Built in FlashPaper

Hi
I want to know whether the Macromedia FlashPaper 2 is comes
with as built in feature or plugin with any of Adobe software like
Photoshop CS3 or CS4 or. i have to Purchase Separately.Please Let
me soon

Finally found the problem and it's probably more simple than i previously thought. Although resetting the SMC, cold start and etc is probybly not such a bad idea any on an older machine to clean away the dust! it doesn't actually solve the problem we're discussing.You need to check which programs could be using, blocking or have changed isight priorities. After checking all programs i've installed since i can last remember using my camera I found i'd overlooked Airparrot. I'm afraid that if you install Airparrot then you'll likely lose iSight functions. Airparrot blocks video functions. Great eh.You need to completely uninstall it, drivers and all. Simply using the Airparrot uninstall tool didn't do the job for me. Airparrot's uninstall tool has a delete drivers button but it didn't work. I needed to use Terminal to delete the drivers.
If you havn't used the Terminal before then maybe you should read up first but you'll need to set a password to use the sudo actions. If you don't have one you can set a temporary one and set it back to blank again if you're not into using passwords for home use. Here are a couple of links that will explain everything:
http://support.airsquirrels.com/article.php?id=8
http://www.youtube.com/watch?v=r4D3eFf3y64
Good luck. It worked for me!

Similar Messages

Converting uploaded documents into FlashPaper

Hi all,
i have a doc management system, in which i want to convert
all the uploaded docs into FlashPaper. The input docs will be in
different formats like PPT,DOC,PDF etc. is there any server side
API to do tat? i dont want the user to be aware of what conversion
is happening at the server. I have built the system in PHP, Please
help me out.
TIA

Hi,
I think you have startged two discussions for the same question:
Please check the below mentioend
http://forums.adobe.com/message/5318601#5318601
~Pranav

Embed a PDF Viewer in a webpage (FlashPaper?)

Hello,
I am a creative cloud member, primarily using Dreamweaver, Photoshop at the moment. My client would like to have a embedded PDF viewer similar to the on on this link: http://www.blurb.com/books/5607793-zunior-eats-hard-cover
(I've seen info about something called FlashPaper and understand that it's been discontinued.) My questions is does Creative Cloud offer something that could achieve this without a ton of coding? I've found a couple of options if not, but would love to use and promote the creative cloud suite.
Thanks.
JS

No. Why even bother? Safari, Chrome and Firefox have built-in PDF viewers and even Internet Explorer is getting one in v12 according to rumours and you can of course always install Reader/ Acrobat. You also seem to misunderstand something - that Blurb stuff is all based on web techniques using their proprietary APIs, not PDF.
Mylenium

Is FlashPaper right for my needs?

I have a CD-ROM menu I've built in Flash, which is compiled
into an application with MDM's Zinc. In the menu, there's several
links to separate legal documents in PDF format. You click the
link, the PDF opens from the disk. Easy.
Recently, there was a federal rule change and my client can
no longer have separate documents on this disk and everything must
now be in one PDF document. That creates a problem for me because
they want the menu to now link to specific pages within the large
PDF document. There is a way of doing this through Zinc but it's
been very inconsistent when I've tested it. An associate
recommended FlashPaper as a solution and thought I would be able to
click a link in my menu and go to a specific page within the
document.
So, would FlashPaper be able to do what I need it to? Has
anyone had any issues working with a compiler like Zinc? I see that
FlashPaper is for PC only, will that be a problem for the menu
since I developed it on a Mac?

http://www.adobe.com/products/flashmediaencoding/

Resolution of built-in display with dvi adapter

I've connected my Imac to my Samsung DLP using a mini-dvi to s-video adapter. The display on the tv is fine, but the problem is that when ever the adapter is plugged in, I lose all widescreen resolutions for the built-in display. Does anyone know a way around this? If I used a mini-dvi to vga or hdmi adapter instead, would it do the same thing?
Thanks,
Julie

Then leave the adapter connected to the Mac for two reasons;
1. to prevent having to Detect and Adjust everytime it is connected.
2. to prevent ware and tare / damage to the Mac's Mini DVI port.
Mirroring will always cause the Mac's resolution to change, the system is using the best resolution to support both Mac and TV display's.
[Apple TV|http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?nnm m=browse&mco=9509DA20&node=home/ipod/apple_tv] might be the best solution considering the TV is setup in a different room.

