Built-in Memory error code

Mine is a G3 600Mhz, with its original 128 Mb memory. Lately it ran to a kernel panic and hang up. I used the Hardware Check CD, and it showed that the buit-in memory is errored.
I don't have guaranty on my Ibook. So if I want to get it fix, how much it will cost me?
If it is too much, then probably I should let it goes and get a PC laptop (so cheap now).
Thank you for your reply.

You're welcome.
Was it just one kernel panic? You may be able to limp along with it for awhile if it isn't panicking repeatedly. But it will probably not work very well for very long.
When I need a new Mac, I shop at some of the catalog/online places. Lots of times they will double the original memory for just a $30 or $40 installation fee and offer freebies (cases, printers, etc.) to get you to buy from them. Check out Club Mac, MacMall, MacConnection, and Mac Warehouse. SmallDog.com has some good deals, too, and they will let you customize them if you want a bigger hard drive than is standard. Another place to check is the Apple Special Deals page. You can often find some good prices on refurbished models there.
Again, good luck.

Similar Messages

Final Cut Pro 6 - 'Out of Memory/Error Code'

Hey All,
I'm in the final stages of editing a documentary and I keep running into an 'Out of Memory' error code in Final Cut Pro 6.0 when trying to export a reference file. The finished film is 81 minutes long and contains 19 sequences. I have all 19 sequences nested in a main sequence of a seperate FCP project file, so I'm not wasting any memory on clips or additional backups of sequences. This Nested sequence is the only sequence that exists in this 'other' project file. All of the photos used are under 4k resolution and are RGB. Even the lower thirds are animation QT's with alphas. Any thoughs would be greatly appreciated.
Nick
System Specs:
Quad-Core 2GHZ MacBook Pro
4GB DDR3 Memory
MAC 10.7.2 (Lion)
FCP v6.0.6

First troubleshooting step
https://discussions.apple.com/docs/DOC-2491
If that doesn't solve the problem, you may have a corrupt sequence
Try creating a new sequence with the same settings and copy the contents from the problematic sequence
If that doesn't work. Mark an in and an out for the first half of the sequence and do an export. If that works, mark an in and an out for the second half and export. Keep narrowing down the sections til you find the problematic clip.

Memory Error Code mem_/2/3

G3 (slot loading) blueberry computer is freezing at startup. Just ran supplied cd "Apple Hardware Test" with a fail memory results - error code mem_/2/3
How do I fix this problem?

L., Welcome to the discussion area!
Either the RAM is bad or video RAM is bad. Hopefully replacing the RAM will fix the problem.

Memory error code 4MEM/62/

I am using macbook pro 15" early 2011, 16GB RAM, 500 GB harddisk. The problem is the screen turns blue with gray line or distorted, and the system freezes. It happens frequently in both mac os x mountain lion platform or windows 7 bootcamp, using parallel desktop. I have reformated the hard disk and reinstalled the ML and windows 7 through boot camp, but the problem persists. Hardware test conducted, results error code 4MEM/62/40000000: 0x8448b098

One of the RAM modules you added is bad, or not seated correclty.
Return the factory RAM an run another test to rule out the RAM slot itself, then exchange the RAM for a new set.
Do not touch the metal on the RAM modules with your fingers and touch the case to discharge static before handling RAM.
Install/upgrade RAM or storage drive in Mac's

Built in memory error

Powered up ibook, started normally. Unplugged power cord during startup, computer froze. Utilized force quit/restart commands. ibook restarted. Various problems since- Safari quit unexpectedly,won't start up, gray screen,etc.
Ran Hardware test - memory error: 2MEM/104/4: DIMMO/BUILTIN.
Can someone give me a suggestion as to what problem is/solution?
Thanks

Before I got your email, I went thru my computer & email and dumped everything I did not absolutely have to have. Rebooted and reset pmu several times and finally got ibook & web browser to work. Maybe I created a conflict in the system, don't know for sure. I will remember your suggestion and try if anything else occurs. Thank you.

Not enough memory, Error Code 7

Post Author: NelaK
CA Forum: Crystal Reports
Hi, I am using Crystal report 8.5,
and have problem on one computer (XP) - i cannot view Report but I can print it. If I use the option to send to the printer then it is going to print it, but other way is producing above error. My application is written in VB 6.0. I have application installed on at least 1000 computer but never had problem like that.
Business Object doesn't give support for Crystal Report 8.5 any more so, if someone out there has any idea how I can solve this issue PLEASE let me know
NelaK

You can import your pictures into your computer, confirm they are there, and then delete them from the iPhone.
http://support.apple.com/kb/ht4083
Also, this might help
http://support.apple.com/kb/ht1867

Snow Leopard 'error code 50', 'Low Application memory'. Help.

