Built in Mic has never worked

 Product Name and Number:  HP Pavilion dv7 Notebook PC
Serial Number {Removed for privacy}
Product Number LM726V
Operating System installed Windows 7
Built in Mic has never worked
Has not work ever

Hi
I had the same experienced before and had mine changed for a new Set.
Hope this is possible on your end and of cos has be still under Warranty - 1 year if no extended Apple Care ...
Cheers

Similar Messages

  • My iPad's(bought from USA)built-in mic has stopped working & I'm in Egypt

    3 months ago I was in the US when I bought an iPad2 and it was working just fantastic then I returned back to my home country Egypt and all was still great then all of a sudden after conducting a firmware update the built-in mic has just stopped functioning normally and has started to record 95% loud static + %sound if I SCREAM into the opening (very low). After searching the forums I could see that this has happened to many others .. but they all simply went to the local apple store and replaced it .. there is no apple store in Egypt as far as I know, only apple resellers. I would like to know who to contact to get this problem handled and my iPad2 either replaced or fixed. Thank you.

    http://www.apple.com/support/ipad/contact/
    I suggest to start there at the link i put and you'll have a few options. Down a little bit after you see the U.S number you'll see a link for other country numbers use the one you need and call them directly for the best help.

  • Headset with Mic has never worked (the mic)

    I have an iphone 3G with the most currently released software updates. I just realized the headphones that came with the phone were also a headset. They have never worked. I see a lot of posts where they "quit" working after an update. I have tried to plug/unplug the mini jack/etc. Nothing seems to work. The clicker does not answer calls/etc. I can hear through the headphones, just no response from the mic.
    Any suggestions? Is this a software thing, or switch that needs to be enabled?

    Hi
    I had the same experienced before and had mine changed for a new Set.
    Hope this is possible on your end and of cos has be still under Warranty - 1 year if no extended Apple Care ...
    Cheers

  • My Apple TV does not work and has never worked.

    My Apple TV does not work and has never worked. I replaced it twice and replaced my router and DSL modem but no luck. I spent hours on tech support with both apple and my ISPs with no luck. Any ideas? Is the Apple TV a donation to apple? I have had the device for 8 months but it will not work for longer than 15 minutes before it drops with network errors. All of my other devices work perfectly on the network including 2 iPads, laptops and an old wii. I love apple products and this is the first real disappointment I have had. The Apple TV seems like a major dud of a product.

    Seems unlikely you have had two faulty replacements, and more likely that there may be some network compatibility issue or problem with reception in the location the AppleTV lies - anything close to it that might be interfering?
    I am assuming you are connected via wifi - if you can try an ethernet connection to rule wifi issues out.
    Could you try it at somone else's house maybe?  If it worked there it would point to something specific at your location.
    You could try replacing it again I guess or seeing if they can offer you credit or a refund.

  • My built in webcam has stopped working on Skype following an update. Does this mean my macbook air has blocked videochat on skype? How can I fix this problem?

    Hi, my built in webcam has stopped working on Skype following an update. Does this mean my macbook air has blocked videochat on skype? How can I fix this problem?

    See this thread:
    https://discussions.apple.com/thread/5306216?tstart=0
    FIX:  
    1. You need Time Machine
    2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
    3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
    4. Go to Time machine in date that skype work fine.
    5. Change AppleCamera.plugin with file from Time Machine
    6. Restart system, Now skype need to work with camera.
    If that doesnt pass,
    Suggest looking here, much success has been found:
    http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

  • Network Extender has never worked

    We received a network extender from Verizon due to the lack of coverage in the area we live - too far from a tower.
    I have tried every weekend to get this thing going and I always get a solid blue power light, solid blue wan light a SLOW BLINKING RED SYSTEM LIGHT and a solid magenta GPS light.
    I tried calling Verizon for support but the tech rep didn't know what to do and was trying to read through the manual, I think and the call dropped after about an hour (back to the lack of coverage issue).  I was so tired of not getting anywhere that I just let it go for the evening.
    Bottom line is - this thing has never worked.  All I can find is that a slow red blinking light is there is an abnormal condition. 
    Is there any further troubleshooting I can do or do I just need to see if Verizon can send me another one?

    Update  -  now I have a solid red GPS light & the slow blinking red SYS light.  Will let it sit for an hour (as the sticker on the side suggests) and see if there's any difference

  • I have a 2009 Mac mini and the wireless card has never worked, would I be able to cover it with my three year extended warranty?

    I have a 2009 Mac mini and the wireless card has never worked, would I be able to cover it with my three year extended warranty?

    matthewfromwhangarei wrote:
    I have a 2009 Mac mini and the wireless card has never worked, would I be able to cover it with my three year extended warranty?
    If you mean AppleCare, then I would believe the answer will be yes.
    First make sure you have a full backup of everything on your Mac, then run, don't walk to your nearest Apple store.
    Note: Due to your Mac now being in computer years, somewhat elderly, Apple may not have the require parts in stock. This will either mean you might have to leave it with them for a number of days, or maybe they will offer you a new Mac mini. While a new Mac mini (if offered) might be a welcome possibility be aware that the new Mac mini no longer has a CD/DVD drive and it comes with Mac OS X Lion and as a result might not run some of your old software.

