Built In Microphone Has Disappeared
Heyas, I don't know if this is a Lenovo or Windows problem, to be honest, but considering it had to do with my hardware, I figured this was the best place to start!
I have a T61 7659XAU, running Windows Vista w/ Service Pack 1. And, well, the built in microphone seems to no longer be installed. I have used it several times in the past, but haven't for a few months but something came up where I blah blah you're probably smart enough to figure out that I want to use it.
However, when I go into my control panel, it says that no audio recording devices are installed. I didn't do anything here, but I figure someone else probably uninstalled it or something, and I don't know how to bring it back up. Any help would make me very happy!
yes i was, but the issue has resolved itself. after a couple of restarts it reappeared and is working fine. straaaaange.
Anyone know why that might be?
Thanks anyway.
x
Similar Messages
-
Currently I own 13.5" Macbook Air (mid 2012) with OS X 10.10.2 running on it. Ever since I upgraded to it, the built-in microphone has stopped working.
I made Facetime calls but my voice was not able to transfer/hear on the other side. Moreover i tried checking the "Sound Input levels" in the System Preferences and they all are perfect. When i speak the volume recognition bars does not show any movement or change, indicating no Input Volume.
Kindly look into this matter and take necessary steps to resolve this issue.To add to David Woods comment, make sure your Audio MIDI app is running the latest 4.3.0 found in Audio MIDI>Preferences> info>Core Audio Framework 4,3.0
-
Satellite A300-1NO - built in microphone has dim sound
Hello everybody.
I've noticed that my built in microphone has very low volume. When I'm voice chatting, people hardly hear what i am speaking. I've got Realtek HD Audio Manager, downloaded the sound driver from the Toshiba website. Everything set to 100%, microphone boost is only 20 dB because 30dB is too noisy. I checked webcam assistant too. I don't know what should I do.
When I use external microphone, it sounds like OK. But the built in mic is quiet and flat, dim.i downloaded the driver from there, "sound-20080728120308.zip" now i have 6.0.1.5599 version of sound driver. now it's louder, but i don't know if it is now good quality or not. i've uploaded a recorded voice
everything set to 100% percent, boost is 30 dB. noise reduction is ON, acoustic echo cancellation ON, default format 16bit, 48000Hz (DVD quality)
my external microphone is still better than built in. at least built in mic is now louder than it was -
Built-In Output has disappeared?
I was using my mac today. Just playing MineCraft. I left to eat dinner with my family and after that i went gaming on another PC. When I returned to the mac 4 hours later he was still running. So I quit all applications but did not shut down. I set the screen into sleep mode using an active screen corner and went doing something else.
I came back like 1 minute later and the mac was shutdown. I started it and while it was booting i disconnected my external speakers, USB Hub, ThunderBold-DVI Display and the charger and left only one external Hard Drive connected.
Once it was booted I logged in and tried to listen to some music. This was not possible because I could not hear anything. I went into SystemPreferences/Audio/Output and the option for Built-In Output was gone. The only options where Digital out, SoundFlower 32bit and SoundFlower 64bit. (For the record: SoundFlower is a utility software which I use for recording the system sound for my videos.) I could not change the volume and Couldn't hear anything through my recordings in SoundFlower. So I rebooted. I heard the duuun sound at the startup so I knew the output was working correctly but once again when I logged in I couldn't hear anything.
Nothing is working. I can't get it to work through System Preferences nor Audio MIDI Setup. If I connect my earphones the output changes the Headphones and that works but when I disconnect it my mac becomes terribly slow for like a minute and Audio MIDI Setup crashes and the output changes to Digital Out. There is no red laser light in the plug on the left of my mac so I am out of ideas of what might cause this issue.
Any leads?Start out with these ! Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support How to Reset NVRAM on your Mac - Apple Support if issue still persists look inside the audio jack see if the light is on.
-
Does anyone know how to reinstall it as I need it to use on Skype. Thank you.
