Built in mic wont work with desktop version of skype

So i had skype already on the computer when i got it sense it had windows 8 well it just started to show that the skype i was using was going out of date so i decided to follow the link to download the desktop version now it wont work with my mic not sure if it a issue with microsoft end or skypes end. anyone got any ideas how to fix this problem?

Fault Module Name: iTunes.dll
That one often indicates a user-account-specific issue on the PC.
In the course of your troubleshooting to date, have you checked through the user-specific troubleshooting section of the following document?
[iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues|http://support.apple.com/kb/TS1717]

Similar Messages

  • Built in Isight wont work with IChat

    I have the New Macbook and i have used Ichat Video before but now it wont work, i get this message:this computer dose not support video conferencing
    anyone help?

    Adequate.
    The Upload is acceptable.
    iChat will fail at 50kbps (In Video chats with a message)
    The Lowest Spec Apple Suggests for 1-1 Video is 100kbps
    The lowest Apple Spec for 3 and 4 way Video chats is 384k but I have done passable ones at 256k.
    If System Preferences > Quicktime > Streaming is left at Automatic in Leopard iChat reads this as 384k (it should be set to 1.5Mbps and iChat restarted if Changed)
    Have you tested at different times ?
    IS that the Best speed with the service you have ?
    Is that speed near what they say they are selling you ?
    The Speeds you quote should not get you the Too Slow Info message.
    Is that Internet Connection shared with other computers ?
    Were you doing a download ?
    Both will effect the amount of the Speed (called Bandwidth) that you get.
    Think of a Freeway as you enter a city in rush hour. It might be a road you can do the national speed Limit but you may not be able to go that fast due to other traffic.
    12:34 PM Monday; January 19, 2009

  • ISight is not working with latest version of Skype

    I downloaed the most recent version of Skype but the iSight will not recognize the camera.  Camera works in photobooth, iChat, Facetime, etc.  Can't figure out what the problem is.

    erin238 wrote: ... Skype ... iSight will not recognize the camera...
    iSight is the camera.  I expect you mean that Skype will not recognize the camera.
    (1) Did you restart Mac and try again?
    (2) Did you use Disk Utility to repair permissions before and after installing Skype?
    (3) Because Skype is your only problem app, have you checked Skype support such as
       https://support.skype.com/en/faq/FA10931/   and
       https://support.skype.com/en-us/category/VIDEO/
    There are Skype-specific tips there that may help you.
    Do NOT add any drivers.  All needed iSight driver software is included in your OS X 10.6.8
    You can also search Skype's dedicated forum for Mac http://community.skype.com/t5/Mac/bd-p/Mac
    (4) Your first download or install may have been faulty.  If you have not already done so, try downloading the latest Skype version again and reinstalling? Remember to repair permissions before and after the reinstall.
    Message was edited by: EZ Jim

  • Why wont Google Chrome open and says it wont work with this version of mac os 10

    I just bought a macbook and when I went to instal Google Chrome it told me it isnt compatable with mac os 10

    You should be able to update to OS X 10.6, or, if the Macbook is a late-2006 or newer one, to 10.7
    You can still buy 10.6 from the Apple Store - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    OS X 10.7 should be in the Mac App Store and is only available by downloading it from the online Mac App Store, but you will need 10.6 to get the store in the first place (the Mac App Store appeared with iOS 10.6.6).

  • What web cams with built in mics will work with the MAC PRO

    I have my MAC PRO conected to my HD TV, not a monitor. I would like, to start using Skpe.

