Built-In iSight problem after migration on parallels

I'm having a very strange problem. Recently I upgraded my MacBook Pro and migrated everything across from my old machine. Mostly without issue.
Something is driving me crazy though. Now in Parallels when I try to connect my iSight XP tells me that it has discovered new hardware. So I go through the whole install new hardware rigmarole. It then tells me that 'It Cannot Install This Hardware' saying that wizard cannot find the necessary software. I do have the bootcamp drivers installed though.
Also I'm noticing that when I'm trying to connect USB devices in parallels instead of it saying Apple Built-In iSight it's now saying Apple Built-In iSight #2.
I've tried everything. Searched through these discussions, parallels forums and even tried editing the .inf file to get the driver to work.
Does anyone have any ideas?
Thanks in advance!

RichardBradbury wrote:
I'm having a very strange problem. Recently I upgraded my MacBook Pro and migrated everything across from my old machine. Mostly without issue.
Something is driving me crazy though. Now in Parallels when I try to connect my iSight XP tells me that it has discovered new hardware. So I go through the whole install new hardware rigmarole. It then tells me that 'It Cannot Install This Hardware' saying that wizard cannot find the necessary software. I do have the bootcamp drivers installed though.
Also I'm noticing that when I'm trying to connect USB devices in parallels instead of it saying Apple Built-In iSight it's now saying Apple Built-In iSight #2.
I've tried everything. Searched through these discussions, parallels forums and even tried editing the .inf file to get the driver to work.
Does anyone have any ideas?
Thanks in advance!
Welcome to Discussions, RichardBradbury
I do not use Windoze, Boot Camp, or Parallels, so I have ever worked the specific trouble you post. However, I do have ideas that you can consider.
If you get no better here, try all relevant suggestions from the iSight Troubleshooting article:
  http://support.apple.com/kb/HT2090
If your only problem in any user account is with Parallels, there is nothing wrong with your Apple hardware or software. In that case, I suggest you seek suggestions from Parallel's wide variety of customer Support options:
  http://www.parallels.com/support/
If you cannot find what you need from their FAQs, knowledge-base, dedicated Parallels Forum, or other Free Support Resource, you can request specialized help from Parallels Technical Support personnel via the contact choices available in the Support web pages.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display  G4 PowerBook  1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

Similar Messages

  • Macbook 10.5.8 Version Built in ISight problem with YM 3.0 beta version

    I am using my Macbook built in ISight with the latest version of Yahoo Messenger for Mac, the 3.0 Beta. Every time i will use the YM webcam, it will only last for about 1 minute and will not work anymore. This is happening since i bought my macbook last November 2008. it will be a year next month and still the ISight is not working properly with YM. When i checked from the store where I bought my macbook, they said it happens in YM coz according to them YM is not yet fully applicable with apple laptop models and recommended to use other messenger instead. My family and friends are using YM only to keep in touch with me so I don't have a choice but continue using YM. Its really disappointing coz I even downloaded the other version of YM before this 3.0 version, but same problem still exists.
    Can anyone help me on how can i fix this problem? or if there is really a solution on this..I've always wanted to have a macbook laptop but having this kind of problem really made me think if i did a right decision to buy this laptop. it is indeed an expensive laptop but i cant enjoy it fully...
    please help me!!!

