scsi1 : ahci
    [ 1.835917] scsi2 : ahci
    [ 1.836544] scsi3 : ahci
    [ 1.837241] scsi4 : ahci
    [ 1.837870] scsi5 : ahci
    [ 1.838021] ata1: SATA max UDMA/133 abar m2048@0xf0705000 port 0xf0705100 irq 45
    [ 1.838032] ata2: SATA max UDMA/133 abar m2048@0xf0705000 port 0xf0705180 irq 45
    [ 1.838035] ata3: DUMMY
    [ 1.838038] ata4: DUMMY
    [ 1.838043] ata5: SATA max UDMA/133 abar m2048@0xf0705000 port 0xf0705300 irq 45
    [ 1.838051] ata6: SATA max UDMA/133 abar m2048@0xf0705000 port 0xf0705380 irq 45
    [ 2.092195] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 2.155559] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.162122] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10002, max UDMA/133
    [ 2.162129] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.168703] ata1.00: configured for UDMA/133
    [ 2.169253] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0002 PQ: 0 ANSI: 5
    [ 2.216879] hub 1-1:1.0: USB hub found
    [ 2.217133] hub 1-1:1.0: 6 ports detected
    [ 2.325410] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 2.450075] hub 2-1:1.0: USB hub found
    [ 2.450318] hub 2-1:1.0: 8 ports detected
    [ 2.451999] tsc: Refined TSC clocksource calibration: 1729.000 MHz
    [ 2.488691] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.491385] ata2.00: ATAPI: HL-DT-STDVD+/-RW GA31N, A102, max UDMA/100
    [ 2.500441] ata2.00: configured for UDMA/100
    [ 2.514976] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GA31N A102 PQ: 0 ANSI: 5
    [ 2.851854] ata5: SATA link down (SStatus 0 SControl 300)
    [ 3.171719] ata6: SATA link down (SStatus 0 SControl 300)
    [ 3.179350] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 3.179354] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 3.179393] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.179396] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.179413] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.200660] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 3.200666] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 3.200889] sda: sda1
    [ 3.201016] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 3.201298] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.452051] Switched to clocksource tsc
    [ 3.560153] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.377618] random: nonblocking pool is initialized
    [ 4.381174] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
    [ 4.381645] systemd[1]: Detected architecture 'x86-64'.
    [ 4.409326] systemd[1]: Set hostname to <arch>.
    [ 5.721524] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 5.721647] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 5.721673] systemd[1]: Starting Remote File Systems.
    [ 5.723143] systemd[1]: Reached target Remote File Systems.
    [ 5.723189] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 5.723265] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 5.723286] systemd[1]: Starting Paths.
    [ 5.724448] systemd[1]: Reached target Paths.
    [ 5.724510] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 5.727072] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 5.727101] systemd[1]: Starting Encrypted Volumes.
    [ 5.728520] systemd[1]: Reached target Encrypted Volumes.
    [ 5.728544] systemd[1]: Starting Root Slice.
    [ 5.750786] systemd[1]: Created slice Root Slice.
    [ 5.750814] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 5.752555] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 5.752578] systemd[1]: Starting Delayed Shutdown Socket.
    [ 5.754207] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 5.754231] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 5.756078] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 5.756100] systemd[1]: Starting Journal Socket (/dev/log).
    [ 5.757697] systemd[1]: Listening on Journal Socket (/dev/log).
    [ 5.757720] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 5.759334] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 5.759356] systemd[1]: Starting User and Session Slice.
    [ 5.761272] systemd[1]: Created slice User and Session Slice.
    [ 5.761307] systemd[1]: Starting udev Control Socket.
    [ 5.762740] systemd[1]: Listening on udev Control Socket.
    [ 5.762770] systemd[1]: Starting udev Kernel Socket.
    [ 5.764190] systemd[1]: Listening on udev Kernel Socket.
    [ 5.764216] systemd[1]: Starting Journal Socket.
    [ 5.765551] systemd[1]: Listening on Journal Socket.
    [ 5.765588] systemd[1]: Starting System Slice.
    [ 5.767256] systemd[1]: Created slice System Slice.
    [ 5.767297] systemd[1]: Started File System Check on Root Device.
    [ 5.767319] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 5.818758] systemd[1]: Started Set Up Additional Binary Formats.
    [ 5.818800] systemd[1]: Starting udev Coldplug all Devices...
