Built in Isight not detected in USB

Hi,
I got the new IMac now and was using the isight. Had funw ith it and suddenly after I updated my system, Isight refused to work and the common error that everyone has" photobooth, cam used elsewhere" came in. So I checked the docs and found out that the cam is not detected in the USB list in the system profiler. Now how do you fix that??
Any help is welcome.
Thank you

You are welcome, Ebenezer.
However, while I understand that you are frustrated, I am not certain that I understand the attitude or intent of your posts here.
And another thing...Kindly see that the right SMC should be 1.1f5 but mine is 1.6f0... we dont have support from Apple...
Perhaps you mistakenly believe that I work for Apple. I do not.
Apple makes these Discussions pages available as a place where users can share information to help other users. Like most others who post here, I am not affiliated with Apple in any way except as a retail customer of theirs.
As explained in the Discussions Terms of Use, Apple employees will be so identified.
If you have comments or suggestions for Apple, you may send them directly by submitting Apple Product Feedback. For the problem you pose in this thread, I suggest that you use Mac OS X Feedback. Perhaps you believe it to be more relevant as iMac Feedback. Either will go directly to Apple.
If, after you have tried reapplying it, you believe that there is a problem specifically with the iMac EFI Firmware Update 1.1, you can copy the relevant parts of your writing from this thread and paste it into appropriate Product Feedback to be certain that Apple will see your comments.
Contacting Apple for Support and Service includes contact info for India.
I will be pleased to try to help further in any way I can.
Respectfully,
Jim

Similar Messages

Built-In iSight NOT detected on my Windows XP!!

My built-in iSight is not being detected in my windows when I want to video chat on AIM or skype. Under My Computer, there is nothing under Scanners and Cameras. But on the Mac OS X side of my OS, I can use iSight with iChat. I do NOT use Parallels, but I have two operating systems on my computer. Please help!

Welcome to Apple Discussions, Brittany Tu
I have not used Windows for about eight years now, so my first suggestion will relate to Mac OS X.
(1) You can boot your Mac into OS X and use its iChat AV for chatting with your AIM friends. If you need help, here's how:
• While running in Mac OS X, quit all running applications
• Launch iChat on your Mac
• Choose the iChat > Help > iChat Help menu item
• When the Help window opens, click the "A new way to video conference." link
• See the help instructions there.
If you need more help, click here for Apple's Mac 101: iChat AV tutorial.
By the way, you do NOT need to use AOL or have AIM software installed on your Mac to use iChat AV in Mac OS X to connect with other iChat or AIM users. You only need iChat AV and the AIM Name you already have (or, if you do not already have one, you can get a FREE AIM Name here.)
(As an alternative to an AIM Name, if you have an Apple .Mac name (either a Free Trial or paid account name is OK), your dot Mac account name will also work as your iChat account (buddy) name.)
If you want ALL the info about iChat, see Ralph's iChat FAQs:
http://www.ralphjohnsuk.dsl.pipex.com/index.html
(2) For Skype, you can download the free Mac OS X versions of Skype while you are booted in Mac OS X on your Mac. The Mac version of Skype is easy to configure and set up, and it works with your existing Skype account info for connecting to your existing Skype contacts. If you have difficulty, see the Mac OS X help info in Skype's Help pages.
(3) If you are using Windows XP via Boot Camp on your Mac, the iSight drivers are contained in the driver CD that you create for the Boot Camp install. After you have read the instructions and created the driver CD, use that driver CD to install the driver for the built-in iSight in the same way you would add any other driver for XP.
(4) If you are using Windows XP via some other method or need to post back for more suggestions, be sure to include your system info including which specific Mac and Mac OS you are using. Also post what virtual PC emulator you are using to create your Windows XP environment. The more specific you can make your question and system info, the more likely you will get a useful answer quickly.
We will be glad to try to provide other suggestions based on the details of your response.
EZ Jim
PowerBook 1.67 GHz Mac OS X (10.4.10) G5 DP 1.8 External iSight