This question was solved.
View Solution.You're very welcome.
Windows 7 is a great operating system, and normally the drivers it installs are fine. But the generic drivers that are loaded don't always cover everything, such as what you experienced with your mike not working, but the speakers did.
I once had a similar issue...I installed Windows 7 on a HP dc7600, and the audio worked fine out of my plugged in speakers, but it did not work out of the built in PC speaker. I was at a loss to figure out why. I knew the speaker had worked in XP, so I knew it wasn't broken.
On a hunch, I went to the Realtek website and downloaded the newest audio drivers for Windows 7, and voila, my internal PC speaker worked fine.
Enjoy!
Paul -
ITunes App has disappeared!
Hello. My "in built" ITunes App has disappeared from my IPad... No way of downloading as Safaribno longer "finds the page".
Help! Thank you :)The iTunes app can't be deleted, so it's there somewhere.
Cheers, Tom -
After upgrading to Lion, my Macbook Air's built in iSight camera has disappeared. I'm not sure how to get it recognized again. Help -Sami
Well, if you did then you may be able to track it, if you did not it's not possible.
-
Which Canon Camcorder has the best built in microphone for recording musical instruments
Which Canon Camcorder in the affordable price range has the best built in onboard microphone for recording musical instruments
Thanks.TheBee,
Thanks for writing!
The built-in microphones on the camcorder are fairly similar. When you're recording music, we recommend the use of an external microphone.
The mic you use really depends on what you're recording and where.
So we may better assist you, please provide a bit of information regarding the type of recordings you'll be making, the music and the setting (i.e. what kind of venue, your distance to the music, etc).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Does T400 has built-in microphone?
Hi
Does T400 offer a built-in microphone for conference call and things like that?
Thanks
Solved!
Go to Solution.Hello,
simply answer, yes. It should be availiable in your sound manager.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español -
How do I use the built-in microphone on my iMac while using Windows XP?
My iMac has a built-in microphone. My computer is set up with a partition to run either mac or windows. I would like to use the built-in microphone feature when I am using Windows XP. Is there any way that I can do this?
Hi and welcome to Discussions,
assuming you have installed the neccessary BootCamp Drivers from the OSX Leopard DVD the internal mic is useable with any kind of recording software.
Windows itself has a rather rudimentary Audiorecorder program built-in.
For a more sophisticated recording program have a look at Audacity http://audacity.sourceforge.net/
Regards
Stefan -
[SOLVED] HP420 and Built-in microphone don't work.
I have a trouble with my on-board microphone in my laptop (hp-420), it was working some months ago (with previous kernel) and I didn't use it for a while, after several upgrades now I tired to use it and it doesn't work. Second microphone, a jack, doesn't work either, and it's arch related, because I did some tests in windows (have dual boot) and both the built-in and jack work fine. So far I have tried testing alsa configurations, played with preferences and some other things I have read over the internet and in arch forums, but no luck at all. I may think it's kernel related but I'm not sure as I'm not an expert. Also sound works fine, it's only the built in microphone the one I can not get to work. I whish someone could help me or guide me.
