Built-in Mic not working since installing windows 7 64bit

Since windows 7 64bit installed in my lap A505-s6965, built-in microphone is not working, in control panel only have High definition audio device (twice and only one of them works fine).
only when i conect and external mic works perfect, cant find any specific driver is ther one?
Solved!
Go to Solution.

Satellite A505-S6965 (PSAP3U-01G00C)
Try both of these drivers. They are not the same!
   Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Size 72,928,112 bytes - Posted 09/04/09)
   Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Size 72,926,808 bytes - Posted 08/03/09)
Sometimes this helps.
   Toshiba Software Installer for Windows 7
-Jerry

Similar Messages

  • Built in Mic not working on Imac Windows 7 boot camp

    I've been doing research and a lot of people seem to have problems with macbook pros mics not working for vista or XP. My current problem is on an Imac running Windows 7 32bit boot camp. The built in mic REFUSES to work be recognized or show any signs of picking up sounds. It won't work in Sound Recorder, Ventrillo or any program. Any help is appreciated if you need any more info let me know. Yes my mac is fully updated with both windows updates and mac updates.
    -Nick.
    Edit: I'm running an Imac Version 10.6.6 intel core 2 duo, 2.4GHz

    Same Here... is there any solution? i have 64 bit windows 7 and still the same problem.. external mics don't work either!

  • LAN not working since installing Windows XP on Satellite P100-160

    Hi,
    I purchased a P100-160 (PSPAAE - 01D00UEN) with Vista pre-installed. Couldn't stand Vista so I have just installed Windows XP.
    However, I cannot get my LAN to work properly. That is, I can get it to work with the 'Cardbus Ethernet Card' plugged in, but i cannot get it to work via the RJ-45 slot!
    Does anyone have any idea what I can do/how I can rectify this.
    Many thanks
    Yvonne

    Hi
    Thanks for your reply.
    As far as I am aware I have downloaded all the drivers. I have checked both of the sites that you indicated, I have downloaded the drivers but there does not seem to be a 'setup' icon/file within the extrated files. There are 'unistaller' files but not a setup one - anyone have any ideas????
    Do you suggest that I install all the drivers from scatch and see what happens? Any other suggetions would be very much appreciated.
    Best regards
    Yvonne
    Message was edited by: yhart

  • Audigy 2 ZS mic not working after installing xp pro

    I have a Audigy 2 ZS
    and my mic no longer works after installing windows xp pro 64 bit. any advice?
    I did install the drivers for xp pro 64 bit.

    bump, does anyone know?

  • Webcam not working after installing Windows 7

    Help please, I have been trying to fix this problem since I purchased this Touchsmart IQ524 and installed Windows 7. I have installed every update on the HP site per insturctions. The only time my webcam works is if I return to vista operating system, which is unexceptable. I should have waited to purchased after windows 7 came out. This is the worse HP computer I have ever owned and the worse customer service. When this orginially happened I was told I had to stay on Windows Vista and customer support did nothing for me. Its been over two years and I thought I would find a repair solution on the HP page, I have tried them all and still now webcam working. I am lost and very angry. I get a code 43 error when trying to load the webcam drivers. My computer keeps giving me a message that windows does not reconize the device installed on my computer. It states its is an unknown divice. I have tried to unstall it, but everytime I restart my computer it reinstalls it.  Please help me, I paid over a $1000.00 when this computer came out, HP gave away free windows 7 update when I purchased this computer and my Webcam has never worked since. 
    Thank you.
    Arby96
    {Personal Information Removed}

    arby96 wrote:
    Help please, I have been trying to fix this problem since I purchased this Touchsmart IQ524 and installed Windows 7. I have installed every update on the HP site per insturctions. The only time my webcam works is if I return to vista operating system, which is unexceptable. I should have waited to purchased after windows 7 came out. This is the worse HP computer I have ever owned and the worse customer service. When this orginially happened I was told I had to stay on Windows Vista and customer support did nothing for me. Its been over two years and I thought I would find a repair solution on the HP page, I have tried them all and still now webcam working. I am lost and very angry. I get a code 43 error when trying to load the webcam drivers. My computer keeps giving me a message that windows does not reconize the device installed on my computer. It states its is an unknown divice. I have tried to unstall it, but everytime I restart my computer it reinstalls it.  Please help me, I paid over a $1000.00 when this computer came out, HP gave away free windows 7 update when I purchased this computer and my Webcam has never worked since. 
    Thank you.
    Arby96
    {Personal Information Removed}
    Which version of Windows 7 is installed? (32 or 64-bit)
    I see there is a BIOS update available only in Vista. You may wish to consider cloning your hard disk to an external storage device. Macrium Reflect Free is ideal  for this. Recover your OS to the Vista OS and apply the BIOS update. Use Macrium Reflect and the clone image file that you created to return your notebook to Windows 7. Once you have done that, try the webcam updates available at the HP web support portal for your TouchSmart notebook.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • ITunes not working since installing 11.3(54) on a Macbook Pro.