    [ 5.821120] systemd[1]: Mounting Debug File System...
    [ 5.823057] systemd[1]: Starting Setup Virtual Console...
    [ 5.825188] systemd[1]: Mounting Huge Pages File System...
    [ 5.827248] systemd[1]: Mounting POSIX Message Queue File System...
    [ 5.981682] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 6.114414] systemd[1]: Starting Load Kernel Modules...
    [ 6.116420] systemd[1]: Starting system-getty.slice.
    [ 6.118219] systemd[1]: Created slice system-getty.slice.
    [ 6.118261] systemd[1]: Starting Journal Service...
    [ 6.121369] systemd[1]: Started Journal Service.
    [ 6.586429] EXT4-fs (sda1): re-mounted. Opts: (null)
    [ 7.659659] media: Linux media interface: v0.10
    [ 7.741403] Linux video capture interface: v2.00
    [ 7.918282] usbcore: registered new interface driver uvcvideo
    [ 7.918284] USB Video Class driver (1.1.1)
    [ 7.963811] Adding 10485756k swap on /swapfile. Priority:-1 extents:14 across:11231228k FS
    [ 7.965281] systemd-udevd[199]: starting version 216
    [ 8.363580] systemd-journald[179]: Received request to flush runtime journal from PID 1
    [ 12.094658] ACPI: AC Adapter [ADP1] (on-line)
    [ 12.140834] ACPI: Video Device [ATID] (multi-head: yes rom: no post: no)
    [ 12.149455] acpi device:54: registered as cooling_device8
    [ 12.149520] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:53/LNXVIDEO:02/input/input5
    [ 12.537723] [Firmware Bug]: battery: reported current charge level (2481) is higher than reported maximum charge level (2481).
    [ 12.537834] ACPI: Battery Slot [BAT1] (battery present)
    [ 12.655014] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
    [ 12.655045] ACPI: Lid Switch [LID0]
    [ 12.655098] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
    [ 12.655102] ACPI: Power Button [PWRB]
    [ 12.655155] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
    [ 12.655158] ACPI: Power Button [PWRF]
    [ 12.657748] wmi: Mapper loaded
    [ 12.795460] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
    [ 12.795465] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 12.795473] ACPI Warning: SystemIO range 0x00000000000011c0-0x00000000000011cf conflicts with OpRegion 0x0000000000001180-0x00000000000011e3 (\GPIO) (20140424/utaddress-258)
    [ 12.795476] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 12.795477] ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011e3 (\GPIO) (20140424/utaddress-258)
    [ 12.795480] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 12.795481] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011e3 (\GPIO) (20140424/utaddress-258)
    [ 12.795484] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 12.795485] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 12.855033] ACPI: Fan [FAN0] (off)
    [ 12.855080] ACPI: Fan [FAN1] (off)
    [ 12.913673] ACPI Warning: SystemIO range 0x0000000000001840-0x000000000000185f conflicts with OpRegion 0x0000000000001840-0x000000000000184f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
    [ 12.913678] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 12.921802] thermal LNXTHERM:00: registered as thermal_zone0
    [ 12.921805] ACPI: Thermal Zone [TZ01] (27 C)
    [ 12.960592] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 12.970042] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
    [ 13.082789] iTCO_vendor_support: vendor-support=0
    [ 13.176153] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 13.208803] EDAC MC: Ver: 3.0.0
    [ 13.299214] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x3
    [ 13.299421] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 13.299460] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
    [ 13.299627] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 13.786051] input: Dell WMI hotkeys as /devices/virtual/input/input11
    [ 13.786183] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
    [ 13.818575] cfg80211: Calling CRDA to update world regulatory domain
    [ 13.849073] microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x3
    [ 13.907477] microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x3
    [ 13.907575] microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x3
    [ 13.907608] microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x3
    [ 13.907666] microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x3
    [ 13.907754] microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x3
    [ 13.907814] microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x3
    [ 13.907882] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 14.152987] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 14.152991] Copyright(c) 2003- 2014 Intel Corporation
    [ 14.153235] iwlwifi 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 14.153491] iwlwifi 0000:06:00.0: irq 47 for MSI/MSI-X
    [ 14.153912] iwlwifi 0000:06:00.0: Direct firmware load failed with error -2