Hi.
I've been facing **** lot of problems with my MBP of late, and all that I could try have turned unfruitful. I'd appreciate some help.
Problems started when I downloaded and tried to install SL update 10.6.7 on 10.6.6. It was working fine on 10.6.6. The update failed, and I received 'error code 50' very often while deleting files from Trash. Also, 'beach-balling' became more frequent, and I had to force quit applications very often because of 'low application memory' box being displayed.I also encountered the grey screen prompting me to 'press power button till shut down and restart'.
Finally, I tried a clean reinstall but the same problems persisted, and lots of applications stopped working. I could not download files from browser (Low disk space, despite a 100 GB space available on he HD) or save textedit, Office or iWork files. I did a clean reinstall again, with zero-erase option and again downloaded the 10.6.7 combo update. The 'Software Update' application failed. I downloaded the update from my browser and it was installed successfully finally after 4 system restarts, but the 'error code 50' problem still persists.
What am I doing wrong? I've been dealing with this abnormal performance for more than a month. I haven't backed up files because there is no use making a backup of corrupt system. Specs : MBP'09, 13.3". 2.26 GHz, 160 GM, SL 10.6.7.
Please advice.
Regards.

I tried to run the hardware test by inserting the Applications Install dvd and pressing 'D' just after the chime. It did not run. Nevertheless, the App DVD is ejected every time I insert it in to install some apps, like iLife etc. Running Disk Utility dies not work, as it says the 'disk cannot be mounted'.
I tried another clean reinstall of SL 10.6, and some of the funny stuff are :
1. error code 50 yet again
2. It won't allow me take snapshots, saying 'You do not have permission to save snapshots etc.."
3. Safari cannot download files
4. 'Low Application Memory' message box appeared a few times, prompting me to Force Quit Safari.
Could there be something wrong with the Install DVD? Though Disk Utility First Aid shows error free HD verification.

G4 450 and protools, somehow ran out of memory to startup. Error code 10. Tried turning off extensions to boot but now just locks up as I tried a HD verify/repair and then moved the folder to the desktop screen. cant get it off now.froze.

Ok, I have a Mac g4, os9. ..450 Processor. I Think I upgraded ram, can't remember. Maybe a 512 card. Added an 80 gig internal HD for music storage. Computer was solely used for protools LE 5. I knew I was kinda close on my memory for running the program after recording things with plug ins etc. It was beginning to get slow at startup. Anyway it's been a couple years since I used it. I got it set up yesterday and it wouldn't launch and kept giving me error code 10. So I replaced the battery and tried again. the small finder icon in middle of screen would then pop up and alternate with a "?". Then it would change to a pict of a hard drive disk and then a me alternating "?". It would still give me the error code if I clicked on anything. So I then held down the shift key to turn off extensions as it had mentionEd to do a couple times. Still would give me the error code on my home page. If I tried to get into my hd which is on desktop it would give me the message, but somehow it did open one occasion and I went into it and scrolled to disk verify and repair. Did it. Said things were fine. I then saved the results in a file which was then offered along with location. I chose desktop. Probably really bad idea in hind sight.. It did it, but now no matter if I turn extensions off, the home screen pops up but then goes blank. The hard drive icon along with the new folder, and my protools icon immediately dissapear. And it freezes. at one point a message did pop up saying finder could not start up because there is not enough memory available. I'm not a computer guy. Ive tried finding the guy who helped me set this thing up 10 years ago but to no avail. If I can be guided to somehow uncover some of the unneeded memory usage I would then learn how to more efficiently use it. How the heck do I even start. I can't get to a screen which shows what's eating my computers space to even start getting rid of unneeded stuff. Please help if you can. I have so much to loose if I can't get it to work. Btw...I no longer have the os9 disk. I think it was tossed 10 years ago or more. May not even have my original pro tools disks anymore. Uggh.

Ouch, tough spot, but offhand I'd say some memory may have gone bad, or maybe just needs re-seating after all this time.
Not much you can do, but try this anyway...
PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/ht1379
In fact, do 3 in a row, takes a bit of time.

HP Pavilion dv6 Vista Recovery - Physical memory dump w/ error code 0x000000F4 (and others)

Hello Everyone,
This is my first time posting in the forums so I hope that I have chosen the appropriate area and will do my best to be brief but informative.
Computer: HP Pavilion dv6000
Operating System: Windows Vista.
For the past 6-8 months it has been unable to perform Windows Update citing that the most likely reason was a virus. I have tried numerous trouble shooting options when it was recommended that I perform a chkdsk. After initiating a chkdsk in Command Prompt, my computer restarted and had a black screen with no cursor. After watching this for 2 hours and realizing that none of the usual chkdsk progress or text was coming up I made the decision to force shut down.
When I rebooted, I was told to enter system recovery which I did and completed a system recovery from the hard drive. After the system recovery finished and the laptop restarted, I experience a Blue Screen of Death due to a physical memory dump. The error codes are STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA8006671040, 0xFFFFFA8006671278, 0xFFFFF80001D01DA0).
I am not able to boot in safe mode. In the start up repair, I am able to enter command prompt from which I started chkdsk again. Both chkdsk f/ and chkdsk r/ passed with no errors. Additionally, the computer passed both UEFI Hard Drive and Memory tests. I have system recovery CDs for the computer but they fail at 78% completion.
Please let me know if you have any questions or require anymore information. I would appreciate any and all advice!
Thank you!
This question was solved.
View Solution.