    If you do a google search on say, os x web cameras, you would ffind pages like the following:
    List of compatible USB webcams for macintosh
    Mac Webcams That Just Work

  • Could not load the Multiprocessor Support module because it wont work with

    Here is a strange error message, there are actually 2.
    But they arent making PSE 8 unusable, just very annoying.
    Here is the first one,,,,,,,,,
    "Could not load the Multiprocessor Support module because it wont work with this version of photoshop."
    When I open PSE 8, on my new Intel Mac, I get this message and nobody seems to know what the problem is.
    My new Mac has 2 processors? Could that be what the message is saying?
    But when I click the error message away, PSE 8 works fine.
    There is another one too,
    "Could not load the FastCore Routines module because it doest not work with this version of photoshop."
    I just click it away and no problem, just a pita.
    So if they dont effect it, I shouldnt worry, but my classmates are concerned.
    Do you here have any idea what it is, and how to get rid of it?
    There is info on the web about it, but no solutions.
    Thank you,
    Jane

    This is interessting, as does my new Mac have 2 processors or 2 cores?  I havent come across how this works yet, nor how to find it on my Mac.
    Yes, I just found a site which explains it well,
    http://macperformanceguide.com/Optimizing-Cores.html
    I have one processor with 2 cores.
    And the equivalent of the Task Manager is the Activity Monitor, where I see only one processor.
    You sure explained this well!   I now think we can find the problem, though its not effecting either my PS or PSE, its just an annoying message that I have to click away.
    http://kb2.adobe.com/cps/407/kb407809.html
    Is what Adobe tells us, this is for Windows, but it could apply to Macs?
    I have tons of third party plug ins, and this problem is within the last month, and I didnt see the error messages before.  Thats confusing, as I would have thought it would have shown up right from the start.
    I just moved some of my plug ins, lets see if this changes anything, nope, but only one message appeared this time.
    This will be fun to see what the real answer is!  As I find out more, I will add it here.
    Thank you,
    Jane

  • Anyone with a hint ref. why my office package wont work after showing this message: "Check with the developer to make sure it works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates"

    also, I have to mention I already reinstalled package and nothing works. Help please!

    Hi, thanks for getting back. Here is the full content on the window that pops up every time I click on my Word icon: "Microsoft Word cannot be opened because of a problem. Check with the developer to make sure Microsoft Word works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X. Click Report to see more detailed information and send a report to Apple". I reinstalled the application, and everything else is updated, so I am not sure what to do.

  • My build in hp mic wont work

    when im on skype the other person cant hear me and when doing online karaoke the mic wont work. i click the speaker at the bottom and everything seems to be okay what do i do? i have a hp pavilion g7 with windows 7

    Hi nayaa,
    Welcome to the HPCommunity, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you are having a problem with built in mic on your Pavilion. Here is a link on setting default audio and recording device. The first part of the link is for setting default audio device but if you scroll down it will show you how to set the default recording device. If that doesn't work then reply back with your product number and we will look at installing a driver.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • I own Adobe Creative Suite 5 Design Premium Upgrade and I bought the upgrade to Adobe Creative Suite 6 Production Premium but it wont work with my serial number what have I done wrong

    Hi Mark,
    I own Adobe Creative Suite 5 Design Premium Upgrade and I bought the upgrade to Adobe Creative Suite 6 Production Premium but it wont work with my serial number what have I done wrong
    Mick

    Moving this discussion to the Downloading, Installing, Setting Up forum.
    Aussimick you will want to enter in the qualifying serial number from the full version of Adobe software you purchased.  You can find the serial numbers located under your account by following the steps listed in Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  • Can anyone help me out? My Iphone 4S's mic wont work after ios 6 upgrade

    Can anyone help me out? My Iphone 4S's mic wont work when Im making a call and I can hear them, but when I turn on the speaker option, they can hear me. It wont work with Siri either. Can anyone give me any suggestions? I've already tried rebooting the phone. I tried doing a restore from backup but should i do a full restore? Thanks

    Restore your device as NEW.  Before you add any apps to it (other than the ones that come with iOS 6), try out the phone.  If it still doesn't work, you'll need to go to Apple for phone replacement.

