Built in print button works but does not print full screen

I am using Captivate 7 and trying to use the built in print widget to print off a slide in my project. The problem I'm having is when I attempt to print off a slide using the button it only prints off half of the slide. It seems as if it is not scaling correctly and I don't any setting within the widget to correct this. I'm wondering if I need to adjust my setting elsewhere in the project or maybe there is a better way to print off a slide? Currently I am exporting this project as SWF 1024 X 768. Any ideas would be greatly appreciated!

Captivate's default print widget is hopeless. You need the Intelligent Print widget from CpGurui:
http://www.cpguru.com/intelligent-print-widget-for-adobe-captivate/

Similar Messages

HP Desjet 2540 problem Wireless printer, printer is connected but does not print from pc

I wanted to install my HP Deskjet 2540 printer, the installation went quickly, the printer is installed wirelessly.. but I can't print. I can print from my tablet to the printer. But ofcourse I also need to print from my pc > printer. I already used the HP print and scan doctor.
when I click at print document the printer icon at the bottom appaers and says, 0 documents waiting list.
Please can somebody help me.. it's driving me crazy!

Hi 11111981,
It sounds to me like it could be an issue with the driver. What happened when you used the Print and Scan Doctor?
I suspect the best approach is to remove the driver for the printer server properties and then readd the printer using the HP Setup and Software. Use the instructions below to perform these tasks.
1. In the ‘Devices and Printers’ folder
2. Choose ‘Print server properties'.
Win XP – With no printer selected, click ‘File’ then ‘Server Properties’.
Windows Vista – With no printer selected, press ‘Alt’ then click ‘File’ then ‘Server Properties’.
Windows 7/8 and 8.1 – Select any printer in the ‘Devices and Printers’ folder and click ‘Print Server properties’ above.
3. Click on the ‘Drivers’ tab at the top of ‘Print server properties’ window
4. Choose the printer you want to uninstall and click ‘Remove’
5. Choose 'Remove driver only"
6. The next screen will give a warning, letting you know that deleting the driver package will remove it from the system. Click ‘Yes’ to say that you are sure you want to do this.
If documents are stuck in the print spooler, you may see an error, cancel any documents pending in the print queue r or try restarting the print spooler, then try to remove the driver from ‘Print server properties’ again. If it still won’t remove the package, restarting the computer should resolve this ‘in use’ error and allow the driver to be removed.
7. Open Start > All Programs > HP folder > Deskjet folder > HP Setup and Software
8. Select "Connect a new printer"
9. Follow the on screen instructions
Please let me know if this resolves the issue you are experiencing. If it does not, please run the Print and Scan Doctor again and see if there are any changes, also, please post back with the results from the Print and Scan Doctor as it may help point me in the right direction.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I cannot get my kodak printer to print . it prints test paige but does not print documents

i cannot get my kodak printer to print documents . its prints test paige

Kodak has posted an unsupported hack that has been reported to enable printing to a Kodak printer not supported in OS X 10.10 ("Yosemite"). Perhaps it would have the same effect with some other kinds of printers that aren't supported in Yosemite.
I have not tested the hack myself. As far as I know it will not break the compatibility of printing software that is already compatible with Yosemite. It may degrade the security of the printing system. It's up to you to decide whether that risk is worth taking.

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

This can be the result of selecting the wrong driver. An older, unsupported laser printer will sometimes work with the generic Postscript driver.

Wireless All-in One receives scan and ink level but does not print

My wireless printer was working fine, now it can scan and send scan to my computer, my computer receives ink levels in the utility. Now it will not print from Word or other programs that I was able to print. When I restart the computer with a document in the printer queue, when it gets to my desktop screen, it prints. But still will not print from Word unless I do the restart again. I have restarted the printer(which works with other computers in the house) and even deleted and reloaded the HP program. My computer receives but does not print. I even tried direct usb connection

Hi raavindra,
Welcome to the HP Forums.
I see that you are having some issues when attempting to do a scan or a copy.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

The Power Supply Fan is still working, but does not appear to respond to increased loads, and its speed cannot be increased using SMCFanControl. Any suggestions?