How can I display and change built-in symbols of a tree control programmatically?

I want to set the built-in symbols of a tree control during runtime.
I only found an example to assign custom pictures but not how to select one of the 40 built-in symbol.
Many Thanks
Solved!
Go to Solution.

The ActiveItem.SymbolIndex will allow you to select the symbol for the active item. You can use the ListBox Symbol Ring Constant (Dialog and User Interface palette) to select a symbol (or you can just enter the number directly if you know what it is).
Message Edited by smercurio_fc on 07-10-2008 09:36 AM
Attachments:
Example_VI_BD6.png ‏2 KB

How do i remove image links to adobe site with my dreamweaver built flash gallery ?

This is probably a very simple solution, but i can't figure out how to remove the link to the adobe site when you click on the images in my gallery--I built a site in dreamweaver used the insert media option and added my photos---when uploaded, my images in the gallery are clickable and take you to the adobe site...how do i make the images have no link??
here is an example of one of the pages...
http://geckoweb.org/coleonyx-brevis.html
any help is really really appreciated.
thanks in advance

Which version of DW are you running?
There are plenty of jQuery solutions and commercial plugins to create photo galeries.
Some require hand coding,
http://www.typeerror.com/index.php/top-10-latest-jquery-image-galleries/
https://www.google.com.au/search?q=jquery+photo+galleries
others are point and click inside Dreamweaver.
http://www.projectseven.com/products/galleries/index.htm

My laptop no longer detects my built in webcam

I have an HP G60-635DX notebook. I have a built in webcam which I have used several times before, but now all of a sudden my laptop is not even detecting I have a built in webcam. What to do? I have a Mobile Intel 4 Series Express Webcam. It bums me out. It is the only way I can talk to my boyfriend face to face while he is out of town and now it is not even working!

OK, to start with, may I know if you can you check using webcam with Cyberlink Youcam Software & if webcam is listed in device manager under imaging device....
To get to device manager, follow the below steps:
Click on the Start button and then choose Control Panel.
Click on the System and Security icon.
Note: If you're viewing the Large icons or Small icons view of Control Panel, you won't see this link. Simply click on Device Manager and then proceed to Step 4.
In the System and Security window, click on the Device Manager link located under the System heading.
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

HT3625 i can not see the line in/built in input on the menu?do you know why?

i can not see the line in/built in input on the menu?does anyone know why?
i am trying to broadcast a live dj mixing but with the set up, i cant find the lin in input not even on the menue.
any clues will be appreciated.

see shots from '11 to '12 going forward.

Can not replace the built in XSL Transformations

I have a web app which uses Xalan (2.3.1++) runnin on 7.0.0.1. It runs fine in
WL 6.1 using the weblogic transformer. However, when porting it to 7.0 I keep
getting exceptions such below. What worries me is that I have replaced the XML
Registry (see attached file) with the actual xalan classes.
Are there other steps to replace the registry?
javax.xml.transform.TransformerConfigurationException: javax.xml.transform.TransformerException:
javax.xml.transform.TransformerException: Did not find the stylesheet root! at
org.apache.xalan.processor.TransformerFactoryImpl.newTemplates(TransformerFactoryImpl.java:995)
at weblogic.xml.jaxp.RegistryTransformerFactory.newTemplates(RegistryTransformerFactory.java:175)
at

The web controller lists cameras that are bound to Podcast Producer. It cannot list ad-hoc sources, which usually includes the built-in iSight camera. If you were to bind your camera to Podcast Producer using the Podcast Capture application, it will show up in the web controller.