    Welcome to Discussions, Marianne Bayogos
    Problems like yours, especially those involving known-unreliable (Beta) software, can be difficult to resolve. You need to start by troubleshooting to determine the source of the problem. Then you will KNOW what to fix. You seem like a fairly experienced user, so try any of the following you think might help in any order you like.
    (0) You can use the suggestions in http://support.apple.com/kb/HT2090 to determine whether iSight is causing your problem. Be sure to try with more than one user account and with some other apps, too.
    If your iSight works properly with all other apps in every user account you test, your Apple hardware and software is NOT the cause.
    If you can eliminate iSight as the source of your trouble, you will need to either switch to other ways of communicating or troubleshoot other system elements that might be causing the problem. Here are some other things you can consider if you don't get better suggestions here.
    (1) Sometimes a restart restores function on internet connected applications. Shut down everything and restart your entire system including modem, router, and Mac in that order. To eliminate possible communication hardware problems, allow self-test to complete on each device before starting the next.
    (2) If you updated or installed any other software immediately before the problem began, check their websites to see if there are known issues with your system configuration or installation. If these are no know issues, carefully following the developers' instructions, reinstall any recent software additions that you think might be causing a conflict with YMM, use Disk Utility to repair permissions, and try again. Doing this reinstall will reduce the possibility that some recent addition might be conflicting with your new YMM Beta.
    If you find conflicting software, follow the instructions and uninstall to see if removing it will restore proper function to your favored communications apps.
    (3) Check YMM's Help: http://help.yahoo.com/l/us/yahoo/messenger/mac/mac3/index.html
    for help with installation and communication requirements/ configuration topics.
    If you do not find the answers there, check the dedicated YMM forum (use the "Ask Other Messenger Users" link on the help page) to see if your problem has already been solved by other users who post there.
    (4) You can also take your MacBook to a different location and see if the connection works when you access the web via a different internet connection.
    (5) I no longer use YM because I often encountered problems like those you describe, but my testing from several years back showed that Yahoo! seemed to support the Windows version of their messenger app better than the Mac version.
    Because your iNtel Mac can use Boot Camp, VMware Fusion™, Parallels™, or VirtualBox to run Windows® software, there is another alternative available to you. Choose which method you want to use to run Windows®, add the required software to your iNtel Mac (if you have not already done so), and then install and use Yahoo! Messenger for Windows.
      http://messenger.yahoo.com/platform/win
    (6) If all else fails, and if your family and friends are willing to try something "new and improved" (does NOT work with Yahoo! Messenger), you can both install and try a different video chat app such as Google Talk or Skype.
    (7) Alternatively, you can try the web-based video chat sites like http://www.mebeam.com/ or Defcom's recommended TokBok.
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.1)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.1)
    G5DP1.8GHz (10.5.8) G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) LED Cinema Display External iSight

  • Macbook built in iSight problem.