    [ 14.153915] iwlwifi 0000:06:00.0: Falling back to user helper
    [ 14.154922] iwlwifi 0000:06:00.0: Direct firmware load failed with error -2
    [ 14.154927] iwlwifi 0000:06:00.0: Falling back to user helper
    [ 14.344828] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 583640
    [ 14.390573] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
    [ 14.423406] mousedev: PS/2 mouse device common for all mice
    [ 15.069332] iwlwifi 0000:06:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
    [ 15.141257] [drm] Initialized drm 1.1.0 20060810
    [ 15.333255] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
    [ 15.482940] pps_core: LinuxPPS API ver. 1 registered
    [ 15.482940] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    [ 15.483829] PTP clock support registered
    [ 15.663057] tg3.c:v3.137 (May 11, 2014)
    [ 15.787086] iwlwifi 0000:06:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 15.787090] iwlwifi 0000:06:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 15.787093] iwlwifi 0000:06:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 15.787096] iwlwifi 0000:06:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
    [ 15.787346] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S
    [ 15.808676] snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
    [ 15.809174] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
    [ 15.809358] snd_hda_intel 0000:02:00.1: irq 49 for MSI/MSI-X
    [ 15.851697] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 15.874430] [drm] radeon kernel modesetting enabled.
    [ 15.874491] checking generic (d0000000 300000) vs hw (d0000000 10000000)
    [ 15.874493] fb: switching to radeondrmfb from VESA VGA
    [ 15.874516] Console: switching to colour dummy device 80x25
    [ 15.875051] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E0 0x1028:0x0414).
    [ 15.875074] [drm] register mmio base: 0xCFEE0000
    [ 15.875077] [drm] register mmio size: 131072
    [ 15.875128] ATOM BIOS: Dell
    [ 15.875192] radeon 0000:02:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
    [ 15.875195] radeon 0000:02:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
    [ 15.875197] [drm] Detected VRAM RAM=1024M, BAR=256M
    [ 15.875198] [drm] RAM width 64bits DDR
    [ 15.875318] [TTM] Zone kernel: Available graphics memory: 4055978 kiB
    [ 15.875322] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
    [ 15.875325] [TTM] Initializing pool allocator
    [ 15.875336] [TTM] Initializing DMA pool allocator
    [ 15.875369] [drm] radeon: 1024M of VRAM memory ready
    [ 15.875373] [drm] radeon: 1024M of GTT memory ready.
    [ 15.875397] [drm] Loading CEDAR Microcode
    [ 15.879270] libphy: tg3 mdio bus: probed
    [ 15.946342] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 00:24:e8:84:0d:42
    [ 15.946348] tg3 0000:03:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=300:01)
    [ 15.946352] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    [ 15.946356] tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    [ 16.196562] systemd-udevd[219]: renamed network interface wlan0 to wlp6s0
    [ 16.316154] [drm] Internal thermal controller without fan control
    [ 16.352233] [drm] radeon: dpm initialized
    [ 16.400670] [drm] GART: num cpu pages 262144, num gpu pages 262144
    [ 16.401953] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
    [ 16.416903] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
    [ 16.417040] radeon 0000:02:00.0: WB enabled
    [ 16.417043] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880226ebfc00
    [ 16.417045] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880226ebfc0c
    [ 16.417887] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc90010f1c418
    [ 16.417889] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 16.417889] [drm] Driver supports precise vblank timestamp query.
    [ 16.417907] radeon 0000:02:00.0: irq 50 for MSI/MSI-X
    [ 16.417919] radeon 0000:02:00.0: radeon: using MSI.
    [ 16.417945] [drm] radeon: irq initialized.
    [ 16.434931] [drm] ring test on 0 succeeded in 1 usecs
    [ 16.434989] [drm] ring test on 3 succeeded in 1 usecs
    [ 16.622585] [drm] ring test on 5 succeeded in 1 usecs
    [ 16.622591] [drm] UVD initialized successfully.
    [ 16.622845] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 16.622875] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 16.774620] [drm] ib test on ring 5 succeeded
    [ 16.832629] [drm] radeon atom DIG backlight initialized
    [ 16.832636] [drm] Radeon Display Connectors
    [ 16.832639] [drm] Connector 0:
    [ 16.832642] [drm] LVDS-1
    [ 16.832647] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
    [ 16.832649] [drm] Encoders:
    [ 16.832652] [drm] LCD1: INTERNAL_UNIPHY
    [ 16.832655] [drm] Connector 1:
    [ 16.832657] [drm] HDMI-A-1