Built in iSight Not Detected

Hi,
Having an issue with my MacBook Pro where in iMovie, I am not able to select my built in iSight as an input source to record with (Camera Not Detected). Photo Booth works fine, and the issue recurs in a clean account.
I have no problem with this software on both my MacBook (2008) and iMac (2006), running the same OS version. I'm assuming this has something to do with the new hardware.
Apple Support claims that the software is incompatible with Snow Leopard, but is working fine otherwise. Just wondering if anyone here has had the same problem and has been able to shed some light as to why this occurs/ how to fix it.
Thanks!

iMacOwner wrote:
Hi,
Having an issue with my MacBook Pro where in iMovie, I am not able to select my built in iSight as an input source to record with (Camera Not Detected). Photo Booth works fine, and the issue recurs in a clean account.
I have no problem with this software on both my MacBook (2008) and iMac (2006), running the same OS version. I'm assuming this has something to do with the new hardware.
Apple Support claims that the software is incompatible with Snow Leopard, but is working fine otherwise. Just wondering if anyone here has had the same problem and has been able to shed some light as to why this occurs/ how to fix it.
Thanks!
I do not have the problem and I cannot shed any light as to "why" you have the problem, but here are my best thoughts based on your info.
I often use iM6HD for quick iSight clips on MacPro using the iSight built into my LED Cinema Display. iM6HD works as well with my MacBook Pro. Both run SL.
I sometimes see strange color blinks in the preview window *before I begin to record*, but there is no problem while I am recording.
My inbuilt iSights shows up in the camera selection button just as it did in previous Mac OSs.
Have you selected "iSight" when you create your new movie project?
Are you observing the prohibition against running another camera apps when you open iMovie?
http://support.apple.com/kb/HT3095
Have you restarted the Mac?
I see you have tested in a "clean account". If that means a new user account, my only other thought would be whether a clean install of the OS with NO other software additions might give any insight?
If nothing helps, you may be right that there is something special about the new hardware.
If that is the case, why not capture your iSight video in SL's QuickTimeX? Then import the clip into whichever iMovie/editor you like for editing.
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

Built-in iSight not detected by iMovie HD

iMovie HD 6.0.3 doesn't detect my MacBook Pro's built-in iSight camera, despite the fact that it works fine with iChat AV, Flash, and WengoPhone. It displays the message "No Camera Attached" and only "Time Lapse..." appears on the camera selection list.
I have checked that no other iSight-enabled applications are running before starting iMovie, and reinstalled iMovie and restarted multiple times. Does anyone have any suggestions for how to fix this?
Thanks in advance for your help!

Welcome to discussions!
Did you try all of these suggestions?
How to Troubleshoot iSight
http://docs.info.apple.com/article.html?artnum=93240
Also, make certain that your applications are updated to the latest versions. (Software Update from Apple)
Sue

Built-in iSight not detected in main account but ok in another one

Hello,
After I have updated my macbook pro to MAc OS X Lion from MAC OS X 10.6.8, the webcam worked ok for one day, and then for unknown reason, I couldn't use it any more.
The error occue with both two apple apps I have tested, Photobooth and facetime. It just give an error message telliing that the webcam is not connected.
I have tried to remove preferences folder from ~/Library to get it rebuilt but no joy
If someone can help ...

Hello,
After I have updated my macbook pro to MAc OS X Lion from MAC OS X 10.6.8, the webcam worked ok for one day, and then for unknown reason, I couldn't use it any more.
The error occue with both two apple apps I have tested, Photobooth and facetime. It just give an error message telliing that the webcam is not connected.
I have tried to remove preferences folder from ~/Library to get it rebuilt but no joy
If someone can help ...