  • Online number has never worked

    I have just had a reminder that my online number is about to expire, but it has never worked. When I dial it, it connects for a nano-second, and then immediately I get the disconnected beeps.
    I wondered if it was my phone supplie preventing the number being used? (They don't weant me to circumnavigate their service?).
    I won't be renewing the subscription as i cannot use the phone number

    First check your privacy settings are set to ''Allow calls from anyone''.Then change them to "Allow SkypeIn calls from Only people from my Contacts List".Save and wait for 5 minutes.Log out from your Skype account and log back in. Change settings back to "Allow calls from Anyone". Save and wait for 5 minutes.Log out from your Skype account and log back in.
    If the above does not work, please contact customer service: https://support.skype.com/en/faq/FA1170/How-can-I-contact-Skype-Customer-Service
    About Me You can also use a IP Camera as your camera for Skype video Example Instructions

  • Keyboard shortcut for Copies has never worked in print dialog

    I don't know if this is the right place to report a bug, but it has always irritated me that the keyboard shortcut ALT-C to move the focus to the Copies field has never worked in the Adobe Reader print dialog.  It should work as the underscore exists in "Copies:"  I use the shortcut all the time in Office whenever i want to print more than one copy.  It would be nice if this would work in Adobe Reader also.  It should work as the underscore exists in "Copies:"

    To file a bug report go to https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • HT1338 built in camera has stopped working, how can I update or reinstall the drivers

    Built in camera has stopped working, how can I reinstall the respective drivers?

    Here are my best suggestions for your camera problem, Stephen:
    •  If you have not already done so, shut down Mac, restart,
        and try again.  If the camera still does not work, continue.
    • Try ALL relevant suggestions from Apple's Troubleshooting
       article: http://support.apple.com/kb/HT2090
    (Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
       If you need to use the "reset" suggestion, use the correct reset for your Mac.
    • Use your Mac's Disk Utility to repair permissions and then
       download and apply the latest Combo Update.  For your Mac OS,
       the current version is at http://support.apple.com/kb/DL1640
    • Repair permissions again immediately following the system restart
       that completes the Combo update.
    Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of the camera.
    • If nothing else resolves your problem, yours is likely a hardware issue.
       Unless you have a current backup, make one now.
    Then use the final "Troubleshooting" suggestion:
    "... contact Apple or an Apple-Authorized Service Provider for service."
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

  • Photoshop Elements 12 installed on my PC has never worked.

    My Photoshop Elements 12, which I installed as an upgrade to Photoshop Elements 11 on my PC running under Windows 8.1 has never worked.  In cannot find a catalog. My Elements 11 worked fine under Windows 7 and still works fine after I upgraded to Windows 8.1.  I have spent hours on the phone with Adobe techs and have had my local PC professionals examine the PC.  They both concluded it is a bug in Windows 8 but if so I do not know to proceed.  Help would be most appreciated.

    did you see the confirmation?
    if yes, uninstall, run the cleaner and try reinstalling - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    if no, google a youtube video on how to reset preferences.

  • I have updated with os X 10.10.2 and my built in microphone has stopped working. need immediate solution for this.

    Currently I own 13.5" Macbook Air (mid 2012) with OS X 10.10.2 running on it. Ever since I upgraded to it, the built-in microphone has stopped working.
    I made Facetime calls but my voice was not able to transfer/hear on the other side. Moreover i tried checking the "Sound Input levels" in the System Preferences and they all are perfect. When i speak the volume recognition bars does not show any movement or change, indicating no Input Volume.
    Kindly look into this matter and take necessary steps to resolve this issue.

    To add to David Woods comment, make sure your Audio MIDI app is running the latest 4.3.0 found in  Audio MIDI>Preferences> info>Core Audio Framework 4,3.0

  • IPhone 5 won't start or charge or turn on and was not dropped recently and the power button has never worked

    My iPhone 5 was not dropped recently however I went to use it and the screen was black, I plugged it in and nothing happened. When you call it it goes right to voicemail. The power button on it has never worked it always turns on when plugged in... Any ideas?

    Are you certain that the battery has not run out? Have you kept it plugged into a wall outlet for at least 30 minutes to see if it is just needing to be charged?
    If it does not come on after being plugged in for 30 minutes or so, then without a functional Power button you cannot reset it, so you are going to have to try to put it into Recovery mode and restore it:
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    You may not even be able to do this since you cannot proactively turn it off, but you can try.
    Cheers,
    GB

  • Help my FaceTime has never worked

    I have facetime 1.1.1 running on 10.7.2 and facrtime has never worked
    I have verified my email and everything but I cant contact anyone and no one can contact me
    what could be the issues?

    I have the same issue. Does anybody know why this has happened

  • My iPad 4 mic has stopped working

    HI my iPad 4 mic has stopped working tried every thing still no luck

    Hi ronk58,
    Thanks for the question. If I understand correctly, the mic is not working on the iPad. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    Get help with hardware features on your iPhone, iPad, and iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Cheers,
    Mario

Maybe you are looking for

  • Create unique constraint on table

    Hello experts, Is it possible to define a unique constraint on table fields that aren't part of the primary key? Thank you in advance.

  • URGENT: Safari appends BZ2 to most downloaded DMG files!

    I've been downloading a number of DMGs from different websites, and Safari (or perhaps, my unzipping program The Unarchiver) has been adding .BZ2 to the end of them - making them virtually. unopenable. I was terrified there was something wrong with m

  • Procedure to Upload file in IMG

    Dear SAP Bosessss,    Please help me out for uploading the  file for IMG . Any documents will be great help. I have tried to do this with LSMW and SHDB both r not working properly . Thanks in advance Cheers Magesh

  • ATV  "in use" when trying to play iTunes multispeaker from my Mac

    Whenever I try to turn on "multispeakers" from my Mac (so that I can play the music across my ATV sound system) I get an error message saying that the Apple TV speakers cannot be connected as they're "already in use". What steps do I need to perform

  • Predefined data types

    Hi, Can somebody give me details regarding predefined data types in ABAP and equivalent Character types ? For example : F2 type p  can be equivalent to F2(20) type c F2 CURR17 = F2(?)  TYPE c Thanks