    I am having problems with my built in iSight.
    I've tried to track all the way to see where is failing and I get the following on the Console Log.
    Jun 15 22:53:11 frviana kernel[0]: USBF: 631.251 Built-in iSight[0x2be9b00]: error getting config. err=0xe00002ed
    Jun 15 22:53:12 frviana kernel[0]: USBF: 631.760 [0x2b24f00] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of hub @ location: 0x3d000000)
    Jun 15 22:53:16 frviana kernel[0]: USBF: 635.601 [0x2b24f00] The IOUSBFamily was not able to enumerate a device.
    It initially appers on the system information as an USB device but after I try to use it for the first time on any application, example: Photobooth I get this error and it disapeer from the system information.
    I am running the following processes:
    Active Memory: 110.25 MB
    Free Memory: 836.90 MB
    Wired Memory: 150.77 MB
    Used Memory: 424.10 MB
    Inactive Memory: 163.09 MB
    Total VM: 7.10 GB
    Number of processes: 53
    ID Process Name User CPU RSIZE VSIZE
    0 kernel_task root 2.30 50.96 MB 1,017.06 MB
    1 launchd root 0.00 516.00 KB 27.66 MB
    23 dynamic_pager root 0.00 168.00 KB 26.61 MB
    27 kextd root 0.00 980.00 KB 27.53 MB
    31 KernelEventAgent root 0.00 628.00 KB 27.18 MB
    32 mDNSResponder root 0.00 1.12 MB 28.38 MB
    33 netinfod root 0.00 564.00 KB 26.91 MB
    34 syslogd root 0.00 420.00 KB 26.63 MB
    36 configd root 0.00 2.20 MB 29.24 MB
    37 coreaudiod root 0.00 1.10 MB 28.64 MB
    38 diskarbitrationd root 0.00 1.04 MB 27.11 MB
    39 memberd root 0.00 652.00 KB 27.64 MB
    40 securityd root 0.00 2.20 MB 28.68 MB
    42 notifyd root 0.00 460.00 KB 27.19 MB
    43 distnoted root 0.00 816.00 KB 27.01 MB
    44 DirectoryService root 0.00 2.46 MB 29.46 MB
    45 blued root 0.00 2.12 MB 37.17 MB
    50 coreservicesd root 0.00 8.96 MB 39.99 MB
    54 update root 0.20 220.00 KB 26.59 MB
    63 WindowServer windowserv 3.60 19.36 MB 339.29 MB
    65 ATSServer frviana 0.00 6.23 MB 146.06 MB
    66 loginwindow frviana 0.00 7.42 MB 351.14 MB /System/Library/CoreServices/loginwindow.app
    76 lookupd root 0.00 1.23 MB 28.50 MB
    87 crashreporterd root 0.00 204.00 KB 26.59 MB
    122 sh root 0.00 616.00 KB 27.06 MB
    123 OSXvnc-server root 0.00 3.04 MB 294.39 MB
    124 dyndnsd root 0.00 7.89 MB 109.98 MB
    128 translated root 0.00 248.00 KB 36.07 MB
    146 nfsiod root 0.00 184.00 KB 28.61 MB
    151 ntpd root 0.00 404.00 KB 27.07 MB
    162 rpc.lockd root 0.00 192.00 KB 26.65 MB
    170 automount root 0.00 1.11 MB 29.00 MB
    175 mds root 0.00 3.88 MB 42.33 MB
    180 automount root 0.00 1.07 MB 28.71 MB
    185 mdimport nobody 0.00 2.38 MB 38.59 MB
    189 httpd root 0.00 1.44 MB 28.15 MB
    190 httpd www 0.00 408.00 KB 27.72 MB
    191 pbs frviana 0.00 2.05 MB 54.16 MB
    197 Dock frviana 0.00 4.32 MB 348.64 MB /System/Library/CoreServices/Dock.app
    198 SystemUIServer frviana 0.00 7.82 MB 347.52 MB /System/Library/CoreServices/SystemUIServer.app
    200 Finder frviana 0.00 15.09 MB 362.47 MB /System/Library/CoreServices/Finder.app
    202 mdimport frviana 0.00 3.50 MB 60.37 MB
    204 Microsoft AU Daemon frviana 0.00 8.72 MB 400.53 MB
    205 iTunes Helper frviana 0.00 1.72 MB 326.04 MB
    206 iCalAlarmScheduler frviana 0.00 3.61 MB 330.61 MB
    214 System Profiler frviana 0.00 8.11 MB 346.67 MB /Applications/Utilities/System Profiler.app
    216 Console frviana 0.20 7.97 MB 347.09 MB /Applications/Utilities/Console.app
    222 System Events frviana 0.00 3.29 MB 293.91 MB /System/Library/CoreServices/System Events.app
    225 TextEdit frviana 0.00 7.61 MB 347.31 MB /Applications/TextEdit.app
    226 AppleSpell frviana 0.00 1.90 MB 37.75 MB
    230 cupsd root 0.00 1.63 MB 27.85 MB
    232 Activity Monitor frviana 10.70 12.18 MB 435.16 MB /Applications/Utilities/Activity Monitor.app
    233 pmTool root 0.80 1.17 MB 36.45 MB
    Any idea? It has been 3 days only that I bought the Macbook.
    Thanks,

    My macbook had the same problem. It began after I installed bootcamp, which I have since updated to 1.1. Whenever I boot into windows xp and then back into Os X, the isight stops working. In photobooth I get a blank green screen with a few scribbling lines of static at the top, but in ichat I get the "in use by other application" error.
    I tried a system X reinstall, a bootcamp reinstall, zapping the PRAM, etc. etc. What really killed me was that the isight camera continued to work FINE in windows, but not at all in Os X (I could almost hear Bill Gates snickering).
    The solution turned out to be resetting the power management unit by unplugging, removing the battery and holding down the power button for 5 seconds. Works without having to zap PRAM after.
    The annoying thing is that I have to do this EVERY TIME after I have booted into windows if I want the camera to work in Os X.
    As other users have pointed out, bootcamp now includes a package that updates the isight firmware.
    Interestingly, this does NOT happen on my intel iMac, only the macbook.
    I'm hoping for a more elegant fix.
    Anyone else?
    Jason