So all the info I could gather about my machine and the sound
!!Linux Distribution
Arch Linux
!!DMI Information
Manufacturer: Hewlett-Packard
Product Name: HP 420
Product Version: F.04
!!Kernel Information
Kernel release: 2.6.37-ARCH
Operating System: GNU/Linux
Architecture: x86_64
Processor: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz
SMP Enabled: Yes
!!ALSA Version
Driver version: 1.0.23
Library version: 1.0.24.1
Utilities version: 1.0.24.2
!!Loaded ALSA modules
snd_hda_intel
!!Sound Servers on this system
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
Jack:
Installed - Yes (/usr/bin/jackd)
Running - No
!!Soundcards recognised by ALSA
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xd8a00000 irq 47
!!PCI Soundcards installed in the system
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
00:1b.0 0403: 8086:293e (rev 03)
Subsystem: 103c:1526
!!Modprobe options (Sound related)
snd-hda-intel: model=hp
snd-hda-intel: model=hp
!!Loaded sound module options
!!Module: snd_hda_intel
bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : hp,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
power_save : 0
power_save_controller : N
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
!!HDA-Intel Codec information
--startcollapse--
Codec: IDT 92HD88B3
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x111d7666
Subsystem Id: 0x103c1526
Revision Id: 0x100105
No Modem Function Group found
Default PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
GPIO: io=3, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Power-Map: 0x00
Node 0x0a [Pin Complex] wcaps 0x400583: Stereo Amp-In
Control: name="Front Mic Jack Mode", index=0, device=0
ControlAmp: chs=0, dir=In, idx=0, ofs=0
Control: name="Mic Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x0001173c: IN OUT HP EAPD Detect
Vref caps: HIZ 50 GRD 80
EAPD 0x2: EAPD
Pin Default 0x02a19020: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=02, enabled=1
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x0b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x0221401f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=01, enabled=1
Power: setting=D0, actual=D0
Connection: 3
0x13 0x14* 0x1c
Node 0x0c [Pin Complex] wcaps 0x400583: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00011734: IN OUT EAPD Detect
Vref caps: HIZ 50 GRD 80
EAPD 0x2: EAPD
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x0d [Pin Complex] wcaps 0x400500: Mono
Pincap 0x00010050: OUT EAPD Balanced
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power: setting=D0, actual=D0
Connection: 1
0x1a
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Pin Complex] wcaps 0x400583: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 3
0x13 0x14* 0x1c
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Pin Complex] wcaps 0x400483: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00000024: IN Detect
Pin Default 0x90a60130: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Node 0x12 [Vendor Defined Widget] wcaps 0xf00503: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Power: setting=D0, actual=D0
Connection: 1
0x20
Node 0x13 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=63
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="STAC92xx Analog", type="Audio", device=0
Amp-Out caps: N/A
Amp-Out vals: [0x7f 0x7f]
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x14 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=63
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: N/A
Amp-Out vals: [0x7f 0x7f]
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x15 [Audio Input] wcaps 0x1d0541: Stereo
Device: name="STAC92xx Analog", type="Audio", device=0
Converter: stream=1, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x17
Processing caps: benign=0, ncoeff=0
Node 0x16 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x18
Processing caps: benign=0, ncoeff=0
Node 0x17 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x0f 0x0f]
Power: setting=D0, actual=D0
Connection: 7
0x0c 0x0e 0x0f 0x1b 0x11 0x12 0x0a*
Node 0x18 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L
Control: name="Capture Volume", index=1, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Capture Switch", index=1, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x0d 0x0d]