Hi all - My mac pro 1,1 has an enigmatic problem. It's quad-core, 3Ghz, running OS X 10.7.5. The problem began some months back, when running HD video conferences, HD streaming videos and some other graphics-moderate (I won't say intense) uses, such as slide shows in Just Looking. My machine has an ATY, RadeonX1900 card and 2 monitors - both Apple displays, one being 30 inch 2560x1600, the other being 24 inch 1920x1200.
When I start those types of graphics-moderate apps, after about 5 minutes, something would crash (the monitors making a noise as it did) and the displays would both go black. The power did not appear to be fully cut off from the monitors. I think that the underlying applications, however, did not crash. So, I could still hear and speak to people during video conferences, and I could hear the sound tracks of videos.
Attempts to restart the computer and get the monitors back did not immediately work to undo the problem, if done straight away. The only way to correct the problem (so as to have the monitors work) was to wait for a few minutes and then restart.
After a lot of puzzled looking at console logs (and I confess that I am not an expert), I ran into a blank.
But, because of the timing of the crashes (after ~5minutes use) and restarts (after some minutes wait), I reasoned that the problem might be temperature related.
Once on that path of thought, I found this article:
http://worldtv.com/blog/guides_tutorials/fixing_an_overheating_mac_pro_no_expens e_required.php
I installed both Temperature Monitor and SMCFanControl. And I experimented, and got interesting results:
Now to the puzzling bit: SMCFanControl shows that the speed of the Power Supply Fan doesn't vary much, even if I use SMCFanControl to ramp fan speeds right up. All of the other fans react to SMCFanControl, going up to and above 2500rpm when commanded. But the Power Supply Fan does not. Having watched it for a few days now, the Power Supply Fan, according to AFCFanControl, never varies outside of a range from about 600-640 rpm, regardless of what I do with AFCFanControl.
Also (and not surprisingly), whenever the graphics-moderate apps run, when I ramp all the fan speeds up using SMCFanControl, Temperature Monitor shows that the all of the temperatures within the machine plummet, except in the power supply locations. Power Supply Location 2 is the worst affected. Because the Power Supply Fan does not react as the other fans do, the "crashes" still occur.
I could post some screen shots of the read outs of SMCFanControl and Temperature Monitor, although I think I have covered the key points in this post.
It seems that the Power Supply Fan is still working, but does not respond to increased loads.
Instinctively, I'm worried that if that's right, it might be a hard problem to fix. Any suggestions? Help! I would really appreciate them!
Cheers
P

Thanks for your response Grant. I had already read about, and I think excluded, dust in graphics card/fan/assembly as a cause. The entire inside of the computer, including the graphics card/fan/assembly, is as clean as a whistle. It looks clean. I've cleaned the dust out every now and then (including a few days ago). Also, my undersanding (derived from the article, linked in my first post) is that I might expect to see high temperatures in the Northbridge and memory module B if the graphics card was overheating. According to Temperature Monitor, however, locations do not increase in temperature when I run the relevant apps. Finally, the graphics card/assembly does not feel too hot to touch.
It is strange that SMCFanControl lists the Power Supply Fan as being software controllable, if that fan is not. Still, your comments are consistent with my observations, as the fan simply does not respond to software control.
There are two upsides: First, I've something of a work-around. I've worked out what temperature must be achieved in Power Supply Location 2 for a crash to occur, and I can watch that location in Temperature Monitor, terminating the process before that treshold is reached. Of course, that's not ideal. Second, ramping all the other fans up does significantly delay the onset of the problem, and makes recovery time much quicker.
Is there any donwside to peridically ramping up the other fans when running the relevant apps? Given that it causes all of the other locations to cool significantly, could this lessesn the life expecancy of the mahcine? (I don't want to run the fans up all the time - that's like sitting next to a jet ready for take off!)
Also, a correction to my first post: Yesterday, with all the other fans running on full and running an HD streaming video, the Power Supply Fan did, eventually, slowly, come up to ~740rpm, which is much higher than the ~640rpm maximum I had previously seen, and this may have aided delaying the onset of the problem.
I'm not sure where this leaves me? The problem might now be able managed. Well, sort-of. But it's not eliminated.

My camera is working but does not work on skype how do I turn the camera on for Skype

My camer is working but does not work on skype how do I turn the camera on.

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
If that doesnt pass,
Suggest looking here, much success has been found:
http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

USB Drives works, but does not show up in "Safely Remove Hardware"

USB Drives works, but does not show up in "Safely Remove Hardware"
windows 8
USB Drives works, but does not show up in "Safely Remove Hardware"
Here are my symptom
- USB Flash Drives , USB External HDD works normally
- I can see them in "My Computer"
- I can open "Safely Remove Hardware" via Run Command, but there is no device in the list
- They show up as "Disk drives" in device manager
- When I right click their icons in "My Computer", there is no option to "Eject" them
- In "Disk Management", they show up as "Basic". Prior to this issue, they were "Removable"
After I tested, it seems that my Vista detects every USB storage device as a normal HDD.
I don't know why but I'd appreciate any help because I have to plug-in and remove those drives often, especially flash drives.
Thank you