  • Built-in iSight problems-"camera in use by another application" but its NOT

    I am having an issue with my iMac G5 2.1GHz with iSight built in.
    I tried to iChat AV tonight after months of not using it. When I opened my own video window it says "Your camera is in use by another application."
    There are no other applications open in the dock other than Finder.
    Same results with Photobooth. The message reads -- Photo Booth cannot open because the camera is in use by another applicaton. Close the application using the camera, then try opening Photo Booth again. < OK >
    I searched this forum and tried the following:
    • zap PRAM
    • reset SMU
    • reset NVRAM
    I looked for iSight prefs, but couldn't find anything. Deleting prefs is the only thing I have not tried, but I do not know what to delete.
    Also, the camera shows up under USB under system profiler. The IR remote also shows up on the same bus, and the remote works just fine.
    The green light next to the iSight is never on.
    I switched to another user and experience the same problems, so it does not seem to be user settings.
    Any help to get my computer to recognize my iSight would be appreciated!

    Thanks for the note. I saw that Apple KB article #93216 that basically tells you not to have any other applications running that use the camera, which I do not. Also, I have Classic installed, but it is not running as I hardly ever use it.
    Since my original post last night I have tried several more things, with absolutely zero success.
    One unique thing that I thought would work (and it sort of did) was to add Photobooth to my Startup Items under the Accounts tab of System Preferences. Unlike iChat AV, Photobooth will not even open if the built-in iSight is not available. So, I thought, let's see if Photobooth will open at Startup and perhaps take over the camera before whatever is taking it over has a chance to do that.
    Sure enough, this trick worked, although the video screen was blank. On a second time the video screen showed erratic thick lines like it was starting to pass the video data through and then was stopped. Again, my iSight is recognized by Apple System Profiler, so the computer knows it is there and is getting power, etc. As soon as I quit Photobooth and tried to reopen it, I received the message again that the camera was in use by another application.
    My next steps, when I am able, are to try to boot off an external firewire hard drive that should have an older saved backup of my system, from when the camera was working. I will also download the combo updater as you suggest, MGW, and apply that as I understand that to be a sort of remedy for any number of problems.
    To me it appears to be a software issue. I would imagine with the OS and not related to any application in particular. (iPhoto cannot access the iSight, can it? For some reason my iPhoto opens automatically on my G5 iMac every time I boot it up, and I cannot figure out why. I will look into this issue and see if it is related.)

  • Major built in iSight problem!

    So I opened photobooth today and the image was terribly wrong. The image was in shades of purples, greens and grays, and was very grainy. It wasn't a slight change of what the normal picture looks like, but so bad that it looks like it could be an effect (and it is not.)
    Nothing like this has ever happened before. I have no idea what it could be.
    I am using a macbook pro, MAC OS X version 10.4.11.
    2.2 GHz Intel Core 2 Duo and 4GB or ram.
    any help will be appreciated

    Sorry you are still having problems, annefeldman10
    So I tried all the different options ...
    So you mean that you tried the all except the last one?
    "... contact Apple or an Apple-Authorized Service Provider for service."
    If you used the last suggestion, too, and have had your Mac checked by an AASP, what did he tell you to do?
    My camera is recognized ...
    Do you mean that your built-in iSight is recognized as a USB device in your MacBook Pro's (MBP's) System Profiler?
    If your built-in iSight does not show up as a USB device in your MBP's System Profiler after you have tried all relevant suggestion (except the AASP one) from http://support.apple.com/kb/HT2090 , you have a hardware problem that will require the services of an AASP.
    ... only showing a green screen.
    Verify that the "Colors:" choices bar setting in your  > System Preferences > Displays window shows Millions. If it is shows something else, correct it.
    I am not sure what the reset is ...
    The "Reset SMC" suggestion in the first ¶4 of http://support.apple.com/kb/HT2090
    With your MBP, you must follow these instructions:
      http://support.apple.com/kb/HT1411
    ... (it only had instructions for powerbooks) ...
    If "it" means something in " http://support.apple.com/kb/HT2090 ", your statement cannot be true. No PowerBook has a built-in iSight.
    If you mean that you only have instructions for a PowerBook, you can download the users Guide appropriate for your MacBook Pro at:
      http://support.apple.com/manuals/#macbookpro
    ... I did the restart and it didn't help at all.
    Restarting your MBP is a good idea that often gets things working again. It was wise of you to try that first.
    I also suggest that you disconnect all peripherals while you troubleshoot your iSight and keep all applications closed except the one you are testing. Close the first app you test with your iSight before you launch the second one to be tested.
    If you meant "reset" instead of "restart," and if you use reset procedures for a "powerbook" instead of a MBP, it is not surprising that those PowerBook procedures do not correct a MBP problem.
    If you need to post back for more help, please be as specific as you can. We will try to offer detailed suggestions to your specific questions.
    EZ Jim
    G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11)   iBookSE 366MHz (10.3.9)  External iSight

  • Serious problem after migration assistant - any ideas?