Hello @GraydonS,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how there is an error message being displayed on your notebook, being a Blue Screen of Death (BSOD), and I would be happy to assist you in this matter!
Since you are having recovery issues with your system, I recommend following this document on Troubleshooting System Recovery Problems (Windows Vista). This should help you to successfully recover your Operating System.
If the issue persists, please call our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

HT201210 I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

Well I spoke too soon.
The update was successful, but now I cannot connect to the 3GS data network.
Cannot get email and cannot open a page in Safari.
+"Safari could not open the page because the server stopped responding."+
+"Cannot Get Mail+
+THe mail server is not responding. Verify that you have entered the correct account info in Mail settings."+
Email and internet work fine on WiFi.........no data using 3GS network.
Looks like I will have to revert back to old OS.

HP LaserJet M1522 Error Code 49 + "Memory is Low" Message.

i am having a problem with my HP LaserJet M1522 Error Code 49 + "Memory is Low" Message can anyone tell me how to fix this?

update your firmware download it from hp website
tecnical support for hp printing

Error code 1450 - memory mapped file

Hello,
in my application I am using memory mapped files. I have three of it, the maximum size of the biggest one is 5MB. I store 64 Waveforms from a DAQ card in it.
The application runs fine, but sometimes comes an error, when I try to access the MMF. The error code is 1450, "insufficient system resources"
Is a size of 5MB too big? Should I rather create one MMF for each waveform?

Hi mitulatbati,
which development tools are you actually using?
Which platform, libraries and so on...?
Can you post example code?
Marco Brauner NIG

Error Code, not using a memory card

I cannot send any documents from my laptop to the printer. There is an Error Code that says "Please Use Only One Memory Device At a Time" also the network light is flashing blue.
I am not using a memory card at all, just laptop to printer PLEASE HELP!

Hi TE8762,
I would like to help you with the symptoms your printer is experiencing. What model is it? Finding Your HP Product Model Number.
While I wait to hear back from you, please ensure the printer is connected directly to a wall outlet and perform a power reset. To perform a power reset, leave the printer on and unplug the power cable. Leave the printer unplugged for at least 1 full minute then reconnect the power cable.
This alone may resolve the issue, if not let me now which printer it is and we can go from there. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

E71 keeps giving out of memory error; I can't find...

My Nokia E71 (it's black so it may be an E71x, I guess) keeps giving me out of memory errors. I use my phone for nothing but voice calls, text messages, and emails. I have cleared all call logs, deleted all emails except 5 (they have no attachments) and cleared deleted emails, and deleted all text messages. I went into file manager and made sure there are no images, videos, etc. on the phone. I set up options to use memory card for emails. I've turned the phone off, waited 15 or 20 seconds, and turned it back on.
I did all this a couple weeks ago. Ever since then. every couple days I get these out of memory errors, and the phone memory shows me 119 MB used and something like 300K free. I'm at the point where every few emails that come in, I have to delete all emails, erase all text messages, etc. or the phone is just too low on memory to operate.
What else can I try? I don't have any additional applications installed. I've even tried to delete built-in apps such as RealPlayer but it didn't seem like that was possible.
This is getting really annoying. Please help!

@EricHarmon
Although all user data would be deleted, have you tried resetting device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user)?
Happy to have helped forum with a Support Ratio = 42.5

BIOHD-7 error code

after reading some of the forums on this error code i think i will have to buy a new hard drive. i was hoping if i got HP recovery kit i would be able to fix mine. i also got a error code 0xef0003. i tried to use the built in recovey but no luck. now all i have is a black screen that says no bootable disk. so i have is a 2 part question.
1. if i buy a new hard drive will i need the recovery kit that HP offers? i dont have any back up disk.
2. and can i up grade the hard drive? say to a 1TB or maybe 2TB with out doing any other upgrades to the computer?
OS- Windows 7
Model- 300-1120
Product- AY581AA-ABA
Bld ID- A1NAV6PRA3
Thank you for your help...
This question was solved.
View Solution.

Btheone, welcome to the forum.
You are correct that the hard drive failed. The maximum hard drive supported by Win 7 is 2 GB. Yes, you need the Recovery Discs provided by HP.
Here is a guide to help you Recover the system after you replace the hard drive. Read it carefully before buying the new hard drive.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Built-in Memory error code

Similar Messages

Maybe you are looking for