    [ 16.832659] [drm] HPD1
    [ 16.832663] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
    [ 16.832666] [drm] Encoders:
    [ 16.832668] [drm] DFP1: INTERNAL_UNIPHY1
    [ 16.832671] [drm] Connector 2:
    [ 16.832673] [drm] VGA-1
    [ 16.832677] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
    [ 16.832679] [drm] Encoders:
    [ 16.832682] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 17.026255] systemd-udevd[222]: renamed network interface eth0 to enp3s0
    [ 17.065685] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input14
    [ 17.261282] [drm] fb mappable at 0xD045E000
    [ 17.261284] [drm] vram apper at 0xD0000000
    [ 17.261286] [drm] size 4325376
    [ 17.261287] [drm] fb depth is 24
    [ 17.261288] [drm] pitch is 5632
    [ 17.261534] fbcon: radeondrmfb (fb0) is primary device
    [ 17.367223] sound hdaudioC0D0: ALC665: SKU not ready 0x598301f0
    [ 17.367562] sound hdaudioC0D0: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:speaker
    [ 17.367564] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 17.367566] sound hdaudioC0D0: hp_outs=2 (0x19/0x1b/0x0/0x0/0x0)
    [ 17.367567] sound hdaudioC0D0: mono: mono_out=0x0
    [ 17.367568] sound hdaudioC0D0: inputs:
    [ 17.367570] sound hdaudioC0D0: Mic=0x1a
    [ 17.367572] sound hdaudioC0D0: Internal Mic=0x12
    [ 17.377094] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input15
    [ 17.377822] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
    [ 17.378406] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
    [ 17.378500] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
    [ 17.442455] Console: switching to colour frame buffer device 170x48
    [ 17.444812] radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
    [ 17.444813] radeon 0000:02:00.0: registered panic notifier
    [ 17.482703] [drm] Initialized radeon 2.39.0 20080528 for 0000:02:00.0 on minor 0
    [ 26.212135] systemd-logind[264]: Watching system buttons on /dev/input/event4 (Power Button)
    [ 31.178480] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S
    [ 31.185236] iwlwifi 0000:06:00.0: Radio type=0x1-0x3-0x1
    [ 31.399951] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S
    [ 31.406681] iwlwifi 0000:06:00.0: Radio type=0x1-0x3-0x1
    [ 31.545116] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
    [ 31.547041] tg3 0000:03:00.0: irq 51 for MSI/MSI-X
    [ 31.571171] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    [ 31.990689] tg3 0000:03:00.0 enp3s0: Link is down
    [ 33.657456] cfg80211: Calling CRDA to update world regulatory domain
    [ 36.391390] wlp6s0: authenticate with 00:0f:66:e4:92:87
    [ 36.425158] wlp6s0: send auth to 00:0f:66:e4:92:87 (try 1/3)
    [ 36.427197] wlp6s0: authenticated
    [ 36.427394] iwlwifi 0000:06:00.0 wlp6s0: disabling HT/VHT due to WEP/TKIP use
    [ 36.427400] iwlwifi 0000:06:00.0 wlp6s0: disabling HT as WMM/QoS is not supported by the AP
    [ 36.427403] iwlwifi 0000:06:00.0 wlp6s0: disabling VHT as WMM/QoS is not supported by the AP
    [ 36.427626] wlp6s0: associate with 00:0f:66:e4:92:87 (try 1/3)
    [ 36.432924] wlp6s0: RX AssocResp from 00:0f:66:e4:92:87 (capab=0x411 status=0 aid=1)
    [ 36.437622] wlp6s0: associated
    [ 36.437651] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
    [ 444.136094] wlp6s0: deauthenticated from 00:0f:66:e4:92:87 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
    [ 444.192300] cfg80211: Calling CRDA to update world regulatory domain
    [ 445.342475] cfg80211: Calling CRDA to update world regulatory domain
    [ 448.002035] wlp6s0: authenticate with 00:0f:66:e4:92:87
    [ 448.003465] wlp6s0: send auth to 00:0f:66:e4:92:87 (try 1/3)
    [ 448.011060] wlp6s0: authenticated
    [ 448.011355] iwlwifi 0000:06:00.0 wlp6s0: disabling HT/VHT due to WEP/TKIP use
    [ 448.011363] iwlwifi 0000:06:00.0 wlp6s0: disabling HT as WMM/QoS is not supported by the AP
    [ 448.011368] iwlwifi 0000:06:00.0 wlp6s0: disabling VHT as WMM/QoS is not supported by the AP
    [ 448.013855] wlp6s0: associate with 00:0f:66:e4:92:87 (try 1/3)
    [ 448.031262] wlp6s0: RX AssocResp from 00:0f:66:e4:92:87 (capab=0x411 status=0 aid=1)
    [ 448.039635] wlp6s0: associated
    lspci
    00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
    00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
    00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
    00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
    00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
    00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
    00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
    00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
    00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
    00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
    00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset P