    Hi folks-
    I bought an iMac this weekend and for various reasons did not configure with data from my MacBook Pro when I first turned it on, but waited until two nights ago to use Migration Assistant to transfer all but users.
    I updates both machines fully with Software Update first. MigAsst went fine until I hit the begin option and after a few minutes the iMac told me there was a problem with my MacBook Pro (MBP). I quit MigAsst on the iMac but even after an hour I couldn't escape it or quit the MBP, so shut down using the power button.
    When I restarted, I had a black screen with lighted keyboard and startup chime. I hard-restarted, same thing happened. Third time, I got the grey apple window with no apple for about ten minutes, then a light blue screen with the spinning spokes (not the rainbow) and a slightly darker window with no spokes. The two blue windows alternated back and forth for maybe 8-10 seconds each endlessly until I restarted.
    Since I live about 4 hours from the nearest Apple store and tech support was already closed for the evening, I restarted from the Snow Leopard disk and repaired permissions (there were many repairs) and repaired the disk (was told it was fine). I restarted and got the grey-blue-blue cycle again.
    I reinstalled the OS from the Snow Leopard disk and everything worked fine - I ran as many tests as I know how to, even perturbed the casing slightly wondering if it was a loose video card wire or something. Nothing. It all worked fine for several hours until after the second Software Update (which as I recall was only Java and iTunes), and now all I get is the black screen again. Also, now the green light on the power cable is not glowing even though the battery reads as fully charged and the keyboard and startup chime are all hunky dory.
    I'd think it was a video card issue, but there are too many incongruous symptoms. If I could at least start up from the OS disk again I could get my data off... Any ideas, diagnoses or suggestions would be much appreciated.
    With gratitude and blessings.

    The problem is described in a different post as well, and it is considered to be answered. However, the answers are not very satisfactory because they are complicated.
    The underlying problem is that MacOS is looking for a FileVault user, while after migration the user files are actually not within a FileVault bundle.
    I believe that there must be a setting to change the login properties for the user to not look for a FileVault user, but for a plain, non-encrypted user. So please, somebody from Apple answer this questions!
    Command line very welcome, because I only have a command line user right now. And oh, my MBA didn't ship with a boot DVD so I don't even have the chance to reinstall my system easily. Also, getting my data out of the FileVault on my current machine, transfering everything again (almost 250 GB) and then putting them back into FileVault seems a bit too much effort for what appears to be a simple bit set somewhere…

  • 2 Problems after migration Project Server 2007 to 2010

    Hi Everyone!!
    I have 2 issues after migrate MS Project Server 2007 to Project Server 2010, in fact i had a lot issues, but i can solve almost all, so after solve all issues, just is pendings 2 issues very rare:
    Backgrounds:
    Migrated from: Windows Server 2008R2 - SQL Server 2008 R2 - Proejct Server 2007 with WSS 3.0 - All updates are up to date (CU is up to date) and all platform is ok
    To: Windows Server 2008R2 - SQL Server 2008 R2 - Project Server 2010 SP2 - SharePoint Server 2010 SP2 - All updates are up to date (CU is up to date) and all platform is ok
    3 Servers in the Farm, ---->  1WFE-1WAPP-1DB
    Issues:
    In the Project Center, some migrate Project don't show the icon with image about project documents, risk and issues although that project effectively have documents , risk and issues
    In "Server Settings" , in section "Operational Policies"  in "Project Sites" almost all projects don't show the URL with Project Site
    For the issues 1 and 2, i tried some things:
    Re publish all projects (approx 700 projects) with a script via PowerShell available in technet
    Run the Wizard Again
    Rebuild Solution
    Restart the all Servers in the Farm
    Restart Services ----> IIS - Project EventService - ProjectQueue - SharePoint Timer
    and  i can't solve it yet!!!
    Please Any Ideas?
    Erick Gutiérrez PMI Membership #ID 2089740 MTCS - Microsoft Project Server Managing Projects