  • Skype wont work with my mac os 10.5.8

    afternoon, tried to download skype on my power book g4 and it after download I try to open the dm and it says wont work with this artitecture.
    I am running 10.5.8  after I have download the dm the window that I should put it into the applications had like a do not enter symbol.
    Thank you for your help

    Your Mac is too old to run it.
    http://www.skype.com/en/download-skype/skype-for-mac/
    Click the system requirements on that page & you will see…
    1GHz Intel processor.
    Mac OS X 10.5.8+.
    100 MB free disk space.
    Either USB or regular headset if your Mac does not have a built-in microphone.
    Download drivers if you are using an external webcam.
    For voice calls recommend broadband connection with 100 kbps down / 100 kbps up.
    For group video calling everyone on the call needs Skype 5.0 for Windows or Mac or higher plus webcams. For best quality we recommend you use a high-speed broadband connection of 4Mbps down/512kbps up and a computer with a Core 2 Duo 1.8 GHz processor. As a minimum you’ll need a high-speed broad connection of 512kbps down/128kbps up and a computer with a 1 GHz processor.
    Your Mac has a Power PC processor not an Intel CPU.
    See Skype's FAQ for more info…
    https://support.skype.com/en/faq/FA34492/is-skype-for-mac-being-discontinued-on- mac-os-x-10-4-tiger-and-below-as-well-as-on-mac-devices-running-on-powerpc-archi tecture

  • My built in iSight only works with photobooth

    the built in camera only works wiith the application photobooth. it wont work with aim, yahoo messenger, not even chatroulette. anyone know how to fix it?
    i have an 2010 iMac

    Hi,
    You are trying this with only one Application open at a time ?
    <
    9:57 PM      Wednesday; June 22, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Ipod touch built-in speakers wont work anymore. please help

    Like I said my ipod touch built in speakers wont work now yesterday I was able to hear and use them when I was using the pianist app from the itunes store and it worked fine and today I redownloaded the digidrummer lite app since my old one for some reason didnt work and once I did download the app I synced to my ipod and tried to play and noticed that no sound came out so I tried other apps and also my music and also no sound. with headphones connected it works fine sound comes out and all.

    K, so last night I tried the home+sleep/wake button hold thing and reset it that way and also just normal shutoffs which didnt fix it and also tried the ideas that you guys said and no go. everynow and then it would make the sound when I unlock it. so i just left it on and let the battery die see if that would do something it got to 10% and shuts off i guess so then i charged it on my stereo system with an ipod dock and was listening to music then i disconected it and to my suprise it started playing through the internal speakers again. I was skeptical at first so I turned it off and tried again it worked. so i went to the app that I think caused the problem in the first place called digidrummer lite I was able to hear the drums tom toms etc went to the home menu tried again played that app once more but this time there was no sound. I went to my music and everynow and then it would play but fade out or not play at all. so I took digidrummer off and so far the speakers are working again but I will still need to test them more.

  • External isight wont work with imac g4

    Hello,
    I recently purchased a second hand isight camera using ebay.
    I have an older imac g4 and the isight wont work with it at all.
    I have scoured the forums on this topic and looked through all of EZ Jim's suggestions but I think my problem is a little bit different.
    I'll explain exactly what happens and my troubleshooting so far...
    The imac G4 is powered off, I plug in the external isight via firewire 400
    The imac boots up into leopard 10.5.8 (using leopard assist)
    In system profiler the isight is listed under the firewire tab.
    ( I can post system profiler info on this if its needed)
    When I turn on the camera ichat launches, but then in the video tab it says no camera is connected.
    Photobooth just has the no camera sign, but interestingly when ichat is opened photobooth says "camera off"
    sometimes photobooth even lets me click the photo button, it counts down but then it doesnt take a picture... obviously!
    Skype doesnt work.
    I have an imac 24" running snow leopard 10.6.6 .... that also detects the camera but it won't work with any application such as skype or ichat.
    I have tried (on my G4) unplugging my usb bluetooth module but nothing changes.
    My G4 is connected via ethernet to an external router.
    The firewire cable seems ok, I dont have any other firewire devices, but if it was a problem with the BUS or the cable then im guessing it wouldnt show in system profiler.
    I am thinking the camera is probably damaged, but before I start a paypal enquiry I would like to see if it is just my computer or a setting i need to change.
    (oh I used the application isight updater in core services but the install button is greyed out)
    Any help would be amazing!!
    Thanks!!!