    @davidm
    Just ran
    lsusb -v
    and there is some output I don't understand. I don't see any sign of the integrated webcam but I will post the results anyway.
    Bus 002 Device 006: ID 10d5:55a2 Uni Class Technology Co., Ltd 2Port KVMSwitcher
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 1.10
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 8
    idVendor 0x10d5 Uni Class Technology Co., Ltd
    idProduct 0x55a2 2Port KVMSwitcher
    bcdDevice 0.01
    iManufacturer 1
    iProduct 2
    iSerial 3
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 59
    bNumInterfaces 2
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0x80
    (Bus Powered)
    MaxPower 96mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 3 Human Interface Device
    bInterfaceSubClass 0 No Subclass
    bInterfaceProtocol 0 None
    iInterface 0
    HID Device Descriptor:
    bLength 9
    bDescriptorType 33
    bcdHID 1.00
    bCountryCode 0 Not supported
    bNumDescriptors 1
    bDescriptorType 34 Report
    wDescriptorLength 65
    Report Descriptors:
    ** UNAVAILABLE **
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0008 1x 8 bytes
    bInterval 16
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 1
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 3 Human Interface Device
    bInterfaceSubClass 0 No Subclass
    bInterfaceProtocol 0 None
    iInterface 0
    HID Device Descriptor:
    bLength 9
    bDescriptorType 33
    bcdHID 1.00
    bCountryCode 0 Not supported
    bNumDescriptors 1
    bDescriptorType 34 Report
    wDescriptorLength 24
    Report Descriptors:
    ** UNAVAILABLE **
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x02 EP 2 OUT
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0008 1x 8 bytes
    bInterval 16
    Bus 002 Device 005: ID 046d:c52f Logitech, Inc. Unifying Receiver
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 8
    idVendor 0x046d Logitech, Inc.
    idProduct 0xc52f Unifying Receiver
    bcdDevice 22.00
    iManufacturer 1
    iProduct 2
    iSerial 0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 59
    bNumInterfaces 2
    bConfigurationValue 1
    iConfiguration 4
    bmAttributes 0xa0
    (Bus Powered)
    Remote Wakeup
    MaxPower 98mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 3 Human Interface Device
    bInterfaceSubClass 1 Boot Interface Subclass
    bInterfaceProtocol 2 Mouse
    iInterface 0
    HID Device Descriptor:
    bLength 9
    bDescriptorType 33
    bcdHID 1.11
    bCountryCode 0 Not supported
    bNumDescriptors 1
    bDescriptorType 34 Report
    wDescriptorLength 67
    Report Descriptors:
    ** UNAVAILABLE **
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0008 1x 8 bytes
    bInterval 2
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 1
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 3 Human Interface Device
    bInterfaceSubClass 0 No Subclass
    bInterfaceProtocol 0 None
    iInterface 0
    HID Device Descriptor:
    bLength 9
    bDescriptorType 33
    bcdHID 1.11
    bCountryCode 0 Not supported
    bNumDescriptors 1
    bDescriptorType 34 Report
    wDescriptorLength 79
    Report Descriptors:
    ** UNAVAILABLE **
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x82 EP 2 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0014 1x 20 bytes
    bInterval 2
    Bus 002 Device 004: ID 04d9:1603 Holtek Semiconductor, Inc. Keyboard