    Have you restored content DB successfully?
    for point 2 have you performed:
    have you synchronized project site under server setting -->  operational policies --> Bulk Update Project
    Sites 
    http://pwmather.wordpress.com/2012/10/08/projectserver-2010-bulk-update-project-site-issue-ps2010-msproject-sp2010-sharepoint/
    after doing this publish all the project which are having issue it may solve your 1st issue.
    You can check if below condition is applies to you (PWA 2007)
    You may need to use the WSS site re-linker tool –
    now built in to Server Settings in PWA as “Bulk Update Project Sites”.  If you have changed URL die to a different port then re-linking should get your sites in order. In upgrade scenarios the “Previous Site Path” Web application might show as a GUID
    in the drop down – however it still works and will re-link the sites.
    http://technet.microsoft.com/en-us/library/cc197498(v=office.12).aspx
    kirtesh

  • Problems after  migrating application from 10.1.2 to 10.1.3

    Hi,
    I am encountering the following error while executing the application after migrating it from Jdeveloper10.1.2 to JDeveloper10.1.3. Could you please help me in this regard..
    NOTIFICATION J2EE JSP0008 Unable to dispatch JSP Page : java.lang.NullPointerException
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:60)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:416)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:478)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:401)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:629)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
         at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
         at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
         at java.lang.Thread.run(Thread.java:595)
    Message was edited by:
    user491067

    Do you have the problem with all JSP pages, or only a few of them ?
    Does it happen in the Embedded OC4J only ?
    Could you try to deploy your application in the Standalone OC4J and test it from there ?
    I had a similar issue where the Embedded OC4J was unnable to run big JSP pages.
    There was no problem with the Standalone OC4J.
    Hope this helps,
    Didier.

  • BC4J problems after migrating JDeveloper 9.0.3 - 9.0.4

    Hi!
    We have application based on BC4J+struts framework. After migrating JDeveloper from 9.0.3 to 9.0.4 we are getting following errors:
    JBO-27021: AttributeLoadException
    JBO-27022: AttributeLoadException - it seems to be a problem between datatype mapping but on 9.0.3 application worked fine
    next we get folowing error when we are inserting a row into the ViewObject. This error does not appear by first inserting but by some of the subsequent calls of insertRow.
    java.lang.ArrayIndexOutOfBoundsException
         at oracle.jbo.server.QueryCollection.add(QueryCollection.java:1051)
         at oracle.jbo.server.ViewRowSetImpl.insertRowAtInternal(ViewRowSetImpl.java:1288)
         at oracle.jbo.server.ViewRowSetImpl.insertViewRowAt(ViewRowSetImpl.java:1255)
         at oracle.jbo.server.ViewRowSetIteratorImpl.insertRow(ViewRowSetIteratorImpl.java:1963)
         at oracle.jbo.server.ViewRowSetImpl.insertRow(ViewRowSetImpl.java:1933)
         at oracle.jbo.server.ViewObjectImpl.insertRow(ViewObjectImpl.java:5425)
         at cz.cca.akademie.action.ra9500.AssignActionPriradRole.execute(AssignActionPriradRole.java:23)
         at cz.cca.akademie.action.AssignAction.execute(AssignAction.java:55)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:778)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:536)
    Unfortunately I'm not able to say when exactly these errors happen, they appear accidentally. It seems to be a problem with inner state of the ViewObject.
    We would be glad for any suggestion
    Thanks

    CONTINUES...
    What is the problem? Something with the ClassLoader of Tomcat 4.1?
    I will try with Tomcat 4.0 and post this thread to tomcat-users mailing list!
    bye,
    Marco.

  • Major permissions problems after migrating to new iMac

    Hi, I am very new to this and need some help. Have been using a MacBook pro for the past year to synch iPods/iPads that are used within our school. Purchased an iMac and proceeded to migrate users/files etc. After migrating I have had major problems with iTunes.  My iTunes library is visible but I cannot synch any devices, have tried verifying permissions and fix permissions but to no avail. Any help would be very much appreciated.