Built-In iSight NOT RECOGNIZED after EFI Update 1.1

After updating to EFI 1.1 on my iMac 20 Inch (2,16Ghz) the built-in iSight-Cam is not
working anymore. It´s not showing up in the system profiler > USB Devices.
I bought the iMac last week, switched it on, the cam took a picture on the user account creation,
I applied the EFI-Update and OSX 10.4.8. After that the cam was gone.
I tried everything from resetting SMC, PRAM to reinstalling Combo-Update 10.4.8 ... NOTHING helped !
Any ideas or solutions ???
P.S.: Sorry for my crappy English, I´m writing from Germany !

Here´s a report from MacFixIt.com about this problem:
http://www.macfixit.com/article.php?story=20061211231332862
Built-in iSight not recognized Some users have reported loss of their built-in iSights after applying the iMac EFI Firmware Update 1.1. In some cases, this issue can be resolved by resetting the SMC (system management controller) using this process:
1. From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
2. Unplug all cables from the computer, including the power cord and any display cables.
3. Wait at least 15 seconds.
4. Plug the power cord back in, making sure the power button is not being pressed at the time. Then reconnect your keyboard and mouse to the computer.
5. Press the power button on the back to start up your computer.
Resetting PRAM can solve a variety of issues As mentioned in our coverage of recent EFI Firmware updates issued for other Macs, a number of potentially serious issues apparent after applying this EFI Firmware Update can be resolved by simply resetting PRAM/NVRAM via the following process:
Shut down your Mac, then start it back up while immediately holding the following keys: Command, Option, P and R. Hold the keys down until the computer restarts and you hear the startup sound for the third time.
This workaround is a good first course of action before exploring more complex fixes. It should also be attempted if your system cannot properly startup after applying the update.

HT1529 MY DONGLE IS NOT DETECTING IN USB PORT

Sir,
1. My dongle is not detecting in USB port; what to do?
2. How I can go to My Computer (like Windows) so that I can see filing system memory status?
3. For extending warranty what is the process?
Regards,
Subrata Dey

Assuming yu have a PC try:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
iPod not recognized in 'My Computer' and in iTunes for Windows
iPod: Does not appear in Windows or iTunes and Device Manager is empty

USB 2.0 Stick not detected on USB 3.0 port

Hey, When I plug in an USB 2.0 Stick into the USB 3.0 port of my T550, it is not detected. USB 3.0 harddisk works. I am working with Windows 10 64 bit.BIOS is updarted to the newest version. Thanks!Nathan

Hello. This is Kimberly from the customer experience team at Lenovo. Sorry you are having an issue. The product manager for T Series suggested the following: We assume that the USB 2.0 drive you are trying to connect functions in another computer. It is probably a formatting issue or a USB Registry Key Conflict. If reformatting the USB drive doesn't work, search for USB registry cleaner tools online to remove any conflicts/corrupted USB registry keys. Also, Microsoft may have some support tools to clean the USB registry keys

Help!!! Built in iSight Not Functioning on Brand New 24" iMac

I just purchased an iMac 24" 2.16 Ghz Intel Core 2 Duo Processor computer, and the built-in iSight camera will not function.
The store that I bought the computer from, informed me prior to purchase that several previous customers experienced the same problem, and that I should return to the store should I experience the same thing.
Is there a software fix for this????
Is there a preference fix for this???

As stated. I followed the Apple Support webpage instruction listed below. Still no success. My isight will not function with any other application (ie. iChat, iMovie, PhotoBooth, etc...)\
G5 (iSight) or later, the MacBook, or MacBook Pro.
1. See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
2. See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
3. Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
4. Reset SMC or PMU Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.