    Since installing iTunes 11.3 (54) on my Macbook Pro iTunes will now work. No music, radio, movies, etc.  Nothing plays. Has anyone had a similar issue and found a fix? I downloaded iTunes and installed again but it did not resolve the issue.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Print spooler not working since installing LinkSys WRT 160N

    Since installing my WRT160N my printers have stopped working. All printer drivers have been removed including acrobat and my fax.
    Even if I try reinstalling my drivers, I get the following error:
    Spooler SubSystem App has encountered a problem and needs to close. 
    Prior to this error my firewall was giving me constant warnings about  Pure Networks Admin assistant application trying to access the same files(i.e. nmctxth.exe). Even though I allowed it still kept popping up.
    I am using the online armor firewall on a Windows XP system.
    I cannot access the LinkSys Advisor anymore as it will not start.
    Thanks

    I had the exact same thing happen to me.  Installed a WRT 160N on May 10 and have not been able to print since.  Wasn't sure it was the router until I dug into the event log.  This message appears as a warning during the time I was installing:
    Printer Driver Microsoft XPS Document Writer for Windows NT x86 Version-3 was added or updated. Files:- mxdwdrv.dll, unidrvui.dll, mxdwdui.gpd, unidrv.hlp, mxdwdui.dll, mxdwdui.ini, stddtype.gdl, stdnames.gpd, stdschem.gdl, stdschmx.gdl, unidrv.dll, unires.dll, XpsSvcs.dll.
    Apparently we tried to print something a couple of days later and this error appears:
    DCOM got error "The service did not respond to the start or control request in a timely fashion. " attempting to start the service lxcf_device with arguments "" in order to run the server:
    {323CE21C-A448-40AA-BA74-7FCF1E44106F}
    Any help out there?  Windows says I have a spooler dll file missing and also keep getting an error message about "RPC server not available."   What should I do?
    thanks!

  • My built-in webcam stopped working after installing Windows 7 - HELP!!

    I have an HP Pavilion dv6636nr Entertainment Notebook computer.  It came installed with Windows Vista and I just recently installed Windows 7, 32-bit onto it.  The built-in webcam worked for a short time, but now it doesn't even show up in the device manager and no longer functions.  I don't know if there are drivers in conflict or what, but I am very frustrated.  Any help anybody can provide would be greatly appreciated, as HP no longer supports this laptop because it's OLD.   Thanks!

    Hi,
    Please use this to fix
      http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02452221&lc=en&cc=us&dlc=en&product=3761191    
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hp pavilion g6-2305tx left side usb 3.0 not working after installing windows 7 home premium

    Hi ,
    The left usb ports are not working on my pavillion g6 2305tx after a fresh win 7 installation. Already installed chipset drivers, but this doesnt solve the problem.
    Please check the screenshot below.
    Kindly help.
    Thanks

    Hi,
    Please try installing window 7 USB 3.0 driver for the following issue
    For Win 7 64 bit
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?
    cc=us&lc=en&dlc=en&softwareitem=ob-102571-1
    For Win 7 32 bit
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescript
    ion.jsp?
    cc=us&prodSeriesId=5260575&prodNameId=5260578&taskId=135&swItem=w
    k-106309-1
    Regards,
    Sumit
    I am an HP Employee.
    The opinions expressed here are my personal opinions, not of HP.
    Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
    Click on Kudos if my post helped you.

  • Satellite P305D-S8828 BUILT-IN MIC NOT WORKING/ STACTIC

    CAN ANYBODY HELP ME WITH THIS ISSUE???
    I TRIED TO USE MY MIC, BUT IS NOT WORKING, IT SAIS IS WORKING WELL, BUT I ONLY GET STACTIC.
    PLEASE HELP ME!!!
    THANK YOU!!!