Power: setting=D0, actual=D0
Connection: 7
0x0c 0x0e 0x0f 0x1b 0x11 0x12 0x0a*
Node 0x19 [Audio Selector] wcaps 0x300501: Stereo
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x1a [Audio Mixer] wcaps 0x200500: Mono
Power: setting=D0, actual=D0
Connection: 1
0x19
Node 0x1b [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97]
Power: setting=D0, actual=D0
Connection: 6
0x0c 0x0e 0x0f 0x13 0x14 0x0a
Node 0x1c [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x9f 0x9f]
Power: setting=D0, actual=D0
Connection: 1
0x1b
Node 0x1d [Audio Output] wcaps 0x4061d: Stereo Digital Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power: setting=D0, actual=D0
Delay: 4 samples
Node 0x1e [Audio Output] wcaps 0x4061d: Stereo Digital Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power: setting=D0, actual=D0
Delay: 4 samples
Node 0x1f [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x1d
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000034: IN OUT Detect
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x1e
Node 0x21 [Beep Generator Widget] wcaps 0x70040c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1
Amp-Out vals: [0x00]
Power: setting=D0, actual=D0
Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono
Codec: Intel Cantiga HDMI
Address: 2
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862802
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6211: 8-Channels Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Device: name="HDMI 0", type="HDMI", device=3
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Node 0x03 [Pin Complex] wcaps 0x40739d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00000094: OUT Detect HDMI
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=03, enabled=1
Connection: 1
0x02
--endcollapse--
!!ALSA Device nodes
crw-rw---- 1 root audio 116, 9 Mar 29 10:14 /dev/snd/controlC0
crw-rw---- 1 root audio 116, 8 Mar 29 10:14 /dev/snd/hwC0D0
crw-rw---- 1 root audio 116, 7 Mar 29 10:14 /dev/snd/hwC0D2
crw-rw---- 1 root audio 116, 6 Mar 29 13:40 /dev/snd/pcmC0D0c
crw-rw---- 1 root audio 116, 5 Mar 29 13:40 /dev/snd/pcmC0D0p
crw-rw---- 1 root audio 116, 4 Mar 29 10:14 /dev/snd/pcmC0D3p
crw-rw---- 1 root audio 116, 3 Mar 29 10:14 /dev/snd/seq
crw-rw---- 1 root audio 116, 2 Mar 29 10:14 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Mar 29 10:14 .
drwxr-xr-x 3 root root 220 Mar 29 10:14 ..
lrwxrwxrwx 1 root root 12 Mar 29 10:14 pci-0000:00:1b.0 -> ../controlC0
!!Aplay/Arecord output
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
!!Amixer output
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0xd8a00000 irq 47'
Mixer name : 'Intel Cantiga HDMI'
Components : 'HDA:111d7666,103c1526,00100105 HDA:80862802,80860101,00100000'
Controls : 18
Simple ctrls : 10
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front Mic Jack Mode',0
Capabilities: enum
Items: 'Mic In' 'Line In'
Item0: 'Mic In'
Simple mixer control 'Mic',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 3
Front Left: Capture 0 [0%] [0.00dB]
Front Right: Capture 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 15 [100%] [22.50dB] [on]
Front Right: Capture 15 [100%] [22.50dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 13 [87%] [19.50dB] [on]
Front Right: Capture 13 [87%] [19.50dB] [on]
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 0 [0%] [-30.00dB]
Front Right: Capture 0 [0%] [-30.00dB]
!!Alsactl output
--startcollapse--
state.Intel {
control.1 {
iface MIXER
name 'Speaker Playback Volume'
value.0 64
value.1 64
comment {
access 'read write'
type INTEGER
count 2
range '0 - 64'
dbmin -4800
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.2 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.3 {
iface MIXER
name 'Front Mic Jack Mode'
value 'Mic In'
comment {
access 'read write'
type ENUMERATED
count 1
item.0 'Mic In'
item.1 'Line In'
control.4 {
iface MIXER
name 'Headphone Playback Volume'
value.0 64
value.1 64
comment {
access 'read write'
type INTEGER
count 2
range '0 - 64'
dbmin -4800
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.5 {
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.6 {