Hello Mickey2003
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues in Windows Vista with your USB Storage devices not showing up in the Safely Remove Hardware list. I am providing you with a link to a Microsoft Hotfix for this very issue titled An external USB storage device may not appear in the Safely Remove Hardware list in the notification.... I would recommend you review the KB document and ensure you a familiar with the Hotfix information and run the hotfix to resolve the issue you are experiencing.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

H800-30ea,USB Drives works, but does not show up in "Safely Remove Hardware"

hi
USB Drives works, but does not show up in "Safely Remove Hardware"
Here are my symptom
- USB Flash Drives , USB External HDD works normally
- I can see them in "My Computer"
- I can open "Safely Remove Hardware" via Run Command, but there is no device in the list
- They show up as "Disk drives" in device manager
- When I right click their icons in "My Computer", there is no option to "Eject" them
- In "Disk Management", they show up as "Basic". Prior to this issue, they were "Removable"
After I tested, it seems that my Vista detects every USB storage device as a normal HDD.
I don't know why but I'd appreciate any help because I have to plug-in and remove those drives often, especially flash drives.
Thank you

Hello takpesar,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues in Windows Vista with your USB Storage devices not showing up in the Safely Remove Hardware list. I am providing you with a link to a Microsoft Hotfix for this very issue titled An external USB storage device may not appear in the Safely Remove Hardware list in the notification.... I would recommend you review the KB document and ensure you a familiar with the Hotfix information and run the hotfix to resolve the issue you are experiencing.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

My mouse works but does not control the software

my mouse works but does not control the software

What is it doing? The clicks not work or the cursor not move... etc
Need more info.
Regards,
Captfred

Downloaded iTunes 11.0.2.26,the print CD jewel case does not print right,all the songs listed are printed in about a 1/2in. space,how can I get it to print right

Downloaded iTunes 11.0.2.26,the print CD jewel case does not print right,all the songs listed are printed in about a 1/2in. space,how can I get it to print right

I recently upgraded to itunes 11.0.1.12 and that fixed the CD Jewel Case Insert song titles problem. Thanks itunes. It's working great!!.

I can print word documents but can not print email messages

i can print word documents but can not print email messages
I am using an officejet 4500 wireless on Windows 7

I called HP and after being on the phone for 1 1/2 hrs They reinstalled my printer and I printed an alignment page without then I tried to print arouble I was also able to scan a page to HP. When I tried to print something from my email it barely printed 2 faded lines and that was it I openrd my word documents and was able to print a clear copy. HP told me my cartrige was empty so I changed my cartridge with no results it was the same. I use refill CATRIDGES AND NEVER HAD ANY PROBLEMS but they told me they can ruin a printer. I told them I would purchease new HP cartridges and they we agreed they would call me back on Monday to determine if my problems were solved with the new cartridges. What I don't understand is how I can print documents but not emails. HELP

Flash Player does not launch full screen upon Windows restart

We have a Flash application file (flash.exe file) saved on the Desktop of our client's 46" touchscreen. We've created a shortcut to the application in the Windows Start/All Programs/Startup menu as we have 4 reboots scheduled during the day for this application. Upon reboot, the application does not launch full screen but if I cancel out of the application through the Task Manager and go to the Startup menu and double click the shortcut to the exe file, the application launches full screen. The size of the screen and application is 1920x1080.
Other information:
Windows XP SP3
Flash Player 10
(Please note I have fixed the Window System Error that you see in this screen shot)
Thank you for your help!

Do you have set it to Maximized ?

Safari does not retain Full Screen state

Yosemite: version 10.10 (14A389)
Safari: version 8.0 (10600.1.25)
Safari does not retain Full Screen state when opening, or re-opening, quitting and restarting Safari, or rebooting the computer, even when the last state was in Full Screen.
Under Lion, this did not happen. Safari would always keep the last state used even after quitting, or rebooting the iMac.
In God's Harmony

navigate to your Users Library folder ( it is hidden , so use Finder's "go to folder" menu ) , then locate inside the Library folder "preferences", search for com.apple.safari and delete the plist you find for Safari.
then restart Safari and it should present all new Lion Options.

I can't print from firefox. The paper feeds throught the printer but does not print. The same web pages will print when I use internet explorer. And the printer works fine with word, excell etc, just not with firefox.

Whenever I try to print any page opened in firefox it will not print. The paper feeds through the computer, but does not pring.

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

Built in print button works but does not print full screen

Similar Messages

Maybe you are looking for