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 1.10
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 8
    idVendor 0x04d9 Holtek Semiconductor, Inc.
    idProduct 0x1603 Keyboard
    bcdDevice 3.10
    iManufacturer 1
    iProduct 2
    iSerial 0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 59
    bNumInterfaces 2
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xa0
    (Bus Powered)
    Remote Wakeup
    MaxPower 100mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 3 Human Interface Device
    bInterfaceSubClass 1 Boot Interface Subclass
    bInterfaceProtocol 1 Keyboard
    iInterface 0
    HID Device Descriptor:
    bLength 9
    bDescriptorType 33
    bcdHID 1.10
    bCountryCode 0 Not supported
    bNumDescriptors 1
    bDescriptorType 34 Report
    wDescriptorLength 62
    Report Descriptors:
    ** UNAVAILABLE **
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0008 1x 8 bytes
    bInterval 10
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 1
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 3 Human Interface Device
    bInterfaceSubClass 0 No Subclass
    bInterfaceProtocol 0 None
    iInterface 0
    HID Device Descriptor:
    bLength 9
    bDescriptorType 33
    bcdHID 1.10
    bCountryCode 0 Not supported
    bNumDescriptors 1
    bDescriptorType 34 Report
    wDescriptorLength 101
    Report Descriptors:
    ** UNAVAILABLE **
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x82 EP 2 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0008 1x 8 bytes
    bInterval 10
    Bus 002 Device 003: ID 058f:9254 Alcor Micro Corp. Hub
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 1.10
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 0 Full speed (or root) hub
    bMaxPacketSize0 8
    idVendor 0x058f Alcor Micro Corp.
    idProduct 0x9254 Hub
    bcdDevice 3.12
    iManufacturer 1
    iProduct 2
    iSerial 0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 100mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0001 1x 1 bytes
    bInterval 255
    Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 1 Single TT
    bMaxPacketSize0 64
    idVendor 0x8087 Intel Corp.
    idProduct 0x0020 Integrated Rate Matching Hub
    bcdDevice 0.00
    iManufacturer 0
    iProduct 0
    iSerial 0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0002 1x 2 bytes
    bInterval 12
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 0 Full speed (or root) hub
    bMaxPacketSize0 64
    idVendor 0x1d6b Linux Foundation
    idProduct 0x0002 2.0 root hub
    bcdDevice 3.16
    iManufacturer 3
    iProduct 2
    iSerial 1
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0004 1x 4 bytes
    bInterval 12
    Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 1 Single TT
    bMaxPacketSize0 64
    idVendor 0x8087 Intel Corp.
    idProduct 0x0020 Integrated Rate Matching Hub
    bcdDevice 0.00
    iManufacturer 0
    iProduct 0
    iSerial 0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0001 1x 1 bytes
    bInterval 12
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 0 Full speed (or root) hub
    bMaxPacketSize0 64
    idVendor 0x1d6b Linux Foundation
    idProduct 0x0002 2.0 root hub
    bcdDevice 3.16
    iManufacturer 3
    iProduct 2
    iSerial 1
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0004 1x 4 bytes
    bInterval 12