IMovie '08: Built-in iSight camera not recognized in Yosemite

On this page
http://support.apple.com/en-us/TS2472
iMovie '08: Built-in iSight camera not recognized
it says:
In Finder, navigate to /System/Library/LaunchDaemons/
Select the file com.apple.mio.VDCAssistant.plist and delete.
Restart your system.
You should now be able to use your iSight camera with iMovie.
However, in Yosemite, it only has this file name
com.apple.cmio.VDCAssistant.plist
and I don't want to delete it as instructed without someone who knows telling me it won't hurt my newly installed and thus far working well OS 10.10.1, with iMovie 7.1.4 on my iMac 24 inch, Early 2008, 2.8 GHz Intel Dore 2 Duo, 2 GB 800 MHz DDR2 SDRAM. It worked with Leopard, and I don't recall having to use the above mentioned support page.

Contact Apple. I believe you have a hardware issue there if it's not showing up in your System profiler.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

Voice over tool & built-in audio

When I open FCE, I routinely get a message "unable to locate built-in audio." I ignore it and continue, so far as I know without any bad consequences for my projects. Sound input and output seems fine, except when I try to use the voiceover tool.
My mic is hooked up through a Tascam US-122 usb connection. Indicator lights on the usb interface show that the mic is working, and the sound preferences panel also shows the sound from the mic coming into the computer at normal levels (the input levels indicator lights up when I speak into the mic)
My voiceover tool settings are Tascam US-122 for source and for input. My output is set for headphones. Adding to the mystery is that on rare occasions, after trying many changes in settings and closing/reopening the project, the voiceover tool will suddenly work properly (I haven't been able to isolate a cause). Today, however, nothing I do seems to help. I recently upgraded to osx 10.4.10, but the problem existed long before that. Any suggestions?

Hi(Bonjour)!
There is an issue with some USB based sound devices and FCE HD.
You can use Soundflower pref panel to allows virtual "rewiring" of your audio from input source to output destination. That may resolve your problem.
Search this forum with "soundstick, USB, soundflower" keywords.
Michel Boissonneault

Is there a way to use dynamic built string in the "from" clause

Hi all, im having one problem and now, im not sure how to solve it easily at all... :) Is there someone that would be so kind and put a eye on it? ..thx
I have plsql proc, in which i have a list of table_names. For each of that table i need to run a query that will retrieve me a list of values and for each of that value i need to do something.
If i can be more specific about the problem -> each of that table is built as key_column, value_columns, day,starttime. For a key per table there are 4 records per hour - every quarter. Im truncating those quarters to full-quarter (minutes => 0->14 = 0min; 15->29 = 15min, 30->44 = 30, 45->59=45)
example
i get for one key and specific hour four records at 15:01;15:16;15:31;15:46 => i truncate em to 15:00;15:15;15:30;15:45..Sometimes there is a problem with the tool that is generating those data for me, and one quarter could be moved a little - so i get data like 15:01;15:16;15:29;15:46 => after i truncate the times i get duplicates in second quarter. It also can happen like this : 23:00; 23:14; 23:29; 23:44; 23:59 => totaly bad => cos the last one supposed to be as 0:00 next day, ..and 23:14 as 23:15...So...that was a problem - and solution -> i wanted to create plsql that will find those hours in each table i ve defined, and for each problem hour i make some fixes - update the bad time ...
..and i have problem - can i put an dynamic built table_name in the "from" clause?
example how i wanted to do that:
declare
     type t_objectName     is table of varchar2(030) index     by pls_integer;
     l_tableName              t_objectName;
begin
l_tableName(1) := 'tmphlrgl';
l_tableName(2) := 'tmprcfgl';
l_tableName(3) := 'tmprcfbs';
l_tableName(4) := 'tmpvlrgl';
for i in (select evtime from (select day,trunc_quarter(evtime) evtime,m_id from l_tableName(i) group by day,trunc_quarter(evtime),m_id having count(*)>1) order by evtime) loop
--some other conditions and the update...
end loop;
end;
/I cannot use the l_tableName(i) for FROM ...get an error...I was thinking to build it as dynamic sql and execute immediate into some kind of object that can store mutliple lines, from which i would in the FOR cycle get the data...But im not sure if this could be done in plsql...
thanks for your time and help..
d.