iface MIXER
name 'Capture Volume'
value.0 15
value.1 15
comment {
access 'read write'
type INTEGER
count 2
range '0 - 15'
dbmin 0
dbmax 2250
dbvalue.0 2250
dbvalue.1 2250
control.7 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.8 {
iface MIXER
name 'Capture Volume'
index 1
value.0 13
value.1 13
comment {
access 'read write'
type INTEGER
count 2
range '0 - 15'
dbmin 0
dbmax 2250
dbvalue.0 1950
dbvalue.1 1950
control.9 {
iface MIXER
name 'Capture Switch'
index 1
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.10 {
iface MIXER
name 'Mic Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
control.11 {
iface MIXER
name 'Master Playback Volume'
value 64
comment {
access 'read write'
type INTEGER
count 1
range '0 - 64'
dbmin -9999999
dbmax 0
dbvalue.0 0
control.12 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.13 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.14 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.15 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.16 {
iface MIXER
name 'IEC958 Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.17 {
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.18 {
iface MIXER
name 'Digital Capture Volume'
value.0 0
value.1 0
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 120'
tlv '0000000100000008fffff44800000032'
dbmin -3000
dbmax 3000
dbvalue.0 -3000
dbvalue.1 -3000
--endcollapse--
!!All Loaded Modules
Module
nls_cp437
vfat
fat
usb_storage
uas
michael_mic
arc4
ecb
cryptd
aes_x86_64
aes_generic
cpufreq_ondemand
ipv6
usbhid
hid
btusb
bluetooth
uvcvideo
videodev
v4l1_compat
v4l2_compat_ioctl32
snd_hda_codec_hdmi
snd_hda_codec_idt
i915
snd_hda_intel
drm_kms_helper
snd_seq_dummy
drm
joydev
snd_seq_oss
snd_seq_midi_event
snd_seq
snd_seq_device
snd_hda_codec
hp_wmi
i2c_algo_bit
sparse_keymap
snd_hwdep
snd_pcm_oss
i2c_core
acpi_cpufreq
iTCO_wdt
intel_agp
snd_pcm
uhci_hcd
ehci_hcd
snd_mixer_oss
usbcore
r8192se_pci
intel_gtt
sg
freq_table
snd_timer
video
r8169
iTCO_vendor_support
wmi
output
psmouse
battery
container
pcspkr
serio_raw
ac
button
mii
thermal
fan
cfg80211
evdev
processor
snd
soundcore
snd_page_alloc
rfkill
mperf
fuse
ext4
mbcache
jbd2
crc16
sr_mod
sd_mod
cdrom
ahci
libahci
libata
scsi_mod
!!Sysfs Files
/sys/class/sound/hwC0D0/init_pin_configs:
0x0a 0x02a19020
0x0b 0x0221401f
0x0c 0x40f000f0
0x0d 0x90170110
0x0f 0x40f000f0
0x11 0x90a60130
0x1f 0x40f000f0
0x20 0x40f000f0
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D2/init_pin_configs:
0x03 0x18560010
/sys/class/sound/hwC0D2/driver_pin_configs:
/sys/class/sound/hwC0D2/user_pin_configs:
/sys/class/sound/hwC0D2/init_verbs:
!!ALSA/HDA dmesg
Hardware name: HP 420
Modules linked in: r8192se_pci( ) intel_gtt sg freq_table snd_timer video r8169 iTCO_vendor_support wmi( ) output psmouse battery container pcspkr serio_raw ac button mii thermal( ) fan cfg80211 evdev processor snd soundcore snd_page_alloc rfkill mperf fuse ext4 mbcache jbd2 crc16 sr_mod sd_mod cdrom ahci libahci libata scsi_mod
Pid: 788, comm: modprobe Not tainted 2.6.37-ARCH #1
[drm] Initialized drm 1.1.0 20060810
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Last edited by mann138 (2011-04-11 15:57:00)ewaller wrote:
What is under the switches tab?
Oh -- By the way, that picture is over the size limit defined in the forum rules in tems of pixels, but the file size is okay. I'll let it slide. Watch the bumping as well.
If you want to post the switches tab, upload it to someplace like http://img3.imageshack.us/, copy the thumbnail (which has the link to the original) back here, and you are golden.
I had a bear of a time getting the microphone working on my HP DV4, but it does work. I'll look at the set up when I get home tonight [USA-PDT].
Sorry for the picture and the "bumping"... I have asked in irc in arch and alsa channels and no luck yet... one guy from alsa said I had to wait for the alsa-driver-1.0.24 package (currently I have alsa-driver-1.0.23) but it is weird because the microphone worked some months ago...
So here is what it is under the switches tab -
Memory on phone has disappeared overnight!
Hi
I have the 6300.
It has a built in memory card which has disappeared overnight.
Does anyone have any ideas?
Much appreciated.