  • British Dictionary Not Showing!

    Can anyone help?
    I have set my iPhone keyboard to British English but when I select a word say "Authorise" and get the definition it is giving me the American dictionary, how do I get the Bristish dictionary?

    This is absurd... I restarted my computer after days of having it turned on or in deep sleep, and funny enough my dictionary came back.
    I'm now blaming myself for not having tested this VERY simple troubleshooting solution the first day it appeared.
    Ho well, lesson learned.

  • Built in ethernet not showing in network preferences

    A friend has been experiencing random dropouts via airport, as a workaround she has been using a direct cable to the adsl router from time to time. Now all of a sudden she cannot see the ethernet anymore.
    In network preferences ethernet is not displayed in the network status, regardless of whether a cable is inserted or not.
    About this mac lists an ethernet adaptor and ethernet is enabled in the network port configurations in the preferences.
    Dis/enabling the ethernet in network port configurations has no effect neither does repair disk permissions.
    The machine is less than a year old, fully updated and still under warranty, anything else she can try?

    did you fixed the problem?
    i am having something like you where the ethernet worked for a while and then it was greyed out... and i went as far as formating my computer and reinstalling os x... but now the computer thinnks i don't have a ethernet card...
    http://discussions.apple.com/thread.jspa?threadID=1205856&tstart=0

  • Sound - My built speakers do not show in the output section in sound system preferences area only digital out hence unless I connect external speakers I have no sound - can anyone assist?

    on my IMac the internal speakers have ceased working - in the sound preferences area only digital out sound is there no internal speakers to choose so unless I connect external speakers I have no sound

    Hey Jack (woofman jack)
    Sounds like the micro switch inside the output jack that switches the audio from internal to external is stuck on external. Try plugging a set of buds, headphones or digital Toslink adapter in and out a few times to see if it will unstick the micro switch. You also might try jiggling a tooth pick around inside the audio output jack to see if that unsticks it? If not then you'll need to make an appointment at your Local Apple Store or Apple Service Provider and have the jack serviced.
    Dennis

  • Built-in speakers not showing in sounds or System profiler

    Hi all,
    I've just bought a 2nd hand eMac 1Ghz model. Having logged in and checked over the installed software (just the basics) and connected to my home network, I tried starting up iTunes to listen to internet radio. I noticed that there was no sound, although I hadn't noticed the lack of startup chime! First thing I checked was the volume, which was set to max, and then popped in headphones - which work. I checked the options in Sound and noticed that all that is listed for the devices is the headphones. After a bit of searching online I found suggestions to Archive and Repair OS X, which didn't solve the problem, I then did a clean install of OS X and used the System Restore discs that came with the eMac to re-install all the software. Again, no joy. After another search online I spotted a suggestion here regarding System Profiler, so I checked this and found that there is no Audio listing under Hardware.
    Can anyone suggest what I can try to get the speakers appearing, and working again? I'm a bit of a novice with Macs, although I've worked on a G5 previously, this is the first Mac I've owned! With a PC I'd expect it to be a case of a loose soundcard, but I haven't the foggiest where to start looking inside a Mac!
    Thanks in advance!

    This is a long shot. On some Mac laptops, an out-of-spec phono-plug can jam a contact within the jack in the "mute speakers" position and exhibit the symptoms you've described. The first check is to shine a light into the jack to see if there is a foreign object present.
    Although the affected jack on the notebooks is a newer technology, you might try the lo-tech fix that usually works on the newer units: insert a standard mini-plug and GENTLY wiggle the plug in the horizontal plane. If that doesn't restore sound when you remove the plug, try the same thing but wiggle in the vertical plane. Last is to wiggle the plug in a circular motion.
    Worth a try. The fact that the headphones work pretty much precludes the sound hardware (soldered to the logic board) from being the culprit. You may find that using a cheap set of external speakers is the better-sounding option and MUCH easier than taking an eMac apart. I have a pair of "no-name" speakers I picked up for US$2 at a yard sale that are far better than the little internal speakers.

  • The built-in dictionary on my iPad only works with certain sites.  What do I need to do so that I can it all the time. (For example, it does not work when I read e-newspaper.)

    What do I need to do so that I can use the built-in dictionary all the time? My iPad 2's dictionary functions on Japanese e-newspapers but not on the Arizona Republic or other e-newspapers.