declare
c sys_refcursor;
begin
for i in 1..4 loop
open c for 'day,trunc_quarter(evtime) evtime,m_id
from ' || l_tableName(i) ||
'group by day,trunc_quarter(evtime),m_id having
count(*)>1) order by evtime';Just to high light SELECT is missing that all
OPEN c FOR ' SELECT day,trunc_quarter(evtime) evtime,m_id
          FROM' || l_tableName(i) ||
'GROUP BY day,trunc_quarter(evtime),m_id HAVING count(*)>1)   ORDER BY evtime';

Can we use the built-in Row fetch for Multiple reports in a page?

I need to create a page with multiple report regions. Each of it is based on a table. Those tables are different. I somewhat remembered that we can NOT use the built in automatic row fetch process if there are multiple report regions, neither the built in DML process. You have to make your own fetch and insert/update/delete process if you intend to.
Also if I write my own row fetch and update processes, do I have to consider lock mechnism? or just simply write select and insert/update?
Any input is appreciated.

I think I found the answer. Would Scott or other gurus take a look at the thread and confirm it, in case the limitation is not in 2.0?
Re: automatic row fetch
What I am concered about is that the locking mechanism. If I have to write my own process to fetch and insert/update, other than the regular select and insert/update statements, do I have to put commit by myself, or htmldb can handle it automatically? Is there an example for this?
Thanks in advance.

Subtotal issue when subtotaling on a calc field built using CASE function

Okay, I hpe I can explain this well. May be possible that this is something cannot handle in Discoverer. I am using Discoverer Plus to develop a new workbook - cross project expenditure inquiry. A requirement is to not allow a worksheet user to see labor cost (since possible to figure out someone's salary) amount unless they are allowed to view labor cost. I have a function that returns a Y/N value that tells me if they can view labor cost. That works out just fine. So what I am doing is taking my database cost column (which is defined as Number(22,5) in the Oracle table. I create a new calculated column, basically like this -
CASE WHEN expenditure type <> LABOR THEN cost WHEN view labor cost = 'Y' THEN cost ELSE NULL END.
That calculated column is working just fine. I am seeing my desired results in that column. Okay so far.
Next, the users want subtotals by project organization and project. So I created a new total. When I did that, my subtotal row amount is blank.
Okay, I have seen this happen with NULLS before. Like in the gl_je_lines tables, where the accounted_Dr and accounted_Cr may be null, and have to do a NVL function to convert the null to 0 and allow me to subtotal on the column in a Discoverer workbook.
So I tried creating a second calculation -
NVL(Cost,0)
So I return the cost if not null, otherwise I return 0. Second calc column results look okay.
Now I did a subtotal on the second calculation. Oops. Wrong result. Amount is shown as 0.
For grins, I went back to my CASE statement on my first calculation and changed the ELSE condtion from NULL to 0. When I did that, the subtotal on that column changes from a blank (Null) value to a 0 value. Well, better, but still just like my second calculation subtotal.
Obviously the users have the option to export to Excel and subtotal in Excel.
Does anyone know of a way to get a good subtotal in this kind of situation, where I am attempting to subtotal on a calculated field that is built on a CASE function? Or am I out of luck when it comes to Discoverer?
John Dickey

Okay, I did find a workaround, though I do not understand why the workaround works, but why the way I first tried to get a subtotal did not work. What I did is that I had to go to Discoverer Administrator. I picked my folder and did an Insert/Item. I created my new item building the same CASE statement that I used in my worksheet to create a new calculation. I then closed Discoverer Plus and reopened Discoverer Plus. Opened my worksheet. Edited the worksheet and brought in my new (derived) item from my folder. Then I created my subtotals for this secured cost amount. Voila. I get a number now, and the subtotal amount appears to be correct (still testing/verifying, but looks okay so far). So I deleted my subtotals on my calculated column and then deleted the calculation, to get that stuff out of the report. Sure would be nice if there was documentation in the Discoverer manuals about this.
John Dickey

Built in FlashPaper

Similar Messages

Maybe you are looking for