    Did you instal the program again, or try to migrate it from the old system (not a good idea)? I would run the installer again and it should correct the problem -- the Proximity dictionary for English (and probably others) is apparently not installed correctly.

  • MacBookPro Built in Isight problems

    I have problems with my built in isight all the time. I get the message that another program is using it if i open photobooth. If i open Ichat i get the telephone icon instead of a webcam icon, which prevents me from using the webcam, and if i use yahoo messenger the webcam icon is inactive(it turns a different shade and is not actually "clickable". sometimes if i turn of the computer, pull the battery out and hold the power button for 5 seconds and then replace the battery and turn the computer on it will start to work agian, other times the problem remains. i have now not been able to use my webcam for about 4 days. i can assure you that i only try and use one program with the webcam at a time, and i have Mac OS vers 10.4.11 and the update thing says my software is u to date. any help?

    Try resetting your SMC.
    Resetting the System Management Controller >>
    Also, read this: http://docs.info.apple.com/article.html?artnum=93216
    -Bmer
    Mac Owners Support Group - Join us @ MacOSG.com
      Mac611 Mobile Mac Support - about.Mac611.com
       iTunes:MacOSG Podcast | YouTube.MacOSG.com
                       An Apple User Group 
    Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

  • Problems after migration from CS5 to 5.5 with Blackmagic Card

    Hello forum,
    we have an problem after an optimal migration from cs 5 to 5.5 projects.
    different: there is an bm hd extreme 3d card in the system.
    We are aware of the issue that there has to switch to BM player an the Timleinl settings to BM
    But there is still a problem: we are not able to view the ingested material in the source viewer,
    because there is another overlay - form the background or sometheing else - see attached photo.
    We add new drivers for graphics/BM and patches for CS 5.5
    None of these problems by creating new projects.
    Also the applications also  hangs after we try to close,
    many thanks for your answers - Sven.

    No reason to ask the same question twice. Just be aware that there are German forums as well.
    Your problem is probably in the BM drivers.

  • Ofgtel65.pll , CGDV$REF_CODES.SOFT_VAL problem after migrating to 10g

    Hi,
    We have migrated from Oracle 9i to 10g and
    In 'OAS904' , i have used CGDV$REF_CODES.SOFT_VAL to populate a field with a meaning via a dynamic list in one of the FORM and if I query the form by giving a value and press F12,all fields are populating , its working fine but the same thing is not working after migrating the FORMS application to 'OAS10.1.2'. If I query the form by giving a value and press F12,its showing error like "FRM:40201 Field must be entered" for that particular field because that field is not populated and also a required field in the form.
    Actually , this form is generated by designer.If i open the form using forms builder, i can see the auto generated code like 'POST-QUERY', in that CGDV$REF_CODES.SOFT_VAL is used to retrieve the meaning.
    Note : ofgtel65.pll points to QMS_REF_CODES instead of CG_REF_CODES.
    Am using headstart6.5.4.0 .
    The generated form having post_query with the following code
    CGDV$REF_CODES.SOFT_VAL(P_VALUE=>curr_value, P_MEANING=>l_meaning, P_DOMAIN=>l_domain, P_VAL_CODE=>TRUE);
    But in the ofgtel65.pll ,
    the soft_val method will have a query that refers to QMS_REF_CODES .But my meanings are present in CG_REF_CODES.
    Any help would be of great help. Thanks in advance.
    Regards,
    Tharini.
    Edited by: tharini on Aug 4, 2010 10:30 PM

    Is this a Designer generated Form ? You may want to ask the question on that Forum too.