    Do you get static as well as any sounds you were attempting to record or just static? Is it picking up anything?
    Try reinstalling the sound drivers.
    Conexant Audio Driver for Windows 7 (32/64)(v4.98.6.61; 09-04-2009; 23.18M)
    - Peter

  • Illustrator CS4 not working since installing Yosemite

    Since installing Yosemite on my Macbook Pro, my CS4 Adobe Illustrator no longer works. The related files in the applications folder also show as being unavailable. All of the other programmes in the CS4 design suite still run without a problem. Can you please let me know how I can fix this issue. Thanks.

    sorry I've not seen this question sooner - I'm here looking of answers to a recent problem with Photoshop CS4 repeatedly crashing in Yosemite - been working fine for months until this week - roll on Serif Affinity Photo!... 
    However. I'm no illustrator expert but I have Ai CS4 on three Macs, all running Yosemite and Ai apparently working just fine as far as I can see (I'm not a frequent user of Ai so rarely touch the surface of features but it launches, opens Ai files supplied by clients and saves my edit just fine.
    HTH
    Steev

  • Help please! Keyboard not working after installing windows XP sp3 on T61

    I just changed to windows XP sp3 in last weekend on my T61. From then on, when I turn on the T61 every morning, the key board is not working, sometimes I could not type password. I need reboot several times to make it work. I installed the keyboard customizer utility from some online information, however, it's not helping. I searched the lenovo support website, but there are lots of drivers there,I don't know which to pick. Does anyone had met the similar issue or know how to solve it? Thanks a million!

    I have exactly the same problem. It is not related to docking for me - just regular standby/resume. A reboot solves the problem. Not exactly what you'd expect from a high-end business model. This is the first time in my over 22 years history of using computers that the keyboard fails randomly. Fix this IMIDIATELY Lenovo!
    Message Edited by Chigu on 06-13-2009 12:39 PM

  • Scanner not working after installing Windows 7

    Just installed Windows 7 and lost the ability to use the scanner function in Adobe.  My scanner still works with my HP C6380 softwar
    e.  Was wondering if another driver was available for Windows 7.  Yes or no, send if possible
    I am usin Acrobat 9.0
    I have already done the following.
    1)    a. Launch Acrobat
           b. Click menu File->Create PDF->From Scanner->Custom Scan...
           c. In Custom Scan dialog, select the driver installed.
           d. Click Options button in Input section.
           e. Set Data Transfer Method as Native Mode.
           f. Initiate Scan process. Or, remove any compression settings in scanner's user's interface while scanning (Set compression to None).
    2) Login with new user Account
    3) Deleted Preferences folder.
    4) Download the update for 9.1.
    5) Repair Acrobat installation.
    6) Scan the image into another application as a TIFFfile, and then convert the TIFF file to a PDF file.

    Does your scanner work without using Acrobat? If not, you should go to HP's web site and see if there is a Windows 7 driver for your scanner you can download and install.
    You should also update Acrobat to 9.3.

  • USBs not working after installing Windows 7. Please assist.

    HP - Beats Special Edition
    Model: 15-p030nr SKU: 7018105
    Problem: 3 USB ports are not working. Does not acknowledge devices plugged into any of the PORTS. 
    I installed Windows 7. I install all the drivers listed on http://support.hp.com/us-en/product/HP-Beats-Speci​al-Edition-15-p000-Notebook-PC/6936229/model/71742​...
    I notice there is not any CHIPSET driver folder. 
    Already attempted START/DEVICE MANAGER/UPDATE DRIVERs. None could be found. 
    Please advise.
    This question was solved.
    View Solution.

    Hi:
    See if downloading and installing the amd chipset drivers works for you.  Reboot after install.
    http://support.amd.com/en-us/download/chipset?os=W​indows%207%20-%2064

  • Built in mic not working

    I just noticed my built in mic is not working at all and I need to use it. I've tried setting it in system preferences but can't get it to do anything. A hardware test has reavealed nothing. BTW the mic input seems to be dead also.
    I thought I'd ask if anyone has any tricks on this before I call Applecare to the rescue.
    Thanks,
    Jim
    PowerMac dual 2.7 G5   Mac OS X (10.4.6)   4.5 GB RAM, .5 TB hdd

    Many G5 Power Mac users have trouble with the built-in microphone - you can see why from the specs.
    http://support.apple.com/specs/powermac/PowerMac_G5_Early2005.html
    The analogue audio-in port on the G5 is line-in and requires a higher-level input than a simple microphone can provide - the usual solution is to use either a powered mic, a mic pre-amp or a USB i/f - some discussion here
    http://discussions.apple.com/thread.jspa?messageID=597246#597246
    and elsewhere if you enter "microphone" in the search box at top right of this forum.
    If, on the other hand, you have a G5 iMac, you may have more fortune in the iMac forum
    http://discussions.apple.com/category.jspa?categoryID=132
    Good Luck.

Maybe you are looking for