Presario CQ 71 - Built in Webcam not detected under Windows 7 Professional - No HP-101 device

I have a Compaq Presario CQ 71 EB400. On this notebook I run both Windows 7 Home Premium 64-bits and Windows 7 Professional 64-bits to compare behaviour of apps and windows features in both environments.
Windows 7 Home on my HD C partition
Windows 7 Professional on my HD F partition.
The CQ 71 has a built in Webcam, that shows up under Windows 7 Home premium Device Manager - Imaging Devices (Cameras and Scanners) as HP-101, linked to the required drivers.
Under Windows 7 Home premium:
- The built-in CQ 71 Webcam is detected and operational - the HP-101 entry is present in Device Manager.
- Applications using a Webcam like Skype, Mycam, Manycom etc connect with the Webcam
- When I plug in an external Webcam, thet webcam is detected as well, drivers loaded etc.
Under Windows 7 Professional:
- The built in Webcam is not detected, in the Device Manager -Imaging Devices, the HP-101 Webcam entry is absent
- Skype, Mycam, Manycam cannot find a Webcam (also not when an external USB Webcam is plugged in)
- A plugged in external Web cam is not detected as an imaging device.
I use a Brother printer/scanner/fax machine, the Brother scanner device is visible as Imaging device in Device manager in both Windows 7 Home premium and Windows 7 Professional.
Other USB devices, portable disks, card readers etc seem to work OK in both Windows 7 environments.
The HP support pages provide information what to do when a internal Webcam is not detected; The recommended actions make no difference. Going back to a previous W7 Prof restore point is no option, as on the CQ 71 notebook the built-in Webcam never functioned under W7 Professional.
The major difference is that all Windows 7 Home Premium relatede system software resides on the C partition, all Windows 7 Professional system software on the F partition.
I'm looking for a way to kickstart the built in CQ 71 Webcam under Windows 7 Professional installed on a non-standard partition.
Your suggestions will be very welcome.
Jan Dijckmeester.

Hi again jdij,
It is good to hear back from you!
To enable your system to detect the Webcam in Windows 7, I recommend re-installing the original drivers and software that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). To update the newly installed software, please follow this resource on Using HP Support Assistant (Windows 7).
If the webcam is still not detected, I recommend returning your system back to a previous restore point. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 7).
Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 7), as well as Performing an HP system recovery (Windows 7). This should return your system back to factory defaults.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Built-in iSight not working-black screen with every application

I have a MacBook laptop version 10.6.2 and just recently my built-in isight stopped working. i've had this laptop for about 2 years now and there have never been problems with the isight. i downloaded skype because i tried using ichat and my friends computer wouldn't video chat when i used ichat, but when i used skype it worked. so i've been using skype for about a month now... and just recently, i'd say like 2 weeks ago i went to use skype and the screen was completely black. the sound works, my friend said she could hear me she just couldn't see me. so i went into photo booth to see if the camera worked with that, and its a black screen on that app too! and when i take a picture it counts down like it normally would, but it doesn't even produce a picture, just a blank in the line of pictures at the bottom.. i also went into ichat and it has the same thing-black screen. i think the computer detects the camera, because it never said that it didn't... just the screen is always black.
just some other info.... when i go to use an application that uses isight, the green light on the right side of the camera lights up.. nothing else really happens though.
any information or diagnostic would be most appreciated!! thank you!

http://support.apple.com/kb/HT2090
my isight camera is not working-not recognized with photo booth or ichat

Built-in iSight not working with Skype

Hi, I have an iMac Intel Core with Built-in iSight, and ever since I've upgraded to Snow Leopard OS, my Skype does not recognize my webcam- when I select the "Built-in iSight" option, it says it is in use by another applications, and when I select the "Built-in iSight (leopard)" option, it's just a green screen.
I've tried reinstalling, updating, and calling Apple. My friend uses Skype on Snow Leopard with a MacBook Pro 13'' and his works fine.
Any help would be greatly appreciated.
Thanks in advance,
Jonathan Borichef