    Well, about all you can do would be to try a different and known good
    FireWire cable, as a replacement for what may be a defective FW400
    cable that came with the iSight camera. The cable can be defective
    with one bad wire, yet sometimes appear available to the computer.
    • How to Troubleshoot iSight (note external vs internal)
    http://support.apple.com/kb/ht2090
    • iMac G5 (iSight), & Intel-based iMac: Using External video camera:
    http://support.apple.com/kb/HT2819
    If you know of someone with an older Mac without a built-in iSight
    camera, to test that one on, this may be an OK idea. Not sure if you
    could get any traction by taking the camera to an Apple Specialist
    and ask if they could check it out for you; that may also cost you.
    {And since your computer does not officially support Leopard 10.5,
    the other avenues of support would probably not be open to you.
    At least not with the old iMac G4 and an unsupported 10.5 install.}
    I have an external iSight camera which was included with my G4 Mini
    1.5GHz model, and that appeared to work OK with 10.5.8 at one point.
    But I really have no need for it, since I don't use photobooth & so on.
    And haven't tried that with my iMac G4 computers at all. No need to.
    With a computer not equipped with an iSight camera, the Leopard 10.5
    installation should still support the eventual addition of one; even if the
    computer itself appears to not officially support a Leopard 10.5 install.
    (You refer to Leopard Assist, a means to install in slower CPU Macs.)
    The FW cable is about the most easy to consider at this point.
    In the course of a year, I've found good replacement cables at
    several places, even those at thrift stores in perfect shape, work
    and I use them for FW external hard disk drives, primarily. To have
    spares is nearly always a good idea. Test & keep known good ones.
    I'm not certain how the external iSight FW camera may work on
    a newer Intel-based 24" iMac with a built-in iSight camera, too.
    Does your 24" computer have FireWire 400+800 ports? Can you
    choose an external iSight camera and ignore the built-in one?
    These secondary topics have probably been discussed in the other
    forum area for Intel-based iMac computer models; if you chose to
    try & use that camera with a model computer with one built-in...
    • Apple - Support - Discussions: for Intel-based iMac
    http://discussions.apple.com/category.jspa?categoryID=189
    There is a possibility, if never tried and the iMac G4 computer was
    acquired second-hand, that the FW port within it may be band; but
    the cable is the first item since it is cheapest, in troubleshooting.
    So, anyway, the hour is late here (1AM) so hopefully the matter
    can be resolved with a known-good replacement FW400 cable.
    You should not have to restart the iMac G4 (800?) model in order
    to get a FireWire item to be recognized. It should appear in the
    System Profiler's list under FireWire, such as things normally do.
    Of course, the camera could be defective as well. Been some
    time since they were available on sale, new from Apple...
    You could ask around to find out if there is a way to use that
    external iSight camera with your newer Intel-based 24" Mac
    by someone having it ignore its own built-in camera; in a
    way as to not affect its normal operation, that is.
    Good luck & happy computing!
    +{ edited 2x }+

  • Does Dreamweaver Work with Serena Version Manager

    Does Dreamweaver Work with Serena Version Manager? If not,
    what does everyone use for source control?

    Harsh324,
    So once you have Serena configured in LabVIEW are you able to right-click in the project and select Show Differences?  As mentioned in this tutorial the Graphical Differencing feature is only officially supported by Visual Source Safe and Perforce, however you may be able to get some information from this.  I am not familiar with Serena, so it could be possible that it has something similar built in as well. 
    Please let me know if you get any results by selecting the option from the project.  Thanks!
    Andy F.
    National Instruments

Maybe you are looking for