ThanksWhoa! Maybe someone has sneaked in to your phone.
-
I am recording stuff on garageband and i need to hear other tracks as I'm playing, but I have to play them through external earphones so that the they don't overlap onto the one I'm creating.
The wire for my earphones has an external microphone attached to it, however, I have no desire to use this microphone as it is ridiculously sensitive and picks up even the slightest vibrations when the wires rub against my cheek or my t-shirt.
Therefore, I need to use the built-in microphone when recording. Except that, whenever I plug in the earphones to the iMac, garageband automatically switches to the external microphone. I went in to the Garageband preferences, and saw that it was set up for recording through the built-in mic, which is strange because input is clearly coming from the external.
So, I went into the iMac System preferences > sound > input. There are three options here: Internal microphone, Line-in, and Soundbooth 3.0.
What I found is that whenever I plug my earphones into the iMac, the option for 'Internal microphone' changes into an option for 'external microphone'. Now, I am fairly sure that an 'external microphone' is EXACTLY the same thing as a 'Line-in', but I'm not so sure now, so please feel free to correct me if I am wrong.
How do I stop the iMac from changing 'Internal microphone' to 'External microphone'? It is very important that I am able use the earphones and the Built-in Mic at the same time.Hi John,
I think the only way is to get an iMic...
http://www.bhphotovideo.com/bnh/controller/home?O=&sku=797644&is=REG&Q=&A=detail s -
How to use built in microphone on ipad3 just for audio no dictation
If you just want to record a a voice memo, use the included Voice Memos app. That has nothing to do with Siri.
-
After my iPad 2 upgraded to IOS 5.0.1, built in Microphone not working
Just what I said, my iPad 2 upgraded to IOS 5.0.1 from IOS 5 on last week, the built in microphone is not working anymore, I can't record the video with sound, and called my friends with Facetime, they can't heard my voice. Then I already restored IOS 5.0.1 for a few time and built in microphone is still not working. Does anyone iPad 2 has the same issue after using IOS 5.0.1? And anyone can help me to fix this? Thx.
I've read other posts about this, and while it seems an odd coincidence, you likely have a faulty microphone. On the right hand side you'll see similar posts. The majority of people who all of the sudden had mic's that wouldn't work after updating, wound up getting their iPads replaced at the Genius Bar at their local Apple Store. You could try rebotting, by pressing and holding BOTH the home and power buttons at the SAME time for at least 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go fo both buttons and your iPad will restart. If that doesn't work, I would not recommend restoring. Instead, make an appointment at the Apple Store and if found defective it will be replaced. Do remember to create a backup before going. It will make setting up a new device exactly as you had it, much much simpler.
Maybe you are looking for
-
[CS4] Free Transform doesn't work in some situations
Hello, I have found a limitation in Photoshop CS4: Trying to use the free transform tool on an unselected "substracted" vector shape with the move tool will not work and will always display the alert "Could not transform because the initial bounding
-
I can't do this iCloud thing, I just do not get it! I looked at so many instructions to try and help me and nothing seems to work. All I want to do is copy and paste all my photo's and videos as I used to before the iphone updated to iOS. Can you hel
-
Client 10g fail to connect to server 8i
Hi everybody. We're having some trouble when a machine with oracle 10g client tries to connect to a server running oracle 8i (8.1.7.0). In fact, we can't connect. The error message that arises with sqlplus is ORA-12564 (connection refused). Changing
-
Email sent with attachments not showing in sent folder
I have recently found that emails I send with an attachment do not show up in my sent folder. They are arriving at recipient but I do not then have a record of the email sent. This is really very annoying and I can see a few other poplin online foru
-
OEM Issue: oemagent stops after some time on specific node on a 3 node RAC system.
We have a 3 node RAC system running 11.2.0.3 . The oemagent keeps failing on 1 particular node and needs to be brought up every now and then. What could be the probable cause of this. Also, I have not seen anything suspicious in the agent logs. Oracl