jborichef wrote:
Hi, I have an iMac Intel Core with Built-in iSight, and ever since I've upgraded to Snow Leopard OS, my Skype does not recognize my webcam- when I select the "Built-in iSight" option, it says it is in use by another applications, and when I select the "Built-in iSight (leopard)" option, it's just a green screen.
I've tried reinstalling, updating, and calling Apple. My friend uses Skype on Snow Leopard with a MacBook Pro 13'' and his works fine.
Any help would be greatly appreciated.
Thanks in advance,
Jonathan Borichef
For any iSight trouble, start with Apple's http://support.apple.com/kb/HT2090
If your iSight problem occurs in more than one app and more than one user account, the reset suggested there often restores proper function of inbuilt iSight.
However, if after carefully following all the suggestions in the "How to Troubleshoot iSight" article, your built-in iSight still does not work, and if it does not show as a USB device in your Mac's System Profiler, yours is most likely a hardware problem. In that case, contact Apple or an Apple-Authorized Service Provider for service.
If Skype is your only problem app, you can get help for Skype specific questions here:
http://www.skype.com/help/guides/
Skype even has its own dedicated forum for help from Skype users: http://forum.skype.com/
For any Skype questions or problems, you will probably get faster and better help from the Skype users or Skype Tech Support. Search or post in the appropriate Skype Support area.
If you still cannot find what you need, check https://support.skype.com/search_first/
before contacting Tech Support: https://support.skype.com/support_selection
Of course we will be happy to try to help with Apple questions here in Discussions.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Built-In iSight not responding

Hey. My iSight camera is not working on my macbook for whatever reason. I have checked the system profiler, user accounts, other programs, and reset the smc. Any suggestions?

Welcome to Discussions, Searcy91
Try EVERY relevant suggestions from http://support.apple.com/kb/HT2090
If your iSight problem occurs in more than one app and more than one user account, the PMU / SMC reset suggested there (instructions in http://support.apple.com/kb/HT1411 ) often restores proper function of inbuilt iSight.
However, if your built-in iSight does not show as a USB device in the System Profiler after carefully following all the suggestions in the "How to Troubleshoot iSight" article, yours is most likely a hardware problem that will require help from an Apple Service Technician.
As stated in Apple's "How to Troubleshoot iSight" article:
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.8) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Built-In iSight not connected

On iMovie, Photobooth and iChat my in-built iSight seems to not be connected.
I have tried resetting the PRAM and had no luck.
The green light is not on and I cannot locate it on the system profiler.
*What has happened to my camera?!*

TK-60 wrote:
On iMovie, Photobooth and iChat my in-built iSight seems to not be connected.
I have tried resetting the PRAM and had no luck.
The green light is not on and I cannot locate it on the system profiler.
*What has happened to my camera?!*
Welcome to Discussions, TK-60
If you are still having problems after trying Baby Boomer's good suggestion, try restarting the Mac. If the problems persist, try all relevant suggestions from:
http://support.apple.com/kb/HT2090
If your iSight problem still occurs in more than one app and more than one user account, the reset suggested there often restores proper function of inbuilt iSight.
However, if your built-in iSight still does not work after carefully following all the suggestions in the "How to Troubleshoot iSight" article, and if iSight does not show as a USB hardware device in your Mac's System Profiler utility, yours is most likely a hardware problem. In that case, contact Apple or an Apple-Authorized Service Provider for service.
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.4); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

Built in iSight not working after Lion install

First I thought it was iglasses which I removed. I then unplugged my secondary Logitech cam; but still I can't get any image from the Built in iSight Camera after my Lion install.
It shows up as a USB peripheral in the mac System Profiler. What gives?
Thanks

Hi, i read this very useful post to undestand why my iSight camera won't work under Quicktime video recorder, on Mac OS X Lion 10.7.2. I was sure it worked in the past, and for example Photo Boot works, Skype works but not Quicktime. I tried the reset pause, and anything happens. Solution for me was the idea of disconnect some USB peripherical. It was my external audio card for me, a Focusrite Scarlett 8i6 audiocard. It starts to work immediately. If i reconnect the audio card after the working window in Quicktime, it seem to continue to work in a perfect way, but if i close and reopen Quicktime iSight still blocked. Very strange, anyway i just can make it start when i need. I hope this will be useful to others.

Built in Isight not detected in USB

Similar Messages

Maybe you are looking for