  • Strange Calendar sync problem after migrating to iOS5

    Hello all,
    I posted my problem as an "me too" reply to somebody else's thread but think it got a bit lost there.
    Since I can't solve this problem I decided to make a new thread.
    The problem:
    After upgrading my iPhone4 to iOS5 I have a strange calendar syncing issue such that existing entries from one calendar (I've got two, see below) are duplicated on the other .... but only on the iPhone, not on the calendar server (Lotus Notes) itself!
    As I couldn't find a normal solution to this problem (already removed the complete Lotus Notes traveler account from my iPhone and reinstalled it again, to no use: the duplicates pop up again) I finally decided to start removing the duplicate entries on my phone. To my surprise however they popup again!!!!!
    I added a new entry to the original calender to see whether that one would popup in the other as well but this didn't happen.
    It looks to me it must be something wrong on my iPhone as the "duplicates" do not show up in the calender database on the server (using Lotus Notes PC client) nor its replicas.
    The configuration:
    I sync with two calendars on my iPhone:
    - gmail calendar for my private
    - lotus notes server (traveler exchange) for my work.
    The gmail calender also syncs with my desktop client (outlook 2010) via a small application "gSyncit".
    This all worked like a charm on iOS4.
    No matter where I modified, deleted or added entries (not only calendar, also contacts and mail) it all stayed perfectly in sync!
    Does anybody out here noticed the same and/or has a solution to this?
    BTW: I haven't activated iCloud for the calendar/mail/contacts (yet) ...

    OK,
    I found out what was wrong myself.
    In the end it turned out that it had nothing to do with the iOS5 upgrade itself.
    In case somebody else stumbles accross this very same problem, here's what was going on:
    - Within the latest lotus notes client (on PC) the user has the possibility to display (read-only) external calendar contents (e.g. google's calendar).
    - When setting this up you need to supply your external calendar's login/password information and next to that
    - also have the possibility to select "View this calendar when offline or on a mobile device"
    It was this setting (which I probably accidentally enabled) causing the "issue". Deselecting this option made my duplicate entries disappear on my phone.

  • Problem after migrate 6506 to N7K

    we just replace 6500 with N7K, after migration there&#39;re some device (server,pc,printer) change its ip address configuration (subnet and gateway) by it self. can N7K did it?
    Posted by WebUser Hafif Hery Husen from Cisco Support Community App

    hi Darren im the "Web User" above           
    yes i believed the L3 config on N7K was correct but i need to make sure it .. that's why i posted this question
    version 6.0(1)
    interface Vlan83
      description ** Link to Server Room 3 **
      no shutdown
      ip flow monitor Netflow-Monitor-AABHO-CS input 
      ip flow monitor Netflow-Monitor-AABHO-CS output 
      no ip redirects
      ip address 172.16.83.248/24
      ip router eigrp 8888
      ip arp 172.16.83.25 03BF.AC10.5319 
    version 6.0(1)
    interface Vlan88
      ip flow monitor Netflow-Monitor-AABHO-CS input 
      ip flow monitor Netflow-Monitor-AABHO-CS output 
      ip address 172.16.88.201/24
      ip router eigrp 8888
      ip dhcp relay address 172.16.83.30
      description ** Link to 8fl **
      no shutdown
    version 6.0(1)
    interface Vlan81
      ip flow monitor Netflow-Monitor-AABHO-CS input 
      ip flow monitor Netflow-Monitor-AABHO-CS output 
      ip address 172.16.81.201/24
      ip router eigrp 8888
      ip dhcp relay address 172.16.83.30
      description ** Link to 1fl **
      no shutdown
    any other config that i should post ?

Maybe you are looking for

  • Set Incoterm and Terms of Payment in Bid Invitation

    Hi gurus,     We are using SRM 5.0 on ECS with backend ECC 5.0.     The requirement is that the user want to set incoterm and terms of payment when they create bid invitation.So the bidder can just follow what the purchaser has set in order not to ch

  • I've created a character report without user

    I've created a character report without user parameters that works just fine. The moment I've created a user parameter, without even putting it in a query, instead of a report I've got the message: "REP-1219: 'repeating_frame_name' has no size - leng

  • "date format not recognised" in DBMS_SESSION, on page over db_link

    Hi, I have an Apex 4.0 page which has a region that gets data constituted from a connection across a database link. The host database is 11.1.0.6 and the remote database is 9.0.1. (Both Standard Edition) I am using EPG. Intermittently, I receive the

  • Output type of smartforms

    How see output type of smartform ?

  • GetParameter() on an uploaded file

    I am using a MultipartRequest object to get the file a user uploads (type="file"), and save it to a directory that I specified in the MultipartRequest constructor. However, I also want to get the parameter value of where the user uploaded the file fr