    Rikirannu wrote:
    My iPad 2's dictionary functions on Japanese e-newspapers but not on the Arizona Republic or other e-newspapers.
    Are you talking about the English dictionary?  Mine seems to work ok on the AZ republic web page.  Does yours not work on all webpages?  Does it not work when you type an English word in Notes and then do select and define?

  • Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

    Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

    Have you tried the standard fixes:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPod to factory defaults/new iPod.
    If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

  • I downloaded Firefox 4.0. Spellchecker is included and I have downloaded English Dictionary as Addon. It does not work on website. Spellchecker does not show up in Context Menu. I have tried every other source. Can you help please?

    I understand that Spellchecker is pre-installed but I cannot verify this is the case with v.4.0 Firefox. I have right-clicked on webpages and it does not say Dictionary is missing, so I assume the problem remains with Spellchecker. I expected to find Spellchecker and Languages under Edit in nav bar but it does not show up, What must I do? Richard

    That should work on a Mac as well.
    You did download and install the French version?
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • HT3964 My built in video on my MacBook Pro is not showing up on Photo Booth or Skype. It seems like it may be disabled? Any idea how to fix this?

    My built in video camera on my MacBook Pro is not showing up on Photo Booth or Skype. It seems as if it may be disabled. Suggestions on how to fix this?

    http://support.apple.com/kb/HT2090 

  • Built Flash Video and will NOT show in Hosted Environment

    Built Flash Video and will NOT show in Hosted Environment.
    The files generated work on development machine. I posted the same
    files in hosted environment and flash will not show. I first
    thought it was Vista 64 IE 7 so I switched to XP IE7 and same
    results. Still it is strange the falsh works locally. I am sure it
    is something simple that I am missing. Any help would be
    appreciated. Thank you.
    Stan

    Nickels55, I appreciate the response. Here are the
    interesting facts. I had my hosting provider apply the mime type
    and restart IIS. No flash video. I have Vista x64 Ultimate with I
    think IIS 7 (the default IIS that comes with the OS.) The flash
    video would not show in that environment until I applied the MIME
    and then it WORKED. Yeah! But I still don’t have it working
    on my web hosting provider with server Win2003. I thought it was
    the hosting provider but I posted on my work server Win 2003 and
    changed the MIME with a reset and could not get the video to work
    there either.
    I would like to try another angle here. Again I am using the
    wizard to encode and publish the flash video. Maybe I don’t
    have a settings correct. I can approach this a few ways.
    1.) I can send my video to someone to post on their Win2003
    server and see if they can get it going.
    2.) Someone send me a short 3 second video that they produced
    that they know it works on Win2003.
    3.) Any other ideas? Surely someone in this universe has used
    the flash wizard to encode a video and published to a Win2003
    server. :)
    I guess the other thing to note is when creating the flash
    video I chose no controls (play, stop, pause). I want the video to
    start when someone accesses the page for the first time.
    Thank you for the help everyone.
    Stan

  • Bulk add words in highlighted text to built-in dictionary

    Is there a 3rd party utility, OSX Service, or AppleScript that would allow me to highlight a block of text (might be a full document) ... parse out all the words, and add any words not in the built-in dictionary to the built-in dictionary ... ideally with a list of automatically added words.
    Use case: I'm working with a bunch of technical docs that have been editorially reviewed and spell checked on other systems. When I go to edit these documents on my OSX Mavericks applications, tons of correctly spelled words show up as misspelt. Manually clicking through many pages of content to add new words is not efficient.
    I googled this question and learned that I could manually edit my list of words in ~/Library/Spelling/LocalDictionary. That's a good tip, but I'm looking for the word parsing, dictionary check, and dictionary add workflow not just the location of the dictionary.

    Hi Julian,
    Is this you asking?
    var doc = app.activeDocument;
    app.findTextPreferences.findWhat = "figure";
    var found = doc.findText();
    for(var i =0;i<found.length;i++)
            doc.xmlElements[0].xmlElements.add({markupTag:"figure", xmlContent:found[i]});
    Regards,
    Chinna

Maybe you are looking for